Skip to contentSkip to conversation

add resize callback to ide/core

PATCH Applied John Snow 2 participants 4 messages Sep 5, 2014

lore
Share & tools
lore

John Snow

author
#0 lore raw

v4 cover add resize callback to ide/core

This patch series fixes incorrect IDENTIFY data returned for an IDE drive after a block_resize event by adding a resize callback for IDE devices.

Inconsistencies between identify routines are also removed so that they read easier.

V4:
- Added patch that makes the buffer and cache fill order for identify routines more consistent.
- Fixed a bug where the very first call to IDENTIFY does not return any size information.

V3:
- Factored out the size update into new functions.
- Fixed the size update for CFATA.
- Added assertion to clarify that ide_resize_cb is non-atapi.

V2:
- Do not attempt to update geometry values, to avoid clobbering user-specified values, if they exist.
- Do not regenerate the entire IDENTIFY buffer to avoid losing any settings that occurred during normal operation.

John Snow (2):
IDE: Fill the IDENTIFY request consistently
ide: Add resize callback to ide/core

 hw/ide/core.c | 97 +++++++++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 74 insertions(+), 23 deletions(-)
Signature · 1 line
1.9.3
author
#1 lore raw

PATCH v4 1/2 IDE: Fill the IDENTIFY request consistently

IDE-HD, IDE-ATAPI and IDE-CFATA all fill the identify buffer in slightly different ways, this is a relatively minor patch to make them uniform, to emphasize that:

(1) We build the s->identify_data cache first, then
(2) We copy it to s->io_buffer to fulfill the request.

---
 hw/ide/core.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)
hw/ide/core.c +15 -13
index b48127f..f5b1ef2 100644
@@ -81,13 +81,12 @@ static void ide_identify(IDEState *s)
     unsigned int oldsize;
     IDEDevice *dev = s->unit ? s->bus->slave : s->bus->master;
 
+    p = (uint16_t *)s->identify_data;
     if (s->identify_set) {
-	memcpy(s->io_buffer, s->identify_data, sizeof(s->identify_data));
-	return;
+        goto fill_buffer;
     }
+    memset(p, 0, sizeof(s->identify_data));
 
-    memset(s->io_buffer, 0, 512);
-    p = (uint16_t *)s->io_buffer;
     put_le16(p + 0, 0x0040);
     put_le16(p + 1, s->cylinders);
     put_le16(p + 3, s->heads);
@@ -180,21 +179,22 @@ static void ide_identify(IDEState *s)
         put_le16(p + 169, 1); /* TRIM support */
     }
 
-    memcpy(s->identify_data, p, sizeof(s->identify_data));
     s->identify_set = 1;
+
+fill_buffer:
+    memcpy(s->io_buffer, p, sizeof(s->identify_data));
 }
 
 static void ide_atapi_identify(IDEState *s)
 {
     uint16_t *p;
 
+    p = (uint16_t *)s->identify_data;
     if (s->identify_set) {
-	memcpy(s->io_buffer, s->identify_data, sizeof(s->identify_data));
-	return;
+        goto fill_buffer;
     }
+    memset(p, 0, sizeof(s->identify_data));
 
-    memset(s->io_buffer, 0, 512);
-    p = (uint16_t *)s->io_buffer;
     /* Removable CDROM, 50us response, 12 byte packets */
     put_le16(p + 0, (2 << 14) | (5 << 8) | (1 << 7) | (2 << 5) | (0 << 0));
     padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */
@@ -233,8 +233,10 @@ static void ide_atapi_identify(IDEState *s)
 #ifdef USE_DMA_CDROM
     put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */
 #endif
-    memcpy(s->identify_data, p, sizeof(s->identify_data));
     s->identify_set = 1;
+
+fill_buffer:
+    memcpy(s->io_buffer, p, sizeof(s->identify_data));
 }
 
 static void ide_cfata_identify(IDEState *s)
@@ -242,10 +244,10 @@ static void ide_cfata_identify(IDEState *s)
     uint16_t *p;
     uint32_t cur_sec;
 
-    p = (uint16_t *) s->identify_data;
-    if (s->identify_set)
+    p = (uint16_t *)s->identify_data;
+    if (s->identify_set) {
         goto fill_buffer;
-
+    }
     memset(p, 0, sizeof(s->identify_data));
 
     cur_sec = s->cylinders * s->heads * s->sectors;
Signature · 1 line
1.9.3
author
#2 lore raw

PATCH v4 2/2 ide: Add resize callback to ide/core

In reply to John Snow

Currently, if the block device backing the IDE drive is resized, the information about the device as cached inside of the IDEState structure is not updated, thus when a guest OS re-queries the drive, it is unable to see the expanded size.

This patch adds a resize callback that updates the IDENTIFY data buffer in order to correct this.

Lastly, a Linux guest as-is cannot resize a libata drive while in-use, but it can see the expanded size as part of a bus rescan event. This patch also allows guests such as Linux to see the new drive size after a soft reboot event, without having to exit the QEMU process.

---
 hw/ide/core.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 59 insertions(+), 10 deletions(-)
hw/ide/core.c +59 -10
index f5b1ef2..f077c0f 100644
@@ -75,6 +75,17 @@ static void put_le16(uint16_t *p, unsigned int v)
     *p = cpu_to_le16(v);
 }
 
+static void ide_identify_size(IDEState *s)
+{
+    uint16_t *p = (uint16_t *)s->identify_data;
+    put_le16(p + 60, s->nb_sectors);
+    put_le16(p + 61, s->nb_sectors >> 16);
+    put_le16(p + 100, s->nb_sectors);
+    put_le16(p + 101, s->nb_sectors >> 16);
+    put_le16(p + 102, s->nb_sectors >> 32);
+    put_le16(p + 103, s->nb_sectors >> 48);
+}
+
 static void ide_identify(IDEState *s)
 {
     uint16_t *p;
@@ -115,8 +126,8 @@ static void ide_identify(IDEState *s)
     put_le16(p + 58, oldsize >> 16);
     if (s->mult_sectors)
         put_le16(p + 59, 0x100 | s->mult_sectors);
-    put_le16(p + 60, s->nb_sectors);
-    put_le16(p + 61, s->nb_sectors >> 16);
+    /* *(p + 60) := nb_sectors       -- see ide_identify_size */
+    /* *(p + 61) := nb_sectors >> 16 -- see ide_identify_size */
     put_le16(p + 62, 0x07); /* single word dma0-2 supported */
     put_le16(p + 63, 0x07); /* mdma0-2 supported */
     put_le16(p + 64, 0x03); /* pio3-4 supported */
@@ -161,10 +172,10 @@ static void ide_identify(IDEState *s)
     }
     put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */
     put_le16(p + 93, 1 | (1 << 14) | 0x2000);
-    put_le16(p + 100, s->nb_sectors);
-    put_le16(p + 101, s->nb_sectors >> 16);
-    put_le16(p + 102, s->nb_sectors >> 32);
-    put_le16(p + 103, s->nb_sectors >> 48);
+    /* *(p + 100) := nb_sectors       -- see ide_identify_size */
+    /* *(p + 101) := nb_sectors >> 16 -- see ide_identify_size */
+    /* *(p + 102) := nb_sectors >> 32 -- see ide_identify_size */
+    /* *(p + 103) := nb_sectors >> 48 -- see ide_identify_size */
 
     if (dev && dev->conf.physical_block_size)
         put_le16(p + 106, 0x6000 | get_physical_block_exp(&dev->conf));
@@ -179,6 +190,7 @@ static void ide_identify(IDEState *s)
         put_le16(p + 169, 1); /* TRIM support */
     }
 
+    ide_identify_size(s);
     s->identify_set = 1;
 
 fill_buffer:
@@ -239,6 +251,15 @@ fill_buffer:
     memcpy(s->io_buffer, p, sizeof(s->identify_data));
 }
 
+static void ide_cfata_identify_size(IDEState *s)
+{
+    uint16_t *p = (uint16_t *)s->identify_data;
+    put_le16(p + 7, s->nb_sectors >> 16);  /* Sectors per card */
+    put_le16(p + 8, s->nb_sectors);        /* Sectors per card */
+    put_le16(p + 60, s->nb_sectors);       /* Total LBA sectors */
+    put_le16(p + 61, s->nb_sectors >> 16); /* Total LBA sectors */
+}
+
 static void ide_cfata_identify(IDEState *s)
 {
     uint16_t *p;
@@ -256,8 +277,8 @@ static void ide_cfata_identify(IDEState *s)
     put_le16(p + 1, s->cylinders);		/* Default cylinders */
     put_le16(p + 3, s->heads);			/* Default heads */
     put_le16(p + 6, s->sectors);		/* Default sectors per track */
-    put_le16(p + 7, s->nb_sectors >> 16);	/* Sectors per card */
-    put_le16(p + 8, s->nb_sectors);		/* Sectors per card */
+    /* *(p + 7) := nb_sectors >> 16 -- see ide_cfata_identify_size */
+    /* *(p + 8) := nb_sectors       -- see ide_cfata_identify_size */
     padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */
     put_le16(p + 22, 0x0004);			/* ECC bytes */
     padstr((char *) (p + 23), s->version, 8);	/* Firmware Revision */
@@ -278,8 +299,8 @@ static void ide_cfata_identify(IDEState *s)
     put_le16(p + 58, cur_sec >> 16);		/* Current capacity */
     if (s->mult_sectors)			/* Multiple sector setting */
         put_le16(p + 59, 0x100 | s->mult_sectors);
-    put_le16(p + 60, s->nb_sectors);		/* Total LBA sectors */
-    put_le16(p + 61, s->nb_sectors >> 16);	/* Total LBA sectors */
+    /* *(p + 60) := nb_sectors       -- see ide_cfata_identify_size */
+    /* *(p + 61) := nb_sectors >> 16 -- see ide_cfata_identify_size */
     put_le16(p + 63, 0x0203);			/* Multiword DMA capability */
     put_le16(p + 64, 0x0001);			/* Flow Control PIO support */
     put_le16(p + 65, 0x0096);			/* Min. Multiword DMA cycle */
@@ -299,6 +320,7 @@ static void ide_cfata_identify(IDEState *s)
     put_le16(p + 160, 0x8100);			/* Power requirement */
     put_le16(p + 161, 0x8001);			/* CF command set */
 
+    ide_cfata_identify_size(s);
     s->identify_set = 1;
 
 fill_buffer:
@@ -2117,6 +2139,28 @@ static bool ide_cd_is_medium_locked(void *opaque)
     return ((IDEState *)opaque)->tray_locked;
 }
 
+static void ide_resize_cb(void *opaque)
+{
+    IDEState *s = opaque;
+    uint64_t nb_sectors;
+
+    if (!s->identify_set) {
+        return;
+    }
+
+    bdrv_get_geometry(s->bs, &nb_sectors);
+    s->nb_sectors = nb_sectors;
+
+    /* Update the identify data buffer. */
+    if (s->drive_kind == IDE_CFATA) {
+        ide_cfata_identify_size(s);
+    } else {
+        /* IDE_CD uses a different set of callbacks entirely. */
+        assert(s->drive_kind != IDE_CD);
+        ide_identify_size(s);
+    }
+}
+
 static const BlockDevOps ide_cd_block_ops = {
     .change_media_cb = ide_cd_change_cb,
     .eject_request_cb = ide_cd_eject_request_cb,
@@ -2124,6 +2168,10 @@ static const BlockDevOps ide_cd_block_ops = {
     .is_medium_locked = ide_cd_is_medium_locked,
 };
 
+static const BlockDevOps ide_hd_block_ops = {
+    .resize_cb = ide_resize_cb,
+};
+
 int ide_init_drive(IDEState *s, BlockDriverState *bs, IDEDriveKind kind,
                    const char *version, const char *serial, const char *model,
                    uint64_t wwn,
@@ -2160,6 +2208,7 @@ int ide_init_drive(IDEState *s, BlockDriverState *bs, IDEDriveKind kind,
             error_report("Can't use a read-only drive");
             return -1;
         }
+        bdrv_set_dev_ops(bs, &ide_hd_block_ops, s);
     }
     if (serial) {
         pstrcpy(s->drive_serial_str, sizeof(s->drive_serial_str), serial);
Signature · 1 line
1.9.3
#3 lore raw
In reply to John Snow
Quoted 24 lines · John Snow

This patch series fixes incorrect IDENTIFY data returned for an IDE drive after a block_resize event by adding a resize callback for IDE devices.

Inconsistencies between identify routines are also removed so that they read easier.

V4:
- Added patch that makes the buffer and cache fill order for identify routines more consistent.
- Fixed a bug where the very first call to IDENTIFY does not return any size information.

V3:
- Factored out the size update into new functions.
- Fixed the size update for CFATA.
- Added assertion to clarify that ide_resize_cb is non-atapi.

V2:
- Do not attempt to update geometry values, to avoid clobbering user-specified values, if they exist.
- Do not regenerate the entire IDENTIFY buffer to avoid losing any settings that occurred during normal operation.

Quoted 11 lines

John Snow (2):
IDE: Fill the IDENTIFY request consistently
ide: Add resize callback to ide/core

 hw/ide/core.c | 97 +++++++++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 74 insertions(+), 23 deletions(-)
Signature · 1 line
1.9.3

Thanks, applied to my block tree:
https://github.com/stefanha/qemu/commits/block

Stefan