Skip to contentSkip to conversation

DT support for kirkwood based Synology NAS boxes

PATCH Superseded klightspeed at killerwolves.net 4 participants 10 messages Feb 17, 2014 – Feb 18, 2014

Subsystems (4)

v4 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v4 cover DT support for kirkwood based Synology NAS boxes

This patchset adds support for around 30 kirkwood bases Synology NAS boxes. Patch #1 generalized the qnap power off driver so that it can also be used for Synology devices. Patch #2 and #3 document vendor prefixes and i2c trivial devices. Patch #4 adds the synology DT files.

v2:
Typo fix in qnap-poweroff.c
Use ricoy stock ticker instead of ricoh
Describe the lego structure of the hardware

v3:
Merge synology dtsi files into a single dtsi file

v4:
Various minor fixes to synology dtsi file

Andrew Lunn (3):
Power: Reset: Generalize qnap-poweroff to with on Synology devices.
DT: Vendor prefixes: Add ricoh, ssi and synology
DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix

Ben Peddell (1):
ARM: Kirkwood: Add support for many Synology NAS devices

 .../devicetree/bindings/i2c/trivial-devices.txt    |   3 +-
 .../bindings/power_supply/qnap-poweroff.txt        |   5 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   3 +
 arch/arm/boot/dts/Makefile                         |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts               |  41 +
 arch/arm/boot/dts/kirkwood-ds110jv10.dts           |  41 +
 arch/arm/boot/dts/kirkwood-ds111.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts               |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts               |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts              |  41 +
 arch/arm/boot/dts/kirkwood-ds409.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts           |  40 +
 arch/arm/boot/dts/kirkwood-ds411.dts               |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts              |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts           |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi           | 871 +++++++++++++++++++++
 drivers/power/reset/qnap-poweroff.c                |  46 +-
 22 files changed, 1655 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
Signature · 1 line
1.8.3.2
#1 lore raw

PATCH v4 1/4 Power: Reset: Generalize qnap-poweroff to with on Synology devices.

From: Andrew Lunn <[email protected]>

The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this.

Cc Anton Vorontsov <[email protected]>
Cc Dmitry Eremin-Solenikov <[email protected]>
Cc David Woodhouse <[email protected]>
---
 .../bindings/power_supply/qnap-poweroff.txt        |  5 ++-
 drivers/power/reset/qnap-poweroff.c                | 46 +++++++++++++++++-----
 2 files changed, 40 insertions(+), 11 deletions(-)
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +4 -1
index 0347d83..af25e77 100644
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
drivers/power/reset/qnap-poweroff.c +36 -10

84 lines not on this page · raw message

Signature · 1 line
1.8.3.2
#2 lore raw

PATCH v4 1/4 Power: Reset: Generalize qnap-poweroff to with on Synology devices.

Hello-

Few nits below.

Quoted 22 lines · klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this.

Cc Anton Vorontsov <[email protected]>
Cc Dmitry Eremin-Solenikov <[email protected]>
Cc David Woodhouse <[email protected]>
---
 .../bindings/power_supply/qnap-poweroff.txt        |  5 ++-
 drivers/power/reset/qnap-poweroff.c                | 46 +++++++++++++++++-----
 2 files changed, 40 insertions(+), 11 deletions(-)
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +0 -0
index 0347d83..af25e77 100644

Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the · line 13

Quoted 9 lines
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +4 -1
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"

Hmm.. Neither 'qnap' or 'synology' are described in Documentation/devicetree/bindings/vendor-prefixes.txt. Perhaps they should be added?

Quoted 29 lines
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +0 -0
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
drivers/power/reset/qnap-poweroff.c +12 -1
index 37f56f7..10c91fa 100644
@@ -1,5 +1,5 @@
 /*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
  *
  * Copyright (C) 2012 Andrew Lunn <[email protected]>
  *
@@ -25,17 +25,42 @@
 
 #define UART1_REG(x)	(base + ((UART_##x) << 2))
 
+struct power_off_cfg {
+	u32 baud;
+	char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+	.baud = 19200,
+	.cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {

drivers/power/reset/qnap-poweroff.c line 48

Quoted 10 lines
drivers/power/reset/qnap-poweroff.c +10 -0
+	.baud = 9600,
+	.cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+	{ .compatible = "qnap,power-off",
+	  .data = (void *) &qnap_power_off_cfg,
+	},
+	{ .compatible = "synology,power-off",
+	  .data = (void *) &synology_power_off_cfg,

The casts here should not be necessary.

drivers/power/reset/qnap-poweroff.c line 55

Quoted 7 lines
drivers/power/reset/qnap-poweroff.c +5 -0
+	},
+	{}
+};
+
 static void __iomem *base;
 static unsigned long tclk;
+static struct power_off_cfg *cfg;

const?

Quoted 24 lines
drivers/power/reset/qnap-poweroff.c +4 -5
 static void qnap_power_off(void)
 {
-	/* 19200 baud divisor */
-	const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
 
 	pr_err("%s: triggering power-off...\n", __func__);
 
-	/* hijack UART1 and reset into sane state (19200,8n1) */
+	/* hijack UART1 and reset into sane state */
 	writel(0x83, UART1_REG(LCR));
 	writel(divisor & 0xff, UART1_REG(DLL));
 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +69,21 @@ static void qnap_power_off(void)
 	writel(0x00, UART1_REG(FCR));
 	writel(0x00, UART1_REG(MCR));
 
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
+	/* send the power-off command to PIC */
+	writel(cfg->cmd, UART1_REG(TX));
 }
 

drivers/power/reset/qnap-poweroff.c static void qnap_power_off(void) · line 85

Quoted 10 lines
drivers/power/reset/qnap-poweroff.c +4 -0
 static int qnap_power_off_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
 	struct clk *clk;
 	char symname[KSYM_NAME_LEN];
 
+	const struct of_device_id *match =
+		of_match_node(qnap_power_off_of_match_table, np);
+	cfg = (struct power_off_cfg *)match->data;

This cast is not necessary.

drivers/power/reset/qnap-poweroff.c static int qnap_power_off_remove(struct platform_device *pdev) · line 127

Quoted 13 lines
drivers/power/reset/qnap-poweroff.c +0 -4
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "Missing resource");
@@ -94,10 +124,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qnap_power_off_of_match_table[] = {
-	{ .compatible = "qnap,power-off", },
-	{}
-};
 MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);

You should probably move this up above with the table.

Josh

Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
#3 lore raw

PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology

In reply to klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.

---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +3 -0
index 40ce2df..8427681 100644
@@ -72,6 +72,7 @@ ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+ricoy	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 sbs	Smart Battery System
@@ -79,11 +80,13 @@ schindler	Schindler
 sil	Silicon Image
 silabs	Silicon Laboratories
 simtek
+sii	Seiko Instruments, Inc.
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
+synology	Synology, Inc.
 ti	Texas Instruments
 tlm	Trusted Logic Mobility
 toshiba	Toshiba Corporation
Signature · 1 line
1.8.3.2
#4 lore raw

PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology

Quoted 28 lines · klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.

---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
index 40ce2df..8427681 100644
@@ -72,6 +72,7 @@ ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+ricoy	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 sbs	Smart Battery System

Documentation/devicetree/bindings/vendor-prefixes.txt schindler Schindler · line 89

Quoted 10 lines
Documentation/devicetree/bindings/vendor-prefixes.txt +2 -0
@@ -79,11 +80,13 @@ schindler	Schindler
 sil	Silicon Image
 silabs	Silicon Laboratories
 simtek
+sii	Seiko Instruments, Inc.
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
+synology	Synology, Inc.

Oh, great! Looks like this one is added (see my comment on patch 1). I'm wondering if 'qnap' should be added as well.

Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
#5 lore raw

PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology

Quoted 34 lines · Josh Cartwright
Quoted 33 lines · klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.

---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +2 -0
index 40ce2df..8427681 100644
@@ -72,6 +72,7 @@ ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+ricoy	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 sbs	Smart Battery System
@@ -79,11 +80,13 @@ schindler	Schindler
 sil	Silicon Image
 silabs	Silicon Laboratories
 simtek
+sii	Seiko Instruments, Inc.
 sirf	SiRF Technology, Inc.
Quoted 8 lines

Documentation/devicetree/bindings/vendor-prefixes.txt schindler Schindler · line 89

Quoted 5 lines
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
 snps 	Synopsys, Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
+synology	Synology, Inc.

Oh, great! Looks like this one is added (see my comment on patch 1). I'm wondering if 'qnap' should be added as well.

Do we want to use "qnap" or their ticker "qnapsz"?

#6 lore raw

PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology

Quoted 44 lines · Ben Peddell
Quoted 34 lines · Josh Cartwright
Quoted 33 lines · klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.

---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +2 -0
index 40ce2df..8427681 100644
@@ -72,6 +72,7 @@ ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+ricoy	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 sbs	Smart Battery System
@@ -79,11 +80,13 @@ schindler	Schindler
 sil	Silicon Image
 silabs	Silicon Laboratories
 simtek
+sii	Seiko Instruments, Inc.
 sirf	SiRF Technology, Inc.
Quoted 8 lines

Documentation/devicetree/bindings/vendor-prefixes.txt schindler Schindler · line 89

Quoted 5 lines
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
 snps 	Synopsys, Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
+synology	Synology, Inc.

Oh, great! Looks like this one is added (see my comment on patch 1). I'm wondering if 'qnap' should be added as well.

Quoted 2 lines

Do we want to use "qnap" or their ticker "qnapsz"?

Hi Ben

Ticker.

It might also make sense to re-arrange the order of these patches, so that this one comes first and then the power off patch. However it is not too important, because the patches are probably going to get split up and go thought different maintainers.

Andrew

#7 lore raw

PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology

In reply to klightspeed at killerwolves.net
Quoted 4 lines · klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.

You have a typo in the patch description + subject: ssi vs sii.

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140217/9c134a27/attachment-0001.sig>

#8 lore raw

PATCH v4 3/4 DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix

In reply to klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

Add the Seiko Instruments Inc S35390a to the list of trivial i2c devices. At the same time, correct the vendor prefix for ricoh, which should be the ticker symbol ricoy.

---
 Documentation/devicetree/bindings/i2c/trivial-devices.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/i2c/trivial-devices.txt +2 -1
index 1a1ac2e..5f37191 100644
@@ -56,8 +56,9 @@ ovti,ov5642		OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an
 pericom,pt7c4338	Real-time Clock Module
 plx,pex8648		48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
 ramtron,24c64		i2c serial eeprom  (24cxx)
-ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoy,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
 samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+sii,s35390a		2-wire CMOS real-time clock
 st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
Signature · 1 line
1.8.3.2
#9 lore raw

PATCH v4 4/4 ARM: Kirkwood: Add support for many Synology NAS devices

In reply to klightspeed at killerwolves.net

From: "[email protected]" <[email protected]>

Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <[email protected]> translation of the board setup file maintained by Ben Peddell <[email protected]>

The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC.

Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43.

Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply.

Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards.

---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker

v3:
Merge Synology dtsi files into single dtsi file

v4:
Various minor fixes to synology dtsi file

---
 arch/arm/boot/dts/Makefile               |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts     |  41 ++
 arch/arm/boot/dts/kirkwood-ds110jv10.dts |  41 ++
 arch/arm/boot/dts/kirkwood-ds111.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts     |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts     |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts    |  41 ++
 arch/arm/boot/dts/kirkwood-ds409.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts |  40 ++
 arch/arm/boot/dts/kirkwood-ds411.dts     |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts    |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi | 871 +++++++++++++++++++++++++++++++
 18 files changed, 1610 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
arch/arm/boot/dts/Makefile +15 -0
index 6d1e43d..e286abc 100644
@@ -90,6 +90,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-guruplug-server-plus.dtb \
 	kirkwood-ib62x0.dtb \
@@ -112,6 +124,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-nsa310a.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
arch/arm/boot/dts/kirkwood-ds109.dts new file +41 -0

41 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds110jv10.dts new file +41 -0

41 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds111.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds112.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds209.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds210.dts new file +46 -0

46 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds212.dts new file +47 -0

47 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds212j.dts new file +41 -0

41 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds409.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds409slim.dts new file +40 -0
new file mode 100644
index 0000000..1848a62
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds411.dts new file +52 -0

52 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds411j.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds411slim.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-rs212.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-rs409.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-rs411.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-synology.dtsi new file +871 -0

871 lines not on this page · raw message

Signature · 1 line
1.8.3.2