Skip to contentSkip to conversation

Fix min dbuf, 90/270 wm calcs

PATCH In review Chandra Konduru 3 participants 6 messages Jun 26, 2015 – Jun 30, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Fix min dbuf, 90/270 wm calcs

Resending with correct patches.

This patch series allocates minimum dbuf blocks required for tile-y, tile-yf buffers correctly as per bspec. Also in WM calculations, for 90/270, swaps source width and height.

Chandra Konduru (2):
drm/i915: Allocate min dbuf blocks per bspec drm/i915: In DBUF/WM calcs for 90/270, swap w & h

 drivers/gpu/drm/i915/intel_pm.c |   71 +++++++++++++++++++++++++++++++++++----
 1 file changed, 65 insertions(+), 6 deletions(-)
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/2 drm/i915: Allocate min dbuf blocks per bspec

Properly allocate min blocks per hw requirements.

---
 drivers/gpu/drm/i915/intel_pm.c |   39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +37 -2
index 32ff034..ea3e435 100644
@@ -2679,6 +2679,41 @@ skl_get_total_relative_data_rate(struct intel_crtc *intel_crtc,
 	return total_data_rate;
 }
 
+static uint16_t
+skl_dbuf_min_alloc(const struct intel_plane_wm_parameters *p, int y_plane)
+{
+	uint16_t min_alloc;
+
+	/* For packed formats, no y-plane, return 0 */
+	if (y_plane && !p->y_bytes_per_pixel)
+		return 0;
+
+
+	if (p->tiling == I915_FORMAT_MOD_Y_TILED ||
+	    p->tiling == I915_FORMAT_MOD_Yf_TILED) {
+		uint32_t min_scanlines = 8;
+		uint8_t bytes_per_pixel =
+			y_plane ? p->y_bytes_per_pixel : p->bytes_per_pixel;
+
+		switch (bytes_per_pixel) {
+		case 1:
+			min_scanlines = 32;
+			break;
+		case 2:
+			min_scanlines = 16;
+			break;
+		case 8:
+			WARN(1, "Unsupported pixel depth for rotation");
+		}
+		min_alloc = DIV_ROUND_UP((4 * p->horiz_pixels/(y_plane ? 1 : 2) *
+			bytes_per_pixel), 512) * min_scanlines/4 + 3;
+	} else {
+		min_alloc = 8;
+	}
+
+	return min_alloc;
+}
+
 static void
 skl_allocate_pipe_ddb(struct drm_crtc *crtc,
 		      const struct intel_wm_config *config,
@@ -2719,9 +2754,9 @@ skl_allocate_pipe_ddb(struct drm_crtc *crtc,
 		if (!p->enabled)
 			continue;
 
-		minimum[plane] = 8;
+		minimum[plane] = skl_dbuf_min_alloc(p, 0);    /* uv-plane/packed */
 		alloc_size -= minimum[plane];
-		y_minimum[plane] = p->y_bytes_per_pixel ? 8 : 0;
+		y_minimum[plane] = skl_dbuf_min_alloc(p, 1);  /* y-plane */
 		alloc_size -= y_minimum[plane];
 	}
 
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH 2/2 drm/i915: In DBUF/WM calcs for 90/270, swap w & h

In reply to Chandra Konduru

This patch swaps src width and height for dbuf/wm calculations when rotation is 90/270 as per hw requirements.

---
 drivers/gpu/drm/i915/intel_pm.c |   32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +28 -4
index ea3e435..767313b 100644
@@ -2913,6 +2913,8 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 	enum pipe pipe = intel_crtc->pipe;
 	struct drm_plane *plane;
 	struct drm_framebuffer *fb;
+	struct intel_plane_state *plane_state;
+	int src_w, src_h;
 	int i = 1; /* Index for sprite planes start */
 
 	p->active = intel_crtc->active;
@@ -2921,6 +2923,7 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
 		fb = crtc->primary->state->fb;
+		plane_state = to_intel_plane_state(crtc->primary->state);
 		/* For planar: Bpp is for uv plane, y_Bpp is for y plane */
 		if (fb) {
 			p->plane[0].enabled = true;
@@ -2935,8 +2938,22 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 			p->plane[0].y_bytes_per_pixel = 0;
 			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		}
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
+
+		if (drm_rect_width(&plane_state->src)) {
+			src_w = drm_rect_width(&plane_state->src) >> 16;
+			src_h = drm_rect_height(&plane_state->src) >> 16;
+		} else {
+			src_w = intel_crtc->config->pipe_src_w;
+			src_h = intel_crtc->config->pipe_src_h;
+		}
+
+		if (intel_rotation_90_or_270(crtc->primary->state->rotation)) {
+			p->plane[0].horiz_pixels = src_h;
+			p->plane[0].vert_pixels = src_w;
+		} else {
+			p->plane[0].horiz_pixels = src_w;
+			p->plane[0].vert_pixels = src_h;
+		}
 		p->plane[0].rotation = crtc->primary->state->rotation;
 
 		fb = crtc->cursor->state->fb;
@@ -3468,8 +3485,15 @@ skl_update_sprite_wm(struct drm_plane *plane, struct drm_crtc *crtc,
 
 	intel_plane->wm.enabled = enabled;
 	intel_plane->wm.scaled = scaled;
-	intel_plane->wm.horiz_pixels = sprite_width;
-	intel_plane->wm.vert_pixels = sprite_height;
+
+	if (intel_rotation_90_or_270(plane->state->rotation)) {
+		intel_plane->wm.horiz_pixels = sprite_height;
+		intel_plane->wm.vert_pixels = sprite_width;
+	} else {
+		intel_plane->wm.horiz_pixels = sprite_width;
+		intel_plane->wm.vert_pixels = sprite_height;
+	}
+
 	intel_plane->wm.tiling = DRM_FORMAT_MOD_NONE;
 
 	/* For planar: Bpp is for UV plane, y_Bpp is for Y plane */
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

Re: [PATCH 2/2] drm/i915: In DBUF/WM calcs for 90/270, swap w & h

Quoted 4 lines · Chandra Konduru

This patch swaps src width and height for dbuf/wm calculations when rotation is 90/270 as per hw requirements.

Do we have an igt which provokes underruns and hence can test this automatically? Very tall/narrow buffers should do it I think. -Daniel

Quoted 75 lines
---
 drivers/gpu/drm/i915/intel_pm.c |   32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +28 -4
index ea3e435..767313b 100644
@@ -2913,6 +2913,8 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 	enum pipe pipe = intel_crtc->pipe;
 	struct drm_plane *plane;
 	struct drm_framebuffer *fb;
+	struct intel_plane_state *plane_state;
+	int src_w, src_h;
 	int i = 1; /* Index for sprite planes start */
 
 	p->active = intel_crtc->active;
@@ -2921,6 +2923,7 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 		p->pixel_rate = skl_pipe_pixel_rate(intel_crtc->config);
 
 		fb = crtc->primary->state->fb;
+		plane_state = to_intel_plane_state(crtc->primary->state);
 		/* For planar: Bpp is for uv plane, y_Bpp is for y plane */
 		if (fb) {
 			p->plane[0].enabled = true;
@@ -2935,8 +2938,22 @@ static void skl_compute_wm_pipe_parameters(struct drm_crtc *crtc,
 			p->plane[0].y_bytes_per_pixel = 0;
 			p->plane[0].tiling = DRM_FORMAT_MOD_NONE;
 		}
-		p->plane[0].horiz_pixels = intel_crtc->config->pipe_src_w;
-		p->plane[0].vert_pixels = intel_crtc->config->pipe_src_h;
+
+		if (drm_rect_width(&plane_state->src)) {
+			src_w = drm_rect_width(&plane_state->src) >> 16;
+			src_h = drm_rect_height(&plane_state->src) >> 16;
+		} else {
+			src_w = intel_crtc->config->pipe_src_w;
+			src_h = intel_crtc->config->pipe_src_h;
+		}
+
+		if (intel_rotation_90_or_270(crtc->primary->state->rotation)) {
+			p->plane[0].horiz_pixels = src_h;
+			p->plane[0].vert_pixels = src_w;
+		} else {
+			p->plane[0].horiz_pixels = src_w;
+			p->plane[0].vert_pixels = src_h;
+		}
 		p->plane[0].rotation = crtc->primary->state->rotation;
 
 		fb = crtc->cursor->state->fb;
@@ -3468,8 +3485,15 @@ skl_update_sprite_wm(struct drm_plane *plane, struct drm_crtc *crtc,
 
 	intel_plane->wm.enabled = enabled;
 	intel_plane->wm.scaled = scaled;
-	intel_plane->wm.horiz_pixels = sprite_width;
-	intel_plane->wm.vert_pixels = sprite_height;
+
+	if (intel_rotation_90_or_270(plane->state->rotation)) {
+		intel_plane->wm.horiz_pixels = sprite_height;
+		intel_plane->wm.vert_pixels = sprite_width;
+	} else {
+		intel_plane->wm.horiz_pixels = sprite_width;
+		intel_plane->wm.vert_pixels = sprite_height;
+	}
+
 	intel_plane->wm.tiling = DRM_FORMAT_MOD_NONE;
 
 	/* For planar: Bpp is for UV plane, y_Bpp is for Y plane */
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

Re: [PATCH 2/2] drm/i915: In DBUF/WM calcs for 90/270, swap w & h

Quoted 4 lines

This patch swaps src width and height for dbuf/wm calculations when rotation is 90/270 as per hw requirements.

Do we have an igt which provokes underruns and hence can test this automatically? Very tall/narrow buffers should do it I think. -Daniel

Yes. Right now kms_rotation_crc is the case we have, but I'm also triggering something via kms_nv12 too.
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Tested-by on v1 2/2
#5 lore raw

Re: [PATCH 2/2] drm/i915: In DBUF/WM calcs for 90/270, swap w & h

In reply to Chandra Konduru

Task id: 6564 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied

ILK                                  303/303              303/303
SNB                                  312/312              312/312
IVB                                  343/343              343/343
BYT                                  284/284              284/284
HSW                                  380/380              380/380

-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx