Skip to contentSkip to conversation

meta-yocto-bsp: enable the jffs2 for mpc8315e-rdb board

PATCH Superseded Kevin Hao 3 participants 8 messages Jun 13, 2014 – Jun 14, 2014

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Kevin Hao

author
#0 lore raw

cover meta-yocto-bsp: enable the jffs2 for mpc8315e-rdb board

Hi,

This tries to enable the jffs2 support for the mpc8315e-rdb board. I have tested the jffs2 with the following steps and it worked perfectly.

1. root@mpc8315e-rdb:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00800000 00010000 "fe000000.flash"
mtd1: 00100000 00004000 "u-boot"
mtd2: 00300000 00004000 "kernel"
mtd3: 01c00000 00004000 "fs"

2. root@mpc8315e-rdb:~# flash_eraseall /dev/mtd3
flash_eraseall has been replaced by flash_erase <mtddev> 0 0; please use it Erasing 16 Kibyte @ 1bec000 -- 99 % complete flash_erase: Skipping bad block at 01bf0000
flash_erase: Skipping bad block at 01bf4000
flash_erase: Skipping bad block at 01bf8000
flash_erase: Skipping bad block at 01bfc000
Erasing 16 Kibyte @ 1bfc000 -- 100 % complete

3. root@mpc8315e-rdb:~# flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3

4. Then boot with a jffs2 rootfs

5. root@mpc8315e-rdb:~# cat /proc/cmdline root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200 root@mpc8315e-rdb:~#

root@mpc8315e-rdb:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=59136k,nr_inodes=14784,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)

The following changes since commit 8e0c54cd0e82ffe120f84f495101cd29e6fd06bf:

bitbake: bb/utils: fix contains_any() (2014-06-12 17:47:59 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib hao/master

for you to fetch changes up to 7984d3ab156e0a1a50837ec737dfb13defa27a5c:

mpc8315e-rdb: add the jffs2 image support (2014-06-13 12:24:10 +0800)

----------------------------------------------------------------
Kevin Hao (2):
mpc8315e-rdb: bump to linux-yocto 3.14
mpc8315e-rdb: add the jffs2 image support

 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf                 | 5 ++++-
 meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.14.bbappend | 3 +++
 2 files changed, 7 insertions(+), 1 deletion(-)

Thanks,
Kevin

author
#1 lore raw

PATCH 1/2 mpc8315e-rdb: bump to linux-yocto 3.14

---
 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf                 | 2 +-
 meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.14.bbappend | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)
meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf +1 -1
index ab1eaa910143..ef76f2a755c0 100644
@@ -14,7 +14,7 @@ SERIAL_CONSOLE = "115200 ttyS0"
 
 MACHINE_FEATURES = "keyboard pci ext2 ext3 serial"
 
-PREFERRED_VERSION_linux-yocto ?= "3.10%"
+PREFERRED_VERSION_linux-yocto ?= "3.14%"
 PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
 
 PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.14.bbappend +3 -0
index e0964eb40a47..f218bb15276d 100644
@@ -2,6 +2,7 @@ KBRANCH_genericx86  = "standard/common-pc/base"
 KBRANCH_genericx86-64  = "standard/common-pc-64/base"
 KBRANCH_edgerouter = "standard/edgerouter"
 KBRANCH_beaglebone = "standard/beaglebone"
+KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
 
 KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
@@ -10,8 +11,10 @@ SRCREV_machine_genericx86 ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 SRCREV_machine_genericx86-64 ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 SRCREV_machine_edgerouter ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 SRCREV_machine_beaglebone ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
+SRCREV_machine_mpc8315e-rdb ?= "0143c6ebb4a2d63b241df5f608b19f483f7eb9e0"
 
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
 COMPATIBLE_MACHINE_edgerouter = "edgerouter"
 COMPATIBLE_MACHINE_beaglebone = "beaglebone"
+COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
Signature · 1 line
1.9.3
author
#2 lore raw

PATCH 2/2 mpc8315e-rdb: add the jffs2 image support

In reply to Kevin Hao

There is a 32M NAND flash on this board, so it would be convenient that a jffs2 image is created by default. Also change the default image type from "tar.gz" to "tar.bz2" in order to be compatible with the beaglebone black and edgerouter BSP.

---
 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf | 3 +++
 1 file changed, 3 insertions(+)
meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf +3 -0
index ef76f2a755c0..43bdce4b1c5b 100644
@@ -28,3 +28,6 @@ UBOOT_ENTRYPOINT = "0x00000000"
 KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/mpc8315erdb.dts"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+
+IMAGE_FSTYPES ?= "jffs2 tar.bz2"
+JFFS2_ERASEBLOCK = "0x4000"
Signature · 1 line
1.9.3
#3 lore raw
In reply to Kevin Hao
Quoted 27 lines · Kevin Hao

Hi,

This tries to enable the jffs2 support for the mpc8315e-rdb board. I have tested the jffs2 with the following steps and it worked perfectly.

1. root@mpc8315e-rdb:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00800000 00010000 "fe000000.flash"
mtd1: 00100000 00004000 "u-boot"
mtd2: 00300000 00004000 "kernel"
mtd3: 01c00000 00004000 "fs"

2. root@mpc8315e-rdb:~# flash_eraseall /dev/mtd3
flash_eraseall has been replaced by flash_erase <mtddev> 0 0; please use it Erasing 16 Kibyte @ 1bec000 -- 99 % complete flash_erase: Skipping bad block at 01bf0000
flash_erase: Skipping bad block at 01bf4000
flash_erase: Skipping bad block at 01bf8000
flash_erase: Skipping bad block at 01bfc000
Erasing 16 Kibyte @ 1bfc000 -- 100 % complete

3. root@mpc8315e-rdb:~# flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3

4. Then boot with a jffs2 rootfs

5. root@mpc8315e-rdb:~# cat /proc/cmdline root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200 root@mpc8315e-rdb:~#

Quoted 10 lines
root@mpc8315e-rdb:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=59136k,nr_inodes=14784,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)

Can you please put this information into the README.hardware in meta-yocto-bsp so that others can find it, its useful to know how to use jffs2 on the default...

Cheers,

Richard

#4 lore raw
Quoted 39 lines · Richard Purdie
Quoted 27 lines · Kevin Hao

Hi,

This tries to enable the jffs2 support for the mpc8315e-rdb board. I have tested the jffs2 with the following steps and it worked perfectly.

1. root@mpc8315e-rdb:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00800000 00010000 "fe000000.flash"
mtd1: 00100000 00004000 "u-boot"
mtd2: 00300000 00004000 "kernel"
mtd3: 01c00000 00004000 "fs"

2. root@mpc8315e-rdb:~# flash_eraseall /dev/mtd3
flash_eraseall has been replaced by flash_erase <mtddev> 0 0; please use it Erasing 16 Kibyte @ 1bec000 -- 99 % complete flash_erase: Skipping bad block at 01bf0000
flash_erase: Skipping bad block at 01bf4000
flash_erase: Skipping bad block at 01bf8000
flash_erase: Skipping bad block at 01bfc000
Erasing 16 Kibyte @ 1bfc000 -- 100 % complete

3. root@mpc8315e-rdb:~# flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3

4. Then boot with a jffs2 rootfs

5. root@mpc8315e-rdb:~# cat /proc/cmdline root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200 root@mpc8315e-rdb:~#

Quoted 10 lines
root@mpc8315e-rdb:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=59136k,nr_inodes=14784,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
Quoted 3 lines

Can you please put this information into the README.hardware in meta-yocto-bsp so that others can find it, its useful to know how to use jffs2 on the default...

Agreed.

Bruce

Quoted 5 lines

Cheers,

Richard

author
#5 lore raw
Quoted 6 lines · Bruce Ashfield
Quoted 3 lines · Richard Purdie

Can you please put this information into the README.hardware in meta-yocto-bsp so that others can find it, its useful to know how to use jffs2 on the default...

Agreed.

OK, will do.

Thanks,
Kevin

#6 lore raw
In reply to Kevin Hao
Quoted 4 lines · Kevin Hao

Hi,

This tries to enable the jffs2 support for the mpc8315e-rdb board. I have tested the jffs2 with the following steps and it worked perfectly.

The other point to add on this review/patch series, is that for it to fully work out of the box, it needs a merge of some kernel patches that Kevin sent to linux-yocto a couple of days ago.

To make sure that things are coordinated, I can queue this series and send it along with my kernel SRCREV updates to include those patches.

Obviously, I won't queue it until Kevin udpates README.hardware and sends a quick v2 of the changes.

Does that sound acceptable to everyone ?

Bruce

Quoted 58 lines

1. root@mpc8315e-rdb:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00800000 00010000 "fe000000.flash"
mtd1: 00100000 00004000 "u-boot"
mtd2: 00300000 00004000 "kernel"
mtd3: 01c00000 00004000 "fs"

2. root@mpc8315e-rdb:~# flash_eraseall /dev/mtd3
flash_eraseall has been replaced by flash_erase <mtddev> 0 0; please use it Erasing 16 Kibyte @ 1bec000 -- 99 % complete flash_erase: Skipping bad block at 01bf0000
flash_erase: Skipping bad block at 01bf4000
flash_erase: Skipping bad block at 01bf8000
flash_erase: Skipping bad block at 01bfc000
Erasing 16 Kibyte @ 1bfc000 -- 100 % complete

3. root@mpc8315e-rdb:~# flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3

4. Then boot with a jffs2 rootfs

5. root@mpc8315e-rdb:~# cat /proc/cmdline root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200 root@mpc8315e-rdb:~#

root@mpc8315e-rdb:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=59136k,nr_inodes=14784,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)

The following changes since commit 8e0c54cd0e82ffe120f84f495101cd29e6fd06bf:

   bitbake: bb/utils: fix contains_any() (2014-06-12 17:47:59 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib hao/master

for you to fetch changes up to 7984d3ab156e0a1a50837ec737dfb13defa27a5c:

   mpc8315e-rdb: add the jffs2 image support (2014-06-13 12:24:10 +0800)

----------------------------------------------------------------
Kevin Hao (2):
mpc8315e-rdb: bump to linux-yocto 3.14
mpc8315e-rdb: add the jffs2 image support

  meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf                 | 5 ++++-
  meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.14.bbappend | 3 +++
  2 files changed, 7 insertions(+), 1 deletion(-)

Thanks,
Kevin

#7 lore raw
Quoted 10 lines · Bruce Ashfield
Quoted 4 lines · Kevin Hao

Hi,

This tries to enable the jffs2 support for the mpc8315e-rdb board. I have tested the jffs2 with the following steps and it worked perfectly.

The other point to add on this review/patch series, is that for it to fully work out of the box, it needs a merge of some kernel patches that Kevin sent to linux-yocto a couple of days ago.

Quoted 7 lines

To make sure that things are coordinated, I can queue this series and send it along with my kernel SRCREV updates to include those patches.

Obviously, I won't queue it until Kevin udpates README.hardware and sends a quick v2 of the changes.

Does that sound acceptable to everyone ?

Sounds good to me.

Cheers,

Richard