apf27dev: add max1027 in the dts
Subsystems (2)
PATCH v2 1/1 apf27dev: add max1027 in the dts
Signed-off-by Philippe Reynes <[email protected]>
--- arch/arm/boot/dts/imx27-apf27dev.dts | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)
Changelog:
v2: (thanks Alexander Shiyan for the feedback)
- spi mode 0 is the default so no need to explicitly define it
arch/arm/boot/dts/imx27-apf27dev.dts +17 -0
@@ -82,6 +82,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc at 0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 {
@@ -230,6 +240,13 @@ pinctrl_sdhc2_cd: sdhc2cdgrp { fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>; }; + + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0 + MX27_PAD_UART1_RTS__GPIO5_15 0 + >; + }; }; };
Signature · 1 line
1.7.4.4
Sun, 31 Aug 2014 00:00:57 +0200 ?? Philippe Reynes <[email protected]>:
Quoted 34 lines
Signed-off-by Philippe Reynes <[email protected]>--- arch/arm/boot/dts/imx27-apf27dev.dts | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)Changelog:
v2: (thanks Alexander Shiyan for the feedback)
- spi mode 0 is the default so no need to explicitly define itarch/arm/boot/dts/imx27-apf27dev.dts +10
-0@@ -82,6 +82,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc at 0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 {@@ -230,6 +240,13 @@ pinctrl_sdhc2_cd: sdhc2cdgrp { fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
arch/arm/boot/dts/imx27-apf27dev.dts line 251
Quoted 10 lines
arch/arm/boot/dts/imx27-apf27dev.dts +7
-0}; + + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0 + MX27_PAD_UART1_RTS__GPIO5_15 0 + >; + }; }; };
Only one remark.
Function of GPIO5.14 is unclear. Can you add a comment for this?
---