apf27dev: add max1027 in the dts
Subsystems (2)
PATCH v4 1/1 apf27dev: add max1027 in the dts
Signed-off-by Philippe Reynes <[email protected]>
--- arch/arm/boot/dts/imx27-apf27dev.dts | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)
Changelog:
v4: (thanks Shawn Guo for the feedback)
- put max1027 pinctl in the right place
- use 0x0 instead of 0
v3: (thanks Alexander Shiyan for the feedback)
- add datasheet pin name as comment
v2: (thanks Alexander Shiyan for the feedback)
- spi mode 0 is the default so no need to explicitly define it
arch/arm/boot/dts/imx27-apf27dev.dts +17 -0
@@ -82,6 +82,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc at 0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 {
@@ -210,6 +220,13 @@ >; }; + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; + pinctrl_pwm: pwmgrp { fsl,pins = < MX27_PAD_PWMO__PWMO 0x0
Signature · 1 line
1.7.4.4
Quoted 2 lines · Philippe Reynes
Signed-off-by Philippe Reynes <[email protected]>
Added "ARM: dts: " as the patch subject prefix, and applied the patch.
Shawn
Quoted 53 lines
--- arch/arm/boot/dts/imx27-apf27dev.dts | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)Changelog:
v4: (thanks Shawn Guo for the feedback)
- put max1027 pinctl in the right place
- use0x0instead of 0v3: (thanks Alexander Shiyan for the feedback)
- add datasheet pin name as commentv2: (thanks Alexander Shiyan for the feedback)
- spi mode 0 is the default so no need to explicitly define itarch/arm/boot/dts/imx27-apf27dev.dts +17
-0@@ -82,6 +82,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc at 0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 {@@ -210,6 +220,13 @@ >; }; + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; + pinctrl_pwm: pwmgrp { fsl,pins = < MX27_PAD_PWMO__PWMO 0x0Signature · 1 line
1.7.4.4