Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
PATCH v2 1/1 Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
v1 changes:
* Update the commit id as per Tejun's comments.
* Add a bit explanation.
v2 changes:
* Update the comments from sergei.
---
Suman Tripathi (1):
ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO
mode command.
drivers/ata/ahci_xgene.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--
1.8.2.1
PATCH v2 1/1 ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
This patch addresses the issue with ATA_CMD_SMART pio mode command for enumeration and device detection with ATA devices. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. It is the same issue as in the commit 2a0bdff6b958d1b2523d2754b6cd5e0ea4053016(fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command).
For example : without this patch it results in READ DMA command failure as show below :
[ 126.700072] ata2.00: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x6 frozen
[ 126.707089] ata2.00: failed command: READ DMA
[ 126.711426] ata2.00: cmd c8/00:08:00:55:57/00:00:00:00:00/e1 tag 1
dma 4096 in
[ 126.711426] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask
0x4 (timeout)
[ 126.725956] ata2.00: status: { DRDY }---
--- drivers/ata/ahci_xgene.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/ata/ahci_xgene.c +2 -1
@@ -211,7 +211,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) }if (unlikely ((ctx->last_cmd[ap->port_no] ==ATA_CMD_ID_ATA ) || - (ctx->last_cmd[ap->port_no] ==ATA_CMD_PACKET ))) + (ctx->last_cmd[ap->port_no] ==ATA_CMD_PACKET ) || + (ctx->last_cmd[ap->port_no] ==ATA_CMD_SMART )))xgene_ahci_restart_engine (ap); rc =ahci_qc_issue (qc);
--
1.8.2.1
PATCH v2 1/1 ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
Hello.
Quoted 6 lines · Suman Tripathi
This patch addresses the issue with
ATA_CMD_SMARTpio mode command for enumeration and device detection with ATA devices. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. It is the same issue as in the commit 2a0bdff6b958d1b2523d2754b6cd5e0ea4053016(fix the
You forgot a space before '('.
Quoted 2 lines
dma state machine lockup for the IDENTIFY DEVICE PIO mode command).
Actually, the summary is "ahci_xgene: fix the dma state machine lockup for
the IDENTIFY DEVICE PIO mode command.", i.e. yours is missing a prefix.
[...]
Quoted 2 lines
Signed-off-by Suman Tripathi <[email protected]>Reported-by Mark Langsdorf <[email protected]>
MBR, Sergei