x86/arm64: add xenconfig
Subsystems (5)
v4 cover x86/arm64: add xenconfig
From: "Luis R. Rodriguez" <[email protected]>
This v4 addresses the missing CONFIG_HYPERVISOR_GUEST and CONFIG_PARAVIRT as noted by David.
Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper
arch/x86/configs/xen.config | 11 +++++++++++ kernel/configs/xen.config | 27 +++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 44 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Signature · 1 line
2.2.2
PATCH v4 1/2 x86, platform, xen, kconfig: clarify kvmconfig is for kvm
From: "Luis R. Rodriguez" <[email protected]>
We'll be adding options for xen as well.
--- scripts/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
@@ -141,7 +141,7 @@ help: @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - @echo ' kvmconfig - Enable additional options for guest kernel support' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2
PATCH v4 1/2 x86, platform, xen, kconfig: clarify kvmconfig is for kvm
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
We'll be adding options for xen as well.
--- scripts/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
@@ -141,7 +141,7 @@ help: @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - @echo ' kvmconfig - Enable additional options for guest kernel support' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2
PATCH v4 2/2 x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
--- arch/x86/configs/xen.config | 11 +++++++++++ kernel/configs/xen.config | 27 +++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 43 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +11 -0
@@ -0,0 +1,11 @@ +CONFIG_HYPERVISOR_GUEST=y +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +27 -0
@@ -0,0 +1,27 @@ +CONFIG_PARAVIRT=y +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 27 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Cc Josh Triplett <[email protected]>Cc Borislav Petkov <[email protected]>Cc Pekka Enberg <[email protected]>Cc David Rientjes <[email protected]>Cc Michal Marek <[email protected]>Cc Randy Dunlap <[email protected]>Cc David Vrabel <[email protected]>
Quoted 8 lines
Cc Ian Campbell <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Acked-by Julien Grall <[email protected]>Acked-by Michal Marek <[email protected]>Reviewed-by Josh Triplett <[email protected]>Signed-off-by Luis R. Rodriguez <[email protected]>
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 38 lines · David Rientjes
Quoted 27 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Cc Josh Triplett <[email protected]>Cc Borislav Petkov <[email protected]>Cc Pekka Enberg <[email protected]>Cc David Rientjes <[email protected]>Cc Michal Marek <[email protected]>Cc Randy Dunlap <[email protected]>Cc David Vrabel <[email protected]>Quoted 8 lines
Cc Ian Campbell <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Acked-by Julien Grall <[email protected]>Acked-by Michal Marek <[email protected]>Reviewed-by Josh Triplett <[email protected]>Signed-off-by Luis R. Rodriguez <[email protected]>
Quoted 1 line
Acked-by David Rientjes <[email protected]>
David,
since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.
Thoughts?
Luis
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 10 lines · Luis R. Rodriguez
David,
since I'm making some
Kconfigchanges to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.Thoughts?
Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 10 lines · David Rientjes
Quoted 8 lines · Luis R. Rodriguez
David,
since I'm making some
Kconfigchanges to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.
Quoted 6 lines
Quoted 2 lines
Thoughts?
Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.
Long story short: the expected changes never panned out for a variety of reasons, so I'm going to respn this again. David Vrabel, I plan on basing this on your for-linus-4.1b branch, if there is a more suitable branch please let me know.
Luis
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to David RientjesQuoted 10 lines · David Rientjes
Quoted 8 lines · Luis R. Rodriguez
David,
since I'm making some
Kconfigchanges to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.
Quoted 6 lines
Quoted 2 lines
Thoughts?
Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.
Long story short: the expected changes never panned out for a variety of reasons, so I'm going to respn this again. David Vrabel, I plan on basing this on your for-linus-4.1b branch, if there is a more suitable branch please let me know.
Luis
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezQuoted 10 lines · Luis R. Rodriguez
David,
since I'm making some
Kconfigchanges to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.Thoughts?
Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to David RientjesQuoted 38 lines · David Rientjes
Quoted 27 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Cc Josh Triplett <[email protected]>Cc Borislav Petkov <[email protected]>Cc Pekka Enberg <[email protected]>Cc David Rientjes <[email protected]>Cc Michal Marek <[email protected]>Cc Randy Dunlap <[email protected]>Cc David Vrabel <[email protected]>Quoted 8 lines
Cc Ian Campbell <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Acked-by Julien Grall <[email protected]>Acked-by Michal Marek <[email protected]>Reviewed-by Josh Triplett <[email protected]>Signed-off-by Luis R. Rodriguez <[email protected]>
Quoted 1 line
Acked-by David Rientjes <[email protected]>
David,
since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.
Thoughts?
Luis
Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezQuoted 27 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Cc Josh Triplett <[email protected]>Cc Borislav Petkov <[email protected]>Cc Pekka Enberg <[email protected]>Cc David Rientjes <[email protected]>Cc Michal Marek <[email protected]>Cc Randy Dunlap <[email protected]>Cc David Vrabel <[email protected]>
Quoted 8 lines
Cc Ian Campbell <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Acked-by Julien Grall <[email protected]>Acked-by Michal Marek <[email protected]>Reviewed-by Josh Triplett <[email protected]>Signed-off-by Luis R. Rodriguez <[email protected]>
PATCH v4 2/2 x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
--- arch/x86/configs/xen.config | 11 +++++++++++ kernel/configs/xen.config | 27 +++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 43 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +11 -0
@@ -0,0 +1,11 @@ +CONFIG_HYPERVISOR_GUEST=y +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +27 -0
@@ -0,0 +1,27 @@ +CONFIG_PARAVIRT=y +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2