Skip to contentSkip to conversation

x86/arm64: add xenconfig

PATCH Superseded Luis R. Rodriguez 3 participants 13 messages Feb 11, 2015 – May 19, 2015

Subsystems (5)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover x86/arm64: add xenconfig

From: "Luis R. Rodriguez" <[email protected]>

This v4 addresses the missing CONFIG_HYPERVISOR_GUEST and CONFIG_PARAVIRT as noted by David.

Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper

 arch/x86/configs/xen.config | 11 +++++++++++
 kernel/configs/xen.config   | 27 +++++++++++++++++++++++++++
 scripts/kconfig/Makefile    |  7 ++++++-
 3 files changed, 44 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/configs/xen.config
 create mode 100644 kernel/configs/xen.config
Signature · 1 line
2.2.2
#1 lore raw

PATCH v4 1/2 x86, platform, xen, kconfig: clarify kvmconfig is for kvm

From: "Luis R. Rodriguez" <[email protected]>

We'll be adding options for xen as well.

---
 scripts/kconfig/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
index 9645c07..ff612b0 100644
@@ -141,7 +141,7 @@ help:
 	@echo  '  randconfig	  - New config with random answer to all options'
 	@echo  '  listnewconfig   - List new options'
 	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
-	@echo  '  kvmconfig	  - Enable additional options for guest kernel support'
+	@echo  '  kvmconfig	  - Enable additional options for kvm guest kernel support'
 	@echo  '  tinyconfig	  - Configure the tiniest possible kernel'
 
 # lxdialog stuff
Signature · 1 line
2.2.2
#2 lore raw

PATCH v4 1/2 x86, platform, xen, kconfig: clarify kvmconfig is for kvm

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

We'll be adding options for xen as well.

---
 scripts/kconfig/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
index 9645c07..ff612b0 100644
@@ -141,7 +141,7 @@ help:
 	@echo  '  randconfig	  - New config with random answer to all options'
 	@echo  '  listnewconfig   - List new options'
 	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
-	@echo  '  kvmconfig	  - Enable additional options for guest kernel support'
+	@echo  '  kvmconfig	  - Enable additional options for kvm guest kernel support'
 	@echo  '  tinyconfig	  - Configure the tiniest possible kernel'
 
 # lxdialog stuff
Signature · 1 line
2.2.2
#3 lore raw

PATCH v4 2/2 x86, arm, platform, xen, kconfig: add xen defconfig helper

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This lets you build a kernel which can support xen dom0 or xen guests by just using:

make xenconfig

on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.

---
 arch/x86/configs/xen.config | 11 +++++++++++
 kernel/configs/xen.config   | 27 +++++++++++++++++++++++++++
 scripts/kconfig/Makefile    |  5 +++++
 3 files changed, 43 insertions(+)
 create mode 100644 arch/x86/configs/xen.config
 create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +11 -0
new file mode 100644
index 0000000..3281461
@@ -0,0 +1,11 @@
+CONFIG_HYPERVISOR_GUEST=y
+# x86 xen specific config options
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
+CONFIG_XEN_PVH=y
+CONFIG_XEN_MCE_LOG=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +27 -0
new file mode 100644
index 0000000..18eeb35
@@ -0,0 +1,27 @@
+CONFIG_PARAVIRT=y
+# generic config
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+CONFIG_XEN_WDT=m
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
index ff612b0..f4a8f89 100644
@@ -117,6 +117,10 @@ PHONY += kvmconfig
 kvmconfig:
 	$(call mergeconfig,kvm_guest)
 
+PHONY += xenconfig
+xenconfig:
+	$(call mergeconfig,xen)
+
 PHONY += tinyconfig
 tinyconfig: allnoconfig
 	$(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help:
 	@echo  '  listnewconfig   - List new options'
 	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
 	@echo  '  kvmconfig	  - Enable additional options for kvm guest kernel support'
+	@echo  '  xenconfig       - Enable additional options for xen dom0 and guest kernel support'
 	@echo  '  tinyconfig	  - Configure the tiniest possible kernel'
 
 # lxdialog stuff
Signature · 1 line
2.2.2
Acked-by on v4 2/2
#4 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

Quoted 27 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This lets you build a kernel which can support xen dom0 or xen guests by just using:

make xenconfig

on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.

Cc Josh Triplett <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Pekka Enberg <[email protected]>
Cc David Rientjes <[email protected]>
Cc Michal Marek <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc David Vrabel <[email protected]>
Quoted 8 lines
#5 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

Quoted 38 lines · David Rientjes
Quoted 27 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This lets you build a kernel which can support xen dom0 or xen guests by just using:

make xenconfig

on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.

Cc Josh Triplett <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Pekka Enberg <[email protected]>
Cc David Rientjes <[email protected]>
Cc Michal Marek <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc David Vrabel <[email protected]>
Quoted 8 lines
Quoted 1 line

David,

since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.

Thoughts?

Luis

#6 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

Quoted 10 lines · Luis R. Rodriguez

David,

since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.

Thoughts?

Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.

#7 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

Quoted 10 lines · David Rientjes
Quoted 8 lines · Luis R. Rodriguez

David,

since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.

Quoted 6 lines
Quoted 2 lines

Thoughts?

Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.

Long story short: the expected changes never panned out for a variety of reasons, so I'm going to respn this again. David Vrabel, I plan on basing this on your for-linus-4.1b branch, if there is a more suitable branch please let me know.

Luis

#8 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

In reply to David Rientjes
Quoted 10 lines · David Rientjes
Quoted 8 lines · Luis R. Rodriguez

David,

since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.

Quoted 6 lines
Quoted 2 lines

Thoughts?

Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.

Long story short: the expected changes never panned out for a variety of reasons, so I'm going to respn this again. David Vrabel, I plan on basing this on your for-linus-4.1b branch, if there is a more suitable branch please let me know.

Luis

#9 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

In reply to Luis R. Rodriguez
Quoted 10 lines · Luis R. Rodriguez

David,

since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.

Thoughts?

Sure, if you're planning on kconfig changes then I agree that this should come later, either as part of the same patchset if it logically makes sense or just in a follow-up patchset.

#10 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

In reply to David Rientjes
Quoted 38 lines · David Rientjes
Quoted 27 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This lets you build a kernel which can support xen dom0 or xen guests by just using:

make xenconfig

on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.

Cc Josh Triplett <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Pekka Enberg <[email protected]>
Cc David Rientjes <[email protected]>
Cc Michal Marek <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc David Vrabel <[email protected]>
Quoted 8 lines
Quoted 1 line

David,

since I'm making some Kconfig changes to Xen I think I should fold this into that series with the modifications required last so as to avoid other commits and have this go in clean after all the changes, and have this go through you with that.

Thoughts?

Luis

Acked-by on v4 2/2
#11 lore raw

Re: [PATCH v4 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper

In reply to Luis R. Rodriguez
Quoted 27 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This lets you build a kernel which can support xen dom0 or xen guests by just using:

make xenconfig

on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.

Cc Josh Triplett <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Pekka Enberg <[email protected]>
Cc David Rientjes <[email protected]>
Cc Michal Marek <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc David Vrabel <[email protected]>
Quoted 8 lines
#12 lore raw

PATCH v4 2/2 x86, arm, platform, xen, kconfig: add xen defconfig helper

In reply to Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

This lets you build a kernel which can support xen dom0 or xen guests by just using:

make xenconfig

on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.

---
 arch/x86/configs/xen.config | 11 +++++++++++
 kernel/configs/xen.config   | 27 +++++++++++++++++++++++++++
 scripts/kconfig/Makefile    |  5 +++++
 3 files changed, 43 insertions(+)
 create mode 100644 arch/x86/configs/xen.config
 create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +11 -0
new file mode 100644
index 0000000..3281461
@@ -0,0 +1,11 @@
+CONFIG_HYPERVISOR_GUEST=y
+# x86 xen specific config options
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
+CONFIG_XEN_PVH=y
+CONFIG_XEN_MCE_LOG=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +27 -0
new file mode 100644
index 0000000..18eeb35
@@ -0,0 +1,27 @@
+CONFIG_PARAVIRT=y
+# generic config
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+CONFIG_XEN_WDT=m
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
index ff612b0..f4a8f89 100644
@@ -117,6 +117,10 @@ PHONY += kvmconfig
 kvmconfig:
 	$(call mergeconfig,kvm_guest)
 
+PHONY += xenconfig
+xenconfig:
+	$(call mergeconfig,xen)
+
 PHONY += tinyconfig
 tinyconfig: allnoconfig
 	$(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help:
 	@echo  '  listnewconfig   - List new options'
 	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
 	@echo  '  kvmconfig	  - Enable additional options for kvm guest kernel support'
+	@echo  '  xenconfig       - Enable additional options for xen dom0 and guest kernel support'
 	@echo  '  tinyconfig	  - Configure the tiniest possible kernel'
 
 # lxdialog stuff
Signature · 1 line
2.2.2