Build Tizen with yocto work-flow
Hi all,
presently we are working on a project "Tizen on Yocto" that provides an alternative to gbs tools or OBS.
- https://wiki.tizen.org/wiki/Tizen_on_yocto
We are glad to announce the first release 0.1 of our project.
The main features as the same found in Tizen common:
- Smack security
- Pure wayland environment, with tz-launcher
- Crosswalk
- Multi-user support
- ...
We would like to share this project with Tizen and Yocto communities.
If you are interested to build Tizen with yocto, just follow this link:
- https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto
If you have any question or issue feel free to contact us, on the Tizen mailing list ([email protected]) .
Here a link to the yocto project:
- https://www.yoctoproject.org/
Regards,
Ronan
Congratulations, Ronan!
Cheers,
Bob
Quoted 33 lines · ronan
Hi all,
presently we are working on a project "Tizen on Yocto" that provides an alternative to gbs tools or OBS.
- https://wiki.tizen.org/wiki/Tizen_on_yoctoWe are glad to announce the first release 0.1 of our project.
The main features as the same found in Tizen common:
- Smack security
- Pure wayland environment, with tz-launcher
- Crosswalk
- Multi-user support
- ...We would like to share this project with Tizen and Yocto communities.
If you are interested to build Tizen with yocto, just follow this link:
- https://wiki.tizen.org/wiki/Build_Tizen_with_YoctoIf you have any question or issue feel free to contact us, on the Tizen mailing list ([email protected]) .
Here a link to the yocto project:
- https://www.yoctoproject.org/Regards,
Ronan
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
Signature · 1 line
[email protected]
Quoted 16 lines · ronan
Hi all,
presently we are working on a project "Tizen on Yocto" that provides an alternative to gbs tools or OBS.
- https://wiki.tizen.org/wiki/Tizen_on_yoctoWe are glad to announce the first release 0.1 of our project.
The main features as the same found in Tizen common:
- Smack security
- Pure wayland environment, with tz-launcher
- Crosswalk
- Multi-user support
- ...We would like to share this project with Tizen and Yocto communities.
Quoted 10 lines
If you are interested to build Tizen with yocto, just follow this link:
- https://wiki.tizen.org/wiki/Build_Tizen_with_YoctoIf you have any question or issue feel free to contact us, on the Tizen mailing list ([email protected]) .
Here a link to the yocto project:
- https://www.yoctoproject.org/
Hi Ronan,
I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?
Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?
Regards,
Alex
Hi Alex
Quoted 5 lines
I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?
Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?
No, we did not test it for ARM yet, but it's in the pipe.
If try a ARM build, we would be interested in your feed back.
Regarding Mono, it shouldn't be an issue.
Regards,
Ronan
Quoted 6 lines · ronan
Hi Alex
Quoted 4 lines
I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?
Quoted 7 lines
Quoted 1 line
Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?
No, we did not test it for ARM yet, but it's in the pipe.
If try a ARM build, we would be interested in your feed back.
Regarding Mono, it shouldn't be an issue.
Thanks. I'll see if I can take a look here on an RPi or an i.MX6 then and let you know how it goes.
Cheers,
Alex
Hello,
We have done some preliminary testing with Mono for ARM. Works fine for our application (no graphics).
Regards,
Ruud
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Alex J Lennon
Sent: Friday, August 01, 2014 12:07 PM
To: ronan
Cc: [email protected]; [email protected]
Subject: Re: [yocto] Build Tizen with yocto work-flow
Quoted 7 lines · ronan
Hi Alex
Quoted 5 lines
I'm interested in trying this out. Presumably it should be trivial to
add Mono support by pulling in meta-mono?
Quoted 7 lines
Quoted 1 line
Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?
No, we did not test it for ARM yet, but it's in the pipe.
If try a ARM build, we would be interested in your feed back.
Regarding Mono, it shouldn't be an issue.
Thanks. I'll see if I can take a look here on an RPi or an i.MX6 then and let you know how it goes.
Cheers,
Alex
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 15 lines · Alex J Lennon
Quoted 11 lines · ronan
Hi Alex
Quoted 4 lines
I'm interested in trying this out. Presumably it should be trivial to add Mono support by pulling in meta-mono?
Have you looked at this on ARM target platforms at all? e.g. i.MX6 ?
No, we did not test it for ARM yet, but it's in the pipe.
If try a ARM build, we would be interested in your feed back.
Regarding Mono, it shouldn't be an issue.
Thanks. I'll see if I can take a look here on an RPi or an i.MX6 then and let you know how it goes.
Quoted 9 lines
Cheers,
Alex
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
Getting some errors here having followed the "Using Scripts" section.
I am guessing it might be as I'm using Ubuntu 14.04 LTS x64
This is for MACHINE=genericx86
e.g.
| make[3]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb, do_install) failed with exit code '1'
Layers
=====
Build Configuration:
BB_VERSION = "1.23.1" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-14.04" TARGET_SYS = "i586-poky-linux" MACHINE = "genericx86" DISTRO = "poky" DISTRO_VERSION = "1.6+snapshot-20140801" TUNE_FEATURES = "m32 core2" TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "tizen:faa50171a19a59600f6ac4ec124689bdc0cc1c48"
meta-systemd
meta-ruby
meta-multimedia
meta-oe = "master:321c808a57e657c857dfe412d3c09839ebac27f1"
meta-tizen = "master:0f5ac68414f7c5702cec0fbc2d54cd01c104b4df"
Cheers,
Alex
Hi Alex,
Can you check if the filesfind-supplements and find-supplements.ksyms exist by trying this please:
bitbake rpm-native -c devshell
ls -l scripts/find-supplements{,.ksyms}
And tell us the output.
Thanks,
Kevin
Quoted 53 lines · Alex J Lennon
Getting some errors here having followed the "Using Scripts" section.
I am guessing it might be as I'm using Ubuntu 14.04 LTS x64
This is for MACHINE=genericx86
e.g.
| make[3]: Leaving directory '
/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed:do_install(log file is located at/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb,do_install) failed with exit code '1'Layers
=====Build Configuration:
BB_VERSION = "1.23.1" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-14.04" TARGET_SYS = "i586-poky-linux" MACHINE = "genericx86" DISTRO = "poky" DISTRO_VERSION = "1.6+snapshot-20140801" TUNE_FEATURES = "m32 core2" TARGET_FPU = ""meta
meta-yocto
meta-yocto-bsp = "tizen:faa50171a19a59600f6ac4ec124689bdc0cc1c48"
meta-systemd
meta-ruby
meta-multimedia
meta-oe = "master:321c808a57e657c857dfe412d3c09839ebac27f1"
meta-tizen = "master:0f5ac68414f7c5702cec0fbc2d54cd01c104b4df"Cheers,
Alex
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
Hi Kévin,
Quoted 1 line · Kévin THIERRY
ls -l
scripts/find-supplements{,.ksyms}
~/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git$ ls -l scripts/find-supplements{,.ksyms}
-rw-r--r-- 1 ajlennon ajlennon 418 Aug 1 11:41 scripts/find-supplements -rw-r--r-- 1 ajlennon ajlennon 2764 Aug 1 11:41 scripts/find-supplements.ksyms
Cheers,
Alex
Quoted 9 lines · Kévin THIERRY
Hi Alex,
Can you check if the filesfind-supplements and find-supplements.ksyms exist by trying this please:
bitbake rpm-native -c devshell
ls -lscripts/find-supplements{,.ksyms}And tell us the output.
I think it's the bash vs dash issue rearing its head again
Replacing
install -m 755 scripts/find-supplements{,.ksyms} ${D}${prefix}/lib/rpm
with
install -m 755 scripts/find-supplements ${D}${prefix}/lib/rpm
install -m 755 scripts/find-supplements.ksyms ${D}${prefix}/lib/rpm
in rpm-extraconf.inc got me further, onto an error about a missing "pushd"
This made me think it was a shall issue and sure enough reconfiguring back to bash with
dpkg-reconfigure dash
fixed the problem.
I'm not sure of the Yocto policy on dash vs bash but I've been using dash without problems in general for some time now
Cheers,
Alex
Quoted 11 lines · Alex J Lennon
Quoted 9 lines · Kévin THIERRY
Hi Alex,
Can you check if the filesfind-supplements and find-supplements.ksyms exist by trying this please:
bitbake rpm-native -c devshell
ls -lscripts/find-supplements{,.ksyms}And tell us the output.
I think it's the bash vs dash issue rearing its head again
That's what I was thinking.
Quoted 15 lines
Replacing
install -m 755 scripts/find-supplements{,.ksyms} ${D}${prefix}/lib/rpmwith
install -m 755 scripts/find-supplements ${D}${prefix}/lib/rpm install -m 755 scripts/find-supplements.ksyms ${D}${prefix}/lib/rpmin rpm-extraconf.inc got me further, onto an error about a missing "pushd"
This made me think it was a shall issue and sure enough reconfiguring back to bash with
Quoted 6 lines
dpkg-reconfigure dash
fixed the problem.
I'm not sure of the Yocto policy on dash vs bash but I've been using dash without problems in general for some time now
I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)
Regards,
Kevin
Quoted 4 lines
I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)
No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.
Hopefully that'll be some useful feedback in terms of a build on Ubuntu
Cheers,
Alex
Quoted 7 lines · Alex J Lennon
Quoted 3 lines
I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)
No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.
Quoted 7 lines
Hopefully that'll be some useful feedback in terms of a build on Ubuntu
Cheers,
Alex
Kévin,
(1) Install failure for systemd_git.bb
| /home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/temp/run.do_install.16014:
line 131: /usr/bin/mkdir: No such file or directory
| WARNING:/home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/temp/run.do_install.16014:1 exit 1 from
| /usr/bin/mkdir -p/home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/image//usr/sbin | ERROR: Function failed: do_install (log file is located at /home/ajlennon/yocto/poky/build/tmp/work/core2-32-poky-linux/systemd/git-r0/temp/log.do_install.16014)
ERROR: Task 1692 (/home/ajlennon/yocto/meta-tizen/recipes-tizen/systemd/systemd_git.bb,do_install) failed with exit code '1'
I think this is because of use of ${prefix}/bin/ for commands in systemd.inc do_install()
Not sure what the answer is here but if I s|${prefix}/bin/||g in do_install() then it installs successfully
(2) Install failure for llvm3.3_3.3.bb
I had a couple of funnies with llvm but that could well have been related to dash/bash as cleaning and rebuilding the recipe fixed it
...
That gets me a rootfs successfully built. Now to work out how to run it under VirtualBox or how to get MACHINE=qemux86 built up...
Cheers,
Alex
Quoted 8 lines · Alex J Lennon
Quoted 7 lines · Alex J Lennon
Quoted 3 lines
I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)
No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.
Quoted 6 lines
Quoted 6 lines
Hopefully that'll be some useful feedback in terms of a build on Ubuntu
Cheers,
Alex
Kévin,
I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.
Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.
They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.
e.g. https://www.dropbox.com/sc/ckc84doykfnyvwp/AAAA7s_wocGh1PNUJ3tfIMBLa?n=17361870
Cheers,
Alex
Quoted 3 lines · Alex J Lennon
I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.
Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.
its a 'sony' laptop per picture :)
Quoted 2 lines
They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.
do you have /etc/machine-id file in rootfs ?
Quoted 6 lines · Khem Raj
Quoted 3 lines · Alex J Lennon
I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.
Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.
its a 'sony' laptop per picture :)
Hah. Well spotted! I am glad to see somebody is paying attention Khem ! :-D
Quoted 6 lines
Quoted 2 lines
They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.
do you have
/etc/machine-idfile in rootfs ?
No there's no /etc/machine-id on the USB stick...
(NB. I did try generating a video to show the behaviour but VirtualBox video capture isn't playing ball. It doesn't stop completely at the machine-id error message. It seems to continue further and I get more messages. Just very very slowly)
Regards,
Alex
Quoted 11 lines · Alex J Lennon
Quoted 10 lines · Alex J Lennon
Quoted 9 lines · Alex J Lennon
Quoted 3 lines
I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)
No problem Kévin. I'm glad you feel it is of some use. I'm getting other recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.
Hopefully that'll be some useful feedback in terms of a build on Ubuntu
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Cheers,
Alex
Kévin,
I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.
That's good news ! Did you have to make some changes in meta-tizen ? If so, could you send us your patches so we can integrate them ? Thanks !
Quoted 8 lines
Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.
They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.
e.g. https://www.dropbox.com/sc/ckc84doykfnyvwp/AAAA7s_wocGh1PNUJ3tfIMBLa?n=17361870
We already encountered this issue in the past unfortunately we don't know what causes that. We didn't get this issue recently so we are unable to reproduce it. I'm wondering if it could be linked too the use of a USB (we are not using USB anymore to test the images since it's not very convenient). I will put an image on a USB stick and see how it goes.
If you have more ideas about what could cause this issue we would be glad to know them.
Kevin
Quoted 44 lines · Kévin THIERRY
Quoted 13 lines · Alex J Lennon
Quoted 12 lines · Alex J Lennon
Quoted 11 lines · Alex J Lennon
Quoted 3 lines
I don't know either but I think it's best to be compliant with both bash and dash, I will try to correct those issues in order to be dash-compliant. Thanks a lot for the feedback ;)
No problem Kévin. I'm glad you feel it is of some use. I'm getting other
recipes failing now with bash. What I'll probably do is let it run to completion with bitbake -k and collate the failures.Hopefully that'll be some useful feedback in terms of a build on Ubuntu
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Cheers,
Alex
Kévin,
I made some progress with a USB installation of Yocto Tizen and a VirtualBox disk.
That's good news ! Did you have to make some changes in meta-tizen ? If so, could you send us your patches so we can integrate them ? Thanks !
Quoted 4 lines
Both a Samsung laptop running from USB and a VirtualBox machine boot, but after mounting the root filesystem they go extremely slowly.
Quoted 8 lines
They get to "failed to get machine ID" and then it's taking a minute or two before new output appears. Then screen goes black and I don't appear to get any further.
e.g.
https://www.dropbox.com/sc/ckc84doykfnyvwp/AAAA7s_wocGh1PNUJ3tfIMBLa?n=17361870We already encountered this issue in the past unfortunately we don't know what causes that. We didn't get this issue recently so we are unable to reproduce it. I'm wondering if it could be linked too the use of a USB (we are not using USB anymore to test the images since it's not very convenient). I will put an image on a USB stick and see how it goes.
Quoted 4 lines
If you have more ideas about what could cause this issue we would be glad to know them.
Kevin
I don't think it's specifically due to USB as I was using USB for the laptop test, but I built up a VDI disk image in a VirtualBox for the VM test, so no USB there...
I'm not sure why it might be I'm afraid Kevin. I started trying to follow the manual procedure to build but ran into some build errors there and ran out of time.
Cheers,
Alex
Quoted 8 lines · Alex J Lennon
Getting some errors here having followed the "Using Scripts" section.
I am guessing it might be as I'm using Ubuntu 14.04 LTS x64
This is for MACHINE=genericx86
e.g.
Quoted 14 lines
| make[3]: Leaving directory '
/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed:do_install(log file is located at/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb,do_install) failed with exit code '1'
Its because there are bashisms in that metadata and you have dash as /bin/sh.
I've already mentioned this at least once but have been ignored :(
Cheers,
Richard
Quoted 23 lines · Richard Purdie
Quoted 8 lines · Alex J Lennon
Getting some errors here having followed the "Using Scripts" section.
I am guessing it might be as I'm using Ubuntu 14.04 LTS x64
This is for MACHINE=genericx86
e.g.
Quoted 14 lines
| make[3]: Leaving directory '
/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed:do_install(log file is located at/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb,do_install) failed with exit code '1'
Quoted 5 lines
Its because there are bashisms in that metadata and you have dash as
/bin/sh.I've already mentioned this at least once but have been ignored :(
Yes, thanks Richard, I'd cracked onto that. I wonder if it would be useful/possible to add a class of warning to bitbake "Bashism detected" or some such?
Next problem is that grub on my x64 system doesn't seem to like being used to install x86 files ... :)
Cheers,
Alex
Quoted 24 lines · Alex J Lennon
Quoted 23 lines · Richard Purdie
Quoted 22 lines · Alex J Lennon
Getting some errors here having followed the "Using Scripts" section.
I am guessing it might be as I'm using Ubuntu 14.04 LTS x64
This is for MACHINE=genericx86
e.g.
| make[3]: Leaving directory '
/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[2]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git/plugins' | make[1]: Leaving directory '/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/git'
| install: cannot stat 'scripts/find-supplements{,.ksyms}': No such file
or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed:do_install(log file is located at/home/ajlennon/yocto/poky/build/tmp/work/x86_64-linux/rpm-native/git-r0/temp/log.do_install.2441)
ERROR: Task 99 (virtual:native:/home/ajlennon/yocto/meta-tizen/recipes-tizen/rpm/rpm_git.bb,do_install) failed with exit code '1'
Quoted 5 lines
Quoted 5 lines
Its because there are bashisms in that metadata and you have dash as
/bin/sh.I've already mentioned this at least once but have been ignored :(
I reported the issue in our bug tracker (https://bugs.tizen.org/jira/browse/BTY-21) and made a correction for the issue in the rpm recipe. I will launch a full build using dash in order to catch the remaining "bashism" but if you find some more, please report them to me.
Quoted 8 lines
Yes, thanks Richard, I'd cracked onto that. I wonder if it would be useful/possible to add a class of warning to bitbake "Bashism detected" or some such?
Next problem is that grub on my x64 system doesn't seem to like being used to install x86 files ... :)
Kevin