Trouble building PDF on Arch
Hey everyone,
I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).
Here's the log:
http://illest.net/~will/perfbook.log.txt
Thanks,
-w
Quoted 8 lines · William Light
Hey everyone,
I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).
Here's the log:
http://illest.net/~will/perfbook.log.txt
Hmmmm... Works for me. (Famous last words!)
The table that it is complaining about should look as shown below. If not, please revert back to the original. If it does, please try deleting it as a diagnostic measure.
What environment are you building in?
Thanx, Paul
------------------------------------------------------------------------
\begin{table*}
\scriptsize
\begin{center}
\begin{tabular}{l|l|l}
Category & POSIX & Linux Kernel \\
\hline
\hline
Thread Management
& \co{pthread_t}
& \co{struct task_struct} \\
\cline{2-3}
& \co{pthread_create()}
& \co{kthread_create} \\
\cline{2-3}
& \co{pthread_exit()}
& \co{kthread_should_stop()}~~~~~(rough) \\
\cline{2-3}
& \co{pthread_join()}
& \co{kthread_stop()}~~~(rough) \\
\cline{2-3}
& \co{poll(NULL, 0, 5)}
& \co{schedule_timeout_interruptible()} ~~~ \\
\hline
\hline
POSIX Locking
& \co{pthread_mutex_t}
& \co{spinlock_t}~~~(rough) \\
& & \co{struct mutex} \\
\cline{2-3}
& \co{PTHREAD_MUTEX_INITIALIZER}
& \co{DEFINE_SPINLOCK()} \\
& & \co{DEFINE_MUTEX()} \\
\cline{2-3}
& \co{pthread_mutex_lock()}
& \co{spin_lock()}~~~(and friends) \\
& & \co{mutex_lock()}~~~(and friends) \\
\cline{2-3}
& \co{pthread_mutex_unlock()}
& \co{spin_unlock()}~~~(and friends) \\
& & \co{mutex_unlock()} \\
\hline
\hline
POSIX Reader-Writer
& \co{pthread_rwlock_t}
& \co{rwlock_t}~~~(rough) \\
Locking & & \co{struct rw_semaphore} \\
\cline{2-3}
& \co{PTHREAD_RWLOCK_INITIALIZER}
& \co{DEFINE_RWLOCK()} \\
& & \co{DECLARE_RWSEM()} \\
\cline{2-3}
& \co{pthread_rwlock_rdlock()}
& \co{read_lock()}~~~(and friends) \\
& & \co{down_read()}~~~(and friends) \\
\cline{2-3}
& \co{pthread_rwlock_unlock()}
& \co{read_unlock()}~~~(and friends) \\
& & \co{up_read()} \\
\cline{2-3}
& \co{pthread_rwlock_wrlock()}
& \co{write_lock()}~~~(and friends) \\
& & \co{down_write()}~~~(and friends) \\
\cline{2-3}
& \co{pthread_rwlock_unlock()}
& \co{write_unlock()}~~~(and friends) \\
& & \co{up_write()} \\
\hline
\hline
Atomic Operations
& C Scalar Types
& \co{atomic_t} \\
& & \co{atomic64_t} \\
\cline{2-3}
& \co{__sync_fetch_and_add()}
& \co{atomic_add_return()} \\
& & \co{atomic64_add_return()} \\
\cline{2-3}
& \co{__sync_fetch_and_sub()}
& \co{atomic_sub_return()} \\
& & \co{atomic64_sub_return()} \\
\cline{2-3}
& \co{__sync_val_compare_and_swap()} ~~~~~~~~~~
& \co{cmpxchg()} \\
\cline{2-3}
& \co{__sync_lock_test_and_set()}
& \co{xchg()}~~~(rough) \\
\cline{2-3}
& \co{__sync_synchronize()}
& \co{smp_mb()} \\\end{tabular}
\end{center}
\caption{Mapping from POSIX to Linux-Kernel Primitives} \label{tab:advsync:Mapping from POSIX to Linux-Kernel Primitives} \end{table*}
Paul,
It turned out to be a LaTex bug, actually! More information here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752773
Norbert Preining's fix worked for me.
-w
Quoted 121 lines · Paul E. McKenney
Quoted 8 lines · William Light
Hey everyone,
I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).
Here's the log:
http://illest.net/~will/perfbook.log.txtHmmmm... Works for me. (Famous last words!)
The table that it is complaining about should look as shown below. If not, please revert back to the original. If it does, please try deleting it as a diagnostic measure.
What environment are you building in?
Thanx, Paul
------------------------------------------------------------------------
\begin{table*}
\scriptsize
\begin{center}
\begin{tabular}{l|l|l}Category & POSIX & Linux Kernel \\ \hline \hline Thread Management & \co{pthread_t} & \co{struct task_struct} \\ \cline{2-3} & \co{pthread_create()} & \co{kthread_create} \\ \cline{2-3} & \co{pthread_exit()} & \co{kthread_should_stop()}~~~~~(rough) \\ \cline{2-3} & \co{pthread_join()} & \co{kthread_stop()}~~~(rough) \\ \cline{2-3} & \co{poll(NULL, 0, 5)} & \co{schedule_timeout_interruptible()} ~~~ \\ \hline \hline POSIX Locking & \co{pthread_mutex_t} & \co{spinlock_t}~~~(rough) \\ & & \co{struct mutex} \\ \cline{2-3} & \co{PTHREAD_MUTEX_INITIALIZER} & \co{DEFINE_SPINLOCK()} \\ & & \co{DEFINE_MUTEX()} \\ \cline{2-3} & \co{pthread_mutex_lock()} & \co{spin_lock()}~~~(and friends) \\ & & \co{mutex_lock()}~~~(and friends) \\ \cline{2-3} & \co{pthread_mutex_unlock()} & \co{spin_unlock()}~~~(and friends) \\ & & \co{mutex_unlock()} \\ \hline \hline POSIX Reader-Writer & \co{pthread_rwlock_t} & \co{rwlock_t}~~~(rough) \\ Locking & & \co{struct rw_semaphore} \\ \cline{2-3} & \co{PTHREAD_RWLOCK_INITIALIZER} & \co{DEFINE_RWLOCK()} \\ & & \co{DECLARE_RWSEM()} \\ \cline{2-3} & \co{pthread_rwlock_rdlock()} & \co{read_lock()}~~~(and friends) \\ & & \co{down_read()}~~~(and friends) \\ \cline{2-3} & \co{pthread_rwlock_unlock()} & \co{read_unlock()}~~~(and friends) \\ & & \co{up_read()} \\ \cline{2-3} & \co{pthread_rwlock_wrlock()} & \co{write_lock()}~~~(and friends) \\ & & \co{down_write()}~~~(and friends) \\ \cline{2-3} & \co{pthread_rwlock_unlock()} & \co{write_unlock()}~~~(and friends) \\ & & \co{up_write()} \\ \hline \hline Atomic Operations & C Scalar Types & \co{atomic_t} \\ & & \co{atomic64_t} \\ \cline{2-3} & \co{__sync_fetch_and_add()} & \co{atomic_add_return()} \\ & & \co{atomic64_add_return()} \\ \cline{2-3} & \co{__sync_fetch_and_sub()} & \co{atomic_sub_return()} \\ & & \co{atomic64_sub_return()} \\ \cline{2-3} & \co{__sync_val_compare_and_swap()} ~~~~~~~~~~ & \co{cmpxchg()} \\ \cline{2-3} & \co{__sync_lock_test_and_set()} & \co{xchg()}~~~(rough) \\ \cline{2-3} & \co{__sync_synchronize()} & \co{smp_mb()} \\\end{tabular}
\end{center}
\caption{Mapping from POSIX to Linux-Kernel Primitives} \label{tab:advsync:Mapping from POSIX to Linux-Kernel Primitives} \end{table*}--
To unsubscribe from this list: send the line "unsubscribe perfbook" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 6 lines · William Light
Paul,
It turned out to be a LaTex bug, actually! More information here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752773Norbert Preining's fix worked for me.
Good to hear that it was fixed!
Thanx, Paul
Quoted 125 lines
-w
Quoted 121 lines · Paul E. McKenney
Quoted 8 lines · William Light
Hey everyone,
I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).
Here's the log:
http://illest.net/~will/perfbook.log.txtHmmmm... Works for me. (Famous last words!)
The table that it is complaining about should look as shown below. If not, please revert back to the original. If it does, please try deleting it as a diagnostic measure.
What environment are you building in?
Thanx, Paul
------------------------------------------------------------------------
\begin{table*}
\scriptsize
\begin{center}
\begin{tabular}{l|l|l}Category & POSIX & Linux Kernel \\ \hline \hline Thread Management & \co{pthread_t} & \co{struct task_struct} \\ \cline{2-3} & \co{pthread_create()} & \co{kthread_create} \\ \cline{2-3} & \co{pthread_exit()} & \co{kthread_should_stop()}~~~~~(rough) \\ \cline{2-3} & \co{pthread_join()} & \co{kthread_stop()}~~~(rough) \\ \cline{2-3} & \co{poll(NULL, 0, 5)} & \co{schedule_timeout_interruptible()} ~~~ \\ \hline \hline POSIX Locking & \co{pthread_mutex_t} & \co{spinlock_t}~~~(rough) \\ & & \co{struct mutex} \\ \cline{2-3} & \co{PTHREAD_MUTEX_INITIALIZER} & \co{DEFINE_SPINLOCK()} \\ & & \co{DEFINE_MUTEX()} \\ \cline{2-3} & \co{pthread_mutex_lock()} & \co{spin_lock()}~~~(and friends) \\ & & \co{mutex_lock()}~~~(and friends) \\ \cline{2-3} & \co{pthread_mutex_unlock()} & \co{spin_unlock()}~~~(and friends) \\ & & \co{mutex_unlock()} \\ \hline \hline POSIX Reader-Writer & \co{pthread_rwlock_t} & \co{rwlock_t}~~~(rough) \\ Locking & & \co{struct rw_semaphore} \\ \cline{2-3} & \co{PTHREAD_RWLOCK_INITIALIZER} & \co{DEFINE_RWLOCK()} \\ & & \co{DECLARE_RWSEM()} \\ \cline{2-3} & \co{pthread_rwlock_rdlock()} & \co{read_lock()}~~~(and friends) \\ & & \co{down_read()}~~~(and friends) \\ \cline{2-3} & \co{pthread_rwlock_unlock()} & \co{read_unlock()}~~~(and friends) \\ & & \co{up_read()} \\ \cline{2-3} & \co{pthread_rwlock_wrlock()} & \co{write_lock()}~~~(and friends) \\ & & \co{down_write()}~~~(and friends) \\ \cline{2-3} & \co{pthread_rwlock_unlock()} & \co{write_unlock()}~~~(and friends) \\ & & \co{up_write()} \\ \hline \hline Atomic Operations & C Scalar Types & \co{atomic_t} \\ & & \co{atomic64_t} \\ \cline{2-3} & \co{__sync_fetch_and_add()} & \co{atomic_add_return()} \\ & & \co{atomic64_add_return()} \\ \cline{2-3} & \co{__sync_fetch_and_sub()} & \co{atomic_sub_return()} \\ & & \co{atomic64_sub_return()} \\ \cline{2-3} & \co{__sync_val_compare_and_swap()} ~~~~~~~~~~ & \co{cmpxchg()} \\ \cline{2-3} & \co{__sync_lock_test_and_set()} & \co{xchg()}~~~(rough) \\ \cline{2-3} & \co{__sync_synchronize()} & \co{smp_mb()} \\\end{tabular}
\end{center}
\caption{Mapping from POSIX to Linux-Kernel Primitives} \label{tab:advsync:Mapping from POSIX to Linux-Kernel Primitives} \end{table*}--
To unsubscribe from this list: send the line "unsubscribe perfbook" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html