Skip to contentSkip to conversation

PM / OPP: ARCH_HAS_OPP

PATCH In review Paul Bolle 5 participants 13 messages Jul 28, 2014 – Sep 24, 2014

Subsystems (6)
lore
Share & tools
lore

Paul Bolle

author
#0 lore raw

Mark,

Your commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") landed in today's linux-next (ie, next-20140728). It removes the Kconfig symbol ARCH_HAS_OPP and ten select statements for that symbol.

After that commit there are still nine select statements for that symbol left in linux-next. (These select statements are now actually NOPs.) The peculiar thing is that these nine statements are all found in Kconfig files also touched by that commit.

Anyhow, are patches to remove these pointless select statements queued somewhere?

Paul Bolle

#1 lore raw
Quoted 6 lines · Paul Bolle

Mark,

Your commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") landed in today's linux-next (ie, next-20140728). It removes the Kconfig symbol ARCH_HAS_OPP and ten select statements for that symbol.

Quoted 7 lines

After that commit there are still nine select statements for that symbol left in linux-next. (These select statements are now actually NOPs.) The peculiar thing is that these nine statements are all found in Kconfig files also touched by that commit.

Anyhow, are patches to remove these pointless select statements queued somewhere?

There a couple of such select in imx Kconfig, and I will clean them up.

Shawn

author
#2 lore raw

PATCH 1/1 PM / OPP: Remove ARCH_HAS_OPP completely

In reply to Paul Bolle

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are useless. Remove them too.

---
Done on top of next-20140912. Tested with git grep only!

 arch/arm/mach-omap2/Kconfig    | 5 -----
 arch/arm/mach-shmobile/Kconfig | 1 -
 drivers/devfreq/Kconfig        | 1 -
 3 files changed, 7 deletions(-)
arch/arm/mach-omap2/Kconfig +0 -5
index 5b103099626d..f138bd33a463 100644
@@ -22,7 +22,6 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_720789
@@ -41,7 +40,6 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
@@ -53,14 +51,12 @@ config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 
 config SOC_AM43XX
 	bool "TI AM43x"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
@@ -69,7 +65,6 @@ config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
arch/arm/mach-shmobile/Kconfig +0 -1
index 21f457b56c01..f59019dd986e 100644
@@ -36,7 +36,6 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_OPP
 
 if ARCH_SHMOBILE_MULTI
 
drivers/devfreq/Kconfig +0 -1
index 3dced0a9eae3..2227e9bf3884 100644
@@ -80,7 +80,6 @@ config ARM_EXYNOS4_BUS_DEVFREQ
 config ARM_EXYNOS5_BUS_DEVFREQ
 	bool "ARM Exynos5250 Bus DEVFREQ Driver"
 	depends on SOC_EXYNOS5250
-	select ARCH_HAS_OPP
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select PM_OPP
 	help
Signature · 1 line
1.9.3
#3 lore raw

Re: [PATCH] PM / OPP: Remove ARCH_HAS_OPP completely

Quoted 9 lines · Paul Bolle

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are useless. Remove them too.

Quoted 5 lines

---
Done on top of next-20140912. Tested with git grep only!

 arch/arm/mach-omap2/Kconfig    | 5 -----

there can be conflict here:
https://patchwork.kernel.org/patch/4857231/

http://marc.info/?l=linux-omap&m=141047815520894&w=2

Quoted 79 lines
 arch/arm/mach-shmobile/Kconfig | 1 -
 drivers/devfreq/Kconfig        | 1 -
 3 files changed, 7 deletions(-)
arch/arm/mach-omap2/Kconfig +0 -5
index 5b103099626d..f138bd33a463 100644
@@ -22,7 +22,6 @@ config ARCH_OMAP4
        bool "TI OMAP4"
        depends on ARCH_MULTI_V7
        select ARCH_OMAP2PLUS
-       select ARCH_HAS_OPP
        select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
        select ARM_CPU_SUSPEND if PM
        select ARM_ERRATA_720789
@@ -41,7 +40,6 @@ config SOC_OMAP5
        bool "TI OMAP5"
        depends on ARCH_MULTI_V7
        select ARCH_OMAP2PLUS
-       select ARCH_HAS_OPP
        select ARM_CPU_SUSPEND if PM
        select ARM_GIC
        select HAVE_ARM_SCU if SMP
@@ -53,14 +51,12 @@ config SOC_AM33XX
        bool "TI AM33XX"
        depends on ARCH_MULTI_V7
        select ARCH_OMAP2PLUS
-       select ARCH_HAS_OPP
        select ARM_CPU_SUSPEND if PM
 
 config SOC_AM43XX
        bool "TI AM43x"
        depends on ARCH_MULTI_V7
        select ARCH_OMAP2PLUS
-       select ARCH_HAS_OPP
        select ARM_GIC
        select MACH_OMAP_GENERIC
        select MIGHT_HAVE_CACHE_L2X0
@@ -69,7 +65,6 @@ config SOC_DRA7XX
        bool "TI DRA7XX"
        depends on ARCH_MULTI_V7
        select ARCH_OMAP2PLUS
-       select ARCH_HAS_OPP
        select ARM_CPU_SUSPEND if PM
        select ARM_GIC
        select HAVE_ARM_ARCH_TIMER
arch/arm/mach-shmobile/Kconfig +0 -1
index 21f457b56c01..f59019dd986e 100644
@@ -36,7 +36,6 @@ menuconfig ARCH_SHMOBILE_MULTI
        select NO_IOPORT_MAP
        select PINCTRL
        select ARCH_REQUIRE_GPIOLIB
-       select ARCH_HAS_OPP
 
 if ARCH_SHMOBILE_MULTI
 
drivers/devfreq/Kconfig +0 -2
index 3dced0a9eae3..2227e9bf3884 100644
@@ -80,7 +80,6 @@ config ARM_EXYNOS4_BUS_DEVFREQ
 config ARM_EXYNOS5_BUS_DEVFREQ
        bool "ARM Exynos5250 Bus DEVFREQ Driver"
        depends on SOC_EXYNOS5250
-       select ARCH_HAS_OPP
        select DEVFREQ_GOV_SIMPLE_ONDEMAND
        select PM_OPP
        help
--

1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 3 lines
---
Regards,
Nishanth Menon
author
#4 lore raw

Re: [PATCH] PM / OPP: Remove ARCH_HAS_OPP completely

Quoted 14 lines · Nishanth Menon
Quoted 13 lines · Paul Bolle

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are useless. Remove them too.

---
Done on top of next-20140912. Tested with git grep only!

Quoted 6 lines
Quoted 1 line
 arch/arm/mach-omap2/Kconfig    | 5 -----

there can be conflict here:
https://patchwork.kernel.org/patch/4857231/

http://marc.info/?l=linux-omap&m=141047815520894&w=2

Thanks.

Quoted 2 lines
Quoted 2 lines
 arch/arm/mach-shmobile/Kconfig | 1 -
 drivers/devfreq/Kconfig        | 1 -

Were patches submitted for these two files too? If so, we can probably just drop my patch.

Paul Bolle

#5 lore raw

Re: [PATCH] PM / OPP: Remove ARCH_HAS_OPP completely

Hi Paul, Rafael,

Quoted 5 lines · Paul Bolle
Quoted 2 lines
Quoted 2 lines
 arch/arm/mach-shmobile/Kconfig | 1 -
 drivers/devfreq/Kconfig        | 1 -

Were patches submitted for these two files too? If so, we can probably just drop my patch.

Rafael said: "I've queued this up for 3.17, thanks!"

http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/274681.html

But it's not in -next.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

author
#6 lore raw

Re: [PATCH] PM / OPP: Remove ARCH_HAS_OPP completely

Quoted 6 lines · Geert Uytterhoeven

Hi Paul, Rafael,

Quoted 3 lines · Paul Bolle
Quoted 2 lines
Quoted 2 lines
 arch/arm/mach-shmobile/Kconfig | 1 -
 drivers/devfreq/Kconfig        | 1 -
Quoted 8 lines
Quoted 2 lines

Were patches submitted for these two files too? If so, we can probably just drop my patch.

Rafael said: "I've queued this up for 3.17, thanks!"

http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/274681.html

But it's not in -next.

I think that patch landed as commit 78c5e0bb145d. But for some unknown reason it didn't remove all selects statements for ARCH_HAS_OPP.

The odd thing here is that the last select statements I remove in this patch are all to be found in Kconfig files that actually were touched in that commit. Perhaps these select statements were merged back in during conflict resolution. I have no idea.

Paul Bolle

#7 lore raw

Re: [PATCH] PM / OPP: Remove ARCH_HAS_OPP completely

In reply to Paul Bolle
Quoted 5 lines · Paul Bolle

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

Quoted 7 lines

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are useless. Remove them too.

---
Done on top of next-20140912. Tested with git grep only!

Hi Paul,

could you break the shmobile portion out into a separate patch for me to take through my renesas tree?

I am concerned that taking those changes via a different route will result in conflicts as arch/arm/mach-shmobile/Kconfig is often updated.

Quoted 76 lines
 arch/arm/mach-omap2/Kconfig    | 5 -----
 arch/arm/mach-shmobile/Kconfig | 1 -
 drivers/devfreq/Kconfig        | 1 -
 3 files changed, 7 deletions(-)
arch/arm/mach-omap2/Kconfig +0 -5
index 5b103099626d..f138bd33a463 100644
@@ -22,7 +22,6 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_720789
@@ -41,7 +40,6 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
@@ -53,14 +51,12 @@ config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 
 config SOC_AM43XX
 	bool "TI AM43x"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
@@ -69,7 +65,6 @@ config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
arch/arm/mach-shmobile/Kconfig +0 -1
index 21f457b56c01..f59019dd986e 100644
@@ -36,7 +36,6 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_OPP
 
 if ARCH_SHMOBILE_MULTI
 
drivers/devfreq/Kconfig +0 -1
index 3dced0a9eae3..2227e9bf3884 100644
@@ -80,7 +80,6 @@ config ARM_EXYNOS4_BUS_DEVFREQ
 config ARM_EXYNOS5_BUS_DEVFREQ
 	bool "ARM Exynos5250 Bus DEVFREQ Driver"
 	depends on SOC_EXYNOS5250
-	select ARCH_HAS_OPP
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select PM_OPP
 	help
Signature · 1 line
1.9.3
#8 lore raw

Re: [PATCH] PM / OPP: Remove ARCH_HAS_OPP completely

Quoted 14 lines · Simon Horman
Quoted 5 lines · Paul Bolle

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

Quoted 7 lines

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are useless. Remove them too.

---
Done on top of next-20140912. Tested with git grep only!

Quoted 8 lines

Hi Paul,

could you break the shmobile portion out into a separate patch for me to take through my renesas tree?

I am concerned that taking those changes via a different route will result in conflicts as arch/arm/mach-shmobile/Kconfig is often updated.

Of course the above comment is redundant if Rafael has already taken this patch.

Quoted 82 lines
Quoted 77 lines
 arch/arm/mach-omap2/Kconfig    | 5 -----
 arch/arm/mach-shmobile/Kconfig | 1 -
 drivers/devfreq/Kconfig        | 1 -
 3 files changed, 7 deletions(-)
arch/arm/mach-omap2/Kconfig +0 -5
index 5b103099626d..f138bd33a463 100644
@@ -22,7 +22,6 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_720789
@@ -41,7 +40,6 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
@@ -53,14 +51,12 @@ config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 
 config SOC_AM43XX
 	bool "TI AM43x"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
@@ -69,7 +65,6 @@ config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
arch/arm/mach-shmobile/Kconfig +0 -1
index 21f457b56c01..f59019dd986e 100644
@@ -36,7 +36,6 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_OPP
 
 if ARCH_SHMOBILE_MULTI
 
drivers/devfreq/Kconfig +0 -1
index 3dced0a9eae3..2227e9bf3884 100644
@@ -80,7 +80,6 @@ config ARM_EXYNOS4_BUS_DEVFREQ
 config ARM_EXYNOS5_BUS_DEVFREQ
 	bool "ARM Exynos5250 Bus DEVFREQ Driver"
 	depends on SOC_EXYNOS5250
-	select ARCH_HAS_OPP
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select PM_OPP
 	help
Signature · 1 line
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#9 lore raw

PATCH 1/1 ARM: shmobile: Remove ARCH_HAS_OPP completely

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are now useless. Remove one from shmobile too.

---
Sent previously as part of the treewide patch "PM / OPP: Remove ARCH_HAS_OPP completely". But it turns out the changes for omap2 are already queued in omap-for-v3.18/soc (but not in linux-next!). Besides, Simon Horman wanted the shmobile change split off.

Done on top of next-20140922. Tested by grepping the tree.

 arch/arm/mach-shmobile/Kconfig | 1 -
 1 file changed, 1 deletion(-)
arch/arm/mach-shmobile/Kconfig +0 -1
index 21f457b56c01..f59019dd986e 100644
@@ -36,7 +36,6 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_OPP
 
 if ARCH_SHMOBILE_MULTI
 
Signature · 1 line
1.9.3
Acked-by on v1 1/1
#10 lore raw

Re: [PATCH] ARM: shmobile: Remove ARCH_HAS_OPP completely

Quoted 8 lines · Paul Bolle

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are now useless. Remove one from shmobile too.

The explanation for "some reason" is very simple: new selects were introduced in parallel with the removal of the existing ones.

Quoted 1 line

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#11 lore raw

Re: [PATCH] ARM: shmobile: Remove ARCH_HAS_OPP completely

Quoted 10 lines · Geert Uytterhoeven
Quoted 8 lines · Paul Bolle

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are now useless. Remove one from shmobile too.

Quoted 6 lines

The explanation for "some reason" is very simple: new selects were introduced in parallel with the removal of the existing ones.

Quoted 1 line

Thanks, I have queued this up for v3.19.
I will push it to a branch that will be included in linux-next once v3.18-rc1 has been released.

author
#12 lore raw

PATCH 1/1 PM / devfreq: Remove ARCH_HAS_OPP completely

In reply to Simon Horman

The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore.

So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are now useless. Remove one from devfreq too.

---
Sent previously as part of the treewide patch "PM / OPP: Remove ARCH_HAS_OPP completely". But it turns out the changes for omap2 are already queued in omap-for-v3.18/soc (but not in linux-next!). Besides, Simon Horman wanted the shmobile change split off. As a result this change needs to be sent separately.

Done on top of next-20140922. Tested by grepping the tree.

 drivers/devfreq/Kconfig | 1 -
 1 file changed, 1 deletion(-)
drivers/devfreq/Kconfig +0 -1
index 3dced0a9eae3..2227e9bf3884 100644
@@ -80,7 +80,6 @@ config ARM_EXYNOS4_BUS_DEVFREQ
 config ARM_EXYNOS5_BUS_DEVFREQ
 	bool "ARM Exynos5250 Bus DEVFREQ Driver"
 	depends on SOC_EXYNOS5250
-	select ARCH_HAS_OPP
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select PM_OPP
 	help
Signature · 1 line
1.9.3