Skip to contentSkip to conversation

mtd: ubi: Extend UBI layer debug/messaging capabilities

PATCH Superseded Tanya Brokhman 4 participants 6 messages Sep 30, 2014 – Oct 6, 2014

Subsystems (4)

v2 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 mtd: ubi: Extend UBI layer debug/messaging capabilities

If there is more then one UBI device mounted, there is no way to distinguish between messages from different UBI devices. Add device number to all ubi layer message types.

---
Changes from V1:
- Compilation error fixed
- macros were updated to receive the ubi structure as parameter and not just ubi_number
- Places in code, where ubi-messaging macros were used, but ubi struct is not present yet (init phase), were updated to just use pr_err or similar

Note for reviewers:
The updated macros are all in ubi.h. All other file changes are just technical changes for compilation (usage of the defined macros)

 drivers/mtd/ubi/attach.c  | 138 ++++++++++++++++++++----------------
 drivers/mtd/ubi/block.c   |   6 +-
 drivers/mtd/ubi/build.c   | 128 +++++++++++++++++++--------------
 drivers/mtd/ubi/cdev.c    |  37 +++++-----
 drivers/mtd/ubi/debug.c   |   9 +--
 drivers/mtd/ubi/eba.c     |  54 +++++++-------
 drivers/mtd/ubi/fastmap.c | 108 ++++++++++++++++------------
 drivers/mtd/ubi/io.c      | 177 +++++++++++++++++++++++++++-------------------
 drivers/mtd/ubi/kapi.c    |   6 +-
 drivers/mtd/ubi/misc.c    |   6 +-
 drivers/mtd/ubi/ubi.h     |  13 ++--
 drivers/mtd/ubi/vmt.c     |  76 +++++++++++---------
 drivers/mtd/ubi/vtbl.c    |  54 ++++++++------
 drivers/mtd/ubi/wl.c      |  89 ++++++++++++++---------
 14 files changed, 521 insertions(+), 380 deletions(-)
drivers/mtd/ubi/attach.c +78 -60
index 6f27d9a..739e9a6 100644
@@ -176,6 +176,7 @@ static int add_corrupted(struct ubi_attach_info *ai, int pnum, int ec)
 
 /**
  * validate_vid_hdr - check volume identifier header.
+ * @ubi: UBI device description object
  * @vid_hdr: the volume identifier header to check
  * @av: information about the volume this logical eraseblock belongs to
  * @pnum: physical eraseblock number the VID header came from
@@ -188,7 +189,8 @@ static int add_corrupted(struct ubi_attach_info *ai, int pnum, int ec)
  * information in the VID header is consistent to the information in other VID
  * headers of the same volume.
  */
-static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
+static int validate_vid_hdr(const struct ubi_device *ubi,
+			    const struct ubi_vid_hdr *vid_hdr,
 			    const struct ubi_ainf_volume *av, int pnum)
 {
 	int vol_type = vid_hdr->vol_type;
@@ -206,7 +208,7 @@ static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
 		 */
 
 		if (vol_id != av->vol_id) {
-			ubi_err("inconsistent vol_id");
+			ubi_err(ubi, "inconsistent vol_id");
 			goto bad;
 		}
 
@@ -216,17 +218,17 @@ static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
 			av_vol_type = UBI_VID_DYNAMIC;
 
 		if (vol_type != av_vol_type) {
-			ubi_err("inconsistent vol_type");
+			ubi_err(ubi, "inconsistent vol_type");
 			goto bad;
 		}
 
 		if (used_ebs != av->used_ebs) {
-			ubi_err("inconsistent used_ebs");
+			ubi_err(ubi, "inconsistent used_ebs");
 			goto bad;
 		}
 
 		if (data_pad != av->data_pad) {
-			ubi_err("inconsistent data_pad");
+			ubi_err(ubi, "inconsistent data_pad");
 			goto bad;
 		}
 	}
@@ -234,7 +236,7 @@ static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
 	return 0;
 
 bad:
-	ubi_err("inconsistent VID header at PEB %d", pnum);
+	ubi_err(ubi, "inconsistent VID header at PEB %d", pnum);
 	ubi_dump_vid_hdr(vid_hdr);
 	ubi_dump_av(av);
 	return -EINVAL;
@@ -336,7 +338,7 @@ int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
 		 * support these images anymore. Well, those images still work,
 		 * but only if no unclean reboots happened.
 		 */
-		ubi_err("unsupported on-flash UBI format");
+		ubi_err(ubi, "unsupported on-flash UBI format");
 		return -EINVAL;
 	}
 
@@ -377,7 +379,7 @@ int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
 			if (err == UBI_IO_BITFLIPS)
 				bitflips = 1;
 			else {
-				ubi_err("VID of PEB %d header is bad, but it was OK earlier, err %d",
+				ubi_err(ubi, "VID of PEB %d header is bad, but it was OK earlier, err %d",
 					pnum, err);
 				if (err > 0)
 					err = -EIO;
@@ -507,7 +509,7 @@ int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
 		 * logical eraseblocks because there was an unclean reboot.
 		 */
 		if (aeb->sqnum == sqnum && sqnum != 0) {
-			ubi_err("two LEBs with same sequence number %llu",
+			ubi_err(ubi, "two LEBs with same sequence number %llu",
 				sqnum);
 			ubi_dump_aeb(aeb, 0);
 			ubi_dump_vid_hdr(vid_hdr);
@@ -527,7 +529,7 @@ int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
 			 * This logical eraseblock is newer than the one
 			 * found earlier.
 			 */
-			err = validate_vid_hdr(vid_hdr, av, pnum);
+			err = validate_vid_hdr(ubi, vid_hdr, av, pnum);
 			if (err)
 				return err;
 
@@ -565,7 +567,7 @@ int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
 	 * attaching information.
 	 */
 
-	err = validate_vid_hdr(vid_hdr, av, pnum);
+	err = validate_vid_hdr(ubi, vid_hdr, av, pnum);
 	if (err)
 		return err;
 
@@ -668,7 +670,8 @@ static int early_erase_peb(struct ubi_device *ubi,
 		 * Erase counter overflow. Upgrade UBI and use 64-bit
 		 * erase counters internally.
 		 */
-		ubi_err("erase counter overflow at PEB %d, EC %d", pnum, ec);
+		ubi_err(ubi,
+			"erase counter overflow at PEB %d, EC %d", pnum, ec);
 		return -EINVAL;
 	}
 
@@ -736,7 +739,7 @@ struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
 		return aeb;
 	}
 
-	ubi_err("no free eraseblocks");
+	ubi_err(ubi, "no free eraseblocks");
 	return ERR_PTR(-ENOSPC);
 }
 
@@ -785,9 +788,9 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 	if (ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->leb_size))
 		goto out_unlock;
 
-	ubi_err("PEB %d contains corrupted VID header, and the data does not contain all 0xFF",
+	ubi_err(ubi, "PEB %d contains corrupted VID header, and the data does not contain all 0xFF",
 		pnum);
-	ubi_err("this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection");
+	ubi_err(ubi, "this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection");
 	ubi_dump_vid_hdr(vid_hdr);
 	pr_err("hexdump of PEB %d offset %d, length %d",
 	       pnum, ubi->leb_start, ubi->leb_size);
@@ -859,7 +862,8 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 		bitflips = 1;
 		break;
 	default:
-		ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+		ubi_err(ubi,
+		  "'ubi_io_read_ec_hdr()' returned unknown code %d", err);
 		return -EINVAL;
 	}
 
@@ -868,7 +872,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 
 		/* Make sure UBI version is OK */
 		if (ech->version != UBI_VERSION) {
-			ubi_err("this UBI version is %d, image version is %d",
+			ubi_err(ubi, "this UBI version is %d, image version is %d",
 				UBI_VERSION, (int)ech->version);
 			return -EINVAL;
 		}
@@ -882,7 +886,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 			 * flash. Upgrade UBI and use 64-bit erase counters
 			 * internally.
 			 */
-			ubi_err("erase counter overflow, max is %d",
+			ubi_err(ubi, "erase counter overflow, max is %d",
 				UBI_MAX_ERASECOUNTER);
 			ubi_dump_ec_hdr(ech);
 			return -EINVAL;
@@ -903,7 +907,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 		if (!ubi->image_seq)
 			ubi->image_seq = image_seq;
 		if (image_seq && ubi->image_seq != image_seq) {
-			ubi_err("bad image sequence number %d in PEB %d, expected %d",
+			ubi_err(ubi, "bad image sequence number %d in PEB %d, expected %d",
 				image_seq, pnum, ubi->image_seq);
 			ubi_dump_ec_hdr(ech);
 			return -EINVAL;
@@ -981,7 +985,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 			return err;
 		goto adjust_mean_ec;
 	default:
-		ubi_err("'ubi_io_read_vid_hdr()' returned unknown code %d",
+		ubi_err(ubi, "'ubi_io_read_vid_hdr()' returned unknown code %d",
 			err);
 		return -EINVAL;
 	}
@@ -999,7 +1003,8 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 		case UBI_COMPAT_DELETE:
 			if (vol_id != UBI_FM_SB_VOLUME_ID
 			    && vol_id != UBI_FM_DATA_VOLUME_ID) {
-				ubi_msg("\"delete\" compatible internal volume %d:%d found, will remove it",
+				ubi_msg(ubi,
+				   "\"delete\" compatible internal volume %d:%d found, will remove it",
 					vol_id, lnum);
 			}
 			err = add_to_list(ai, pnum, vol_id, lnum,
@@ -1009,13 +1014,15 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 			return 0;
 
 		case UBI_COMPAT_RO:
-			ubi_msg("read-only compatible internal volume %d:%d found, switch to read-only mode",
+			ubi_msg(ubi,
+				"read-only compatible internal volume %d:%d found, switch to read-only mode",
 				vol_id, lnum);
 			ubi->ro_mode = 1;
 			break;
 
 		case UBI_COMPAT_PRESERVE:
-			ubi_msg("\"preserve\" compatible internal volume %d:%d found",
+			ubi_msg(ubi,
+				"\"preserve\" compatible internal volume %d:%d found",
 				vol_id, lnum);
 			err = add_to_list(ai, pnum, vol_id, lnum,
 					  ec, 0, &ai->alien);
@@ -1024,14 +1031,14 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 			return 0;
 
 		case UBI_COMPAT_REJECT:
-			ubi_err("incompatible internal volume %d:%d found",
+			ubi_err(ubi, "incompatible internal volume %d:%d found",
 				vol_id, lnum);
 			return -EINVAL;
 		}
 	}
 
 	if (ec_err)
-		ubi_warn("valid VID header but corrupted EC header at PEB %d",
+		ubi_warn(ubi, "valid VID header but corrupted EC header at PEB %d",
 			 pnum);
 	err = ubi_add_to_av(ubi, ai, pnum, ec, vidh, bitflips);
 	if (err)
@@ -1075,7 +1082,7 @@ static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai)
 	 * with the flash HW or driver.
 	 */
 	if (ai->corr_peb_count) {
-		ubi_err("%d PEBs are corrupted and preserved",
+		ubi_err(ubi, "%d PEBs are corrupted and preserved",
 			ai->corr_peb_count);
 		pr_err("Corrupted PEBs are:");
 		list_for_each_entry(aeb, &ai->corr, u.list)
@@ -1087,7 +1094,7 @@ static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai)
 		 * otherwise, only print a warning.
 		 */
 		if (ai->corr_peb_count >= max_corr) {
-			ubi_err("too many corrupted PEBs, refusing");
+			ubi_err(ubi, "too many corrupted PEBs, refusing");
 			return -EINVAL;
 		}
 	}
@@ -1110,11 +1117,11 @@ static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai)
 		 */
 		if (ai->maybe_bad_peb_count <= 2) {
 			ai->is_empty = 1;
-			ubi_msg("empty MTD device detected");
+			ubi_msg(ubi, "empty MTD device detected");
 			get_random_bytes(&ubi->image_seq,
 					 sizeof(ubi->image_seq));
 		} else {
-			ubi_err("MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it");
+			ubi_err(ubi, "MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it");
 			return -EINVAL;
 		}
 
@@ -1248,7 +1255,7 @@ static int scan_all(struct ubi_device *ubi, struct ubi_attach_info *ai,
 			goto out_vidh;
 	}
 
-	ubi_msg("scanning is finished");
+	ubi_msg(ubi, "scanning is finished");
 
 	/* Calculate mean erase counter */
 	if (ai->ec_count)
@@ -1515,37 +1522,37 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 		vols_found += 1;
 
 		if (ai->is_empty) {
-			ubi_err("bad is_empty flag");
+			ubi_err(ubi, "bad is_empty flag");
 			goto bad_av;
 		}
 
 		if (av->vol_id < 0 || av->highest_lnum < 0 ||
 		    av->leb_count < 0 || av->vol_type < 0 || av->used_ebs < 0 ||
 		    av->data_pad < 0 || av->last_data_size < 0) {
-			ubi_err("negative values");
+			ubi_err(ubi, "negative values");
 			goto bad_av;
 		}
 
 		if (av->vol_id >= UBI_MAX_VOLUMES &&
 		    av->vol_id < UBI_INTERNAL_VOL_START) {
-			ubi_err("bad vol_id");
+			ubi_err(ubi, "bad vol_id");
 			goto bad_av;
 		}
 
 		if (av->vol_id > ai->highest_vol_id) {
-			ubi_err("highest_vol_id is %d, but vol_id %d is there",
+			ubi_err(ubi, "highest_vol_id is %d, but vol_id %d is there",
 				ai->highest_vol_id, av->vol_id);
 			goto out;
 		}
 
 		if (av->vol_type != UBI_DYNAMIC_VOLUME &&
 		    av->vol_type != UBI_STATIC_VOLUME) {
-			ubi_err("bad vol_type");
+			ubi_err(ubi, "bad vol_type");
 			goto bad_av;
 		}
 
 		if (av->data_pad > ubi->leb_size / 2) {
-			ubi_err("bad data_pad");
+			ubi_err(ubi, "bad data_pad");
 			goto bad_av;
 		}
 
@@ -1557,48 +1564,48 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 			leb_count += 1;
 
 			if (aeb->pnum < 0 || aeb->ec < 0) {
-				ubi_err("negative values");
+				ubi_err(ubi, "negative values");
 				goto bad_aeb;
 			}
 
 			if (aeb->ec < ai->min_ec) {
-				ubi_err("bad ai->min_ec (%d), %d found",
+				ubi_err(ubi, "bad ai->min_ec (%d), %d found",
 					ai->min_ec, aeb->ec);
 				goto bad_aeb;
 			}
 
 			if (aeb->ec > ai->max_ec) {
-				ubi_err("bad ai->max_ec (%d), %d found",
+				ubi_err(ubi, "bad ai->max_ec (%d), %d found",
 					ai->max_ec, aeb->ec);
 				goto bad_aeb;
 			}
 
 			if (aeb->pnum >= ubi->peb_count) {
-				ubi_err("too high PEB number %d, total PEBs %d",
+				ubi_err(ubi, "too high PEB number %d, total PEBs %d",
 					aeb->pnum, ubi->peb_count);
 				goto bad_aeb;
 			}
 
 			if (av->vol_type == UBI_STATIC_VOLUME) {
 				if (aeb->lnum >= av->used_ebs) {
-					ubi_err("bad lnum or used_ebs");
+					ubi_err(ubi, "bad lnum or used_ebs");
 					goto bad_aeb;
 				}
 			} else {
 				if (av->used_ebs != 0) {
-					ubi_err("non-zero used_ebs");
+					ubi_err(ubi, "non-zero used_ebs");
 					goto bad_aeb;
 				}
 			}
 
 			if (aeb->lnum > av->highest_lnum) {
-				ubi_err("incorrect highest_lnum or lnum");
+				ubi_err(ubi, "incorrect highest_lnum or lnum");
 				goto bad_aeb;
 			}
 		}
 
 		if (av->leb_count != leb_count) {
-			ubi_err("bad leb_count, %d objects in the tree",
+			ubi_err(ubi, "bad leb_count, %d objects in the tree",
 				leb_count);
 			goto bad_av;
 		}
@@ -1609,13 +1616,13 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 		aeb = last_aeb;
 
 		if (aeb->lnum != av->highest_lnum) {
-			ubi_err("bad highest_lnum");
+			ubi_err(ubi, "bad highest_lnum");
 			goto bad_aeb;
 		}
 	}
 
 	if (vols_found != ai->vols_found) {
-		ubi_err("bad ai->vols_found %d, should be %d",
+		ubi_err(ubi, "bad ai->vols_found %d, should be %d",
 			ai->vols_found, vols_found);
 		goto out;
 	}
@@ -1632,7 +1639,8 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 
 			err = ubi_io_read_vid_hdr(ubi, aeb->pnum, vidh, 1);
 			if (err && err != UBI_IO_BITFLIPS) {
-				ubi_err("VID header is not OK (%d)", err);
+				ubi_err(ubi,
+					"VID header is not OK (%d)", err);
 				if (err > 0)
 					err = -EIO;
 				return err;
@@ -1641,37 +1649,42 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 			vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
 				   UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
 			if (av->vol_type != vol_type) {
-				ubi_err("bad vol_type");
+				ubi_err(ubi, "bad vol_type");
 				goto bad_vid_hdr;
 			}
 
 			if (aeb->sqnum != be64_to_cpu(vidh->sqnum)) {
-				ubi_err("bad sqnum %llu", aeb->sqnum);
+				ubi_err(ubi,
+					"bad sqnum %llu", aeb->sqnum);
 				goto bad_vid_hdr;
 			}
 
 			if (av->vol_id != be32_to_cpu(vidh->vol_id)) {
-				ubi_err("bad vol_id %d", av->vol_id);
+				ubi_err(ubi,
+					"bad vol_id %d", av->vol_id);
 				goto bad_vid_hdr;
 			}
 
 			if (av->compat != vidh->compat) {
-				ubi_err("bad compat %d", vidh->compat);
+				ubi_err(ubi,
+					"bad compat %d", vidh->compat);
 				goto bad_vid_hdr;
 			}
 
 			if (aeb->lnum != be32_to_cpu(vidh->lnum)) {
-				ubi_err("bad lnum %d", aeb->lnum);
+				ubi_err(ubi, "bad lnum %d", aeb->lnum);
 				goto bad_vid_hdr;
 			}
 
 			if (av->used_ebs != be32_to_cpu(vidh->used_ebs)) {
-				ubi_err("bad used_ebs %d", av->used_ebs);
+				ubi_err(ubi,
+					"bad used_ebs %d", av->used_ebs);
 				goto bad_vid_hdr;
 			}
 
 			if (av->data_pad != be32_to_cpu(vidh->data_pad)) {
-				ubi_err("bad data_pad %d", av->data_pad);
+				ubi_err(ubi,
+					"bad data_pad %d", av->data_pad);
 				goto bad_vid_hdr;
 			}
 		}
@@ -1680,12 +1693,14 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 			continue;
 
 		if (av->highest_lnum != be32_to_cpu(vidh->lnum)) {
-			ubi_err("bad highest_lnum %d", av->highest_lnum);
+			ubi_err(ubi,
+				"bad highest_lnum %d", av->highest_lnum);
 			goto bad_vid_hdr;
 		}
 
 		if (av->last_data_size != be32_to_cpu(vidh->data_size)) {
-			ubi_err("bad last_data_size %d", av->last_data_size);
+			ubi_err(ubi,
+				"bad last_data_size %d", av->last_data_size);
 			goto bad_vid_hdr;
 		}
 	}
@@ -1726,7 +1741,7 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 	err = 0;
 	for (pnum = 0; pnum < ubi->peb_count; pnum++)
 		if (!buf[pnum]) {
-			ubi_err("PEB %d is not referred", pnum);
+			ubi_err(ubi, "PEB %d is not referred", pnum);
 			err = 1;
 		}
 
@@ -1736,18 +1751,21 @@ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 	return 0;
 
 bad_aeb:
-	ubi_err("bad attaching information about LEB %d", aeb->lnum);
+	ubi_err(ubi, "bad attaching information about LEB %d",
+		aeb->lnum);
 	ubi_dump_aeb(aeb, 0);
 	ubi_dump_av(av);
 	goto out;
 
 bad_av:
-	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_err(ubi, "bad attaching information about volume %d",
+		av->vol_id);
 	ubi_dump_av(av);
 	goto out;
 
 bad_vid_hdr:
-	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_err(ubi, "bad attaching information about volume %d",
+		av->vol_id);
 	ubi_dump_av(av);
 	ubi_dump_vid_hdr(vidh);
 
drivers/mtd/ubi/block.c +3 -3
index 33c6495..08c570f 100644
@@ -111,7 +111,7 @@ static int __init ubiblock_set_param(const char *val,
 
 	len = strnlen(val, UBIBLOCK_PARAM_LEN);
 	if (len == 0) {
-		ubi_warn("block: empty 'block=' parameter - ignored\n");
+		ubi_warn(ubi, "block: empty 'block=' parameter - ignored\n");
 		return 0;
 	}
 
@@ -505,7 +505,7 @@ static int ubiblock_resize(struct ubi_volume_info *vi)
 	u64 disk_capacity = ((u64)vi->size * vi->usable_leb_size) >> 9;
 
 	if ((sector_t)disk_capacity != disk_capacity) {
-		ubi_warn("%s: the volume is too big, cannot resize (%d LEBs)",
+		ubi_warn(ubi, "%s: the volume is too big, cannot resize (%d LEBs)",
 			 dev->gd->disk_name, vi->size);
 		return -EFBIG;
 	}
@@ -523,7 +523,7 @@ static int ubiblock_resize(struct ubi_volume_info *vi)
 
 	mutex_lock(&dev->dev_mutex);
 	set_capacity(dev->gd, disk_capacity);
-	ubi_msg("%s resized to %d LEBs", dev->gd->disk_name, vi->size);
+	ubi_msg(ubi, "%s resized to %d LEBs", dev->gd->disk_name, vi->size);
 	mutex_unlock(&dev->dev_mutex);
 	mutex_unlock(&devices_mutex);
 	return 0;
drivers/mtd/ubi/build.c +74 -54

398 lines not on this page · raw message

drivers/mtd/ubi/cdev.c +20 -17
index 7646220..aafef1e 100644
@@ -48,13 +48,14 @@
 
 /**
  * get_exclusive - get exclusive access to an UBI volume.
+ * @ubi: UBI device description object
  * @desc: volume descriptor
  *
  * This function changes UBI volume open mode to "exclusive". Returns previous
  * mode value (positive integer) in case of success and a negative error code
  * in case of failure.
  */
-static int get_exclusive(struct ubi_volume_desc *desc)
+static int get_exclusive(struct ubi_device *ubi, struct ubi_volume_desc *desc)
 {
 	int users, err;
 	struct ubi_volume *vol = desc->vol;
@@ -63,7 +64,8 @@ static int get_exclusive(struct ubi_volume_desc *desc)
 	users = vol->readers + vol->writers + vol->exclusive;
 	ubi_assert(users > 0);
 	if (users > 1) {
-		ubi_err("%d users for volume %d", users, vol->vol_id);
+		ubi_err(ubi, "%d users for volume %d",
+			users, vol->vol_id);
 		err = -EBUSY;
 	} else {
 		vol->readers = vol->writers = 0;
@@ -134,7 +136,7 @@ static int vol_cdev_release(struct inode *inode, struct file *file)
 		vol->ubi->ubi_num, vol->vol_id, desc->mode);
 
 	if (vol->updating) {
-		ubi_warn("update of volume %d not finished, volume is damaged",
+		ubi_warn(vol->ubi, "update of volume %d not finished, volume is damaged",
 			 vol->vol_id);
 		ubi_assert(!vol->changing_leb);
 		vol->updating = 0;
@@ -158,7 +160,7 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 
 	if (vol->updating) {
 		/* Update is in progress, seeking is prohibited */
-		ubi_err("updating");
+		ubi_err(vol->ubi, "updating");
 		return -EBUSY;
 	}
 
@@ -193,11 +195,11 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 		count, *offp, vol->vol_id);
 
 	if (vol->updating) {
-		ubi_err("updating");
+		ubi_err(vol->ubi, "updating");
 		return -EBUSY;
 	}
 	if (vol->upd_marker) {
-		ubi_err("damaged volume, update marker is set");
+		ubi_err(vol->ubi, "damaged volume, update marker is set");
 		return -EBADF;
 	}
 	if (*offp == vol->used_bytes || count == 0)
@@ -277,7 +279,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
 	if (off & (ubi->min_io_size - 1)) {
-		ubi_err("unaligned position");
+		ubi_err(ubi, "unaligned position");
 		return -EINVAL;
 	}
 
@@ -286,7 +288,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	/* We can write only in fractions of the minimum I/O unit */
 	if (count & (ubi->min_io_size - 1)) {
-		ubi_err("unaligned write length");
+		ubi_err(ubi, "unaligned write length");
 		return -EINVAL;
 	}
 
@@ -348,7 +350,7 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
 		err = ubi_more_leb_change_data(ubi, vol, buf, count);
 
 	if (err < 0) {
-		ubi_err("cannot accept more %zd bytes of data, error %d",
+		ubi_err(ubi, "cannot accept more %zd bytes of data, error %d",
 			count, err);
 		return err;
 	}
@@ -370,7 +372,7 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
 			return err;
 
 		if (err) {
-			ubi_warn("volume %d on UBI device %d is corrupted",
+			ubi_warn(ubi, "volume %d on UBI device %d is corrupted",
 				 vol->vol_id, ubi->ubi_num);
 			vol->corrupted = 1;
 		}
@@ -420,7 +422,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 			break;
 		}
 
-		err = get_exclusive(desc);
+		err = get_exclusive(ubi, desc);
 		if (err < 0)
 			break;
 
@@ -454,7 +456,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		    req.bytes < 0 || req.lnum >= vol->usable_leb_size)
 			break;
 
-		err = get_exclusive(desc);
+		err = get_exclusive(ubi, desc);
 		if (err < 0)
 			break;
 
@@ -640,7 +642,7 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 	return 0;
 
 bad:
-	ubi_err("bad volume creation request");
+	ubi_err(ubi, "bad volume creation request");
 	ubi_dump_mkvol_req(req);
 	return err;
 }
@@ -706,12 +708,12 @@ static int rename_volumes(struct ubi_device *ubi,
 	for (i = 0; i < req->count - 1; i++) {
 		for (n = i + 1; n < req->count; n++) {
 			if (req->ents[i].vol_id == req->ents[n].vol_id) {
-				ubi_err("duplicated volume id %d",
+				ubi_err(ubi, "duplicated volume id %d",
 					req->ents[i].vol_id);
 				return -EINVAL;
 			}
 			if (!strcmp(req->ents[i].name, req->ents[n].name)) {
-				ubi_err("duplicated volume name \"%s\"",
+				ubi_err(ubi, "duplicated volume name \"%s\"",
 					req->ents[i].name);
 				return -EINVAL;
 			}
@@ -734,7 +736,8 @@ static int rename_volumes(struct ubi_device *ubi,
 		re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_READWRITE);
 		if (IS_ERR(re->desc)) {
 			err = PTR_ERR(re->desc);
-			ubi_err("cannot open volume %d, error %d", vol_id, err);
+			ubi_err(ubi,
+				"cannot open volume %d, error %d", vol_id, err);
 			kfree(re);
 			goto out_free;
 		}
@@ -793,7 +796,7 @@ static int rename_volumes(struct ubi_device *ubi,
 				continue;
 
 			/* The volume exists but busy, or an error occurred */
-			ubi_err("cannot open volume \"%s\", error %d",
+			ubi_err(ubi, "cannot open volume \"%s\", error %d",
 				re->new_name, err);
 			goto out_free;
 		}
drivers/mtd/ubi/debug.c +5 -4
index 63cb1d7..9c5c89e 100644
@@ -43,12 +43,13 @@ void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
 		return;
 	err = mtd_read(ubi->mtd, addr, len, &read, buf);
 	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes",
+		ubi_err(ubi,
+		"err %d while reading %d bytes from PEB %d:%d, read %zd bytes",
 			err, len, pnum, offset, read);
 		goto out;
 	}
 
-	ubi_msg("dumping %d bytes of data from PEB %d, offset %d",
+	ubi_msg(ubi, "dumping %d bytes of data from PEB %d, offset %d",
 		len, pnum, offset);
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
 out:
@@ -238,7 +239,7 @@ int ubi_debugfs_init(void)
 	if (IS_ERR_OR_NULL(dfs_rootdir)) {
 		int err = dfs_rootdir ? -ENODEV : PTR_ERR(dfs_rootdir);
 
-		ubi_err("cannot create \"ubi\" debugfs directory, error %d\n",
+		pr_err("UBI error: cannot create \"ubi\" debugfs directory, error %d\n",
 			err);
 		return err;
 	}
@@ -433,7 +434,7 @@ out_remove:
 	debugfs_remove_recursive(d->dfs_dir);
 out:
 	err = dent ? PTR_ERR(dent) : -ENODEV;
-	ubi_err("cannot create \"%s\" debugfs file or directory, error %d\n",
+	ubi_err(ubi, "cannot create \"%s\" debugfs file or directory, error %d\n",
 		fname, err);
 	return err;
 }
drivers/mtd/ubi/eba.c +28 -26

201 lines not on this page · raw message

drivers/mtd/ubi/fastmap.c +64 -44

338 lines not on this page · raw message

drivers/mtd/ubi/io.c +104 -73

546 lines not on this page · raw message

drivers/mtd/ubi/kapi.c +3 -3
index 3aac1ac..f3bab66 100644
@@ -204,7 +204,7 @@ struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
 			return ERR_PTR(err);
 		}
 		if (err == 1) {
-			ubi_warn("volume %d on UBI device %d is corrupted",
+			ubi_warn(ubi, "volume %d on UBI device %d is corrupted",
 				 vol_id, ubi->ubi_num);
 			vol->corrupted = 1;
 		}
@@ -221,7 +221,7 @@ out_free:
 	kfree(desc);
 out_put_ubi:
 	ubi_put_device(ubi);
-	ubi_err("cannot open device %d, volume %d, error %d",
+	ubi_err(ubi, "cannot open device %d, volume %d, error %d",
 		ubi_num, vol_id, err);
 	return ERR_PTR(err);
 }
@@ -411,7 +411,7 @@ int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 
 	err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
 	if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
-		ubi_warn("mark volume %d as corrupted", vol_id);
+		ubi_warn(ubi, "mark volume %d as corrupted", vol_id);
 		vol->corrupted = 1;
 	}
 
drivers/mtd/ubi/misc.c +4 -2
index f913d70..4c2fccb 100644
@@ -111,7 +111,8 @@ void ubi_update_reserved(struct ubi_device *ubi)
 	ubi->avail_pebs -= need;
 	ubi->rsvd_pebs += need;
 	ubi->beb_rsvd_pebs += need;
-	ubi_msg("reserved more %d PEBs for bad PEB handling", need);
+	ubi_msg(ubi,
+		"reserved more %d PEBs for bad PEB handling", need);
 }
 
 /**
@@ -128,7 +129,8 @@ void ubi_calculate_reserved(struct ubi_device *ubi)
 	ubi->beb_rsvd_level = ubi->bad_peb_limit - ubi->bad_peb_count;
 	if (ubi->beb_rsvd_level < 0) {
 		ubi->beb_rsvd_level = 0;
-		ubi_warn("number of bad PEBs (%d) is above the expected limit (%d), not reserving any PEBs for bad PEB handling, will use available PEBs (if any)",
+		ubi_warn(ubi,
+			 "number of bad PEBs (%d) is above the expected limit (%d), not reserving any PEBs for bad PEB handling, will use available PEBs (if any)",
 			 ubi->bad_peb_count, ubi->bad_peb_limit);
 	}
 }
drivers/mtd/ubi/ubi.h +7 -6
index 7bf4163..00f8835 100644
@@ -50,13 +50,14 @@
 #define UBI_NAME_STR "ubi"
 
 /* Normal UBI messages */
-#define ubi_msg(fmt, ...) pr_notice("UBI: " fmt "\n", ##__VA_ARGS__)
+#define ubi_msg(ubi, fmt, ...) pr_notice("UBI-%d: %s:" fmt "\n", \
+				 ubi->ubi_num, __func__, ##__VA_ARGS__)
 /* UBI warning messages */
-#define ubi_warn(fmt, ...) pr_warn("UBI warning: %s: " fmt "\n",  \
-				   __func__, ##__VA_ARGS__)
+#define ubi_warn(ubi, fmt, ...) pr_warn("UBI-%d warning: %s: " fmt "\n",  \
+				   ubi->ubi_num, __func__, ##__VA_ARGS__)
 /* UBI error messages */
-#define ubi_err(fmt, ...) pr_err("UBI error: %s: " fmt "\n",      \
-				 __func__, ##__VA_ARGS__)
+#define ubi_err(ubi, fmt, ...) pr_err("UBI-%d error: %s: " fmt "\n",      \
+				 ubi->ubi_num, __func__, ##__VA_ARGS__)
 
 /* Background thread name pattern */
 #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd"
@@ -985,7 +986,7 @@ static inline void ubi_ro_mode(struct ubi_device *ubi)
 {
 	if (!ubi->ro_mode) {
 		ubi->ro_mode = 1;
-		ubi_warn("switch to read-only mode");
+		ubi_warn(ubi, "switch to read-only mode");
 		dump_stack();
 	}
 }
drivers/mtd/ubi/vmt.c +43 -33

236 lines not on this page · raw message

drivers/mtd/ubi/vtbl.c +31 -23

180 lines not on this page · raw message

drivers/mtd/ubi/wl.c +57 -32

259 lines not on this page · raw message

Signature · 2 lines
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of the Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw

Yes, I guess a single patch is indeed OK. I have few nit-picks, though.

drivers/mtd/ubi/attach.c static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, · line 867

Quoted 4 lines · Tanya Brokhman
drivers/mtd/ubi/attach.c +2 -1
-		ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+		ubi_err(ubi,
+		  "'ubi_io_read_ec_hdr()' returned unknown code %d", err);
 		return -EINVAL;

I think it is fine if the line is long in these cases, let's keep the message on the same line, this split does not contribute to better readability, quite the opposite, in my opinion.

One line:
ubi_err(ubi, "long line")

Multiple lines:
ubi_err(ubi, "long line,
parameters)

drivers/mtd/ubi/attach.c static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, · line 1008

Quoted 4 lines
drivers/mtd/ubi/attach.c +2 -1
-				ubi_msg("\"delete\" compatible internal volume %d:%d found, will remove it",
+				ubi_msg(ubi,
+				   "\"delete\" compatible internal volume %d:%d found, will remove it",
 					vol_id, lnum);

Ditto.

drivers/mtd/ubi/attach.c static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, · line 1019

Quoted 4 lines
drivers/mtd/ubi/attach.c +2 -1
-			ubi_msg("read-only compatible internal volume %d:%d found, switch to read-only mode",
+			ubi_msg(ubi,
+				"read-only compatible internal volume %d:%d found, switch to read-only mode",
 				vol_id, lnum);

Ditto. And so on, in many places.

drivers/mtd/ubi/attach.c static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai) · line 1670

Quoted 3 lines
drivers/mtd/ubi/attach.c +2 -1
-				ubi_err("bad compat %d", vidh->compat);
+				ubi_err(ubi,
+					"bad compat %d", vidh->compat);

And for consistency, places like this would be:

				ubi_err(ubi, bad compat %d",
				        vidh->compat);

drivers/mtd/ubi/attach.c static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai) · line 1681

Quoted 4 lines
drivers/mtd/ubi/attach.c +2 -1
 			if (av->used_ebs != be32_to_cpu(vidh->used_ebs)) {
-				ubi_err("bad used_ebs %d", av->used_ebs);
+				ubi_err(ubi,
+					"bad used_ebs %d", av->used_ebs);

Ditto for all the similar cases.

drivers/mtd/ubi/build.c static int autoresize(struct ubi_device *ubi, int vol_id) · line 853

Quoted 4 lines
drivers/mtd/ubi/build.c +2 -1
-	ubi_msg("volume %d (\"%s\") re-sized from %d to %d LEBs", vol_id,
+	ubi_msg(ubi, "volume %d (\"%s\") re-sized from %d to %d LEBs",
+		vol_id,
 		vol->name, old_reserved_pebs, vol->reserved_pebs);

Please, in cases like this, try to pack more arguments to the second line, and move those which do not fit there to the third line. So this would be like:

	ubi_msg(ubi, "volume %d (\"%s\") re-sized from %d to %d LEBs",
		vol_id,	vol->name, old_reserved_pebs,
		vol->reserved_pebs);
#2 lore raw
Quoted 12 lines · Artem Bityutskiy

Yes, I guess a single patch is indeed OK. I have few nit-picks, though.

drivers/mtd/ubi/attach.c static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, · line 867

Quoted 4 lines · Tanya Brokhman
drivers/mtd/ubi/attach.c +2 -1
-             ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+             ubi_err(ubi,
+               "'ubi_io_read_ec_hdr()' returned unknown code %d", err);
              return -EINVAL;

I think it is fine if the line is long in these cases, let's keep the message on the same line, this split does not contribute to better readability, quite the opposite, in my opinion.

Quoted 6 lines

One line:
ubi_err(ubi, "long line")

Multiple lines:
ubi_err(ubi, "long line,
parameters)

You should discuss that with checkpatch team, because ARAIR it will complain about "long line" with any other parameter in the same line.

#3 lore raw
Quoted 16 lines · Rafał Miłecki
Quoted 15 lines · Artem Bityutskiy

Yes, I guess a single patch is indeed OK. I have few nit-picks, though.

drivers/mtd/ubi/attach.c static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, · line 867

Quoted 4 lines · Tanya Brokhman
drivers/mtd/ubi/attach.c +2 -1
-             ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+             ubi_err(ubi,
+               "'ubi_io_read_ec_hdr()' returned unknown code %d", err);
              return -EINVAL;

I think it is fine if the line is long in these cases, let's keep the message on the same line, this split does not contribute to better readability, quite the opposite, in my opinion.

One line:
ubi_err(ubi, "long line")

Quoted 6 lines
Quoted 3 lines

Multiple lines:
ubi_err(ubi, "long line,
parameters)

You should discuss that with checkpatch team, because ARAIR it will complain about "long line" with any other parameter in the same line.

I respect checkpatch.pl, and uniformity / consistency, but in this particular case I put my maintainer hat on and say that for this kernel subsystem it is fine, because the maintainer will be more efficient in maintaining this code when the code is a bit mere readable for him.

Artem.

#4 lore raw
Quoted 21 lines · Artem Bityutskiy
Quoted 20 lines · Rafał Miłecki
Quoted 18 lines · Artem Bityutskiy

Yes, I guess a single patch is indeed OK. I have few nit-picks, though.

drivers/mtd/ubi/attach.c static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, · line 867

Quoted 4 lines · Tanya Brokhman
drivers/mtd/ubi/attach.c +2 -1
-             ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+             ubi_err(ubi,
+               "'ubi_io_read_ec_hdr()' returned unknown code %d", err);
              return -EINVAL;

I think it is fine if the line is long in these cases, let's keep the message on the same line, this split does not contribute to better readability, quite the opposite, in my opinion.

One line:
ubi_err(ubi, "long line")

Multiple lines:
ubi_err(ubi, "long line,
parameters)

Quoted 7 lines
Quoted 2 lines

You should discuss that with checkpatch team, because ARAIR it will complain about "long line" with any other parameter in the same line.

I respect checkpatch.pl, and uniformity / consistency, but in this particular case I put my maintainer hat on and say that for this kernel subsystem it is fine, because the maintainer will be more efficient in maintaining this code when the code is a bit mere readable for him.

I'm fine with that :) I think it may be even worth bringing to the checkpatch / CodingStyle to allow such lines.

Signature · 1 line
Rafał
#5 lore raw
In reply to Artem Bityutskiy
Quoted 4 lines · Artem Bityutskiy

I respect checkpatch.pl, and uniformity / consistency, but in this particular case I put my maintainer hat on and say that for this kernel subsystem it is fine, because the maintainer will be more efficient in maintaining this code when the code is a bit mere readable for him.

I believe checkpatch.pl flags long lines as a warning, not as an error, indicating some relaxation on the severity to start with.

/Ricard

Signature · 3 lines
Ricard Wolf Wanderlöf                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30