i8k patches
cover i8k patches
This patch series contains all i8k patches which were already sent to LKML and are not included in Greg's char-misc-testing branch yet (2015-01-12).
Guenter Roeck (2):
i8k: Rework error retries
i8k: Add support for Dell XPS 13
Pali Rohár (7):
i8k: Add support for temperature sensor labels
i8k: Register only temperature sensors which have labels
i8k: Return -ENODATA for invalid temperature
i8k: Make fan module parameters an unsigned
i8k: Autodetect fan RPM multiplier
i8k: Remove DMI config data for Latitude E6440 and E6540
i8k: Add support for fan labels
drivers/char/i8k.c | 316 ++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 217 insertions(+), 99 deletions(-)
Signature · 1 line
1.7.9.5
PATCH 1/9 i8k: Add support for temperature sensor labels
This patch adds labels for temperature sensors if SMM function with EAX register 0x11a3 reports it. This information was taken from DOS binary NBSVC.MDM.
--- drivers/char/i8k.c | 74 +++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 61 insertions(+), 13 deletions(-)
drivers/char/i8k.c +61 -13
@@ -42,6 +42,7 @@#define I8K_SMM_GET_FAN 0x00a3#define I8K_SMM_GET_SPEED 0x02a3#define I8K_SMM_GET_TEMP 0x10a3 +#define I8K_SMM_GET_TEMP_TYPE 0x11a3#define I8K_SMM_GET_DELL_SIG1 0xfea3#define I8K_SMM_GET_DELL_SIG2 0xffa3
@@ -288,6 +289,14 @@ static int i8k_set_fan(int fan, int speed)return i8k_smm (®s) ? :i8k_get_fan_status (fan); } +static int i8k_get_temp_type (int sensor) +{ +struct smm_regs regs = { .eax =I8K_SMM_GET_TEMP_TYPE , }; + + regs.ebx = sensor &0xff ; +return i8k_smm (®s) ? : regs.eax &0xff ; +} +/* * Read the cpu temperature. */
@@ -493,6 +502,29 @@ static int i8k_open_fs(struct inode *inode, struct file *file)* Hwmon interface */ +static ssize_t i8k_hwmon_show_temp_label (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +static const char *const labels[] = { +"CPU" , +"GPU" , +"SODIMM" , +"Other" , +"Ambient" , +"Other" , + }; +int index =to_sensor_dev_attr (devattr)->index; +int type; + + type =i8k_get_temp_type (index); +if (type <0 ) +return type; +if (type >=ARRAY_SIZE (labels)) + type =ARRAY_SIZE (labels) -1 ; +return sprintf (buf,"%s\n" , labels[type]); +} +static ssize_t i8k_hwmon_show_temp (struct device *dev,struct device_attribute *devattr,char *buf)
@@ -555,9 +587,17 @@ static ssize_t i8k_hwmon_set_pwm(struct device *dev, } static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL, + 0); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL, + 1); static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL, + 2); static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 3); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL, + 3); static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, i8k_hwmon_show_fan, NULL, I8K_FAN_LEFT); static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
@@ -569,31 +609,39 @@ static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,static struct attribute *i8k_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr,/* 0 */ - &sensor_dev_attr_temp2_input.dev_attr.attr,/* 1 */ - &sensor_dev_attr_temp3_input.dev_attr.attr,/* 2 */ - &sensor_dev_attr_temp4_input.dev_attr.attr,/* 3 */ - &sensor_dev_attr_fan1_input.dev_attr.attr,/* 4 */ - &sensor_dev_attr_pwm1.dev_attr.attr,/* 5 */ - &sensor_dev_attr_fan2_input.dev_attr.attr,/* 6 */ - &sensor_dev_attr_pwm2.dev_attr.attr,/* 7 */ + &sensor_dev_attr_temp1_label.dev_attr.attr,/* 1 */ + &sensor_dev_attr_temp2_input.dev_attr.attr,/* 2 */ + &sensor_dev_attr_temp2_label.dev_attr.attr,/* 3 */ + &sensor_dev_attr_temp3_input.dev_attr.attr,/* 4 */ + &sensor_dev_attr_temp3_label.dev_attr.attr,/* 5 */ + &sensor_dev_attr_temp4_input.dev_attr.attr,/* 6 */ + &sensor_dev_attr_temp4_label.dev_attr.attr,/* 7 */ + &sensor_dev_attr_fan1_input.dev_attr.attr,/* 8 */ + &sensor_dev_attr_pwm1.dev_attr.attr,/* 9 */ + &sensor_dev_attr_fan2_input.dev_attr.attr,/* 10 */ + &sensor_dev_attr_pwm2.dev_attr.attr,/* 11 */ NULL };static umode_t i8k_is_visible (struct kobject *kobj,struct attribute *attr,int index) { -if (index ==0 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1 )) +if (index >=0 && index <=1 && + !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1 ))return 0 ; -if (index ==1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP2 )) +if (index >=2 && index <=3 && + !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP2 ))return 0 ; -if (index ==2 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP3 )) +if (index >=4 && index <=5 && + !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP3 ))return 0 ; -if (index ==3 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP4 )) +if (index >=6 && index <=7 && + !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP4 ))return 0 ; -if (index >=4 && index <=5 && +if (index >=8 && index <=9 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_FAN1 ))return 0 ; -if (index >=6 && index <=7 && +if (index >=10 && index <=11 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_FAN2 ))return 0 ;
Signature · 1 line
1.7.9.5
PATCH 2/9 i8k: Register only temperature sensors which have labels
In reply to Pali RohárDetect presense of sensor by calling type function instead trying to read temperature value. Type function is working also for sensors which are temporary turned off (e.g on GPU which is turned off). Dell DOS binary NBSVC.MDM is doing similar checks, so we should do that too.
--- drivers/char/i8k.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/char/i8k.c +9 -9
@@ -660,19 +660,19 @@ static int __init i8k_init_hwmon(void) i8k_hwmon_flags =0 ; -/* CPU temperature attributes, if temperature reading is OK */ - err =i8k_get_temp (0 ); -if (err >=0 || err == -ERANGE ) +/* CPU temperature attributes, if temperature type is OK */ + err =i8k_get_temp_type (0 ); +if (err >=0 ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP1 ;/* check for additional temperature sensors */ - err =i8k_get_temp (1 ); -if (err >=0 || err == -ERANGE ) + err =i8k_get_temp_type (1 ); +if (err >=0 ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP2 ; - err =i8k_get_temp (2 ); -if (err >=0 || err == -ERANGE ) + err =i8k_get_temp_type (2 ); +if (err >=0 ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP3 ; - err =i8k_get_temp (3 ); -if (err >=0 || err == -ERANGE ) + err =i8k_get_temp_type (3 ); +if (err >=0 ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ;/* Left fan attributes, if left fan is present */
Signature · 1 line
1.7.9.5
PATCH 3/9 i8k: Return -ENODATA for invalid temperature
In reply to Pali RohárGuenter Roeck suggested to return -ENODATA instead -ERANGE or -EINVAL when BIOS reports invalid temperature value.
--- drivers/char/i8k.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/char/i8k.c +1 -3
@@ -331,7 +331,7 @@ static int i8k_get_temp(int sensor) prev[sensor] = temp; }if (temp >I8K_MAX_TEMP ) -return -ERANGE ; +return -ENODATA ;#endif return temp;
@@ -533,8 +533,6 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev,int temp; temp =i8k_get_temp (index); -if (temp == -ERANGE ) -return -EINVAL ;if (temp <0 )return temp;return sprintf (buf,"%d\n" , temp *1000 );
Signature · 1 line
1.7.9.5
PATCH 4/9 i8k: Rework error retries
In reply to Pali RohárFrom: Guenter Roeck <[email protected]>
Instead of returning a previous value if the SMM code returns an error when trying to read a temperature, retry once. If that fails again, return -ENODATA. Also return -ENODATA if an attempt is made to read the GPU temperature but the GPU is currently turned off.
Drop the I8K_TEMPERATURE_BUG definition and handle the related bug unconditionally.
--- drivers/char/i8k.c | 47 ++++++++++++++++++++++++----------------------- 1 file changed, 24 insertions(+), 23 deletions(-)
drivers/char/i8k.c +24 -23
@@ -5,7 +5,7 @@* * Hwmon integration: * Copyright (C) 2011 Jean Delvare <[email protected]> -* Copyright (C) 2013 Guenter Roeck <[email protected]> +* Copyright (C) 2013, 2014 Guenter Roeck <[email protected]> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the
@@ -20,6 +20,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/delay.h> #include <linux/module.h> #include <linux/types.h> #include <linux/init.h>
@@ -59,8 +60,6 @@#define I8K_POWER_AC 0x05#define I8K_POWER_BATTERY 0x01 -#define I8K_TEMPERATURE_BUG 1 -static DEFINE_MUTEX (i8k_mutex);static char bios_version[4 ];static struct device *i8k_hwmon_dev;
@@ -300,39 +299,41 @@ static int i8k_get_temp_type(int sensor)/* * Read the cpu temperature. */ -static int i8k_get_temp (int sensor) +static int _i8k_get_temp (int sensor) { -struct smm_regs regs = { .eax =I8K_SMM_GET_TEMP , }; -int rc; -int temp; +struct smm_regs regs = { + .eax =I8K_SMM_GET_TEMP , + .ebx = sensor &0xff , + }; -#ifdef I8K_TEMPERATURE_BUG -static int prev[4 ] = {I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 ,I8K_MAX_TEMP +1 }; -#endif - regs.ebx = sensor &0xff ; - rc =i8k_smm (®s); -if (rc <0 ) -return rc; +return i8k_smm (®s) ? : regs.eax &0xff ; +} - temp = regs.eax &0xff ; +static int i8k_get_temp (int sensor) +{ +int temp =_i8k_get_temp (sensor); -#ifdef I8K_TEMPERATURE_BUG /* * Sometimes the temperature sensor returns 0x99, which is out of range. -* In this case we return (once) the previous cached value. For example: +* In this case we retry (once) before returning an error. # 1003655137 00000058 00005a4b # 1003655138 00000099 00003a80 <--- 0x99 = 153 degrees # 1003655139 00000054 00005c52 */ -if (temp >I8K_MAX_TEMP ) { - temp = prev[sensor]; - prev[sensor] =I8K_MAX_TEMP +1 ; - }else { - prev[sensor] = temp; +if (temp ==0x99 ) { +msleep (100 ); + temp =_i8k_get_temp (sensor); } +/* +* Return -ENODATA for all invalid temperatures. +* +* Known instances are the 0x99 value as seen above as well as +* 0xc1 (193), which may be returned when trying to read the GPU +* temperature if the system supports a GPU and it is currently +* turned off. +*/ if (temp >I8K_MAX_TEMP )return -ENODATA ; -#endif return temp; }
Signature · 1 line
1.7.9.5
PATCH 5/9 i8k: Add support for Dell XPS 13
In reply to Pali RohárFrom: Guenter Roeck <[email protected]>
XPS 13 does not support turbo speed, so its initialization data matches that of XPS M140. Make XPS initialization data generic, and add support for XPS 13.
--- drivers/char/i8k.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/char/i8k.c +11 -3
@@ -705,7 +705,7 @@ enum i8k_configs {DELL_LATITUDE_E6540 ,DELL_PRECISION_490 ,DELL_STUDIO , - DELL_XPS_M140, + DELL_XPS, }; static const struct i8k_config_data i8k_config_data[] = {
@@ -725,7 +725,7 @@ static const struct i8k_config_data i8k_config_data[] = { .fan_mult = 1, .fan_max = I8K_FAN_HIGH, }, - [DELL_XPS_M140] = { + [DELL_XPS] = { .fan_mult = 1, .fan_max = I8K_FAN_HIGH, },
@@ -837,12 +837,20 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = { .driver_data = (void *)&i8k_config_data[DELL_STUDIO], }, { + .ident = "Dell XPS 13", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS13"), + }, + .driver_data = (void *)&i8k_config_data[DELL_XPS], + }, + { .ident = "Dell XPS M140", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"), }, - .driver_data = (void *)&i8k_config_data[DELL_XPS_M140], + .driver_data = (void *)&i8k_config_data[DELL_XPS], }, { } };
Signature · 1 line
1.7.9.5
PATCH 6/9 i8k: Make fan module parameters an unsigned
In reply to Pali RohárSetting negative fan multiplier or maximal fan speed does make any sense and can cause problems. So ensure that negative values will not be accepted.
--- drivers/char/i8k.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/char/i8k.c +9 -9
@@ -64,9 +64,9 @@ static DEFINE_MUTEX(i8k_mutex);static char bios_version[4 ];static struct device *i8k_hwmon_dev;static u32 i8k_hwmon_flags; -static int i8k_fan_mult; -static int i8k_pwm_mult; -static int i8k_fan_max =I8K_FAN_HIGH ; +static uint i8k_fan_mult; +static uint i8k_pwm_mult; +static uint i8k_fan_max =I8K_FAN_HIGH ;#define I8K_HWMON_HAVE_TEMP1 (1 << 0)#define I8K_HWMON_HAVE_TEMP2 (1 << 1)
@@ -95,12 +95,12 @@ static bool power_status;module_param (power_status, bool,0600 );MODULE_PARM_DESC (power_status,"Report power status in /proc/i8k" ); -static int fan_mult =I8K_FAN_MULT ; -module_param (fan_mult, int,0 ); +static uint fan_mult =I8K_FAN_MULT ; +module_param (fan_mult, uint,0 );MODULE_PARM_DESC (fan_mult,"Factor to multiply fan speed with" ); -static int fan_max =I8K_FAN_HIGH ; -module_param (fan_max, int,0 ); +static uint fan_max =I8K_FAN_HIGH ; +module_param (fan_max, uint,0 );MODULE_PARM_DESC (fan_max,"Maximum configurable fan speed" );static int i8k_open_fs (struct inode *inode,struct file *file);
@@ -696,8 +696,8 @@ static int __init i8k_init_hwmon(void) }struct i8k_config_data { -int fan_mult; -int fan_max; +uint fan_mult; +uint fan_max; };enum i8k_configs {
Signature · 1 line
1.7.9.5
PATCH 7/9 i8k: Autodetect fan RPM multiplier
In reply to Pali RohárThis patch adds new function i8k_get_fan_nominal_speed() for doing SMM call which will return nominal fan RPM for specified fan speed. It returns nominal RPM value at which fan operate when speed (0, 1, 2, 3) is set. It looks like RPM value is not accurate, but still provides very useful information.
New function i8k_get_fan_nominal_speed() is used for determinate if fan multiplier is 1 or 30. If function for maximal fan value success and returned RPM value too high (above 30000) then fan multiplier is set to 1. Otherwise multiplier is not changed and default value 30 is used.
--- drivers/char/i8k.c | 60 +++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 48 insertions(+), 12 deletions(-)
drivers/char/i8k.c +48 -12
@@ -6,6 +6,7 @@* Hwmon integration: * Copyright (C) 2011 Jean Delvare <[email protected]> * Copyright (C) 2013, 2014 Guenter Roeck <[email protected]> +* Copyright (C) 2014 Pali Rohár <[email protected]> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the
@@ -42,12 +43,14 @@#define I8K_SMM_SET_FAN 0x01a3#define I8K_SMM_GET_FAN 0x00a3#define I8K_SMM_GET_SPEED 0x02a3 +#define I8K_SMM_GET_NOM_SPEED 0x04a3#define I8K_SMM_GET_TEMP 0x10a3#define I8K_SMM_GET_TEMP_TYPE 0x11a3#define I8K_SMM_GET_DELL_SIG1 0xfea3#define I8K_SMM_GET_DELL_SIG2 0xffa3#define I8K_FAN_MULT 30 +#define I8K_FAN_MAX_RPM 30000#define I8K_MAX_TEMP 127#define I8K_FN_NONE 0x00
@@ -64,7 +67,7 @@ static DEFINE_MUTEX(i8k_mutex);static char bios_version[4 ];static struct device *i8k_hwmon_dev;static u32 i8k_hwmon_flags; -static uint i8k_fan_mult; +static uint i8k_fan_mult =I8K_FAN_MULT ;static uint i8k_pwm_mult;static uint i8k_fan_max =I8K_FAN_HIGH ;
@@ -95,13 +98,13 @@ static bool power_status;module_param (power_status, bool,0600 );MODULE_PARM_DESC (power_status,"Report power status in /proc/i8k" ); -static uint fan_mult =I8K_FAN_MULT ; +static uint fan_mult;module_param (fan_mult, uint,0 ); -MODULE_PARM_DESC (fan_mult,"Factor to multiply fan speed with" ); +MODULE_PARM_DESC (fan_mult,"Factor to multiply fan speed with (default: autodetect)" ); -static uint fan_max =I8K_FAN_HIGH ; +static uint fan_max;module_param (fan_max, uint,0 ); -MODULE_PARM_DESC (fan_max,"Maximum configurable fan speed" ); +MODULE_PARM_DESC (fan_max,"Maximum configurable fan speed (default: autodetect)" );static int i8k_open_fs (struct inode *inode,struct file *file);static long i8k_ioctl (struct file *,unsigned int ,unsigned long );
@@ -276,6 +279,17 @@ static int i8k_get_fan_speed(int fan) }/* +* Read the fan nominal rpm for specific fan speed. +*/ +static int i8k_get_fan_nominal_speed (int fan,int speed) +{ +struct smm_regs regs = { .eax =I8K_SMM_GET_NOM_SPEED , }; + + regs.ebx = (fan &0xff ) | (speed <<8 ); +return i8k_smm (®s) ? : (regs.eax &0xffff ) * i8k_fan_mult; +} + +/* * Set the fan speed (off, low, high). Returns the new fan status. */ static int i8k_set_fan (int fan,int speed)
@@ -863,6 +877,7 @@ MODULE_DEVICE_TABLE(dmi, i8k_dmi_table);static int __init i8k_probe (void ) {const struct dmi_system_id *id; +int fan, ret;/* * Get DMI information
@@ -891,19 +906,40 @@ static int __init i8k_probe(void)return -ENODEV ; } - i8k_fan_mult = fan_mult; - i8k_fan_max = fan_max ? :I8K_FAN_HIGH ;/* Must not be 0 */ +/* +* Set fan multiplier and maximal fan speed from dmi config +* Values specified in module parameters override values from dmi +*/ id =dmi_first_match (i8k_dmi_table);if (id && id->driver_data) {const struct i8k_config_data *conf = id->driver_data; - -if (fan_mult ==I8K_FAN_MULT && conf->fan_mult) - i8k_fan_mult = conf->fan_mult; -if (fan_max ==I8K_FAN_HIGH && conf->fan_max) - i8k_fan_max = conf->fan_max; +if (!fan_mult && conf->fan_mult) + fan_mult = conf->fan_mult; +if (!fan_max && conf->fan_max) + fan_max = conf->fan_max; } + + i8k_fan_max = fan_max ? :I8K_FAN_HIGH ;/* Must not be 0 */ i8k_pwm_mult =DIV_ROUND_UP (255 , i8k_fan_max); +if (!fan_mult) { +/* +* Autodetect fan multiplier based on nominal rpm +* If fan reports rpm value too high then set multiplier to 1 +*/ +for (fan =0 ; fan <2 ; ++fan) { + ret =i8k_get_fan_nominal_speed (fan, i8k_fan_max); +if (ret <0 ) +continue ; +if (ret >I8K_FAN_MAX_RPM ) + i8k_fan_mult =1 ; +break ; + } + }else { +/* Fan multiplier was specified in module param or in dmi */ + i8k_fan_mult = fan_mult; + } +return 0 ; }
Signature · 1 line
1.7.9.5
Re: [PATCH 7/9] i8k: Autodetect fan RPM multiplier
Quoted 5 lines · Pali Rohár
This patch adds new function
i8k_get_fan_nominal_speed()for doing SMM call which will return nominal fan RPM for specified fan speed. It returns nominal RPM value at which fan operate when speed (0, 1, 2, 3) is set. It looks like RPM value is not accurate, but still provides very useful information.
Quoted 8 lines
New function
i8k_get_fan_nominal_speed()is used for determinate if fan multiplier is 1 or 30. If function for maximal fan value success and returned RPM value too high (above 30000) then fan multiplier is set to 1. Otherwise multiplier is not changed and default value 30 is used.Signed-off-by Pali Rohár <[email protected]>Tested-by Pali Rohár <[email protected]>Tested-by Gabriele Mazzotta <[email protected]>
Greg,
with this the entire series is ready to go.
Thanks, and sorry for the long delay on my side.
Guenter
Greg Kroah-Hartman
maintainerRe: [PATCH 7/9] i8k: Autodetect fan RPM multiplier
Quoted 15 lines · Guenter Roeck
Quoted 5 lines · Pali Rohár
This patch adds new function
i8k_get_fan_nominal_speed()for doing SMM call which will return nominal fan RPM for specified fan speed. It returns nominal RPM value at which fan operate when speed (0, 1, 2, 3) is set. It looks like RPM value is not accurate, but still provides very useful information.Quoted 8 lines
New function
i8k_get_fan_nominal_speed()is used for determinate if fan multiplier is 1 or 30. If function for maximal fan value success and returned RPM value too high (above 30000) then fan multiplier is set to 1. Otherwise multiplier is not changed and default value 30 is used.Signed-off-by Pali Rohár <[email protected]>Tested-by Pali Rohár <[email protected]>Tested-by Gabriele Mazzotta <[email protected]>
Quoted 5 lines
Reviewed-by Guenter Roeck <[email protected]>Greg,
with this the entire series is ready to go.
What about patch 9? It doesn't have your ack.
thanks,
greg k-h
Re: [PATCH 7/9] i8k: Autodetect fan RPM multiplier
Quoted 16 lines · Greg Kroah-Hartman
Quoted 15 lines · Guenter Roeck
Quoted 13 lines · Pali Rohár
This patch adds new function
i8k_get_fan_nominal_speed()for doing SMM call which will return nominal fan RPM for specified fan speed. It returns nominal RPM value at which fan operate when speed (0, 1, 2, 3) is set. It looks like RPM value is not accurate, but still provides very useful information.New function
i8k_get_fan_nominal_speed()is used for determinate if fan multiplier is 1 or 30. If function for maximal fan value success and returned RPM value too high (above 30000) then fan multiplier is set to 1. Otherwise multiplier is not changed and default value 30 is used.Signed-off-by Pali Rohár <[email protected]>Tested-by Pali Rohár <[email protected]>Tested-by Gabriele Mazzotta <[email protected]>
Quoted 8 lines
Quoted 5 lines
Reviewed-by Guenter Roeck <[email protected]>Greg,
with this the entire series is ready to go.
What about patch 9? It doesn't have your ack.
I thought I sent a Reviewed-by: for patch 9 prior to sending this mail. Must be getting old. I just re-sent it.
Guenter
PATCH 8/9 i8k: Remove DMI config data for Latitude E6440 and E6540
In reply to Pali RohárBoth Dell Latitude machines were tested with new fan autodetection code and they are working fine. We already have DMI_MATCH data for generic Latitude machines which match also E6440 and E6540 models. So we do not need to maintain DMI data for those specific machines anymore.
--- drivers/char/i8k.c | 21 --------------------- 1 file changed, 21 deletions(-)
drivers/char/i8k.c +0 -21
@@ -716,7 +716,6 @@ struct i8k_config_data {enum i8k_configs {DELL_LATITUDE_D520 , -DELL_LATITUDE_E6540 ,DELL_PRECISION_490 ,DELL_STUDIO ,DELL_XPS ,
@@ -727,10 +726,6 @@ static const struct i8k_config_data i8k_config_data[] = { .fan_mult = 1, .fan_max = I8K_FAN_TURBO, }, - [DELL_LATITUDE_E6540] = { - .fan_mult = 1, - .fan_max = I8K_FAN_HIGH, - }, [DELL_PRECISION_490] = { .fan_mult = 1, .fan_max = I8K_FAN_TURBO,
@@ -776,22 +771,6 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = { .driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520], }, { - .ident = "Dell Latitude E6440", - .matches = { -DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6440"), - }, - .driver_data = (void *)&i8k_config_data[DELL_LATITUDE_E6540], - }, - { - .ident ="Dell Latitude E6540" , - .matches = { -DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6540"), - }, - .driver_data = (void *)&i8k_config_data[DELL_LATITUDE_E6540], - }, - { .ident = "Dell Latitude 2", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
Signature · 1 line
1.7.9.5
PATCH 9/9 i8k: Add support for fan labels
In reply to Pali RohárThis patch adds labels support for fans if SMM function with EAX register 0x03a3 reports it. This information was taken from DOS binary NBSVC.MDM.
Additionally this patch change detection of fan presece. Instead reading fan status now detection is based on new label SMM function. Dell DOS binary NBSVC.MDM is doing similar checks, so we should do that too.
This patch also remove I8K_FAN_LEFT and I8K_FAN_RIGHT usage from hwmon driver part because that names does not make sense anymore. So numeric constants are used instead. Original /proc/i8k ioctl part was not changed for compatibility reasons.
--- drivers/char/i8k.c | 76 ++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 62 insertions(+), 14 deletions(-)
drivers/char/i8k.c +62 -14
@@ -43,6 +43,7 @@#define I8K_SMM_SET_FAN 0x01a3#define I8K_SMM_GET_FAN 0x00a3#define I8K_SMM_GET_SPEED 0x02a3 +#define I8K_SMM_GET_FAN_TYPE 0x03a3#define I8K_SMM_GET_NOM_SPEED 0x04a3#define I8K_SMM_GET_TEMP 0x10a3#define I8K_SMM_GET_TEMP_TYPE 0x11a3
@@ -279,6 +280,17 @@ static int i8k_get_fan_speed(int fan) }/* +* Read the fan type. +*/ +static int i8k_get_fan_type (int fan) +{ +struct smm_regs regs = { .eax =I8K_SMM_GET_FAN_TYPE , }; + + regs.ebx = fan &0xff ; +return i8k_smm (®s) ? : regs.eax &0xff ; +} + +/* * Read the fan nominal rpm for specific fan speed. */ static int i8k_get_fan_nominal_speed (int fan,int speed)
@@ -553,6 +565,37 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev,return sprintf (buf,"%d\n" , temp *1000 ); } +static ssize_t i8k_hwmon_show_fan_label (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +static const char *const labels[] = { +"Processor Fan" , +"Motherboard Fan" , +"Video Fan" , +"Power Supply Fan" , +"Chipset Fan" , +"Other Fan" , + }; +int index =to_sensor_dev_attr (devattr)->index; +bool dock = false; +int type; + + type =i8k_get_fan_type (index); +if (type <0 ) +return type; + +if (type &0x10 ) { + dock = true; + type &=0x0F ; + } + +if (type >=ARRAY_SIZE (labels)) + type = (ARRAY_SIZE (labels) -1 ); + +return sprintf (buf,"%s%s\n" , (dock ?"Docking " :"" ), labels[type]); +} +static ssize_t i8k_hwmon_show_fan (struct device *dev,struct device_attribute *devattr,char *buf)
@@ -611,14 +654,17 @@ static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL, static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 3); static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL, 3); -static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, i8k_hwmon_show_fan, NULL, - I8K_FAN_LEFT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, i8k_hwmon_show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, i8k_hwmon_show_fan_label, NULL, + 0); static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm, - i8k_hwmon_set_pwm, I8K_FAN_LEFT); + i8k_hwmon_set_pwm, 0); static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, i8k_hwmon_show_fan, NULL, - I8K_FAN_RIGHT); + 1); +static SENSOR_DEVICE_ATTR(fan2_label, S_IRUGO, i8k_hwmon_show_fan_label, NULL, + 1); static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm, - i8k_hwmon_set_pwm, I8K_FAN_RIGHT); + i8k_hwmon_set_pwm, 1);static struct attribute *i8k_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr,/* 0 */
@@ -630,9 +676,11 @@ static struct attribute *i8k_attrs[] = { &sensor_dev_attr_temp4_input.dev_attr.attr,/* 6 */ &sensor_dev_attr_temp4_label.dev_attr.attr,/* 7 */ &sensor_dev_attr_fan1_input.dev_attr.attr,/* 8 */ - &sensor_dev_attr_pwm1.dev_attr.attr,/* 9 */ - &sensor_dev_attr_fan2_input.dev_attr.attr,/* 10 */ - &sensor_dev_attr_pwm2.dev_attr.attr,/* 11 */ + &sensor_dev_attr_fan1_label.dev_attr.attr,/* 9 */ + &sensor_dev_attr_pwm1.dev_attr.attr,/* 10 */ + &sensor_dev_attr_fan2_input.dev_attr.attr,/* 11 */ + &sensor_dev_attr_fan2_label.dev_attr.attr,/* 12 */ + &sensor_dev_attr_pwm2.dev_attr.attr,/* 13 */ NULL };
@@ -651,10 +699,10 @@ static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,if (index >=6 && index <=7 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP4 ))return 0 ; -if (index >=8 && index <=9 && +if (index >=8 && index <=10 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_FAN1 ))return 0 ; -if (index >=10 && index <=11 && +if (index >=11 && index <=13 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_FAN2 ))return 0 ;
@@ -688,13 +736,13 @@ static int __init i8k_init_hwmon(void)if (err >=0 ) i8k_hwmon_flags |=I8K_HWMON_HAVE_TEMP4 ; -/* Left fan attributes, if left fan is present */ - err =i8k_get_fan_status (I8K_FAN_LEFT ); +/* First fan attributes, if fan type is OK */ + err =i8k_get_fan_type (0 );if (err >=0 ) i8k_hwmon_flags |=I8K_HWMON_HAVE_FAN1 ; -/* Right fan attributes, if right fan is present */ - err =i8k_get_fan_status (I8K_FAN_RIGHT ); +/* Second fan attributes, if fan type is OK */ + err =i8k_get_fan_type (1 );if (err >=0 ) i8k_hwmon_flags |=I8K_HWMON_HAVE_FAN2 ;
Signature · 1 line
1.7.9.5
Re: [PATCH 9/9] i8k: Add support for fan labels
Quoted 7 lines · Pali Rohár
This patch adds labels support for fans if SMM function with EAX register
0x03a3reports it. This information was taken from DOS binary NBSVC.MDM.Additionally this patch change detection of fan presece. Instead reading fan status now detection is based on new label SMM function. Dell DOS binary NBSVC.MDM is doing similar checks, so we should do that too.
Quoted 6 lines
This patch also remove
I8K_FAN_LEFTandI8K_FAN_RIGHTusage from hwmon driver part because that names does not make sense anymore. So numeric constants are used instead. Original/proc/i8kioctl part was not changed for compatibility reasons.Signed-off-by Pali Rohár <[email protected]>