USB: serial: cp210x: Correcting IDs for production CEL MeshConnect USB Stick
Subsystems (2)
PATCH 1/1 USB: serial: cp210x: Correcting IDs for production CEL MeshConnect USB Stick
Signed-off-by Preston Fick <[email protected]>
--- drivers/usb/serial/cp210x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/cp210x.c +1 -1
@@ -120,7 +120,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ - { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */ + { USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
Signature · 1 line
1.9.1
Johan Hovold
maintainerOn Sun, Dec 21, 2014 at 11:33:39PM -0600, Preston Fick wrote:
Please add a proper commit message here describing why this is needed. Are there any devices with the original PID or was that just a typo?
Quoted 10 lines
Signed-off-by Preston Fick <[email protected]>--- drivers/usb/serial/cp210x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/usb/serial/cp210x.c +0
-0
drivers/usb/serial/cp210x.c static const struct usb_device_id id_table[] = { · line 126
Quoted 8 lines
drivers/usb/serial/cp210x.c +1
-1@@ -120,7 +120,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ - { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */ + { USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
Thanks,
Johan