Skip to contentSkip to conversation

Build Tizen with yocto work-flow

DISCUSSION ronan 7 participants 21 messages Jul 31, 2014 – Aug 4, 2014

lore
Share & tools
lore

ronan

author
#0 lore raw

Hi all,
presently we are working on a project "Tizen on Yocto" that provides an alternative to gbs tools or OBS.
- https://wiki.tizen.org/wiki/Tizen_on_yocto

We are glad to announce the first release 0.1 of our project.

The main features as the same found in Tizen common:
- Smack security
- Pure wayland environment, with tz-launcher
- Crosswalk
- Multi-user support
- ...

We would like to share this project with Tizen and Yocto communities.

If you are interested to build Tizen with yocto, just follow this link:
- https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto

If you have any question or issue feel free to contact us, on the Tizen mailing list ([email protected]) .

Here a link to the yocto project:
- https://www.yoctoproject.org/

Regards,
Ronan

#1 lore raw

Congratulations, Ronan!

Cheers,
Bob

Quoted 33 lines · ronan

Hi all,
presently we are working on a project "Tizen on Yocto" that provides an alternative to gbs tools or OBS.
- https://wiki.tizen.org/wiki/Tizen_on_yocto

We are glad to announce the first release 0.1 of our project.

The main features as the same found in Tizen common:
- Smack security
- Pure wayland environment, with tz-launcher
- Crosswalk
- Multi-user support
- ...

We would like to share this project with Tizen and Yocto communities.

If you are interested to build Tizen with yocto, just follow this link:
- https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto

If you have any question or issue feel free to contact us, on the Tizen mailing list ([email protected]) .

Here a link to the yocto project:
- https://www.yoctoproject.org/

Regards,
Ronan
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general

Signature · 1 line
[email protected]
#2 lore raw
In reply to ronan
Quoted 16 lines · ronan

Hi all,
presently we are working on a project "Tizen on Yocto" that provides an alternative to gbs tools or OBS.
- https://wiki.tizen.org/wiki/Tizen_on_yocto

We are glad to announce the first release 0.1 of our project.

The main features as the same found in Tizen common:
- Smack security
- Pure wayland environment, with tz-launcher
- Crosswalk
- Multi-user support
- ...

We would like to share this project with Tizen and Yocto communities.

Quoted 10 lines

If you are interested to build Tizen with yocto, just follow this link:
- https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto

If you have any question or issue feel free to contact us, on the Tizen mailing list ([email protected]) .

Here a link to the yocto project:
- https://www.yoctoproject.org/

Hi Ronan,

I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?

Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?

Regards,

Alex

author
#3 lore raw

Hi Alex

Quoted 5 lines

I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?

Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?

No, we did not test it for ARM yet, but it's in the pipe.

If try a ARM build, we would be interested in your feed back.

Regarding Mono, it shouldn't be an issue.

Regards,
Ronan

#4 lore raw
Quoted 6 lines · ronan

Hi Alex

Quoted 4 lines

I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?

Quoted 7 lines
Quoted 1 line

Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?

No, we did not test it for ARM yet, but it's in the pipe.

If try a ARM build, we would be interested in your feed back.

Regarding Mono, it shouldn't be an issue.

Thanks. I'll see if I can take a look here on an RPi or an i.MX6 then and let you know how it goes.

Cheers,

Alex

#5 lore raw

Hello,

We have done some preliminary testing with Mono for ARM. Works fine for our application (no graphics).

Regards,

Ruud

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Alex J Lennon
Sent: Friday, August 01, 2014 12:07 PM
To: ronan
Cc: [email protected]; [email protected]
Subject: Re: [yocto] Build Tizen with yocto work-flow

Quoted 7 lines · ronan

Hi Alex

Quoted 5 lines

I'm interested in trying this out. Presumably it should be trivial to

add Mono support by pulling in meta-mono?

Quoted 7 lines
Quoted 1 line

Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?

No, we did not test it for ARM yet, but it's in the pipe.

If try a ARM build, we would be interested in your feed back.

Regarding Mono, it shouldn't be an issue.

Thanks. I'll see if I can take a look here on an RPi or an i.MX6 then and let you know how it goes.

Cheers,

Alex

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#6 lore raw
In reply to Alex J Lennon
Quoted 15 lines · Alex J Lennon
Quoted 11 lines · ronan

Hi Alex

Quoted 4 lines

I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?

Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?

No, we did not test it for ARM yet, but it's in the pipe.

If try a ARM build, we would be interested in your feed back.

Regarding Mono, it shouldn't be an issue.

Thanks. I'll see if I can take a look here on an RPi or an i.MX6 then and let you know how it goes.

Quoted 9 lines

Cheers,

Alex

_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general

Getting some errors here having followed the "Using Scripts" section.

I am guessing it might be as I'm using Ubuntu 14.04 LTS x64

This is for MACHINE=genericx86

e.g.

| make[3]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb, do_install) failed with exit code '1'

Layers
=====

Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140801"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""

meta
meta-yocto
meta-yocto-bsp = "tizen:faa50171a19a59600f6ac4ec124689bdc0cc1c48"
meta-systemd
meta-ruby
meta-multimedia
meta-oe = "master:321c808a57e657c857dfe412d3c09839ebac27f1"
meta-tizen = "master:0f5ac68414f7c5702cec0fbc2d54cd01c104b4df"

Cheers,

Alex

#7 lore raw

Hi Alex,

Can you check if the filesfind-supplements and find-supplements.ksyms exist by trying this please:

bitbake rpm-native -c devshell
ls -l scripts/find-supplements{,.ksyms}

And tell us the output.

Thanks,
Kevin

Quoted 53 lines · Alex J Lennon

Getting some errors here having followed the "Using Scripts" section.

I am guessing it might be as I'm using Ubuntu 14.04 LTS x64

This is for MACHINE=genericx86

e.g.

| make[3]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb, do_install) failed with exit code '1'

Layers
=====

Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140801"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""

meta
meta-yocto
meta-yocto-bsp = "tizen:faa50171a19a59600f6ac4ec124689bdc0cc1c48"
meta-systemd
meta-ruby
meta-multimedia
meta-oe = "master:321c808a57e657c857dfe412d3c09839ebac27f1"
meta-tizen = "master:0f5ac68414f7c5702cec0fbc2d54cd01c104b4df"

Cheers,

Alex

_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general

#8 lore raw

Hi Kévin,

Quoted 1 line · Kévin THIERRY

ls -l scripts/find-supplements{,.ksyms}

~/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git$ ls -l scripts/find-supplements{,.ksyms}
-rw-r--r-- 1 ajlennon ajlennon 418 Aug 1 11:41 scripts/find-supplements -rw-r--r-- 1 ajlennon ajlennon 2764 Aug 1 11:41 scripts/find-supplements.ksyms

Cheers,

Alex

#9 lore raw
In reply to Kévin THIERRY
Quoted 9 lines · Kévin THIERRY

Hi Alex,

Can you check if the filesfind-supplements and find-supplements.ksyms exist by trying this please:

bitbake rpm-native -c devshell
ls -l scripts/find-supplements{,.ksyms}

And tell us the output.

I think it's the bash vs dash issue rearing its head again

Replacing

install -m 755 scripts/find-supplements{,.ksyms} ${D}${prefix}/lib/rpm

with

install -m 755 scripts/find-supplements ${D}${prefix}/lib/rpm
install -m 755 scripts/find-supplements.ksyms ${D}${prefix}/lib/rpm

in rpm-extraconf.inc got me further, onto an error about a missing "pushd"

This made me think it was a shall issue and sure enough reconfiguring back to bash with

dpkg-reconfigure dash

fixed the problem.

I'm not sure of the Yocto policy on dash vs bash but I've been using dash without problems in general for some time now

Cheers,

Alex

#10 lore raw
Quoted 11 lines · Alex J Lennon
Quoted 9 lines · Kévin THIERRY

Hi Alex,

Can you check if the filesfind-supplements and find-supplements.ksyms exist by trying this please:

bitbake rpm-native -c devshell
ls -l scripts/find-supplements{,.ksyms}

And tell us the output.

I think it's the bash vs dash issue rearing its head again

That's what I was thinking.

Quoted 15 lines

Replacing

  install -m 755 scripts/find-supplements{,.ksyms} ${D}${prefix}/lib/rpm

with

  install -m 755 scripts/find-supplements ${D}${prefix}/lib/rpm
   install -m 755 scripts/find-supplements.ksyms ${D}${prefix}/lib/rpm

in rpm-extraconf.inc got me further, onto an error about a missing "pushd"

This made me think it was a shall issue and sure enough reconfiguring back to bash with

Quoted 6 lines

dpkg-reconfigure dash

fixed the problem.

I'm not sure of the Yocto policy on dash vs bash but I've been using dash without problems in general for some time now

I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)

Regards,
Kevin

#11 lore raw
Quoted 4 lines

I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)

No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.

Hopefully that'll be some useful feedback in terms of a build on Ubuntu

Cheers,

Alex

#12 lore raw
Quoted 7 lines · Alex J Lennon
Quoted 3 lines

I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)

No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.

Quoted 7 lines

Hopefully that'll be some useful feedback in terms of a build on Ubuntu

Cheers,

Alex

Kévin,

(1) Install failure for systemd_git.bb

| /home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/temp/run.do_install.16014:
line 131: /usr/bin/mkdir: No such file or directory
| WARNING:
/home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/temp/run.do_install.16014:1 exit 1 from
| /usr/bin/mkdir -p
/home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/image//usr/sbin | ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/temp/log.do_install.16014)
ERROR: Task 1692 (/home/ajlennon/yocto/meta-tizen/recipes-tizen/systemd/systemd_git.bb,
do_install) failed with exit code '1'

I think this is because of use of ${prefix}/bin/ for commands in systemd.inc do_install()

Not sure what the answer is here but if I s|${prefix}/bin/||g in do_install() then it installs successfully

(2) Install failure for llvm3.3_3.3.bb

I had a couple of funnies with llvm but that could well have been related to dash/bash as cleaning and rebuilding the recipe fixed it

...

That gets me a rootfs successfully built. Now to work out how to run it under VirtualBox or how to get MACHINE=qemux86 built up...

Cheers,

Alex

#13 lore raw
Quoted 8 lines · Alex J Lennon
Quoted 7 lines · Alex J Lennon
Quoted 3 lines

I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)

No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.

Quoted 6 lines
Quoted 6 lines

Hopefully that'll be some useful feedback in terms of a build on Ubuntu

Cheers,

Alex

Kévin,

I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.

Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.

They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.

e.g. https://www.dropbox.com/sc/ckc84doykfnyvwp/AAAA7s_wocGh1PNUJ3tfIMBLa?n=17361870

Cheers,

Alex

#14 lore raw
Quoted 3 lines · Alex J Lennon

I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.

Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.

its a 'sony' laptop per picture :)

Quoted 2 lines

They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.

do you have /etc/machine-id file in rootfs ?

#15 lore raw
Quoted 6 lines · Khem Raj
Quoted 3 lines · Alex J Lennon

I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.

Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.

its a 'sony' laptop per picture :)

Hah. Well spotted! I am glad to see somebody is paying attention Khem ! :-D

Quoted 6 lines
Quoted 2 lines

They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.

do you have /etc/machine-id file in rootfs ?

No there's no /etc/machine-id on the USB stick...

(NB. I did try generating a video to show the behaviour but VirtualBox video capture isn't playing ball. It doesn't stop completely at the machine-id error message. It seems to continue further and I get more messages. Just very very slowly)

Regards,

Alex

#16 lore raw
In reply to Alex J Lennon
Quoted 11 lines · Alex J Lennon
Quoted 10 lines · Alex J Lennon
Quoted 9 lines · Alex J Lennon
Quoted 3 lines

I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)

No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.

Hopefully that'll be some useful feedback in terms of a build on Ubuntu

Quoted 7 lines
Quoted 4 lines
Quoted 4 lines

Cheers,

Alex

Kévin,

I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.

That's good news ! Did you have to make some changes in meta-tizen ? If so, could you send us your patches so we can integrate them ? Thanks !

Quoted 8 lines

Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.

They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.

e.g. https://www.dropbox.com/sc/ckc84doykfnyvwp/AAAA7s_wocGh1PNUJ3tfIMBLa?n=17361870

We already encountered this issue in the past unfortunately we don't know what causes that. We didn't get this issue recently so we are unable to reproduce it. I'm wondering if it could be linked too the use of a USB (we are not using USB anymore to test the images since it's not very convenient). I will put an image on a USB stick and see how it goes.

If you have more ideas about what could cause this issue we would be glad to know them.

Kevin

#17 lore raw
Quoted 44 lines · Kévin THIERRY
Quoted 13 lines · Alex J Lennon
Quoted 12 lines · Alex J Lennon
Quoted 11 lines · Alex J Lennon
Quoted 3 lines

I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)

No problem Kévin. I'm glad you feel it is of some use. I'm getting other
recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.

Hopefully that'll be some useful feedback in terms of a build on Ubuntu

Quoted 8 lines
Quoted 4 lines
Quoted 4 lines

Cheers,

Alex

Kévin,

I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.

That's good news ! Did you have to make some changes in meta-tizen ? If so, could you send us your patches so we can integrate them ? Thanks !

Quoted 4 lines

Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.

Quoted 8 lines

They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.

e.g.
https://www.dropbox.com/sc/ckc84doykfnyvwp/AAAA7s_wocGh1PNUJ3tfIMBLa?n=17361870

We already encountered this issue in the past unfortunately we don't know what causes that. We didn't get this issue recently so we are unable to reproduce it. I'm wondering if it could be linked too the use of a USB (we are not using USB anymore to test the images since it's not very convenient). I will put an image on a USB stick and see how it goes.

Quoted 4 lines

If you have more ideas about what could cause this issue we would be glad to know them.

Kevin

I don't think it's specifically due to USB as I was using USB for the laptop test, but I built up a VDI disk image in a VirtualBox for the VM test, so no USB there...

I'm not sure why it might be I'm afraid Kevin. I started trying to follow the manual procedure to build but ran into some build errors there and ran out of time.

Cheers,

Alex

#18 lore raw
In reply to Alex J Lennon
Quoted 8 lines · Alex J Lennon

Getting some errors here having followed the "Using Scripts" section.

I am guessing it might be as I'm using Ubuntu 14.04 LTS x64

This is for MACHINE=genericx86

e.g.

Quoted 14 lines

| make[3]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb, do_install) failed with exit code '1'

Its because there are bashisms in that metadata and you have dash as /bin/sh.

I've already mentioned this at least once but have been ignored :(

Cheers,

Richard

#19 lore raw
Quoted 23 lines · Richard Purdie
Quoted 8 lines · Alex J Lennon

Getting some errors here having followed the "Using Scripts" section.

I am guessing it might be as I'm using Ubuntu 14.04 LTS x64

This is for MACHINE=genericx86

e.g.

Quoted 14 lines

| make[3]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb, do_install) failed with exit code '1'

Quoted 5 lines

Its because there are bashisms in that metadata and you have dash as /bin/sh.

I've already mentioned this at least once but have been ignored :(

Yes, thanks Richard, I'd cracked onto that. I wonder if it would be useful/possible to add a class of warning to bitbake "Bashism detected" or some such?

Next problem is that grub on my x64 system doesn't seem to like being used to install x86 files ... :)

Cheers,

Alex

#20 lore raw
Quoted 24 lines · Alex J Lennon
Quoted 23 lines · Richard Purdie
Quoted 22 lines · Alex J Lennon

Getting some errors here having followed the "Using Scripts" section.

I am guessing it might be as I'm using Ubuntu 14.04 LTS x64

This is for MACHINE=genericx86

e.g.

| make[3]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb, do_install) failed with exit code '1'

Quoted 5 lines
Quoted 5 lines

Its because there are bashisms in that metadata and you have dash as /bin/sh.

I've already mentioned this at least once but have been ignored :(

I reported the issue in our bug tracker (https://bugs.tizen.org/jira/browse/BTY-21) and made a correction for the issue in the rpm recipe. I will launch a full build using dash in order to catch the remaining "bashism" but if you find some more, please report them to me.

Quoted 8 lines

Yes, thanks Richard, I'd cracked onto that. I wonder if it would be useful/possible to add a class of warning to bitbake "Bashism detected" or some such?

Next problem is that grub on my x64 system doesn't seem to like being used to install x86 files ... :)

Kevin