x86/arm64: add xenconfig
Subsystems (5)
v3 cover x86/arm64: add xenconfig
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the CONFIG_TCG_XEN=m from the general config. To be clear the changes from the v2 series are below.
Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Signature · 1 line
2.1.1
arch/x86/configs/xen.config +3 -0
@@ -5,3 +5,6 @@ CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_PVH=y CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config +0 -4
@@ -1,8 +1,6 @@ # generic config CONFIG_XEN=y CONFIG_XEN_DOM0=y -CONFIG_PCI_XEN=y -CONFIG_XEN_PCIDEV_FRONTEND=m CONFIG_XEN_BLKDEV_FRONTEND=m CONFIG_XEN_BLKDEV_BACKEND=m CONFIG_XEN_NETDEV_FRONTEND=m
@@ -10,7 +8,6 @@ CONFIG_XEN_NETDEV_BACKEND=m CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y -CONFIG_TCG_XEN=m CONFIG_XEN_WDT=m CONFIG_XEN_FBDEV_FRONTEND=y CONFIG_XEN_BALLOON=y
@@ -27,4 +24,3 @@ CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_SWIOTLB_XEN=y CONFIG_XEN_PCIDEV_BACKEND=m CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_ACPI_PROCESSOR=m
PATCH v3 1/2 x86, platform, xen, kconfig: clarify kvmconfig is for kvm
From: "Luis R. Rodriguez" <[email protected]>
We'll be adding options for xen as well.
--- scripts/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
@@ -141,7 +141,7 @@ help: @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - @echo ' kvmconfig - Enable additional options for guest kernel support' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.1.1
PATCH v3 1/2 x86, platform, xen, kconfig: clarify kvmconfig is for kvm
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
We'll be adding options for xen as well.
--- scripts/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
@@ -141,7 +141,7 @@ help: @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - @echo ' kvmconfig - Enable additional options for guest kernel support' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.1.1
PATCH v3 2/2 x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
--- arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 41 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +10 -0
@@ -0,0 +1,10 @@ +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +26 -0
@@ -0,0 +1,26 @@ +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.1.1
Re: [PATCH v3 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 25 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Cc Josh Triplett <[email protected]>Cc Borislav Petkov <[email protected]>Cc Pekka Enberg <[email protected]>Cc David Rientjes <[email protected]>Cc Michal Marek <[email protected]>Cc Randy Dunlap <[email protected]>
Quoted 8 lines
Cc David Vrabel <[email protected]>Cc Ian Campbell <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Acked-by Julien Grall <[email protected]>Reviewed-by Josh Triplett <[email protected]>Signed-off-by Luis R. Rodriguez <[email protected]>
Quoted 81 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 41 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configarch/x86/configs/xen.config new file +10
-0@@ -0,0 +1,10 @@ +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=mkernel/configs/xen.config new file +26
-0@@ -0,0 +1,26 @@ +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=mscripts/kconfig/Makefile +5
-0@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuffSignature · 1 line
2.1.1
Re: [PATCH v3 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezQuoted 25 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Cc Josh Triplett <[email protected]>Cc Borislav Petkov <[email protected]>Cc Pekka Enberg <[email protected]>Cc David Rientjes <[email protected]>Cc Michal Marek <[email protected]>Cc Randy Dunlap <[email protected]>
Quoted 8 lines
Cc David Vrabel <[email protected]>Cc Ian Campbell <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Acked-by Julien Grall <[email protected]>Reviewed-by Josh Triplett <[email protected]>Signed-off-by Luis R. Rodriguez <[email protected]>
Quoted 81 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 41 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configarch/x86/configs/xen.config new file +10
-0@@ -0,0 +1,10 @@ +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=mkernel/configs/xen.config new file +26
-0@@ -0,0 +1,26 @@ +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=mscripts/kconfig/Makefile +5
-0@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuffSignature · 1 line
2.1.1
PATCH v3 2/2 x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
--- arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 41 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +10 -0
@@ -0,0 +1,10 @@ +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +26 -0
@@ -0,0 +1,26 @@ +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.1.1
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Who could these changes go through?
Luis
Quoted 12 lines · Luis R. Rodriguez
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 8 lines
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configWho could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Luis
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Luis
[Added Michal. Removed Yann.]
Quoted 22 lines · Luis R. Rodriguez
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
Paul Bolle
Quoted 30 lines · Paul Bolle
[Added Michal. Removed Yann.]
Quoted 27 lines · Luis R. Rodriguez
Quoted 26 lines · Luis R. Rodriguez
Quoted 24 lines · Stefano Stabellini
Quoted 12 lines · Luis R. Rodriguez
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperQuoted 8 lines
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configWho could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
I did not see this. Can you please bounce me the original series?
Thanks,
Michal
Quoted 31 lines · Michal Marek
Quoted 30 lines · Paul Bolle
[Added Michal. Removed Yann.]
Quoted 27 lines · Luis R. Rodriguez
Quoted 26 lines · Luis R. Rodriguez
Quoted 24 lines · Stefano Stabellini
Quoted 12 lines · Luis R. Rodriguez
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperQuoted 8 lines
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configWho could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them, and sorry for not adding you on the original To list, in no way did I consider this had to go through you as it didn't include any major kconfig changes and though this was rather more of an x86 / xen tree thing.
Luis
Dne 30.1.2015 v 19:25 Luis R. Rodriguez napsal(a):
Quoted 34 lines · Michal Marek
Quoted 33 lines · Paul Bolle
Quoted 32 lines
[Added Michal. Removed Yann.]
Quoted 29 lines · Luis R. Rodriguez
Quoted 27 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configQuoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them
I got them, sorry for the delay. You can add Acked-by: Michal Marek <[email protected]> if you want.
Michal
Quoted 40 lines · Michal Marek
Dne 30.1.2015 v 19:25 Luis R. Rodriguez napsal(a):
Quoted 39 lines · Michal Marek
Quoted 38 lines · Paul Bolle
Quoted 36 lines
[Added Michal. Removed Yann.]
Quoted 22 lines · Luis R. Rodriguez
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configQuoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them
I got them, sorry for the delay. You can add Acked-by: Michal Marek <[email protected]> if you want.
Thanks Michal, what tree should this go through though?
Luis
Quoted 41 lines · Luis R. Rodriguez
Quoted 40 lines · Michal Marek
Dne 30.1.2015 v 19:25 Luis R. Rodriguez napsal(a):
Quoted 39 lines · Michal Marek
Quoted 38 lines · Paul Bolle
Quoted 36 lines
[Added Michal. Removed Yann.]
Quoted 22 lines · Luis R. Rodriguez
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configQuoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them
I got them, sorry for the delay. You can add Acked-by: Michal Marek <[email protected]> if you want.
Thanks Michal, what tree should this go through though?
David should this go through your tree? Can anyone provide pointers?
Luis
Quoted 2 lines · Luis R. Rodriguez
David should this go through your tree? Can anyone provide pointers?
I think it should probably go through Michal's tree?
It would help to have an ack from at least one of the x86 maintainers, so maybe add Ingo Molnar <[email protected]> and Thomas Gleixner <[email protected]>.
We need an update to the MAINTAINERS file if "Yann E. MORIN" <[email protected]> isn't the active Kconfig maintainer anymore.
If all else fails, I'd try to ask Andrew Morton
<[email protected]> to route it.
Quoted 2 lines · David Rientjes
We need an update to the
MAINTAINERSfile if "Yann E. MORIN" <[email protected]> isn't the activeKconfigmaintainer anymore.
Yes, we do. Michal, what update would you suggest?
Thanks,
Paul Bolle
Quoted 5 lines · Paul Bolle
Quoted 2 lines · David Rientjes
We need an update to the
MAINTAINERSfile if "Yann E. MORIN" <[email protected]> isn't the activeKconfigmaintainer anymore.Yes, we do. Michal, what update would you suggest?
I'll revert the patch that added Yann. That is, change the contact back to me and the status to "Odd fixes".
Michal
Quoted 9 lines · Michal Marek
Quoted 5 lines · David Rientjes
Quoted 2 lines
We need an update to the
MAINTAINERSfile if "Yann E. MORIN" <[email protected]> isn't the activeKconfigmaintainer anymore.Yes, we do. Michal, what update would you suggest?
I'll revert the patch that added Yann. That is, change the contact back to me and the status to "Odd fixes".
Woohoo, so does this mean that Luis's series will finally be merged into a
tree somewhere? It's been a lengthy wait to try to get this merged.
Quoted 2 lines · David Rientjes
Woohoo, so does this mean that Luis's series will finally be merged into a
tree somewhere? It's been a lengthy wait to try to get this merged.
David Rientjes (as I'm also Cc'ing David Vrabel),
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Luis
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Quoted 10 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Quoted 4 lines
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Ingo (x86 guys) mentioned in one of his emails that he glosses over emails if they say 'xen'.
Perhaps you need to change the title to be more catchy?
Quoted 5 lines
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel
Quoted 11 lines · Konrad Rzeszutek Wilk
Quoted 10 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Quoted 7 lines
Quoted 4 lines
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Ingo (x86 guys) mentioned in one of his emails that he glosses over emails if they say 'xen'.
Then this should be able to go through David Vrabel no, as he does care.
Quoted 1 line
Perhaps you need to change the title to be more catchy?
If folks don't want to deal with Xen patches it should be fine, but we do need a route upstream, this seems to make sense to go through David Vrabel in the future no?
Luis
Quoted 18 lines · Luis R. Rodriguez
Quoted 16 lines · Konrad Rzeszutek Wilk
Quoted 14 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Quoted 4 lines
Quoted 2 lines
Ingo (x86 guys) mentioned in one of his emails that he glosses over emails if they say 'xen'.
Then this should be able to go through David Vrabel no, as he does care.
:-)
Quoted 6 lines
Quoted 2 lines
Perhaps you need to change the title to be more catchy?
If folks don't want to deal with Xen patches it should be fine, but we do need a route upstream, this seems to make sense to go through David Vrabel in the future no?
Yes, any of the Xen maintainers (me, David, or Boris).
Quoted 2 lines
Luis
Quoted 18 lines · Luis R. Rodriguez
Quoted 16 lines · Konrad Rzeszutek Wilk
Quoted 14 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Quoted 4 lines
Quoted 2 lines
Ingo (x86 guys) mentioned in one of his emails that he glosses over emails if they say 'xen'.
Then this should be able to go through David Vrabel no, as he does care.
:-)
Quoted 6 lines
Quoted 2 lines
Perhaps you need to change the title to be more catchy?
If folks don't want to deal with Xen patches it should be fine, but we do need a route upstream, this seems to make sense to go through David Vrabel in the future no?
Yes, any of the Xen maintainers (me, David, or Boris).
Quoted 2 lines
Luis
Quoted 11 lines · Konrad Rzeszutek Wilk
Quoted 10 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Quoted 7 lines
Quoted 4 lines
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Ingo (x86 guys) mentioned in one of his emails that he glosses over emails if they say 'xen'.
Then this should be able to go through David Vrabel no, as he does care.
Quoted 1 line
Perhaps you need to change the title to be more catchy?
If folks don't want to deal with Xen patches it should be fine, but we do need a route upstream, this seems to make sense to go through David Vrabel in the future no?
Luis
Quoted 10 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Quoted 4 lines
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Ingo (x86 guys) mentioned in one of his emails that he glosses over emails if they say 'xen'.
Perhaps you need to change the title to be more catchy?
Quoted 5 lines
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel
Quoted 7 lines · Luis R. Rodriguez
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Ok, sounds good, and I agree it would be better to hold off on doing this if there are going to be substantial changes to the config options later. I think once the x86 bits get an ack from one of the x86 guys that you should be good to go!
Quoted 2 lines · David Rientjes
Woohoo, so does this mean that Luis's series will finally be merged into a
tree somewhere? It's been a lengthy wait to try to get this merged.
David Rientjes (as I'm also Cc'ing David Vrabel),
I am reworking Xen's kconfig stuff right now, so perhaps what is best is for this series to be folded under those changes and I'd submit them as the last series in the changes. That would avoid collateral changes as I revamp tons of Xen kconfig things. This would then go under David Vrabel's tree, but since it involves x86 stuff its unclear if its OK for that -- I think so? Let me know.
Luis
Quoted 9 lines · Michal Marek
Quoted 5 lines · David Rientjes
Quoted 2 lines
We need an update to the
MAINTAINERSfile if "Yann E. MORIN" <[email protected]> isn't the activeKconfigmaintainer anymore.Yes, we do. Michal, what update would you suggest?
I'll revert the patch that added Yann. That is, change the contact back to me and the status to "Odd fixes".
Woohoo, so does this mean that Luis's series will finally be merged into a
tree somewhere? It's been a lengthy wait to try to get this merged.
Quoted 5 lines · Paul Bolle
Quoted 2 lines · David Rientjes
We need an update to the
MAINTAINERSfile if "Yann E. MORIN" <[email protected]> isn't the activeKconfigmaintainer anymore.Yes, we do. Michal, what update would you suggest?
I'll revert the patch that added Yann. That is, change the contact back to me and the status to "Odd fixes".
Michal
Quoted 2 lines · David Rientjes
We need an update to the
MAINTAINERSfile if "Yann E. MORIN" <[email protected]> isn't the activeKconfigmaintainer anymore.
Yes, we do. Michal, what update would you suggest?
Thanks,
Paul Bolle
Quoted 2 lines · Luis R. Rodriguez
David should this go through your tree? Can anyone provide pointers?
I think it should probably go through Michal's tree?
It would help to have an ack from at least one of the x86 maintainers, so maybe add Ingo Molnar <[email protected]> and Thomas Gleixner <[email protected]>.
We need an update to the MAINTAINERS file if "Yann E. MORIN" <[email protected]> isn't the active Kconfig maintainer anymore.
If all else fails, I'd try to ask Andrew Morton
<[email protected]> to route it.
Quoted 41 lines · Luis R. Rodriguez
Quoted 40 lines · Michal Marek
Dne 30.1.2015 v 19:25 Luis R. Rodriguez napsal(a):
Quoted 39 lines · Michal Marek
Quoted 38 lines · Paul Bolle
Quoted 36 lines
[Added Michal. Removed Yann.]
Quoted 22 lines · Luis R. Rodriguez
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configQuoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them
I got them, sorry for the delay. You can add Acked-by: Michal Marek <[email protected]> if you want.
Thanks Michal, what tree should this go through though?
David should this go through your tree? Can anyone provide pointers?
Luis
Quoted 40 lines · Michal Marek
Dne 30.1.2015 v 19:25 Luis R. Rodriguez napsal(a):
Quoted 39 lines · Michal Marek
Quoted 38 lines · Paul Bolle
Quoted 36 lines
[Added Michal. Removed Yann.]
Quoted 22 lines · Luis R. Rodriguez
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configQuoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them
I got them, sorry for the delay. You can add Acked-by: Michal Marek <[email protected]> if you want.
Thanks Michal, what tree should this go through though?
Luis
Dne 30.1.2015 v 19:25 Luis R. Rodriguez napsal(a):
Quoted 34 lines · Michal Marek
Quoted 33 lines · Paul Bolle
Quoted 32 lines
[Added Michal. Removed Yann.]
Quoted 29 lines · Luis R. Rodriguez
Quoted 27 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configQuoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them
I got them, sorry for the delay. You can add Acked-by: Michal Marek <[email protected]> if you want.
Michal
Quoted 31 lines · Michal Marek
Quoted 30 lines · Paul Bolle
[Added Michal. Removed Yann.]
Quoted 27 lines · Luis R. Rodriguez
Quoted 26 lines · Luis R. Rodriguez
Quoted 24 lines · Stefano Stabellini
Quoted 12 lines · Luis R. Rodriguez
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperQuoted 8 lines
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configWho could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
I did not see this. Can you please bounce me the original series?
Done, let me know if you did not get them, and sorry for not adding you on the original To list, in no way did I consider this had to go through you as it didn't include any major kconfig changes and though this was rather more of an x86 / xen tree thing.
Luis
Quoted 30 lines · Paul Bolle
[Added Michal. Removed Yann.]
Quoted 27 lines · Luis R. Rodriguez
Quoted 26 lines · Luis R. Rodriguez
Quoted 24 lines · Stefano Stabellini
Quoted 12 lines · Luis R. Rodriguez
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperQuoted 8 lines
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configWho could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
I did not see this. Can you please bounce me the original series?
Thanks,
Michal
[Added Michal. Removed Yann.]
Quoted 22 lines · Luis R. Rodriguez
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Yann has disappeared a year ago. Michal now, informally, keeps an eye on kconfig related patches.
Paul Bolle
Quoted 21 lines · Luis R. Rodriguez
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Hey Yann, wondering if you had any feedback. Thanks.
Luis
Quoted 20 lines · Stefano Stabellini
Quoted 19 lines · Luis R. Rodriguez
Quoted 17 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helperarch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Quoted 4 lines
Quoted 1 line
Who could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
*Poke*
Luis
Quoted 12 lines · Luis R. Rodriguez
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 8 lines
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.configWho could these changes go through?
I would be OK with taking it in the Xen tree, but I would feel more comfortable doing that if you had an ack from Yann Morin (CC'ed).
Quoted 11 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This v3 addresses Stefano's feedback from the v2 series, namely moving PCI stuff to x86 as its all x86 specific and also just removing the
CONFIG_TCG_XEN=mfrom the general config. To be clear the changes from the v2 series are below.Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 6 lines
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Who could these changes go through?
Luis