Skip to contentSkip to conversation

Trouble building PDF on Arch

DISCUSSION William Light 2 participants 4 messages Sep 26, 2014 – Oct 4, 2014

lore
Share & tools
lore
#0 lore raw

Hey everyone,

I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).

Here's the log:
http://illest.net/~will/perfbook.log.txt

Thanks,
-w

#1 lore raw
Quoted 8 lines · William Light

Hey everyone,

I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).

Here's the log:
http://illest.net/~will/perfbook.log.txt

Hmmmm... Works for me. (Famous last words!)

The table that it is complaining about should look as shown below. If not, please revert back to the original. If it does, please try deleting it as a diagnostic measure.

What environment are you building in?

Thanx, Paul

------------------------------------------------------------------------

\begin{table*}
\scriptsize
\begin{center}
\begin{tabular}{l|l|l}

	Category & POSIX & Linux Kernel \\
	\hline
	\hline
	Thread Management
		& \co{pthread_t}
			& \co{struct task_struct} \\
	\cline{2-3}
		& \co{pthread_create()}
			& \co{kthread_create} \\
	\cline{2-3}
		& \co{pthread_exit()}
			& \co{kthread_should_stop()}~~~~~(rough) \\
	\cline{2-3}
		& \co{pthread_join()}
			& \co{kthread_stop()}~~~(rough) \\
	\cline{2-3}
		& \co{poll(NULL, 0, 5)}
			& \co{schedule_timeout_interruptible()} ~~~ \\
	\hline
	\hline
	POSIX Locking
		& \co{pthread_mutex_t}
			& \co{spinlock_t}~~~(rough) \\
		&	& \co{struct mutex} \\
	\cline{2-3}
		& \co{PTHREAD_MUTEX_INITIALIZER}
			& \co{DEFINE_SPINLOCK()} \\
		&	& \co{DEFINE_MUTEX()} \\
	\cline{2-3}
		& \co{pthread_mutex_lock()}
			& \co{spin_lock()}~~~(and friends) \\
		&	& \co{mutex_lock()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_mutex_unlock()}
			& \co{spin_unlock()}~~~(and friends) \\
		&	& \co{mutex_unlock()} \\
	\hline
	\hline
	POSIX Reader-Writer
		& \co{pthread_rwlock_t}
			& \co{rwlock_t}~~~(rough) \\
	Locking	&	& \co{struct rw_semaphore} \\
	\cline{2-3}
		& \co{PTHREAD_RWLOCK_INITIALIZER}
			& \co{DEFINE_RWLOCK()} \\
		&	& \co{DECLARE_RWSEM()} \\
	\cline{2-3}
		& \co{pthread_rwlock_rdlock()}
			& \co{read_lock()}~~~(and friends) \\
		&	& \co{down_read()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_rwlock_unlock()}
			& \co{read_unlock()}~~~(and friends) \\
		&	& \co{up_read()} \\
	\cline{2-3}
		& \co{pthread_rwlock_wrlock()}
			& \co{write_lock()}~~~(and friends) \\
		&	& \co{down_write()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_rwlock_unlock()}
			& \co{write_unlock()}~~~(and friends) \\
		&	& \co{up_write()} \\
	\hline
	\hline
	Atomic Operations
		& C Scalar Types
			& \co{atomic_t} \\
		&	& \co{atomic64_t} \\
	\cline{2-3}
		& \co{__sync_fetch_and_add()}
			& \co{atomic_add_return()} \\
		&	& \co{atomic64_add_return()} \\
	\cline{2-3}
		& \co{__sync_fetch_and_sub()}
			& \co{atomic_sub_return()} \\
		&	& \co{atomic64_sub_return()} \\
	\cline{2-3}
		& \co{__sync_val_compare_and_swap()} ~~~~~~~~~~
			& \co{cmpxchg()} \\
	\cline{2-3}
		& \co{__sync_lock_test_and_set()}
			& \co{xchg()}~~~(rough) \\
	\cline{2-3}
		& \co{__sync_synchronize()}
			& \co{smp_mb()} \\

\end{tabular}
\end{center}
\caption{Mapping from POSIX to Linux-Kernel Primitives} \label{tab:advsync:Mapping from POSIX to Linux-Kernel Primitives} \end{table*}

#2 lore raw

Paul,

It turned out to be a LaTex bug, actually! More information here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752773

Norbert Preining's fix worked for me.

-w

Quoted 121 lines · Paul E. McKenney
Quoted 8 lines · William Light

Hey everyone,

I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).

Here's the log:
http://illest.net/~will/perfbook.log.txt

Hmmmm... Works for me. (Famous last words!)

The table that it is complaining about should look as shown below. If not, please revert back to the original. If it does, please try deleting it as a diagnostic measure.

What environment are you building in?

Thanx, Paul

------------------------------------------------------------------------

\begin{table*}
\scriptsize
\begin{center}
\begin{tabular}{l|l|l}

	Category & POSIX & Linux Kernel \\
	\hline
	\hline
	Thread Management
		& \co{pthread_t}
			& \co{struct task_struct} \\
	\cline{2-3}
		& \co{pthread_create()}
			& \co{kthread_create} \\
	\cline{2-3}
		& \co{pthread_exit()}
			& \co{kthread_should_stop()}~~~~~(rough) \\
	\cline{2-3}
		& \co{pthread_join()}
			& \co{kthread_stop()}~~~(rough) \\
	\cline{2-3}
		& \co{poll(NULL, 0, 5)}
			& \co{schedule_timeout_interruptible()} ~~~ \\
	\hline
	\hline
	POSIX Locking
		& \co{pthread_mutex_t}
			& \co{spinlock_t}~~~(rough) \\
		&	& \co{struct mutex} \\
	\cline{2-3}
		& \co{PTHREAD_MUTEX_INITIALIZER}
			& \co{DEFINE_SPINLOCK()} \\
		&	& \co{DEFINE_MUTEX()} \\
	\cline{2-3}
		& \co{pthread_mutex_lock()}
			& \co{spin_lock()}~~~(and friends) \\
		&	& \co{mutex_lock()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_mutex_unlock()}
			& \co{spin_unlock()}~~~(and friends) \\
		&	& \co{mutex_unlock()} \\
	\hline
	\hline
	POSIX Reader-Writer
		& \co{pthread_rwlock_t}
			& \co{rwlock_t}~~~(rough) \\
	Locking	&	& \co{struct rw_semaphore} \\
	\cline{2-3}
		& \co{PTHREAD_RWLOCK_INITIALIZER}
			& \co{DEFINE_RWLOCK()} \\
		&	& \co{DECLARE_RWSEM()} \\
	\cline{2-3}
		& \co{pthread_rwlock_rdlock()}
			& \co{read_lock()}~~~(and friends) \\
		&	& \co{down_read()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_rwlock_unlock()}
			& \co{read_unlock()}~~~(and friends) \\
		&	& \co{up_read()} \\
	\cline{2-3}
		& \co{pthread_rwlock_wrlock()}
			& \co{write_lock()}~~~(and friends) \\
		&	& \co{down_write()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_rwlock_unlock()}
			& \co{write_unlock()}~~~(and friends) \\
		&	& \co{up_write()} \\
	\hline
	\hline
	Atomic Operations
		& C Scalar Types
			& \co{atomic_t} \\
		&	& \co{atomic64_t} \\
	\cline{2-3}
		& \co{__sync_fetch_and_add()}
			& \co{atomic_add_return()} \\
		&	& \co{atomic64_add_return()} \\
	\cline{2-3}
		& \co{__sync_fetch_and_sub()}
			& \co{atomic_sub_return()} \\
		&	& \co{atomic64_sub_return()} \\
	\cline{2-3}
		& \co{__sync_val_compare_and_swap()} ~~~~~~~~~~
			& \co{cmpxchg()} \\
	\cline{2-3}
		& \co{__sync_lock_test_and_set()}
			& \co{xchg()}~~~(rough) \\
	\cline{2-3}
		& \co{__sync_synchronize()}
			& \co{smp_mb()} \\

\end{tabular}
\end{center}
\caption{Mapping from POSIX to Linux-Kernel Primitives} \label{tab:advsync:Mapping from POSIX to Linux-Kernel Primitives} \end{table*}

--
To unsubscribe from this list: send the line "unsubscribe perfbook" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
Quoted 6 lines · William Light

Paul,

It turned out to be a LaTex bug, actually! More information here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752773

Norbert Preining's fix worked for me.

Good to hear that it was fixed!

Thanx, Paul

Quoted 125 lines

-w

Quoted 121 lines · Paul E. McKenney
Quoted 8 lines · William Light

Hey everyone,

I'm trying to build the perfbook PDF from a git clone, but latex keeps exiting with a fatal error. I've installed just about everything texlive-related (there's a catch-all package called texlive-most).

Here's the log:
http://illest.net/~will/perfbook.log.txt

Hmmmm... Works for me. (Famous last words!)

The table that it is complaining about should look as shown below. If not, please revert back to the original. If it does, please try deleting it as a diagnostic measure.

What environment are you building in?

Thanx, Paul

------------------------------------------------------------------------

\begin{table*}
\scriptsize
\begin{center}
\begin{tabular}{l|l|l}

	Category & POSIX & Linux Kernel \\
	\hline
	\hline
	Thread Management
		& \co{pthread_t}
			& \co{struct task_struct} \\
	\cline{2-3}
		& \co{pthread_create()}
			& \co{kthread_create} \\
	\cline{2-3}
		& \co{pthread_exit()}
			& \co{kthread_should_stop()}~~~~~(rough) \\
	\cline{2-3}
		& \co{pthread_join()}
			& \co{kthread_stop()}~~~(rough) \\
	\cline{2-3}
		& \co{poll(NULL, 0, 5)}
			& \co{schedule_timeout_interruptible()} ~~~ \\
	\hline
	\hline
	POSIX Locking
		& \co{pthread_mutex_t}
			& \co{spinlock_t}~~~(rough) \\
		&	& \co{struct mutex} \\
	\cline{2-3}
		& \co{PTHREAD_MUTEX_INITIALIZER}
			& \co{DEFINE_SPINLOCK()} \\
		&	& \co{DEFINE_MUTEX()} \\
	\cline{2-3}
		& \co{pthread_mutex_lock()}
			& \co{spin_lock()}~~~(and friends) \\
		&	& \co{mutex_lock()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_mutex_unlock()}
			& \co{spin_unlock()}~~~(and friends) \\
		&	& \co{mutex_unlock()} \\
	\hline
	\hline
	POSIX Reader-Writer
		& \co{pthread_rwlock_t}
			& \co{rwlock_t}~~~(rough) \\
	Locking	&	& \co{struct rw_semaphore} \\
	\cline{2-3}
		& \co{PTHREAD_RWLOCK_INITIALIZER}
			& \co{DEFINE_RWLOCK()} \\
		&	& \co{DECLARE_RWSEM()} \\
	\cline{2-3}
		& \co{pthread_rwlock_rdlock()}
			& \co{read_lock()}~~~(and friends) \\
		&	& \co{down_read()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_rwlock_unlock()}
			& \co{read_unlock()}~~~(and friends) \\
		&	& \co{up_read()} \\
	\cline{2-3}
		& \co{pthread_rwlock_wrlock()}
			& \co{write_lock()}~~~(and friends) \\
		&	& \co{down_write()}~~~(and friends) \\
	\cline{2-3}
		& \co{pthread_rwlock_unlock()}
			& \co{write_unlock()}~~~(and friends) \\
		&	& \co{up_write()} \\
	\hline
	\hline
	Atomic Operations
		& C Scalar Types
			& \co{atomic_t} \\
		&	& \co{atomic64_t} \\
	\cline{2-3}
		& \co{__sync_fetch_and_add()}
			& \co{atomic_add_return()} \\
		&	& \co{atomic64_add_return()} \\
	\cline{2-3}
		& \co{__sync_fetch_and_sub()}
			& \co{atomic_sub_return()} \\
		&	& \co{atomic64_sub_return()} \\
	\cline{2-3}
		& \co{__sync_val_compare_and_swap()} ~~~~~~~~~~
			& \co{cmpxchg()} \\
	\cline{2-3}
		& \co{__sync_lock_test_and_set()}
			& \co{xchg()}~~~(rough) \\
	\cline{2-3}
		& \co{__sync_synchronize()}
			& \co{smp_mb()} \\

\end{tabular}
\end{center}
\caption{Mapping from POSIX to Linux-Kernel Primitives} \label{tab:advsync:Mapping from POSIX to Linux-Kernel Primitives} \end{table*}

--
To unsubscribe from this list: send the line "unsubscribe perfbook" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html