Documentation, intel_pstate: Add a description of the intel_pstate internal governors
Subsystems (2)
PATCH 1/1 Documentation, intel_pstate: Add a description of the intel_pstate internal governors
The current documentation is incomplete wrt the intel_pstate internal governors. The confusion comes from the general use internal governors which also use the names performance and powersave. This patch differentiates between the two sets of governors.
--- Documentation/cpu-freq/governors.txt | 2 +- Documentation/cpu-freq/intel-pstate.txt | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-)
Documentation/cpu-freq/governors.txt +1 -1
@@ -36,7 +36,7 @@ Contents: 1. What Is A CPUFreq Governor? ============================== -Most cpufreq drivers (in fact, all except one, longrun) or even most +Most cpufreq drivers (except the intel_pstate and longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". So
Documentation/cpu-freq/intel-pstate.txt +8 -0
@@ -9,6 +9,14 @@ assumed to implement internal governors by the cpufreq core. All the logic for selecting the current P state is contained within the driver; no external governor is used by the cpufreq core. +The Intel P-state driver has two internal governors, performance and +powersave. These governors differ from the general use governors of the +same name in the kernel. The internal performance governor sets the +max_perf_pct and min_perf_pct to 100; that is, the governor selects the +highest available P state to maximize the performance of the core. The +internal powersave governor, selects the appropriate P state based on the +current load on the CPU. + Intel SandyBridge+ processors are supported. New sysfs files for controlling P state selection have been added to
Signature · 1 line
1.7.9.3
Viresh Kumar
maintainerQuoted 39 lines · Prarit Bhargava
The current documentation is incomplete wrt the
intel_pstateinternal governors. The confusion comes from the general use internal governors which also use the names performance and powersave. This patch differentiates between the two sets of governors.Cc Dirk Brandewie <[email protected]>Cc Randy Dunlap <[email protected]>Cc Russell King <[email protected]>Cc Jesper Nilsson <[email protected]>Cc Viresh Kumar <[email protected]>Cc "David S. Miller" <[email protected]>Cc Ramkumar Ramachandra <[email protected]>Cc "Rafael J. Wysocki" <[email protected]>Signed-off-by Prarit Bhargava <[email protected]>--- Documentation/cpu-freq/governors.txt | 2 +- Documentation/cpu-freq/intel-pstate.txt | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-)Documentation/cpu-freq/governors.txt +1
-1@@ -36,7 +36,7 @@ Contents: 1. What Is A CPUFreq Governor? ============================== -Most cpufreq drivers (in fact, all except one, longrun) or even most +Most cpufreq drivers (except the intel_pstate and longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". SoDocumentation/cpu-freq/intel-pstate.txt +0
-0
Documentation/cpu-freq/intel-pstate.txt assumed to implement internal governors by the cpufreq core. All the · line 13
Quoted 5 lines
Documentation/cpu-freq/intel-pstate.txt +2
-0@@ -9,6 +9,14 @@ assumed to implement internal governors by the cpufreq core. All the logic for selecting the current P state is contained within the driver; no external governor is used by the cpufreq core. +The Intel P-state driver has two internal governors, performance and +powersave. These governors differ from the general use governors of the
s/general use/generally used ??
Quoted 12 lines
Documentation/cpu-freq/intel-pstate.txt +6
-1+same name in the kernel. The internal performance governor sets the +max_perf_pct and min_perf_pct to 100; that is, the governor selects the +highest available P state to maximize the performance of the core. The +internal powersave governor, selects the appropriate P state based on the +current load on the CPU. + Intel SandyBridge+ processors are supported. New sysfs files for controlling P state selection have been added to --1.7.9.3
PATCH 1/1 Documentation, intel_pstate: Add a description of the intel_pstate internal governors [v2]
The current documentation is incomplete wrt the intel_pstate internal governors. The confusion comes from the general use internal governors which also use the names performance and powersave. This patch differentiates between the two sets of governors.
[v2]: text update
--- Documentation/cpu-freq/governors.txt | 2 +- Documentation/cpu-freq/intel-pstate.txt | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-)
Documentation/cpu-freq/governors.txt +1 -1
@@ -36,7 +36,7 @@ Contents: 1. What Is A CPUFreq Governor? ============================== -Most cpufreq drivers (in fact, all except one, longrun) or even most +Most cpufreq drivers (except the intel_pstate and longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". So
Documentation/cpu-freq/intel-pstate.txt +8 -0
@@ -9,6 +9,14 @@ assumed to implement internal governors by the cpufreq core. All the logic for selecting the current P state is contained within the driver; no external governor is used by the cpufreq core. +The Intel P-state driver has two internal governors, performance and +powersave. These governors differ from the generally used governors of the +same name in the kernel. The internal performance governor sets the +max_perf_pct and min_perf_pct to 100; that is, the governor selects the +highest available P state to maximize the performance of the core. The +internal powersave governor, selects the appropriate P state based on the +current load on the CPU. + Intel SandyBridge+ processors are supported. New sysfs files for controlling P state selection have been added to
Signature · 1 line
1.7.9.3
Re: [PATCH] Documentation, intel_pstate: Add a description of the intel_pstate internal governors [v2]
Quoted 5 lines · Prarit Bhargava
The current documentation is incomplete wrt the
intel_pstateinternal governors. The confusion comes from the general use internal governors which also use the names performance and powersave. This patch differentiates between the two sets of governors.
Quoted 12 lines
Cc Viresh Kumar <[email protected]>Cc Dirk Brandewie <[email protected]>Cc Randy Dunlap <[email protected]>Cc Russell King <[email protected]>Cc Jesper Nilsson <[email protected]>Cc Viresh Kumar <[email protected]>Cc "David S. Miller" <[email protected]>Cc Ramkumar Ramachandra <[email protected]>Cc "Rafael J. Wysocki" <[email protected]>Signed-off-by Prarit Bhargava <[email protected]>
Quoted 39 lines
[v2]: text update
--- Documentation/cpu-freq/governors.txt | 2 +- Documentation/cpu-freq/intel-pstate.txt | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-)Documentation/cpu-freq/governors.txt +1
-1@@ -36,7 +36,7 @@ Contents: 1. What Is A CPUFreq Governor? ============================== -Most cpufreq drivers (in fact, all except one, longrun) or even most +Most cpufreq drivers (except the intel_pstate and longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". SoDocumentation/cpu-freq/intel-pstate.txt +8
-0@@ -9,6 +9,14 @@ assumed to implement internal governors by the cpufreq core. All the logic for selecting the current P state is contained within the driver; no external governor is used by the cpufreq core. +The Intel P-state driver has two internal governors, performance and +powersave. These governors differ from the generally used governors of the +same name in the kernel. The internal performance governor sets the +max_perf_pct and min_perf_pct to 100; that is, the governor selects the +highest available P state to maximize the performance of the core. The +internal powersave governor, selects the appropriate P state based on the +current load on the CPU. + Intel SandyBridge+ processors are supported. New sysfs files for controlling P state selection have been added to
Randy Dunlap
reviewerRe: [PATCH] Documentation, intel_pstate: Add a description of the intel_pstate internal governors [v2]
In reply to Prarit BhargavaQuoted 41 lines · Prarit Bhargava
The current documentation is incomplete wrt the
intel_pstateinternal governors. The confusion comes from the general use internal governors which also use the names performance and powersave. This patch differentiates between the two sets of governors.Cc Viresh Kumar <[email protected]>Cc Dirk Brandewie <[email protected]>Cc Randy Dunlap <[email protected]>Cc Russell King <[email protected]>Cc Jesper Nilsson <[email protected]>Cc Viresh Kumar <[email protected]>Cc "David S. Miller" <[email protected]>Cc Ramkumar Ramachandra <[email protected]>Cc "Rafael J. Wysocki" <[email protected]>Signed-off-by Prarit Bhargava <[email protected]>[v2]: text update
--- Documentation/cpu-freq/governors.txt | 2 +- Documentation/cpu-freq/intel-pstate.txt | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-)Documentation/cpu-freq/governors.txt +1
-1@@ -36,7 +36,7 @@ Contents: 1. What Is A CPUFreq Governor? ============================== -Most cpufreq drivers (in fact, all except one, longrun) or even most +Most cpufreq drivers (except the intel_pstate and longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". SoDocumentation/cpu-freq/intel-pstate.txt +0
-0
Documentation/cpu-freq/intel-pstate.txt assumed to implement internal governors by the cpufreq core. All the · line 17
Quoted 9 lines
Documentation/cpu-freq/intel-pstate.txt +6
-0@@ -9,6 +9,14 @@ assumed to implement internal governors by the cpufreq core. All the logic for selecting the current P state is contained within the driver; no external governor is used by the cpufreq core. +The Intel P-state driver has two internal governors, performance and +powersave. These governors differ from the generally used governors of the +same name in the kernel. The internal performance governor sets the +max_perf_pct and min_perf_pct to 100; that is, the governor selects the +highest available P state to maximize the performance of the core. The +internal powersave governor, selects the appropriate P state based on the
no comma here ---------------^
Quoted 6 lines
Documentation/cpu-freq/intel-pstate.txt +2
-0+current load on the CPU. + Intel SandyBridge+ processors are supported. New sysfs files for controlling P state selection have been added to
Signature · 1 line
~Randy
PATCH 1/1 Documentation, intel_pstate: Add a description of the intel_pstate internal governors [v3]
The current documentation is incomplete wrt the intel_pstate internal governors. The confusion comes from the general use internal governors which also use the names performance and powersave. This patch differentiates between the two sets of governors.
[v2]: text update
[v3]: text update
--- Documentation/cpu-freq/governors.txt | 2 +- Documentation/cpu-freq/intel-pstate.txt | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-)
Documentation/cpu-freq/governors.txt +1 -1
@@ -36,7 +36,7 @@ Contents: 1. What Is A CPUFreq Governor? ============================== -Most cpufreq drivers (in fact, all except one, longrun) or even most +Most cpufreq drivers (except the intel_pstate and longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". So
Documentation/cpu-freq/intel-pstate.txt +8 -0
@@ -9,6 +9,14 @@ assumed to implement internal governors by the cpufreq core. All the logic for selecting the current P state is contained within the driver; no external governor is used by the cpufreq core. +The Intel P-state driver has two internal governors, performance and +powersave. These governors differ from the generally used governors of the +same name in the kernel. The internal performance governor sets the +max_perf_pct and min_perf_pct to 100; that is, the governor selects the +highest available P state to maximize the performance of the core. The +internal powersave governor selects the appropriate P state based on the +current load on the CPU. + Intel SandyBridge+ processors are supported. New sysfs files for controlling P state selection have been added to
Signature · 1 line
1.7.9.3