Skip to contentSkip to conversation

USB: serial: cp210x: Correcting IDs for production CEL MeshConnect USB Stick

PATCH In review Preston Fick 2 participants 2 messages Dec 22, 2014 – Dec 23, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 USB: serial: cp210x: Correcting IDs for production CEL MeshConnect USB Stick

---
 drivers/usb/serial/cp210x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/cp210x.c +1 -1
index 6c4eb3c..fb8d3fa 100644
@@ -120,7 +120,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
-	{ USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
+	{ USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
Signature · 1 line
1.9.1
maintainer
#1 lore raw

On Sun, Dec 21, 2014 at 11:33:39PM -0600, Preston Fick wrote:

Please add a proper commit message here describing why this is needed. Are there any devices with the original PID or was that just a typo?

Quoted 10 lines
---
 drivers/usb/serial/cp210x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/cp210x.c +0 -0
index 6c4eb3c..fb8d3fa 100644

drivers/usb/serial/cp210x.c static const struct usb_device_id id_table[] = { · line 126

Quoted 8 lines
drivers/usb/serial/cp210x.c +1 -1
@@ -120,7 +120,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
-	{ USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
+	{ USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */

Thanks,
Johan