Stage shared dpll config
Subsystems (2)
v2 cover Stage shared dpll config
Version 2 of the series with the comments I got so far resolved.
Ander Conselvan de Oliveira (9):
drm/i915: Make *_crtc_mode_set work on new_config drm/i915: Convert shared dpll reference count to a crtc mask drm/i915: Move dpll crtc_mask and hw_state fields into separate struct drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs drm/i915: Covert HSW+ to choose DPLLS before disabling CRTCs drm/i915: Covert ILK-IVB to choose DPLLS before disabling CRTCs drm/i915: Covert remaining platforms to choose DPLLS before disabling
CRTCs
drm/i915: Remove crtc_mode_set() hook
drm/i915: Don't store current shared DPLL in the new pipe_config
drivers/gpu/drm/i915/i915_debugfs.c | 15 +- drivers/gpu/drm/i915/i915_drv.h | 14 +- drivers/gpu/drm/i915/intel_ddi.c | 36 +++- drivers/gpu/drm/i915/intel_display.c | 358 ++++++++++++++++++++++------------- 4 files changed, 272 insertions(+), 151 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/9 drm/i915: Make *_crtc_mode_set work on new_config
This shouldn't change the behavior of those functions, since they are called after the new_config is made effective and that points to the current config. In a follow up patch, the mode set sequence will be changed so this is called before disabling crtcs, and in that case those functions should work on the staged config.
--- drivers/gpu/drm/i915/intel_ddi.c | 32 ++++++-- drivers/gpu/drm/i915/intel_display.c | 153 ++++++++++++++++++++--------------- 2 files changed, 117 insertions(+), 68 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +27 -5
@@ -459,6 +459,28 @@ intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)return ret; } +static struct intel_encoder * +intel_ddi_get_crtc_new_encoder (struct intel_crtc *crtc) +{ +struct drm_device *dev = crtc->base.dev; +struct intel_encoder *intel_encoder, *ret =NULL ; +int num_encoders =0 ; + +for_each_intel_encoder (dev, intel_encoder) { +if (intel_encoder->new_crtc == crtc) { + ret = intel_encoder; + num_encoders++; + } + } + +if (num_encoders !=1 ) +WARN (1 ,"%d encoders on crtc for pipe %c\n" , num_encoders, +pipe_name (crtc->pipe)); + +BUG_ON (ret ==NULL ); +return ret; +} +#define LC_FREQ 2700#define LC_FREQ_2K U64_C(LC_FREQ * 2000)
@@ -792,7 +814,7 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,WRPLL_DIVIDER_REFERENCE (r2) |WRPLL_DIVIDER_FEEDBACK (n2) |WRPLL_DIVIDER_POST (p); - intel_crtc->config.dpll_hw_state.wrpll = val; + intel_crtc->new_config->dpll_hw_state.wrpll = val; pll =intel_get_shared_dpll (intel_crtc);if (pll ==NULL ) {
@@ -801,7 +823,7 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,return false; } - intel_crtc->config.ddi_pll_sel =PORT_CLK_SEL_WRPLL (pll->id); + intel_crtc->new_config->ddi_pll_sel =PORT_CLK_SEL_WRPLL (pll->id); }return true;
@@ -817,9 +839,9 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,*/ bool intel_ddi_pll_select (struct intel_crtc *intel_crtc) { -struct drm_crtc *crtc = &intel_crtc->base; -struct intel_encoder *intel_encoder =intel_ddi_get_crtc_encoder (crtc); -int clock = intel_crtc->config.port_clock; +struct intel_encoder *intel_encoder = +intel_ddi_get_crtc_new_encoder (intel_crtc); +int clock = intel_crtc->new_config->port_clock;intel_put_shared_dpll (intel_crtc);
drivers/gpu/drm/i915/intel_display.c +90 -63
380 lines not on this page · raw message
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 1/9] drm/i915: Make *_crtc_mode_set work on new_config
drivers/gpu/drm/i915/intel_ddi.c intel_ddi_get_crtc_encoder(struct drm_crtc *crtc) · line 478
Quoted 3 lines · Ander Conselvan de Oliveira
drivers/gpu/drm/i915/intel_ddi.c +3
-0+if (num_encoders !=1 ) +WARN (1 ,"%d encoders on crtc for pipe %c\n" , num_encoders, +pipe_name (crtc->pipe));
I've folded the check into the WARN here.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 2/9 drm/i915: Convert shared dpll reference count to a crtc mask
In reply to Ander Conselvan de OliveiraThis will be used in a follow up patch to properly release shared DPLLs without relying on the shared_dpll field in pipe_config.
v2: Fix white space error (Ville)
Use hweight32() (Ville)
--- drivers/gpu/drm/i915/i915_debugfs.c | 4 +-- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/intel_display.c | 50 +++++++++++++++++++----------------- 3 files changed, 30 insertions(+), 26 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +2 -2
@@ -2630,8 +2630,8 @@ static int i915_shared_dplls_info(struct seq_file *m, void *unused)struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];seq_printf (m,"DPLL%i: %s, id: %i\n" , i, pll->name, pll->id); -seq_printf (m," refcount: %i, active: %i, on: %s\n" , pll->refcount, - pll->active,yesno (pll->on)); +seq_printf (m," crtc_mask: 0x%08x, active: %d, on: %s\n" , + pll->crtc_mask, pll->active,yesno (pll->on));seq_printf (m," tracked hardware state:\n" );seq_printf (m," dpll: 0x%08x\n" , pll->hw_state.dpll);seq_printf (m," dpll_md: 0x%08x\n" , pll->hw_state.dpll_md);
drivers/gpu/drm/i915/i915_drv.h +1 -1
@@ -227,7 +227,7 @@ struct intel_dpll_hw_state { };struct intel_shared_dpll { -int refcount;/* count of number of CRTCs sharing this PLL */ +unsigned crtc_mask;/* mask of CRTCs sharing this PLL */ int active;/* count of number of active CRTCs (i.e. DPMS on) */ bool on;/* is the PLL actually active? Disabled during modeset */ const char *name;
drivers/gpu/drm/i915/intel_display.c +27 -23
136 lines not on this page · raw message
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 3/9 drm/i915: Move dpll crtc_mask and hw_state fields into separate struct
In reply to Ander Conselvan de OliveiraThe new struct will be used in a follow up patch to allow a current and a staged config to exist for the same shared DPLL.
v2: Rebase on by mask_to_refcount()->hweight32() change. (Damien)
--- drivers/gpu/drm/i915/i915_debugfs.c | 13 ++++---- drivers/gpu/drm/i915/i915_drv.h | 8 +++-- drivers/gpu/drm/i915/intel_ddi.c | 2 +- drivers/gpu/drm/i915/intel_display.c | 60 +++++++++++++++++++----------------- 4 files changed, 45 insertions(+), 38 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +7 -6
@@ -2631,13 +2631,14 @@ static int i915_shared_dplls_info(struct seq_file *m, void *unused)seq_printf (m,"DPLL%i: %s, id: %i\n" , i, pll->name, pll->id);seq_printf (m," crtc_mask: 0x%08x, active: %d, on: %s\n" , - pll->crtc_mask, pll->active,yesno (pll->on)); + pll->config.crtc_mask, pll->active,yesno (pll->on));seq_printf (m," tracked hardware state:\n" ); -seq_printf (m," dpll: 0x%08x\n" , pll->hw_state.dpll); -seq_printf (m," dpll_md: 0x%08x\n" , pll->hw_state.dpll_md); -seq_printf (m," fp0: 0x%08x\n" , pll->hw_state.fp0); -seq_printf (m," fp1: 0x%08x\n" , pll->hw_state.fp1); -seq_printf (m," wrpll: 0x%08x\n" , pll->hw_state.wrpll); +seq_printf (m," dpll: 0x%08x\n" , pll->config.hw_state.dpll); +seq_printf (m," dpll_md: 0x%08x\n" , + pll->config.hw_state.dpll_md); +seq_printf (m," fp0: 0x%08x\n" , pll->config.hw_state.fp0); +seq_printf (m," fp1: 0x%08x\n" , pll->config.hw_state.fp1); +seq_printf (m," wrpll: 0x%08x\n" , pll->config.hw_state.wrpll); }drm_modeset_unlock_all (dev);
drivers/gpu/drm/i915/i915_drv.h +6 -2
@@ -226,14 +226,18 @@ struct intel_dpll_hw_state {uint32_t wrpll; }; -struct intel_shared_dpll { +struct intel_shared_dpll_config {unsigned crtc_mask;/* mask of CRTCs sharing this PLL */ +struct intel_dpll_hw_state hw_state; +}; + +struct intel_shared_dpll { +struct intel_shared_dpll_config config;int active;/* count of number of active CRTCs (i.e. DPMS on) */ bool on;/* is the PLL actually active? Disabled during modeset */ const char *name;/* should match the index in the dev_priv->shared_dplls array */ enum intel_dpll_id id; -struct intel_dpll_hw_state hw_state;/* The mode_set hook is optional and should be used together with the * intel_prepare_shared_dpll function. */ void (*mode_set)(struct drm_i915_private *dev_priv,
drivers/gpu/drm/i915/intel_ddi.c +1 -1
@@ -1333,7 +1333,7 @@ int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)static void hsw_ddi_pll_enable (struct drm_i915_private *dev_priv,struct intel_shared_dpll *pll) { -I915_WRITE (WRPLL_CTL (pll->id), pll->hw_state.wrpll); +I915_WRITE (WRPLL_CTL (pll->id), pll->config.hw_state.wrpll);POSTING_READ (WRPLL_CTL (pll->id));udelay (20 ); }
drivers/gpu/drm/i915/intel_display.c +31 -29
170 lines not on this page · raw message
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 4/9 drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs
In reply to Ander Conselvan de OliveiraIt is possible for a mode set to fail if there aren't shared DPLLS that match the new configuration requirement or other errors in clock computation. If that step is executed after disabling crtcs, in the failure case the hardware configuration is changed and needs to be restored. Doing those things early will allow the mode set to fail before actually touching the hardware.
Follow up patches will convert different platforms to use the new infrastructure.
v2: Keep pll->new_config valid only during mode set (Ville)
Use kmemdup() in i915_shared_dpll_start_config() (Ville) Restore old pll config if something fails before commit (Ville) Don't set compute_clock hooks since dev_priv is kzalloc()'d (Ville)
--- drivers/gpu/drm/i915/i915_drv.h | 3 + drivers/gpu/drm/i915/intel_display.c | 142 ++++++++++++++++++++++++++++------- 2 files changed, 117 insertions(+), 28 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +3 -0
@@ -233,6 +233,8 @@ struct intel_shared_dpll_config {struct intel_shared_dpll {struct intel_shared_dpll_config config; +struct intel_shared_dpll_config *new_config; +int active;/* count of number of active CRTCs (i.e. DPMS on) */ bool on;/* is the PLL actually active? Disabled during modeset */ const char *name;
@@ -481,6 +483,7 @@ struct drm_i915_display_funcs { struct intel_crtc_config *);void (*get_plane_config)(struct intel_crtc *,struct intel_plane_config *); +int (*crtc_compute_clock)(struct intel_crtc *crtc);int (*crtc_mode_set)(struct intel_crtc *crtc,int x,int y,struct drm_framebuffer *old_fb);
drivers/gpu/drm/i915/intel_display.c +114 -28
226 lines not on this page · raw message
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 4/9] drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs
Quoted 10 lines · Ander Conselvan de Oliveira
It is possible for a mode set to fail if there aren't shared DPLLS that match the new configuration requirement or other errors in clock computation. If that step is executed after disabling crtcs, in the failure case the hardware configuration is changed and needs to be restored. Doing those things early will allow the mode set to fail before actually touching the hardware.
Follow up patches will convert different platforms to use the new infrastructure.
Quoted 6 lines
v2: Keep
pll->new_configvalid only during mode set (Ville)
Usekmemdup()ini915_shared_dpll_start_config()(Ville) Restore old pll config if something fails before commit (Ville) Don't setcompute_clockhooks sincedev_privis kzalloc()'d (Ville)Signed-off-by Ander Conselvan de Oliveira <[email protected]>
Ran into a blocking question with this one, merged thus far.
drivers/gpu/drm/i915/intel_display.c static int ironlake_crtc_mode_set(struct intel_crtc *crtc, · line 7460
Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2
-0@@ -7395,6 +7456,9 @@ static int ironlake_crtc_mode_set(struct intel_crtc *crtc,else crtc->new_config->dpll_hw_state.fp1 = fp; +if (intel_crtc_to_shared_dpll (crtc)) +intel_put_shared_dpll (crtc);
Don't we need the same fixup in intel_ddi_pll_select?
Quoted 13 lines
drivers/gpu/drm/i915/intel_display.c +6
-0+ pll =intel_get_shared_dpll (crtc);if (pll ==NULL ) { DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",@@ -10739,6 +10803,22 @@ static int __intel_set_mode(struct drm_crtc *crtc, prepare_pipes &= ~disable_pipes; } +if (dev_priv->display.crtc_compute_clock) { +unsigned clear_pipes = modeset_pipes | disable_pipes; + + ret =intel_shared_dpll_start_config (dev_priv, clear_pipes); +if (ret)
drivers/gpu/drm/i915/intel_display.c static int __intel_set_mode(struct drm_crtc *crtc, · line 10820
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +10
-0+ goto done; + +for_each_intel_crtc_masked (dev, modeset_pipes, intel_crtc) { + ret = dev_priv->display.crtc_compute_clock (intel_crtc); +if (ret) { +intel_shared_dpll_abort_config (dev_priv); + goto done; + } + } + }
Might be useful to shuffle this and the vlv-specific code above into a new intel_compute_global_config kind of helper function. But that can be done later on I think.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 4/9] drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs
Quoted 20 lines · Daniel Vetter
Quoted 10 lines · Ander Conselvan de Oliveira
It is possible for a mode set to fail if there aren't shared DPLLS that match the new configuration requirement or other errors in clock computation. If that step is executed after disabling crtcs, in the failure case the hardware configuration is changed and needs to be restored. Doing those things early will allow the mode set to fail before actually touching the hardware.
Follow up patches will convert different platforms to use the new infrastructure.
Quoted 6 lines
v2: Keep
pll->new_configvalid only during mode set (Ville)
Usekmemdup()ini915_shared_dpll_start_config()(Ville) Restore old pll config if something fails before commit (Ville) Don't setcompute_clockhooks sincedev_privis kzalloc()'d (Ville)Signed-off-by Ander Conselvan de Oliveira <[email protected]>Ran into a blocking question with this one, merged thus far.
Quoted 8 lines
drivers/gpu/drm/i915/intel_display.c static int ironlake_crtc_mode_set(struct intel_crtc *crtc, · line 7460
Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2
-0@@ -7395,6 +7456,9 @@ static int ironlake_crtc_mode_set(struct intel_crtc *crtc,else crtc->new_config->dpll_hw_state.fp1 = fp; +if (intel_crtc_to_shared_dpll (crtc)) +intel_put_shared_dpll (crtc);Don't we need the same fixup in
intel_ddi_pll_select?
Ok, I think I've figured it out - hsw does an unconditional put since a ddi pll might not be needed (for e.g. DP).
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 4/9] drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs
Quoted 25 lines · Daniel Vetter
Quoted 24 lines · Daniel Vetter
Quoted 10 lines · Ander Conselvan de Oliveira
It is possible for a mode set to fail if there aren't shared DPLLS that match the new configuration requirement or other errors in clock computation. If that step is executed after disabling crtcs, in the failure case the hardware configuration is changed and needs to be restored. Doing those things early will allow the mode set to fail before actually touching the hardware.
Follow up patches will convert different platforms to use the new infrastructure.
Quoted 6 lines
v2: Keep
pll->new_configvalid only during mode set (Ville)
Usekmemdup()ini915_shared_dpll_start_config()(Ville) Restore old pll config if something fails before commit (Ville) Don't setcompute_clockhooks sincedev_privis kzalloc()'d (Ville)Signed-off-by Ander Conselvan de Oliveira <[email protected]>Ran into a blocking question with this one, merged thus far.
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +0
-0@@ -7395,6 +7456,9 @@ static int ironlake_crtc_mode_set(struct intel_crtc *crtc,else crtc->new_config->dpll_hw_state.fp1 = fp;
Quoted 7 lines
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c static int ironlake_crtc_mode_set(struct intel_crtc *crtc, · line 7460
Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c +2
-0+if (intel_crtc_to_shared_dpll (crtc)) +intel_put_shared_dpll (crtc);Don't we need the same fixup in
intel_ddi_pll_select?Ok, I think I've figured it out - hsw does an unconditional put since a ddi pll might not be needed (for e.g. DP).
Yep, intel_ddi_pll_select() already had an unconditional call to intel_put_shared_dpll(), while the ironlake code relied on them being released in intel_get_shared_dpll(). After this patch the shared DPLLs should be release by the caller before getting a new one, but a later patch removes all those intel_put_shared_dpll() calls anyway.
Ander
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 5/9 drm/i915: Covert HSW+ to choose DPLLS before disabling CRTCs
In reply to Ander Conselvan de OliveiraUse the infrastructure added in a previous patch to choose shared DPLLs and calculate clocks before touching the hardware.
v2: Don't set mode_set hooks since dev_priv is kzalloc()'d (Ville)
--- drivers/gpu/drm/i915/intel_ddi.c | 2 -- drivers/gpu/drm/i915/intel_display.c | 7 +++---- 2 files changed, 3 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +0 -2
@@ -843,8 +843,6 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)intel_ddi_get_crtc_new_encoder (intel_crtc);int clock = intel_crtc->new_config->port_clock; -intel_put_shared_dpll (intel_crtc); -return hsw_ddi_pll_select (intel_crtc, intel_encoder, clock); }
drivers/gpu/drm/i915/intel_display.c +3 -4
@@ -7965,9 +7965,7 @@ static void haswell_modeset_global_resources(struct drm_device *dev)modeset_update_crtc_power_domains (dev); } -static int haswell_crtc_mode_set (struct intel_crtc *crtc, -int x,int y, -struct drm_framebuffer *fb) +static int haswell_crtc_compute_clock (struct intel_crtc *crtc) {if (!intel_ddi_pll_select (crtc))return -EINVAL ;
@@ -12458,7 +12456,8 @@ static void intel_init_display(struct drm_device *dev)if (HAS_DDI (dev)) { dev_priv->display.get_pipe_config = haswell_get_pipe_config; dev_priv->display.get_plane_config = ironlake_get_plane_config; - dev_priv->display.crtc_mode_set = haswell_crtc_mode_set; + dev_priv->display.crtc_compute_clock = + haswell_crtc_compute_clock; dev_priv->display.crtc_enable = haswell_crtc_enable; dev_priv->display.crtc_disable = haswell_crtc_disable; dev_priv->display.off = ironlake_crtc_off;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 6/9 drm/i915: Covert ILK-IVB to choose DPLLS before disabling CRTCs
In reply to Ander Conselvan de OliveiraUse the infrastructure added in a previous patch to choose shared DPLLs and calculate clocks before touching the hardware.
v2: Don't set mode_set hooks since dev_priv is kzalloc()'d (Ville)
--- drivers/gpu/drm/i915/intel_display.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/intel_display.c +4 -9
@@ -7408,9 +7408,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,return dpll |DPLL_VCO_ENABLE ; } -static int ironlake_crtc_mode_set (struct intel_crtc *crtc, -int x,int y, -struct drm_framebuffer *fb) +static int ironlake_crtc_compute_clock (struct intel_crtc *crtc) {struct drm_device *dev = crtc->base.dev;intel_clock_t clock, reduced_clock;
@@ -7456,17 +7454,13 @@ static int ironlake_crtc_mode_set(struct intel_crtc *crtc,else crtc->new_config->dpll_hw_state.fp1 = fp; -if (intel_crtc_to_shared_dpll (crtc)) -intel_put_shared_dpll (crtc); - pll =intel_get_shared_dpll (crtc);if (pll ==NULL ) {DRM_DEBUG_DRIVER ("failed to find PLL for pipe %c\n" ,pipe_name (crtc->pipe));return -EINVAL ; } - }else -intel_put_shared_dpll (crtc); + }if (is_lvds && has_reduced_clock && i915.powersave) crtc->lowfreq_avail = true;
@@ -12470,7 +12464,8 @@ static void intel_init_display(struct drm_device *dev) }else if (HAS_PCH_SPLIT (dev)) { dev_priv->display.get_pipe_config = ironlake_get_pipe_config; dev_priv->display.get_plane_config = ironlake_get_plane_config; - dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; + dev_priv->display.crtc_compute_clock = + ironlake_crtc_compute_clock; dev_priv->display.crtc_enable = ironlake_crtc_enable; dev_priv->display.crtc_disable = ironlake_crtc_disable; dev_priv->display.off = ironlake_crtc_off;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 7/9 drm/i915: Covert remaining platforms to choose DPLLS before disabling CRTCs
In reply to Ander Conselvan de OliveiraUse the infrastructure added in a previous patch to choose shared DPLLs and calculate clocks before touching the hardware.
v2: Don't set mode_set hooks since dev_priv is kzalloc()'d (Ville)
--- drivers/gpu/drm/i915/intel_display.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_display.c +3 -5
@@ -6385,9 +6385,7 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)POSTING_READ (PIPECONF (intel_crtc->pipe)); } -static int i9xx_crtc_mode_set (struct intel_crtc *crtc, -int x,int y, -struct drm_framebuffer *fb) +static int i9xx_crtc_compute_clock (struct intel_crtc *crtc) {struct drm_device *dev = crtc->base.dev;struct drm_i915_private *dev_priv = dev->dev_private;
@@ -12474,7 +12472,7 @@ static void intel_init_display(struct drm_device *dev) }else if (IS_VALLEYVIEW (dev)) { dev_priv->display.get_pipe_config = i9xx_get_pipe_config; dev_priv->display.get_plane_config = i9xx_get_plane_config; - dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; + dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock; dev_priv->display.crtc_enable = valleyview_crtc_enable; dev_priv->display.crtc_disable = i9xx_crtc_disable; dev_priv->display.off = i9xx_crtc_off;
@@ -12483,7 +12481,7 @@ static void intel_init_display(struct drm_device *dev) }else { dev_priv->display.get_pipe_config = i9xx_get_pipe_config; dev_priv->display.get_plane_config = i9xx_get_plane_config; - dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; + dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock; dev_priv->display.crtc_enable = i9xx_crtc_enable; dev_priv->display.crtc_disable = i9xx_crtc_disable; dev_priv->display.off = i9xx_crtc_off;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 8/9 drm/i915: Remove crtc_mode_set() hook
In reply to Ander Conselvan de OliveiraThere's no users left after the conversion to calculate clocks before disabling crtcs during mode set.
--- drivers/gpu/drm/i915/i915_drv.h | 3 --- drivers/gpu/drm/i915/intel_display.c | 7 ------- 2 files changed, 10 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +0 -3
@@ -484,9 +484,6 @@ struct drm_i915_display_funcs {void (*get_plane_config)(struct intel_crtc *,struct intel_plane_config *);int (*crtc_compute_clock)(struct intel_crtc *crtc); -int (*crtc_mode_set)(struct intel_crtc *crtc, -int x,int y, -struct drm_framebuffer *old_fb);void (*crtc_enable)(struct drm_crtc *crtc);void (*crtc_disable)(struct drm_crtc *crtc);void (*off)(struct drm_crtc *crtc);
drivers/gpu/drm/i915/intel_display.c +0 -7
@@ -10872,13 +10872,6 @@ static int __intel_set_mode(struct drm_crtc *crtc, crtc->primary->fb = fb; crtc->x = x; crtc->y = y; - -if (dev_priv->display.crtc_mode_set) { - ret = dev_priv->display.crtc_mode_set (intel_crtc, - x, y, fb); -if (ret) - goto done; - } }/* Now enable the clocks, plane, pipe, and connectors that we set up. */
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 9/9 drm/i915: Don't store current shared DPLL in the new pipe_config
In reply to Ander Conselvan de OliveiraNow that shared DPLLs configuration is staged, there's no need to track the current ones in the new pipe_config since those are released before making the new pipe_config effective.
--- drivers/gpu/drm/i915/intel_display.c | 8 -------- 1 file changed, 8 deletions(-)
drivers/gpu/drm/i915/intel_display.c +0 -8
@@ -5522,14 +5522,6 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,if (HAS_IPS (dev))hsw_compute_ips_config (crtc, pipe_config); -/* -* XXX: PCH/WRPLL clock sharing is done in ->mode_set if ->compute_clock is not -* set, so make sure the old clock survives for now. -*/ -if (dev_priv->display.crtc_compute_clock ==NULL && - (HAS_PCH_IBX (dev) ||HAS_PCH_CPT (dev) ||HAS_DDI (dev))) - pipe_config->shared_dpll = crtc->config.shared_dpll; -if (pipe_config->has_pch_encoder)return ironlake_fdi_compute_config (crtc, pipe_config);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 9/9] drm/i915: Don't store current shared DPLL
-------------------------------------Summary-------------------------------------
Platform: baseline_drm_intel_nightly_pass_rate->patch_applied_pass_rate
BYT: pass/total=271/271->271/271
PNV: pass/total=331/331->328/331
ILK: pass/total=271/271->271/271
IVB: pass/total=271/271->271/271
SNB: pass/total=271/271->271/271
HSW: pass/total=271/271->271/271
BDW: pass/total=368/368->366/368 -------------------------------------Detailed-------------------------------------test_platform: test_suite, test_case, result_with_drm_intel_nightly->result_with_patch_applied
PNV: Intel_gpu_tools, igt_gem_concurrent_blit_cpu-bcs-gpu-read-after-write-interruptible, PASS->DMESG_WARN
PNV: Intel_gpu_tools, igt_kms_setmode_invalid-clone-exclusive-crtc, PASS->DMESG_WARN
PNV: Intel_gpu_tools, igt_kms_setmode_invalid-clone-single-crtc, PASS->DMESG_WARN
BDW: Intel_gpu_tools, igt_gem_concurrent_blit_gtt-bcs-gpu-read-after-write-forked, PASS->TIMEOUT
BDW: Intel_gpu_tools, igt_gem_concurrent_blit_gttX-bcs-gpu-read-after-write-forked, PASS->TIMEOUT
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 13 lines · Ander Conselvan de Oliveira
Version 2 of the series with the comments I got so far resolved.
Ander Conselvan de Oliveira (9):
drm/i915: Make*_crtc_mode_setwork onnew_configdrm/i915: Convert shared dpll reference count to a crtc mask drm/i915: Move dpllcrtc_maskandhw_statefields into separate struct drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs drm/i915: Covert HSW+ to choose DPLLS before disabling CRTCs drm/i915: Covert ILK-IVB to choose DPLLS before disabling CRTCs drm/i915: Covert remaining platforms to choose DPLLS before disabling
CRTCs
drm/i915: Removecrtc_mode_set()hook
drm/i915: Don't store current shared DPLL in the newpipe_config
Ok, pulled in the entire series with some minor polished interspersed so that you can blame all bugs on me ;-)
Cheers, Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx