ARM: dts: sabrelite I2C and HDMI additions

This set of patches adds support for I2C2/3 busses and HDMI output for the SABRE Lite board.

The content was gratuitously copied from the following commits for the Nitrogen6X board made by Lucas Stach, Michael Olbrich, and Philipp Zabel at Pengutronix:

	43c3c00 - ARM: dts: nitrogen6x: add i2c2
	d653620 - ARM: dts: nitrogen6x: add hdmi
	1dffdd6 - ARM: dts: nitrogen6x: add i2c3

Eric Nelson (3):
ARM: dts: sabrelite: add i2c2
ARM: dts: sabrelite: add hdmi
ARM: dts: sabrelite: add i2c3

 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 33 ++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Re-sending to add Shawn Guo to the CC list.

1.9.1

---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

index 0a36129..37f53f3 100644
@@ -188,6 +188,13 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;

@@ -265,6 +272,13 @@
 			>;
 		};
 
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

1.9.1

---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

index 37f53f3..3bddc8f 100644
@@ -173,6 +173,11 @@
 	status = "okay";
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";

1.9.1