v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.
Subsystems (6)
PATCH v8 1/7 v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
---
ChangeLog v7->v8:
- Added Mauro Carvalho Chehab back to the list of Cc
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
ChangeLog v3->v4:
- Added Laurent Pinchart's Ack.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Added Mauro Carvalho Chehab's Ack.
- Added documentation.
--- .../DocBook/media/v4l/pixfmt-packed-rgb.xml | 78 ++++++++++++++++++++ include/uapi/linux/videodev2.h | 1 + 2 files changed, 79 insertions(+)
Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +78 -0
@@ -279,6 +279,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para> <entry></entry> <entry></entry> </row> + <row id="V4L2-PIX-FMT-RGB666"> + <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry> + <entry>'RGBH'</entry> + <entry></entry> + <entry>r<subscript>5</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + </row> <row id="V4L2-PIX-FMT-BGR24"> <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry> <entry>'BGR3'</entry>
@@ -781,6 +820,45 @@ defined in error. Drivers may interpret them as in <xref <entry></entry> <entry></entry> </row> + <row><!-- id="V4L2-PIX-FMT-RGB666" --> + <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry> + <entry>'RGBH'</entry> + <entry></entry> + <entry>r<subscript>5</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + <entry></entry> + </row> <row><!-- id="V4L2-PIX-FMT-BGR24" --> <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry> <entry>'BGR3'</entry>
include/uapi/linux/videodev2.h +1 -0
@@ -294,6 +294,7 @@ struct v4l2_pix_format {#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q')/* 16 RGB-5-5-5 BE */ #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R')/* 16 RGB-5-6-5 BE */ #define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H')/* 18 BGR-6-6-6 */ +#define V4L2_PIX_FMT_RGB666 v4l2_fourcc('R', 'G', 'B', 'H')/* 18 RGB-6-6-6 */ #define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3')/* 24 BGR-8-8-8 */ #define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3')/* 24 RGB-8-8-8 */ #define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4')/* 32 BGR-8-8-8-8 */
Signature · 1 line
1.7.9.5
PATCH v8 2/7 staging: imx-drm: Add RGB666 support for parallel display.
---
ChangeLog v7->v8:
- Shrinked even more the Cc list.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
ChangeLog v3->v5:
- Use the correct RGB order.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy of the short description.
- Rebased the patch.
- Fixed a copy-paste error in the ipu_dc_map_clear parameter.
--- .../bindings/staging/imx-drm/fsl-imx-drm.txt | 2 +- drivers/staging/imx-drm/ipu-v3/ipu-dc.c | 9 +++++++++ drivers/staging/imx-drm/parallel-display.c | 2 ++ 3 files changed, 12 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt +1 -1
@@ -29,7 +29,7 @@ Required properties: - crtc: the crtc this display is connected to, see below Optional properties: - interface_pix_fmt: How this display is connected to the - crtc. Currently supported types: "rgb24", "rgb565", "bgr666" + crtc. Currently supported types: "rgb24", "rgb565", "bgr666", "rgb666" - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel
drivers/staging/imx-drm/ipu-v3/ipu-dc.c +9 -0
@@ -92,6 +92,7 @@ enum ipu_dc_map {IPU_DC_MAP_GBR24 ,/* TVEv2 */ IPU_DC_MAP_BGR666 ,IPU_DC_MAP_BGR24 , + IPU_DC_MAP_RGB666, }; struct ipu_dc {
@@ -155,6 +156,8 @@ static int ipu_pixfmt_to_map(u32 fmt)return IPU_DC_MAP_BGR666 ;case V4L2_PIX_FMT_BGR24 :return IPU_DC_MAP_BGR24 ; +case V4L2_PIX_FMT_RGB666 : +return IPU_DC_MAP_RGB666 ;default :return -EINVAL ; }
@@ -404,6 +407,12 @@ int ipu_dc_init(struct ipu_soc *ipu, struct device *dev,ipu_dc_map_config (priv,IPU_DC_MAP_BGR24 ,1 ,15 ,0xff );/* green */ ipu_dc_map_config (priv,IPU_DC_MAP_BGR24 ,0 ,23 ,0xff );/* blue */ +/* rgb666 */ +ipu_dc_map_clear (priv,IPU_DC_MAP_RGB666 ); +ipu_dc_map_config (priv,IPU_DC_MAP_RGB666 ,0 ,5 ,0xfc );/* blue */ +ipu_dc_map_config (priv,IPU_DC_MAP_RGB666 ,1 ,11 ,0xfc );/* green */ +ipu_dc_map_config (priv,IPU_DC_MAP_RGB666 ,2 ,17 ,0xfc );/* red */ +return 0 ; }
drivers/staging/imx-drm/parallel-display.c +2 -0
@@ -196,6 +196,8 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) imxpd->interface_pix_fmt =V4L2_PIX_FMT_RGB565 ; else if (!strcmp(fmt, "bgr666")) imxpd->interface_pix_fmt =V4L2_PIX_FMT_BGR666 ; + else if (!strcmp(fmt, "rgb666")) + imxpd->interface_pix_fmt =V4L2_PIX_FMT_RGB666 ; } imxpd->dev = dev;
Signature · 1 line
1.7.9.5
PATCH v8 3/7 staging: imx-drm: Correct BGR666 and the board's dts that use them.
In reply to Denis CarikliThe current BGR666 is not consistent with the other color mapings like BGR24. BGR666 should be in the same byte order than BGR24.
---
ChangeLog v7->v8:
- Shrinked even more the Cc list.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Added a better explanation of the change.
ChangeLog v5:
- New patch.
--- arch/arm/boot/dts/imx51-apf51dev.dts | 2 +- arch/arm/boot/dts/imx53-m53evk.dts | 2 +- drivers/staging/imx-drm/ipu-v3/ipu-dc.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/imx51-apf51dev.dts +1 -1
@@ -19,7 +19,7 @@ display at di1 { compatible = "fsl,imx-parallel-display"; crtcs = <&ipu 0>; - interface-pix-fmt = "bgr666"; + interface-pix-fmt = "rgb666"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1>;
arch/arm/boot/dts/imx53-m53evk.dts +1 -1
@@ -24,7 +24,7 @@ display1: display at di1 { compatible = "fsl,imx-parallel-display"; crtcs = <&ipu 1>; - interface-pix-fmt = "bgr666"; + interface-pix-fmt = "rgb666"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1>;
drivers/staging/imx-drm/ipu-v3/ipu-dc.c +2 -2
@@ -397,9 +397,9 @@ int ipu_dc_init(struct ipu_soc *ipu, struct device *dev,/* bgr666 */ ipu_dc_map_clear (priv,IPU_DC_MAP_BGR666 ); -ipu_dc_map_config (priv,IPU_DC_MAP_BGR666 ,0 ,5 ,0xfc );/* blue */ +ipu_dc_map_config (priv,IPU_DC_MAP_BGR666 ,0 ,17 ,0xfc );/* blue */ ipu_dc_map_config (priv,IPU_DC_MAP_BGR666 ,1 ,11 ,0xfc );/* green */ -ipu_dc_map_config (priv,IPU_DC_MAP_BGR666 ,2 ,17 ,0xfc );/* red */ +ipu_dc_map_config (priv,IPU_DC_MAP_BGR666 ,2 ,5 ,0xfc );/* red */ /* bgr24 */ ipu_dc_map_clear (priv,IPU_DC_MAP_BGR24 );
Signature · 1 line
1.7.9.5
PATCH v8 4/7 staging: imx-drm: Use de-active and pixelclk-active display-timings.
In reply to Denis CarikliIf de-active and/or pixelclk-active properties were set in the display-timings DT node, they were not used.
Instead the data-enable and the pixel data clock polarity were hardcoded.
This change is needed for making the eukrea-cpuimx51
QVGA display work.
---
ChangeLog v7->v8:
- Changed one Cc
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch
- val is now initialized in imx_pd_connector_get_modes
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Removed wrong coments from the code.
- Corrected the code style of the "if (!!val)"
ChangeLog v3->v4:
- The old patch was named "staging: imx-drm: ipuv3-crtc: don't harcode some mode".
- Reworked the patch entierly: we now takes the mode flags from the device tree.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Ajusted the flags to match the changes in "drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*"
--- drivers/staging/imx-drm/imx-drm.h | 3 +++ drivers/staging/imx-drm/ipuv3-crtc.c | 8 ++++++-- drivers/staging/imx-drm/parallel-display.c | 27 +++++++++++++++++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-)
drivers/staging/imx-drm/imx-drm.h +3 -0
@@ -5,6 +5,9 @@#define IPU_PIX_FMT_GBR24 v4l2_fourcc('G', 'B', 'R', '3') +#define IMXDRM_MODE_FLAG_DE_HIGH (1 << 0) +#define IMXDRM_MODE_FLAG_PIXDATA_POSEDGE (1 << 1) +struct device_node ;struct drm_crtc ;struct drm_connector ;
drivers/staging/imx-drm/ipuv3-crtc.c +6 -2
@@ -157,8 +157,12 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,if (mode->flags &DRM_MODE_FLAG_PVSYNC ) sig_cfg.Vsync_pol =1 ; - sig_cfg.enable_pol =1 ; - sig_cfg.clk_pol =1 ; +if (mode->private_flags &IMXDRM_MODE_FLAG_DE_HIGH ) + sig_cfg.enable_pol =1 ; + +if (mode->private_flags &IMXDRM_MODE_FLAG_PIXDATA_POSEDGE ) + sig_cfg.clk_pol =1 ; + sig_cfg.width = mode->hdisplay; sig_cfg.height = mode->vdisplay; sig_cfg.pixel_fmt = out_pixel_fmt;
drivers/staging/imx-drm/parallel-display.c +27 -0
@@ -69,7 +69,34 @@ static int imx_pd_connector_get_modes(struct drm_connector *connector)if (np) {struct drm_display_mode *mode =drm_mode_create (connector->dev); +struct device_node *timings_np; +struct device_node *mode_np; +u32 val =1 ; +of_get_drm_display_mode (np, &imxpd->mode,OF_USE_NATIVE_MODE ); + + timings_np =of_get_child_by_name (np,"display-timings" ); +if (timings_np) { +/* get the display mode node */ + mode_np =of_parse_phandle (timings_np, +"native-mode" ,0 ); +if (!mode_np) + mode_np =of_get_next_child (timings_np,NULL ); + +/* set de-active to 1 if not set */ +of_property_read_u32 (mode_np,"de-active" , &val); +if (val) { + imxpd->mode.private_flags |= +IMXDRM_MODE_FLAG_DE_HIGH ; + } + +/* set pixelclk-active to 1 if not set */ +of_property_read_u32 (mode_np,"pixelclk-active" , &val); +if (val) { + imxpd->mode.private_flags |= +IMXDRM_MODE_FLAG_PIXDATA_POSEDGE ; + } + }drm_mode_copy (mode, &imxpd->mode); mode->type |=DRM_MODE_TYPE_DRIVER |DRM_MODE_TYPE_PREFERRED ,drm_mode_probed_add (connector, mode);
Signature · 1 line
1.7.9.5
PATCH v8 4/7 staging: imx-drm: Use de-active and pixelclk-active display-timings.
Hi,
Quoted 9 lines · Denis Carikli
If de-active and/or pixelclk-active properties were set in the display-timings DT node, they were not used.
Instead the data-enable and the pixel data clock polarity were hardcoded.
This change is needed for making the eukrea-cpuimx51
QVGA display work.
I just tried this patch on our hardware and found that the pixelclock polarity is inverse to what the documentation says.
Your patch sets the 'clk_pol' variable in positive logic, while it is interpreted in negative logic when converted to the final register value in drivers/staging/imx-drm/ipu-v3/ipu-di.c:
if (!(sig->clk_pol)) di_gen |= DI_GEN_POLARITY_DISP_CLK;
IMO this should be
if (sig->clk_pol) di_gen |= DI_GEN_POLARITY_DISP_CLK;
Did you actually measure the resulting clock signal and LCD data?
Lothar Wa?mann
Signature · 9 lines
___________________________________________________________ Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch?ftsf?hrer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info at karo-electronics.de ___________________________________________________________
PATCH v8 5/7 staging: imx-drm: parallel display: add regulator support.
In reply to Denis Carikli---
ChangeLog v7->v8:
- Shrinked even more the Cc list.
- Rebased.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch and included video/of_display_timing.h
--- .../bindings/staging/imx-drm/fsl-imx-drm.txt | 1 + drivers/staging/imx-drm/parallel-display.c | 13 +++++++++++++ 2 files changed, 14 insertions(+)
Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt +1 -0
@@ -28,6 +28,7 @@ Required properties: - compatible: Should be "fsl,imx-parallel-display" - crtc: the crtc this display is connected to, see below Optional properties: +- display-supply : phandle to the regulator device tree node if needed. - interface_pix_fmt: How this display is connected to the crtc. Currently supported types: "rgb24", "rgb565", "bgr666", "rgb666" - edid: verbatim EDID data block describing attached display.
drivers/staging/imx-drm/parallel-display.c +13 -0
@@ -23,6 +23,7 @@#include <drm/drmP.h> #include <drm/drm_fb_helper.h> #include <drm/drm_crtc_helper.h> +#include <linux/regulator/consumer.h> #include <linux/videodev2.h> #include <video/of_display_timing.h>
@@ -35,6 +36,7 @@ struct imx_parallel_display {struct drm_connector connector;struct drm_encoder encoder;struct device *dev; +struct regulator *disp_reg;void *edid;int edid_len;u32 interface_pix_fmt;
@@ -129,6 +131,9 @@ static void imx_pd_encoder_prepare(struct drm_encoder *encoder) {struct imx_parallel_display *imxpd =enc_to_imxpd (encoder); +if (regulator_enable (imxpd->disp_reg)) +dev_err (imxpd->dev,"Failed to enable regulator.\n" ); +imx_drm_panel_format (encoder, imxpd->interface_pix_fmt); }
@@ -144,6 +149,10 @@ static void imx_pd_encoder_mode_set(struct drm_encoder *encoder,static void imx_pd_encoder_disable (struct drm_encoder *encoder) { +struct imx_parallel_display *imxpd =enc_to_imxpd (encoder); + +if (regulator_disable (imxpd->disp_reg)) +dev_err (imxpd->dev,"Failed to disable regulator.\n" ); }static struct drm_connector_funcs imx_pd_connector_funcs = {
@@ -233,6 +242,10 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)if (ret)return ret; + imxpd->disp_reg =devm_regulator_get (dev,"display" ); +if (IS_ERR (imxpd->disp_reg)) +return PTR_ERR (imxpd->disp_reg); +dev_set_drvdata (dev, imxpd);return 0 ;
Signature · 1 line
1.7.9.5
PATCH v8 6/7 ARM: dts: mbimx51sd: Add display support.
In reply to Denis CarikliThe CMO-QVGA, DVI-SVGA and DVI-VGA are added.
---
ChangeLog v7->v8:
- Rebased the patch: added the now required imx-drm node.
- Adapted the svga clock-frequency value in order to still be able to display an image after the following commit:
"imx-drm: ipu-v3: more inteligent DI clock selection"
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Since the pingrp headers were removed, the references to it where replaced by the actual pins.
- Added the targets to arch/arm/boot/dts/Makefile
ChangeLog v5->v6:
- Reordered the Cc list.
ChangeLog v3->v5:
- Updated to new GPIO defines.
- Updated to new licenses checkpatch requirements.
- one whitespace cleanup.
ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards.
- This patch now only adds display support.
- Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem.
- rebased and reworked the dts displays addition.
- Also rebased and reworked the fsl,pins usage.
--- arch/arm/boot/dts/Makefile | 3 + .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts | 59 ++++++++++++++++++++ .../imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts | 46 +++++++++++++++ .../imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts | 46 +++++++++++++++ .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 47 ++++++++++++++++ 5 files changed, 201 insertions(+) create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts
arch/arm/boot/dts/Makefile +3 -0
@@ -177,6 +177,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ + imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dtb \ + imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dtb \ + imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dtb \ imx53-ard.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts new file +59 -0
59 lines not on this page · raw message
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts new file +46 -0
46 lines not on this page · raw message
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts new file +46 -0
46 lines not on this page · raw message
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +47 -0
65 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v8 7/7 ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.
In reply to Denis Carikli---
ChangeLog v6->v7:
- Shrinked even more the Cc list.
ChangeLog v5->v6:
- Reordered the Cc list.
ChangeLog v3->v5:
- Updated to the new GPIO defines.
ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards.
- This patch now only adds backlight support.
- Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem.
--- .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts +8 -0
@@ -17,6 +17,14 @@ model = "Eukrea MBIMXSD51 with the CMO-QVGA Display"; compatible = "eukrea,mbimxsd51-baseboard-cmo-qvga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51"; + backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_1>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + default-brightness-level = <1>; + }; + reg_lcd_3v3: lcd-en { compatible = "regulator-fixed"; pinctrl-names = "default";
Signature · 1 line
1.7.9.5