Skip to contentSkip to conversation

v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.

PATCH Superseded Denis Carikli 3 participants 9 messages Feb 21, 2014 – Feb 24, 2014

Subsystems (6)

v7 of 14 Superseded Latest is v14 →

lore
Share & tools
lore
#0 lore raw

PATCH v7 1/7 v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.

That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.

ChangeLog v3->v4:
- Added Laurent Pinchart's Ack.

ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Added Mauro Carvalho Chehab's Ack.
- Added documentation.

---
 .../DocBook/media/v4l/pixfmt-packed-rgb.xml        |   78 ++++++++++++++++++++
 include/uapi/linux/videodev2.h                     |    1 +
 2 files changed, 79 insertions(+)
Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +78 -0
index 166c8d6..f6a3e84 100644
@@ -279,6 +279,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
 	    <entry></entry>
 	    <entry></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-RGB666">
+	    <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry>
+	    <entry>'RGBH'</entry>
+	    <entry></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-BGR24">
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
@@ -781,6 +820,45 @@ defined in error. Drivers may interpret them as in <xref
 	    <entry></entry>
 	    <entry></entry>
 	  </row>
+	  <row><!-- id="V4L2-PIX-FMT-RGB666" -->
+	    <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry>
+	    <entry>'RGBH'</entry>
+	    <entry></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row><!-- id="V4L2-PIX-FMT-BGR24" -->
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
include/uapi/linux/videodev2.h +1 -0
index 6ae7bbe..3051d67 100644
@@ -294,6 +294,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
 #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
 #define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
+#define V4L2_PIX_FMT_RGB666  v4l2_fourcc('R', 'G', 'B', 'H') /* 18  RGB-6-6-6	  */
 #define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
 #define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
 #define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v7 2/7 staging: imx-drm: Add RGB666 support for parallel display.

Cc Greg Kroah-Hartman <[email protected]>
Cc Eric B?nard <[email protected]>
Cc Marek Vasut <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc devel at driverdev.osuosl.org
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.

ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.

ChangeLog v3->v5:
- Use the correct RGB order.

ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy of the short description.
- Rebased the patch.
- Fixed a copy-paste error in the ipu_dc_map_clear parameter.

---
 .../bindings/staging/imx-drm/fsl-imx-drm.txt       |    2 +-
 drivers/staging/imx-drm/ipu-v3/ipu-dc.c            |    9 +++++++++
 drivers/staging/imx-drm/parallel-display.c         |    2 ++
 3 files changed, 12 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt +1 -1
index b876d49..2d24425 100644
@@ -29,7 +29,7 @@ Required properties:
 - crtc: the crtc this display is connected to, see below
 Optional properties:
 - interface_pix_fmt: How this display is connected to the
-  crtc. Currently supported types: "rgb24", "rgb565", "bgr666"
+  crtc. Currently supported types: "rgb24", "rgb565", "bgr666", "rgb666"
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
drivers/staging/imx-drm/ipu-v3/ipu-dc.c +9 -0
index d0e3bc3..617e65b 100644
@@ -92,6 +92,7 @@ enum ipu_dc_map {
 	IPU_DC_MAP_GBR24, /* TVEv2 */
 	IPU_DC_MAP_BGR666,
 	IPU_DC_MAP_BGR24,
+	IPU_DC_MAP_RGB666,
 };
 
 struct ipu_dc {
@@ -155,6 +156,8 @@ static int ipu_pixfmt_to_map(u32 fmt)
 		return IPU_DC_MAP_BGR666;
 	case V4L2_PIX_FMT_BGR24:
 		return IPU_DC_MAP_BGR24;
+	case V4L2_PIX_FMT_RGB666:
+		return IPU_DC_MAP_RGB666;
 	default:
 		return -EINVAL;
 	}
@@ -404,6 +407,12 @@ int ipu_dc_init(struct ipu_soc *ipu, struct device *dev,
 	ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 1, 15, 0xff); /* green */
 	ipu_dc_map_config(priv, IPU_DC_MAP_BGR24, 0, 23, 0xff); /* blue */
 
+	/* rgb666 */
+	ipu_dc_map_clear(priv, IPU_DC_MAP_RGB666);
+	ipu_dc_map_config(priv, IPU_DC_MAP_RGB666, 0, 5, 0xfc); /* blue */
+	ipu_dc_map_config(priv, IPU_DC_MAP_RGB666, 1, 11, 0xfc); /* green */
+	ipu_dc_map_config(priv, IPU_DC_MAP_RGB666, 2, 17, 0xfc); /* red */
+
 	return 0;
 }
 
drivers/staging/imx-drm/parallel-display.c +2 -0
index 351d61d..bc2946e 100644
@@ -223,6 +223,8 @@ static int imx_pd_probe(struct platform_device *pdev)
 			imxpd->interface_pix_fmt = V4L2_PIX_FMT_RGB565;
 		else if (!strcmp(fmt, "bgr666"))
 			imxpd->interface_pix_fmt = V4L2_PIX_FMT_BGR666;
+		else if (!strcmp(fmt, "rgb666"))
+			imxpd->interface_pix_fmt = V4L2_PIX_FMT_RGB666;
 	}
 
 	imxpd->dev = &pdev->dev;
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH v7 3/7 staging: imx-drm: Correct BGR666 and the board's dts that use them.

In reply to Denis Carikli

The current BGR666 is not consistent with the other color mapings like BGR24. BGR666 should be in the same byte order than BGR24.

Cc Greg Kroah-Hartman <[email protected]>
Cc Eric B?nard <[email protected]>
Cc Marek Vasut <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc devel at driverdev.osuosl.org
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.

ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Added a better explanation of the change.

ChangeLog v5:
- New patch.

---
 arch/arm/boot/dts/imx51-apf51dev.dts    |    2 +-
 arch/arm/boot/dts/imx53-m53evk.dts      |    2 +-
 drivers/staging/imx-drm/ipu-v3/ipu-dc.c |    4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/imx51-apf51dev.dts +1 -1
index c29cfa9..bff3201 100644
@@ -19,7 +19,7 @@
 	display at di1 {
 		compatible = "fsl,imx-parallel-display";
 		crtcs = <&ipu 0>;
-		interface-pix-fmt = "bgr666";
+		interface-pix-fmt = "rgb666";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1>;
 
arch/arm/boot/dts/imx53-m53evk.dts +1 -1
index e8d11e2..a984498 100644
@@ -24,7 +24,7 @@
 		display at di1 {
 			compatible = "fsl,imx-parallel-display";
 			crtcs = <&ipu 1>;
-			interface-pix-fmt = "bgr666";
+			interface-pix-fmt = "rgb666";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ipu_disp1>;
 
drivers/staging/imx-drm/ipu-v3/ipu-dc.c +2 -2
index 617e65b..b11a2aa 100644
@@ -397,9 +397,9 @@ int ipu_dc_init(struct ipu_soc *ipu, struct device *dev,
 
 	/* bgr666 */
 	ipu_dc_map_clear(priv, IPU_DC_MAP_BGR666);
-	ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 0, 5, 0xfc); /* blue */
+	ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 0, 17, 0xfc); /* blue */
 	ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 1, 11, 0xfc); /* green */
-	ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 2, 17, 0xfc); /* red */
+	ipu_dc_map_config(priv, IPU_DC_MAP_BGR666, 2, 5, 0xfc); /* red */
 
 	/* bgr24 */
 	ipu_dc_map_clear(priv, IPU_DC_MAP_BGR24);
Signature · 1 line
1.7.9.5
#3 lore raw

PATCH v7 4/7 staging: imx-drm: Use de-active and pixelclk-active display-timings.

In reply to Denis Carikli

If de-active and/or pixelclk-active properties were set in the display-timings DT node, they were not used.

Instead the data-enable and the pixel data clock polarity were hardcoded.

This change is needed for making the eukrea-cpuimx51
QVGA display work.

Cc Eric B?nard <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc devel at driverdev.osuosl.org
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch
- val is now initialized in imx_pd_connector_get_modes

ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Removed wrong coments from the code.
- Corrected the code style of the "if (!!val)"

ChangeLog v3->v4:
- The old patch was named "staging: imx-drm: ipuv3-crtc: don't harcode some mode".
- Reworked the patch entierly: we now takes the mode flags from the device tree.

ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Ajusted the flags to match the changes in "drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*"

---
 drivers/staging/imx-drm/imx-drm.h          |    3 +++
 drivers/staging/imx-drm/ipuv3-crtc.c       |    8 ++++++--
 drivers/staging/imx-drm/parallel-display.c |   27 +++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 2 deletions(-)
drivers/staging/imx-drm/imx-drm.h +3 -0
index ae90c9c..dfdc180 100644
@@ -5,6 +5,9 @@
 
 #define IPU_PIX_FMT_GBR24	v4l2_fourcc('G', 'B', 'R', '3')
 
+#define IMXDRM_MODE_FLAG_DE_HIGH		(1<<0)
+#define IMXDRM_MODE_FLAG_PIXDATA_POSEDGE	(1<<1)
+
 struct drm_crtc;
 struct drm_connector;
 struct drm_device;
drivers/staging/imx-drm/ipuv3-crtc.c +6 -2
index 22be104..fbb3793 100644
@@ -156,8 +156,12 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
 	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
 		sig_cfg.Vsync_pol = 1;
 
-	sig_cfg.enable_pol = 1;
-	sig_cfg.clk_pol = 1;
+	if (mode->private_flags & IMXDRM_MODE_FLAG_DE_HIGH)
+		sig_cfg.enable_pol = 1;
+
+	if (mode->private_flags & IMXDRM_MODE_FLAG_PIXDATA_POSEDGE)
+		sig_cfg.clk_pol = 1;
+
 	sig_cfg.width = mode->hdisplay;
 	sig_cfg.height = mode->vdisplay;
 	sig_cfg.pixel_fmt = out_pixel_fmt;
drivers/staging/imx-drm/parallel-display.c +27 -0
index bc2946e..3f7f09d 100644
@@ -75,7 +75,34 @@ static int imx_pd_connector_get_modes(struct drm_connector *connector)
 
 	if (np) {
 		struct drm_display_mode *mode = drm_mode_create(connector->dev);
+		struct device_node *timings_np;
+		struct device_node *mode_np;
+		u32 val = 1;
+
 		of_get_drm_display_mode(np, &imxpd->mode, OF_USE_NATIVE_MODE);
+
+		timings_np = of_get_child_by_name(np, "display-timings");
+		if (timings_np) {
+			/* get the display mode node */
+			mode_np = of_parse_phandle(timings_np,
+						   "native-mode", 0);
+			if (!mode_np)
+				mode_np = of_get_next_child(timings_np, NULL);
+
+			/* set de-active to 1 if not set */
+			of_property_read_u32(mode_np, "de-active", &val);
+			if (val) {
+				imxpd->mode.private_flags |=
+					IMXDRM_MODE_FLAG_DE_HIGH;
+			}
+
+			/* set pixelclk-active to 1 if not set */
+			of_property_read_u32(mode_np, "pixelclk-active", &val);
+			if (val) {
+				imxpd->mode.private_flags |=
+					IMXDRM_MODE_FLAG_PIXDATA_POSEDGE;
+			}
+		}
 		drm_mode_copy(mode, &imxpd->mode);
 		mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
 		drm_mode_probed_add(connector, mode);
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH v7 4/7 staging: imx-drm: Use de-active and pixelclk-active display-timings.

Hi,

Quoted 45 lines · Denis Carikli

If de-active and/or pixelclk-active properties were set in the display-timings DT node, they were not used.

Instead the data-enable and the pixel data clock polarity were hardcoded.

This change is needed for making the eukrea-cpuimx51
QVGA display work.

Cc Eric B?nard <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc devel at driverdev.osuosl.org
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch
- val is now initialized in imx_pd_connector_get_modes

ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Removed wrong coments from the code.
- Corrected the code style of the "if (!!val)"

ChangeLog v3->v4:
- The old patch was named "staging: imx-drm: ipuv3-crtc: don't harcode some mode".
- Reworked the patch entierly: we now takes the mode flags from the device tree.

ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Ajusted the flags to match the changes in "drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*"

---
 drivers/staging/imx-drm/imx-drm.h          |    3 +++
 drivers/staging/imx-drm/ipuv3-crtc.c       |    8 ++++++--
 drivers/staging/imx-drm/parallel-display.c |   27 +++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 2 deletions(-)
drivers/staging/imx-drm/imx-drm.h +0 -0
index ae90c9c..dfdc180 100644

drivers/staging/imx-drm/imx-drm.h line 10

Quoted 6 lines
drivers/staging/imx-drm/imx-drm.h +3 -0
@@ -5,6 +5,9 @@
 
 #define IPU_PIX_FMT_GBR24	v4l2_fourcc('G', 'B', 'R', '3')
 
+#define IMXDRM_MODE_FLAG_DE_HIGH		(1<<0)
+#define IMXDRM_MODE_FLAG_PIXDATA_POSEDGE	(1<<1)
+

CodingStyle: spaces around operators...?

Lothar Wa?mann

Signature · 9 lines
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________
#5 lore raw

PATCH v7 5/7 staging: imx-drm: parallel display: add regulator support.

In reply to Denis Carikli
Cc Alexander Shiyan <[email protected]>
Cc Eric B?nard <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Marek Vasut <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc driverdev-devel at linuxdriverproject.org
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch and included video/of_display_timing.h

---
 .../bindings/staging/imx-drm/fsl-imx-drm.txt       |    1 +
 drivers/staging/imx-drm/parallel-display.c         |   13 +++++++++++++
 2 files changed, 14 insertions(+)
Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt +1 -0
index 2d24425..4dd7ce5 100644
@@ -28,6 +28,7 @@ Required properties:
 - compatible: Should be "fsl,imx-parallel-display"
 - crtc: the crtc this display is connected to, see below
 Optional properties:
+- display-supply : phandle to the regulator device tree node if needed.
 - interface_pix_fmt: How this display is connected to the
   crtc. Currently supported types: "rgb24", "rgb565", "bgr666", "rgb666"
 - edid: verbatim EDID data block describing attached display.
drivers/staging/imx-drm/parallel-display.c +13 -0
index 3f7f09d..d65dad4 100644
@@ -22,6 +22,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_crtc_helper.h>
+#include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
 #include <video/of_display_timing.h>
 
@@ -36,6 +37,7 @@ struct imx_parallel_display {
 	struct drm_encoder encoder;
 	struct imx_drm_encoder *imx_drm_encoder;
 	struct device *dev;
+	struct regulator *disp_reg;
 	void *edid;
 	int edid_len;
 	u32 interface_pix_fmt;
@@ -141,6 +143,9 @@ static void imx_pd_encoder_prepare(struct drm_encoder *encoder)
 {
 	struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
 
+	if (regulator_enable(imxpd->disp_reg))
+		dev_err(imxpd->dev, "Failed to enable regulator.\n");
+
 	imx_drm_crtc_panel_format(encoder->crtc, DRM_MODE_ENCODER_NONE,
 			imxpd->interface_pix_fmt);
 }
@@ -157,6 +162,10 @@ static void imx_pd_encoder_mode_set(struct drm_encoder *encoder,
 
 static void imx_pd_encoder_disable(struct drm_encoder *encoder)
 {
+	struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
+
+	if (regulator_disable(imxpd->disp_reg))
+		dev_err(imxpd->dev, "Failed to disable regulator.\n");
 }
 
 static void imx_pd_encoder_destroy(struct drm_encoder *encoder)
@@ -260,6 +269,10 @@ static int imx_pd_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	imxpd->disp_reg = devm_regulator_get(&pdev->dev, "display");
+	if (IS_ERR(imxpd->disp_reg))
+		return PTR_ERR(imxpd->disp_reg);
+
 	ret = imx_drm_encoder_add_possible_crtcs(imxpd->imx_drm_encoder, np);
 
 	platform_set_drvdata(pdev, imxpd);
Signature · 1 line
1.7.9.5
#6 lore raw

PATCH v7 6/7 ARM: dts: mbimx51sd: Add display support.

In reply to Denis Carikli

The CMO-QVGA, DVI-SVGA and DVI-VGA are added.

Cc Eric B?nard <[email protected]>
Cc Shawn Guo <[email protected]>
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Since the pingrp headers were removed, the references to it where replaced by the actual pins.
- Added the targets to arch/arm/boot/dts/Makefile

ChangeLog v5->v6:
- Reordered the Cc list.

ChangeLog v3->v5:
- Updated to new GPIO defines.
- Updated to new licenses checkpatch requirements.
- one whitespace cleanup.

ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards.
- This patch now only adds display support.
- Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem.
- rebased and reworked the dts displays addition.
- Also rebased and reworked the fsl,pins usage.

---
 arch/arm/boot/dts/Makefile                         |    3 ++
 .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts  |   55 ++++++++++++++++++++
 .../imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts  |   42 +++++++++++++++
 .../imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts   |   42 +++++++++++++++
 .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts  |   40 ++++++++++++++
 5 files changed, 182 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts
arch/arm/boot/dts/Makefile +3 -0
index 2f1c218..76f6343 100644
@@ -154,6 +154,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
 	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dtb \
+	imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dtb \
+	imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dtb \
 	imx53-ard.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts new file +55 -0

55 lines not on this page · raw message

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts new file +42 -0

42 lines not on this page · raw message

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts new file +42 -0

42 lines not on this page · raw message

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +40 -0
index 5cec4f3..bb8691c 100644
@@ -24,6 +24,15 @@
 	model = "Eukrea CPUIMX51";
 	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
 
+	display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+		status = "disabled";
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -146,6 +155,37 @@
 			>;
 		};
 
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0	  0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1	  0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2	  0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3	  0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4	  0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5	  0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6	  0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7	  0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8   0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9	  0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2       0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3       0x5
+			>;
+		};
+
 		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
 			fsl,pins = <
 				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
Signature · 1 line
1.7.9.5
#7 lore raw

PATCH v7 7/7 ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.

In reply to Denis Carikli
Cc Eric B?nard <[email protected]>
Cc Shawn Guo <[email protected]>
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.

ChangeLog v5->v6:
- Reordered the Cc list.

ChangeLog v3->v5:
- Updated to the new GPIO defines.

ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards.
- This patch now only adds backlight support.
- Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem.

---
 .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts  |    8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts +8 -0
index f37d65b..f8f5abe 100644
@@ -17,6 +17,14 @@
 	model = "Eukrea MBIMXSD51 with the CMO-QVGA Display";
 	compatible = "eukrea,mbimxsd51-baseboard-cmo-qvga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51";
 
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_1>;
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-brightness-level = <1>;
+	};
+
 	reg_lcd_3v3: lcd-en {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
Signature · 1 line
1.7.9.5
#8 lore raw
In reply to Denis Carikli
Quoted 9 lines · Denis Carikli

That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.

Denis,

I'm only responsible for taking arch/arm/boot/dts/imx* changes, and other changes should be sent to subsystem maintainers.

Shawn

Quoted 129 lines

---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.

ChangeLog v3->v4:
- Added Laurent Pinchart's Ack.

ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Added Mauro Carvalho Chehab's Ack.
- Added documentation.

---
 .../DocBook/media/v4l/pixfmt-packed-rgb.xml        |   78 ++++++++++++++++++++
 include/uapi/linux/videodev2.h                     |    1 +
 2 files changed, 79 insertions(+)
Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +78 -0
index 166c8d6..f6a3e84 100644
@@ -279,6 +279,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
 	    <entry></entry>
 	    <entry></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-RGB666">
+	    <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry>
+	    <entry>'RGBH'</entry>
+	    <entry></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-BGR24">
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
@@ -781,6 +820,45 @@ defined in error. Drivers may interpret them as in <xref
 	    <entry></entry>
 	    <entry></entry>
 	  </row>
+	  <row><!-- id="V4L2-PIX-FMT-RGB666" -->
+	    <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry>
+	    <entry>'RGBH'</entry>
+	    <entry></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row><!-- id="V4L2-PIX-FMT-BGR24" -->
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
include/uapi/linux/videodev2.h +1 -0
index 6ae7bbe..3051d67 100644
@@ -294,6 +294,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
 #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
 #define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
+#define V4L2_PIX_FMT_RGB666  v4l2_fourcc('R', 'G', 'B', 'H') /* 18  RGB-6-6-6	  */
 #define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
 #define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
 #define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
Signature · 1 line
1.7.9.5