Documentation: add Device tree bindings for hwmon/nct7802
Subsystems (2)
PATCH 1/1 Documentation: add Device tree bindings for hwmon/nct7802
reg-init implementation is borowerd from
broadcom,c45-reg-init and marvell,reg-init.
Signed-off-by Constantine Shulyupin <[email protected]>
---
--- .../devicetree/bindings/hwmon/nct7802.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/nct7802.txt
Documentation/devicetree/bindings/hwmon/nct7802.txt new file +27 -0
@@ -0,0 +1,27 @@ +Nuvoton NCT7802Y Hardware Monitoring IC + +Required node properties: + + - "compatible": must be "nuvoton,nct7802" + - "reg": I2C bus address of the device + +Optional properties: + +Numeric registors initialiaztion: + +- nct7802,reg-init : one of more sets of 4 cells. The first cell + is the page address, the second a register address within the page, + the third cell contains a mask to be ANDed with the existing register + value, and the fourth cell is ORed with the result to yield the + new register value. If the third cell has a value of zero, + no read of the existing value is performed. + +Example nct7802 node: + +nct7802 { + compatible = "nuvoton,nct7802"; + reg = <0x2a>; + nct7802,reg-init = + <0 0x21 0 0x01 > // START = 1 + <0 0x22 0x03 0x02>; // RTD1_MD = 2 +};
Signature · 6 lines
1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html