Skip to contentSkip to conversation

ARM: dts: am437x-gp: switch i2c0 to 100KHz

PATCH In review Nishanth Menon 2 participants 2 messages Sep 3, 2014 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: am437x-gp: switch i2c0 to 100KHz

On the GP EVM, the ambient light sensor is limited to 100KHz on the I2C bus.

So use 100kHz for I2C on the GP EVM due to this limitation on the ambient light sensor.

---
based on v3.17-rc1

 arch/arm/boot/dts/am437x-gp-evm.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/am437x-gp-evm.dts +1 -1
index 646a6ea..9559c19 100644
@@ -260,7 +260,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218 at 24 {
 		reg = <0x24>;
Signature · 1 line
1.7.9.5