qcow2: reopen: Change driver-specific runtime options
v3 cover qcow2: reopen: Change driver-specific runtime options
This is part two of what I had sent earlier as "[PATCH 00/34] block:
Cache mode for children, reopen overhaul and more". Most of the patches were actually already reviewed in v1.
v3:
- Removed tests that depend on memory size of test machine [Max]
- Rebased, resolved conflicts with Berto's cache cleaning timer series
v2:
Apart from a few addressed review comments, there are no functional changes compared to v1. Some rebasing was necessary; also the qemu-iotests cases are new.
Kevin Wolf (13):
block: Allow specifying driver-specific options to reopen
qemu-io: Remove duplicate 'open' error message
qemu-io: Add command 'reopen'
qcow2: Improve error message
qcow2: Factor out qcow2_update_options()
qcow2: Move qcow2_update_options() call up
qcow2: Move rest of option handling to qcow2_update_options()
qcow2: Leave s unchanged on qcow2_update_options() failure
qcow2: Fix memory leak in qcow2_update_options() error path
qcow2: Make qcow2_update_options() suitable for transactions
qcow2: Support updating driver-specific options in reopen
qemu-iotests: Reopen qcow2 with lazy-refcounts change
qemu-iotests: More qcow2 reopen tests
block.c | 42 ++++- block/commit.c | 4 +- block/qcow2.c | 390 ++++++++++++++++++++++++++++++--------------- include/block/block.h | 4 +- qemu-io-cmds.c | 90 +++++++++++ qemu-io.c | 1 - tests/qemu-iotests/039 | 27 ++++ tests/qemu-iotests/039.out | 18 +++ tests/qemu-iotests/137 | 145 +++++++++++++++++ tests/qemu-iotests/137.out | 42 +++++ tests/qemu-iotests/group | 1 + 11 files changed, 630 insertions(+), 134 deletions(-) create mode 100755 tests/qemu-iotests/137 create mode 100644 tests/qemu-iotests/137.out
Signature · 1 line
1.8.3.1
PATCH v3 1/13 block: Allow specifying driver-specific options to reopen
--- block.c | 42 +++++++++++++++++++++++++++++++++++++++--- block/commit.c | 4 ++-- include/block/block.h | 4 +++- 3 files changed, 44 insertions(+), 6 deletions(-)
block.c +39 -3
@@ -1636,6 +1636,9 @@ typedef struct BlockReopenQueueEntry {* * bs is the BlockDriverState to add to the reopen queue. * +* options contains the changed options for the associated bs +* (the BlockReopenQueue takes ownership) +* * flags contains the open flags for the associated bs * * returns a pointer to bs_queue, which is either the newly allocated
@@ -1643,18 +1646,28 @@ typedef struct BlockReopenQueueEntry {* */ BlockReopenQueue *bdrv_reopen_queue (BlockReopenQueue *bs_queue, -BlockDriverState *bs,int flags) +BlockDriverState *bs, +QDict *options,int flags) {assert (bs !=NULL );BlockReopenQueueEntry *bs_entry;BdrvChild *child; +QDict *old_options;if (bs_queue ==NULL ) { bs_queue =g_new0 (BlockReopenQueue,1 );QSIMPLEQ_INIT (bs_queue); } +if (!options) { + options =qdict_new (); + } + + old_options =qdict_clone_shallow (bs->options); +qdict_join (options, old_options, false); +QDECREF (old_options); +/* bdrv_open() masks this flag out */ flags &= ~BDRV_O_PROTOCOL ;
@@ -1666,13 +1679,15 @@ BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue, } child_flags = child->role->inherit_flags (flags); -bdrv_reopen_queue (bs_queue, child->bs, child_flags); +/* TODO Pass down child flags (backing.*, extents.*, ...) */ +bdrv_reopen_queue (bs_queue, child->bs,NULL , child_flags); } bs_entry =g_new0 (BlockReopenQueueEntry,1 );QSIMPLEQ_INSERT_TAIL (bs_queue, bs_entry, entry); bs_entry->state.bs = bs; + bs_entry->state.options = options; bs_entry->state.flags = flags;return bs_queue;
@@ -1725,6 +1740,7 @@ cleanup:if (ret && bs_entry->prepared) {bdrv_reopen_abort (&bs_entry->state); } +QDECREF (bs_entry->state.options);g_free (bs_entry); }g_free (bs_queue);
@@ -1737,7 +1753,7 @@ int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp) {int ret =-1 ;Error *local_err =NULL ; -BlockReopenQueue *queue =bdrv_reopen_queue (NULL , bs, bdrv_flags); +BlockReopenQueue *queue =bdrv_reopen_queue (NULL , bs,NULL , bdrv_flags); ret =bdrv_reopen_multiple (queue, &local_err);if (local_err !=NULL ) {
@@ -1813,6 +1829,26 @@ int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue, goto error; } +/* Options that are not handled are only okay if they are unchanged +* compared to the old state. It is expected that some options are only +* used for the initial open, but not reopen (e.g. filename) */ +if (qdict_size (reopen_state->options)) { +const QDictEntry *entry =qdict_first (reopen_state->options); + +do { +QString *new_obj =qobject_to_qstring (entry->value); +const char *new =qstring_get_str (new_obj); +const char *old =qdict_get_try_str (reopen_state->bs->options, + entry->key); + +if (!old ||strcmp (new, old)) { +error_setg (errp,"Cannot change the option '%s'" , entry->key); + ret = -EINVAL ; + goto error; + } + }while ((entry =qdict_next (reopen_state->options, entry))); + } + ret =0 ; error:
block/commit.c +2 -2
@@ -236,11 +236,11 @@ void commit_start(BlockDriverState *bs, BlockDriverState *base,/* convert base & overlay_bs to r/w, if necessary */ if (!(orig_base_flags &BDRV_O_RDWR )) { - reopen_queue =bdrv_reopen_queue (reopen_queue, base, + reopen_queue =bdrv_reopen_queue (reopen_queue, base,NULL , orig_base_flags |BDRV_O_RDWR ); }if (!(orig_overlay_flags &BDRV_O_RDWR )) { - reopen_queue =bdrv_reopen_queue (reopen_queue, overlay_bs, + reopen_queue =bdrv_reopen_queue (reopen_queue, overlay_bs,NULL , orig_overlay_flags |BDRV_O_RDWR ); }if (reopen_queue) {
include/block/block.h +3 -1
@@ -147,6 +147,7 @@ typedef QSIMPLEQ_HEAD(BlockReopenQueue, BlockReopenQueueEntry) BlockReopenQueue;typedef struct BDRVReopenState {BlockDriverState *bs;int flags; +QDict *options;void *opaque; }BDRVReopenState ;
@@ -218,7 +219,8 @@ int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp);int bdrv_open (BlockDriverState **pbs,const char *filename,const char *reference,QDict *options,int flags,Error **errp);BlockReopenQueue *bdrv_reopen_queue (BlockReopenQueue *bs_queue, -BlockDriverState *bs,int flags); +BlockDriverState *bs, +QDict *options,int flags);int bdrv_reopen_multiple (BlockReopenQueue *bs_queue,Error **errp);int bdrv_reopen (BlockDriverState *bs,int bdrv_flags,Error **errp); int bdrv_reopen_prepare(BDRVReopenState *reopen_state,
Signature · 1 line
1.8.3.1
PATCH v3 2/13 qemu-io: Remove duplicate 'open' error message
In reply to Kevin Wolfqemu_opts_parse_noisily() already prints an error message with the exact reason why the parsing failed. No need to add another less specific one.
--- qemu-io.c | 1 - 1 file changed, 1 deletion(-)
qemu-io.c +0 -1
@@ -156,7 +156,6 @@ static int open_f(BlockBackend *blk, int argc, char **argv)break ;case 'o' :if (!qemu_opts_parse_noisily (&empty_opts, optarg, false)) { -printf ("could not parse option list -- %s\n" , optarg);qemu_opts_reset (&empty_opts);return 0 ; }
Signature · 1 line
1.8.3.1
PATCH v3 3/13 qemu-io: Add command 'reopen'
In reply to Kevin Wolf--- qemu-io-cmds.c | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+)
qemu-io-cmds.c +90 -0
@@ -1979,6 +1979,95 @@ static const cmdinfo_t map_cmd = { .oneline = "prints the allocated areas of a file", }; +static void reopen_help (void ) +{ +printf ( +"\n" +" Changes the open options of an already opened image\n" +"\n" +" Example:\n" +" 'reopen -o lazy-refcounts=on' - activates lazy refcount writeback on a qcow2 image\n" +"\n" +" -r, -- Reopen the image read-only\n" +" -c, -- Change the cache mode to the given value\n" +" -o, -- Changes block driver options (cf. 'open' command)\n" +"\n" ); +} + +static int reopen_f (BlockBackend *blk,int argc,char **argv); + +static QemuOptsList reopen_opts = { + .name ="reopen" , + .merge_lists = true, + .head =QTAILQ_HEAD_INITIALIZER (reopen_opts.head), + .desc = { +/* no elements => accept any params */ + {/* end of list */ } + }, +}; + +static const cmdinfo_t reopen_cmd = { + .name ="reopen" , + .argmin =0 , + .argmax =-1 , + .cfunc = reopen_f, + .args ="[-r] [-c cache] [-o options]" , + .oneline ="reopens an image with new options" , + .help = reopen_help, +}; + +static int reopen_f (BlockBackend *blk,int argc,char **argv) +{ +BlockDriverState *bs =blk_bs (blk); +QemuOpts *qopts; +QDict *opts; +int c; +int flags = bs->open_flags; + +BlockReopenQueue *brq; +Error *local_err =NULL ; + +while ((c =getopt (argc, argv,"c:o:r" )) !=-1 ) { +switch (c) { +case 'c' : +if (bdrv_parse_cache_flags (optarg, &flags) <0 ) { +error_report ("Invalid cache option: %s" , optarg); +return 0 ; + } +break ; +case 'o' : +if (!qemu_opts_parse_noisily (&reopen_opts, optarg,0 )) { +qemu_opts_reset (&reopen_opts); +return 0 ; + } +break ; +case 'r' : + flags &= ~BDRV_O_RDWR ; +break ; +default : +qemu_opts_reset (&reopen_opts); +return qemuio_command_usage (&reopen_cmd); + } + } + +if (optind != argc) { +qemu_opts_reset (&reopen_opts); +return qemuio_command_usage (&reopen_cmd); + } + + qopts =qemu_opts_find (&reopen_opts,NULL ); + opts = qopts ?qemu_opts_to_qdict (qopts,NULL ) :NULL ; +qemu_opts_reset (&reopen_opts); + + brq =bdrv_reopen_queue (NULL , bs, opts, flags); +bdrv_reopen_multiple (brq, &local_err); +if (local_err) { +error_report_err (local_err); + } + +return 0 ; +} +static int break_f (BlockBackend *blk,int argc,char **argv) {int ret;
@@ -2266,6 +2355,7 @@ static void __attribute((constructor)) init_qemuio_commands(void)qemuio_add_command (&discard_cmd);qemuio_add_command (&alloc_cmd);qemuio_add_command (&map_cmd); +qemuio_add_command (&reopen_cmd);qemuio_add_command (&break_cmd);qemuio_add_command (&remove_break_cmd);qemuio_add_command (&resume_cmd);
Signature · 1 line
1.8.3.1
PATCH v3 4/13 qcow2: Improve error message
In reply to Kevin WolfEric says that "any" sounds better than "either", and my non-native feeling says the same, so let's change it.
--- block/qcow2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
block/qcow2.c +1 -1
@@ -1030,7 +1030,7 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags, overlap_check_template =QCOW2_OL_ALL ; }else {error_setg (errp,"Unsupported value '%s' for qcow2 option " -"'overlap-check'. Allowed are either of the following: " +"'overlap-check'. Allowed are any of the following: " "none, constant, cached, all" , opt_overlap_check); ret = -EINVAL ; goto fail;
Signature · 1 line
1.8.3.1
PATCH v3 5/13 qcow2: Factor out qcow2_update_options()
In reply to Kevin WolfEventually we want to be able to change options at runtime. As a first step towards that goal, separate some option handling code from the general initialisation code in qcow2_open().
--- block/qcow2.c | 135 +++++++++++++++++++++++++++++++++------------------------- 1 file changed, 76 insertions(+), 59 deletions(-)
block/qcow2.c +76 -59
@@ -589,6 +589,80 @@ static void read_cache_sizes(BlockDriverState *bs, QemuOpts *opts, } } +static int qcow2_update_options (BlockDriverState *bs,QemuOpts *opts, +int flags,Error **errp) +{ +BDRVQcowState *s = bs->opaque; +const char *opt_overlap_check, *opt_overlap_check_template; +int overlap_check_template =0 ; +int i; +int ret; + + s->use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , + (s->compatible_features &QCOW2_COMPAT_LAZY_REFCOUNTS )); + + s->discard_passthrough[QCOW2_DISCARD_NEVER ] = false; + s->discard_passthrough[QCOW2_DISCARD_ALWAYS ] = true; + s->discard_passthrough[QCOW2_DISCARD_REQUEST ] = +qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_REQUEST , + flags &BDRV_O_UNMAP ); + s->discard_passthrough[QCOW2_DISCARD_SNAPSHOT ] = +qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_SNAPSHOT , true); + s->discard_passthrough[QCOW2_DISCARD_OTHER ] = +qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_OTHER , false); + + opt_overlap_check =qemu_opt_get (opts,QCOW2_OPT_OVERLAP ); + opt_overlap_check_template =qemu_opt_get (opts,QCOW2_OPT_OVERLAP_TEMPLATE ); +if (opt_overlap_check_template && opt_overlap_check && +strcmp (opt_overlap_check_template, opt_overlap_check)) + { +error_setg (errp,"Conflicting values for qcow2 options '" +QCOW2_OPT_OVERLAP "' ('%s') and '" QCOW2_OPT_OVERLAP_TEMPLATE +"' ('%s')" , opt_overlap_check, opt_overlap_check_template); + ret = -EINVAL ; + goto fail; + } +if (!opt_overlap_check) { + opt_overlap_check = opt_overlap_check_template ?:"cached" ; + } + +if (!strcmp (opt_overlap_check,"none" )) { + overlap_check_template =0 ; + }else if (!strcmp (opt_overlap_check,"constant" )) { + overlap_check_template =QCOW2_OL_CONSTANT ; + }else if (!strcmp (opt_overlap_check,"cached" )) { + overlap_check_template =QCOW2_OL_CACHED ; + }else if (!strcmp (opt_overlap_check,"all" )) { + overlap_check_template =QCOW2_OL_ALL ; + }else { +error_setg (errp,"Unsupported value '%s' for qcow2 option " +"'overlap-check'. Allowed are any of the following: " +"none, constant, cached, all" , opt_overlap_check); + ret = -EINVAL ; + goto fail; + } + + s->overlap_check =0 ; +for (i =0 ; i <QCOW2_OL_MAX_BITNR ; i++) { +/* overlap-check defines a template bitmask, but every flag may be +* overwritten through the associated boolean option */ + s->overlap_check |= +qemu_opt_get_bool (opts, overlap_bool_option_names[i], + overlap_check_template & (1 << i)) << i; + } + +if (s->use_lazy_refcounts && s->qcow_version <3 ) { +error_setg (errp,"Lazy refcounts require a qcow2 image with at least " +"qemu 1.1 compatibility level" ); + ret = -EINVAL ; + goto fail; + } + + ret =0 ; +fail: +return ret; +} +static int qcow2_open (BlockDriverState *bs,QDict *options,int flags,Error **errp) {
@@ -600,8 +674,6 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags,Error *local_err =NULL ;uint64_t ext_end;uint64_t l1_vm_state_index; -const char *opt_overlap_check, *opt_overlap_check_template; -int overlap_check_template =0 ;uint64_t l2_cache_size, refcount_cache_size;uint64_t cache_clean_interval;
@@ -992,69 +1064,14 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags, }/* Enable lazy_refcounts according to image and command line options */ - s->use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , - (s->compatible_features &QCOW2_COMPAT_LAZY_REFCOUNTS )); - - s->discard_passthrough[QCOW2_DISCARD_NEVER ] = false; - s->discard_passthrough[QCOW2_DISCARD_ALWAYS ] = true; - s->discard_passthrough[QCOW2_DISCARD_REQUEST ] = -qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_REQUEST , - flags &BDRV_O_UNMAP ); - s->discard_passthrough[QCOW2_DISCARD_SNAPSHOT ] = -qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_SNAPSHOT , true); - s->discard_passthrough[QCOW2_DISCARD_OTHER ] = -qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_OTHER , false); - - opt_overlap_check =qemu_opt_get (opts,QCOW2_OPT_OVERLAP ); - opt_overlap_check_template =qemu_opt_get (opts,QCOW2_OPT_OVERLAP_TEMPLATE ); -if (opt_overlap_check_template && opt_overlap_check && -strcmp (opt_overlap_check_template, opt_overlap_check)) - { -error_setg (errp,"Conflicting values for qcow2 options '" -QCOW2_OPT_OVERLAP "' ('%s') and '" QCOW2_OPT_OVERLAP_TEMPLATE -"' ('%s')" , opt_overlap_check, opt_overlap_check_template); - ret = -EINVAL ; - goto fail; - } -if (!opt_overlap_check) { - opt_overlap_check = opt_overlap_check_template ?:"cached" ; - } - -if (!strcmp (opt_overlap_check,"none" )) { - overlap_check_template =0 ; - }else if (!strcmp (opt_overlap_check,"constant" )) { - overlap_check_template =QCOW2_OL_CONSTANT ; - }else if (!strcmp (opt_overlap_check,"cached" )) { - overlap_check_template =QCOW2_OL_CACHED ; - }else if (!strcmp (opt_overlap_check,"all" )) { - overlap_check_template =QCOW2_OL_ALL ; - }else { -error_setg (errp,"Unsupported value '%s' for qcow2 option " -"'overlap-check'. Allowed are any of the following: " -"none, constant, cached, all" , opt_overlap_check); - ret = -EINVAL ; + ret =qcow2_update_options (bs, opts, flags, errp); +if (ret <0 ) { goto fail; } - s->overlap_check =0 ; -for (i =0 ; i <QCOW2_OL_MAX_BITNR ; i++) { -/* overlap-check defines a template bitmask, but every flag may be -* overwritten through the associated boolean option */ - s->overlap_check |= -qemu_opt_get_bool (opts, overlap_bool_option_names[i], - overlap_check_template & (1 << i)) << i; - } -qemu_opts_del (opts); opts =NULL ; -if (s->use_lazy_refcounts && s->qcow_version <3 ) { -error_setg (errp,"Lazy refcounts require a qcow2 image with at least " -"qemu 1.1 compatibility level" ); - ret = -EINVAL ; - goto fail; - } -#ifdef DEBUG_ALLOC {BdrvCheckResult result = {0 };
Signature · 1 line
1.8.3.1
PATCH v3 6/13 qcow2: Move qcow2_update_options() call up
In reply to Kevin Wolfqcow2_update_options() only updates some variables in BDRVQcowState and doesn't really depend on other parts of it being initialised yet, so it can be moved so that it immediately follows the other half of option handling code in qcow2_open().
--- block/qcow2.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
block/qcow2.c +9 -9
@@ -979,6 +979,15 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags, s->cache_clean_interval = cache_clean_interval;cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); +/* Enable lazy_refcounts according to image and command line options */ + ret =qcow2_update_options (bs, opts, flags, errp); +if (ret <0 ) { + goto fail; + } + +qemu_opts_del (opts); + opts =NULL ; + s->cluster_cache =g_malloc (s->cluster_size);/* one more sector for decompressed data alignment */ s->cluster_data = qemu_try_blockalign(bs->file, QCOW_MAX_CRYPT_CLUSTERS
@@ -1063,15 +1072,6 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags, } } -/* Enable lazy_refcounts according to image and command line options */ - ret =qcow2_update_options (bs, opts, flags, errp); -if (ret <0 ) { - goto fail; - } - -qemu_opts_del (opts); - opts =NULL ; -#ifdef DEBUG_ALLOC {BdrvCheckResult result = {0 };
Signature · 1 line
1.8.3.1
PATCH v3 7/13 qcow2: Move rest of option handling to qcow2_update_options()
In reply to Kevin WolfWith this commit, the handling of driver-specific options in qcow2_open() is completely separated out into qcow2_update_options().
--- block/qcow2.c | 134 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 68 insertions(+), 66 deletions(-)
block/qcow2.c +68 -66
@@ -589,15 +589,77 @@ static void read_cache_sizes(BlockDriverState *bs, QemuOpts *opts, } } -static int qcow2_update_options (BlockDriverState *bs,QemuOpts *opts, +static int qcow2_update_options (BlockDriverState *bs,QDict *options,int flags,Error **errp) {BDRVQcowState *s = bs->opaque; +QemuOpts *opts =NULL ;const char *opt_overlap_check, *opt_overlap_check_template;int overlap_check_template =0 ; +uint64_t l2_cache_size, refcount_cache_size; +uint64_t cache_clean_interval;int i; +Error *local_err =NULL ;int ret; + opts =qemu_opts_create (&qcow2_runtime_opts,NULL ,0 , &error_abort); +qemu_opts_absorb_qdict (opts, options, &local_err); +if (local_err) { +error_propagate (errp, local_err); + ret = -EINVAL ; + goto fail; + } + +/* get L2 table/refcount block cache size from command line options */ +read_cache_sizes (bs, opts, &l2_cache_size, &refcount_cache_size, + &local_err); +if (local_err) { +error_propagate (errp, local_err); + ret = -EINVAL ; + goto fail; + } + + l2_cache_size /= s->cluster_size; +if (l2_cache_size <MIN_L2_CACHE_SIZE ) { + l2_cache_size =MIN_L2_CACHE_SIZE ; + } +if (l2_cache_size >INT_MAX ) { +error_setg (errp,"L2 cache size too big" ); + ret = -EINVAL ; + goto fail; + } + + refcount_cache_size /= s->cluster_size; +if (refcount_cache_size <MIN_REFCOUNT_CACHE_SIZE ) { + refcount_cache_size =MIN_REFCOUNT_CACHE_SIZE ; + } +if (refcount_cache_size >INT_MAX ) { +error_setg (errp,"Refcount cache size too big" ); + ret = -EINVAL ; + goto fail; + } + +/* alloc L2 table/refcount block cache */ + s->l2_table_cache =qcow2_cache_create (bs, l2_cache_size); + s->refcount_block_cache =qcow2_cache_create (bs, refcount_cache_size); +if (s->l2_table_cache ==NULL || s->refcount_block_cache ==NULL ) { +error_setg (errp,"Could not allocate metadata caches" ); + ret = -ENOMEM ; + goto fail; + } + +/* New interval for cache cleanup timer */ + cache_clean_interval = +qemu_opt_get_number (opts,QCOW2_OPT_CACHE_CLEAN_INTERVAL ,0 ); +if (cache_clean_interval >UINT_MAX ) { +error_setg (errp,"Cache clean interval too big" ); + ret = -EINVAL ; + goto fail; + } + s->cache_clean_interval = cache_clean_interval; +cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); + +/* Enable lazy_refcounts according to image and command line options */ s->use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , (s->compatible_features &QCOW2_COMPAT_LAZY_REFCOUNTS ));
@@ -660,6 +722,9 @@ static int qcow2_update_options(BlockDriverState *bs, QemuOpts *opts, ret =0 ; fail: +qemu_opts_del (opts); + opts =NULL ; +return ret; }
@@ -670,12 +735,9 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags,unsigned int len, i;int ret =0 ;QCowHeader header; -QemuOpts *opts =NULL ;Error *local_err =NULL ;uint64_t ext_end;uint64_t l1_vm_state_index; -uint64_t l2_cache_size, refcount_cache_size; -uint64_t cache_clean_interval; ret =bdrv_pread (bs->file,0 , &header,sizeof (header));if (ret <0 ) {
@@ -923,71 +985,12 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags, } } -/* get L2 table/refcount block cache size from command line options */ - opts =qemu_opts_create (&qcow2_runtime_opts,NULL ,0 , &error_abort); -qemu_opts_absorb_qdict (opts, options, &local_err); -if (local_err) { -error_propagate (errp, local_err); - ret = -EINVAL ; - goto fail; - } - -read_cache_sizes (bs, opts, &l2_cache_size, &refcount_cache_size, - &local_err); -if (local_err) { -error_propagate (errp, local_err); - ret = -EINVAL ; - goto fail; - } - - l2_cache_size /= s->cluster_size; -if (l2_cache_size <MIN_L2_CACHE_SIZE ) { - l2_cache_size =MIN_L2_CACHE_SIZE ; - } -if (l2_cache_size >INT_MAX ) { -error_setg (errp,"L2 cache size too big" ); - ret = -EINVAL ; - goto fail; - } - - refcount_cache_size /= s->cluster_size; -if (refcount_cache_size <MIN_REFCOUNT_CACHE_SIZE ) { - refcount_cache_size =MIN_REFCOUNT_CACHE_SIZE ; - } -if (refcount_cache_size >INT_MAX ) { -error_setg (errp,"Refcount cache size too big" ); - ret = -EINVAL ; - goto fail; - } - -/* alloc L2 table/refcount block cache */ - s->l2_table_cache =qcow2_cache_create (bs, l2_cache_size); - s->refcount_block_cache =qcow2_cache_create (bs, refcount_cache_size); -if (s->l2_table_cache ==NULL || s->refcount_block_cache ==NULL ) { -error_setg (errp,"Could not allocate metadata caches" ); - ret = -ENOMEM ; - goto fail; - } - - cache_clean_interval = -qemu_opt_get_number (opts,QCOW2_OPT_CACHE_CLEAN_INTERVAL ,0 ); -if (cache_clean_interval >UINT_MAX ) { -error_setg (errp,"Cache clean interval too big" ); - ret = -EINVAL ; - goto fail; - } - s->cache_clean_interval = cache_clean_interval; -cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); - -/* Enable lazy_refcounts according to image and command line options */ - ret =qcow2_update_options (bs, opts, flags, errp); +/* Parse driver-specific options */ + ret =qcow2_update_options (bs, options, flags, errp);if (ret <0 ) { goto fail; } -qemu_opts_del (opts); - opts =NULL ; - s->cluster_cache =g_malloc (s->cluster_size);/* one more sector for decompressed data alignment */ s->cluster_data = qemu_try_blockalign(bs->file, QCOW_MAX_CRYPT_CLUSTERS
@@ -1081,7 +1084,6 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags,return ret; fail: -qemu_opts_del (opts);g_free (s->unknown_header_fields);cleanup_unknown_header_ext (bs);qcow2_free_snapshots (bs);
Signature · 1 line
1.8.3.1
Re: [Qemu-devel] [PATCH v3 07/13] qcow2: Move rest of option handling to qcow2_update_options()
Quoted 7 lines · Kevin Wolf
With this commit, the handling of driver-specific options in
qcow2_open()is completely separated out intoqcow2_update_options().Signed-off-by Kevin Wolf <[email protected]>--- block/qcow2.c | 134 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 68 insertions(+), 66 deletions(-)
PATCH v3 8/13 qcow2: Leave s unchanged on qcow2_update_options() failure
In reply to Kevin WolfOn return, either all new options should be applied to BDRVQcowState (on success), or all of the old settings should be preserved (on failure).
--- block/qcow2.c | 57 +++++++++++++++++++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 22 deletions(-)
block/qcow2.c +35 -22
@@ -597,7 +597,10 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options,const char *opt_overlap_check, *opt_overlap_check_template;int overlap_check_template =0 ;uint64_t l2_cache_size, refcount_cache_size; +Qcow2Cache *l2_table_cache; +Qcow2Cache *refcount_block_cache;uint64_t cache_clean_interval; +bool use_lazy_refcounts;int i;Error *local_err =NULL ;int ret;
@@ -640,9 +643,9 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, }/* alloc L2 table/refcount block cache */ - s->l2_table_cache =qcow2_cache_create (bs, l2_cache_size); - s->refcount_block_cache =qcow2_cache_create (bs, refcount_cache_size); -if (s->l2_table_cache ==NULL || s->refcount_block_cache ==NULL ) { + l2_table_cache =qcow2_cache_create (bs, l2_cache_size); + refcount_block_cache =qcow2_cache_create (bs, refcount_cache_size); +if (l2_table_cache ==NULL || refcount_block_cache ==NULL ) {error_setg (errp,"Could not allocate metadata caches" ); ret = -ENOMEM ; goto fail;
@@ -656,23 +659,18 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, ret = -EINVAL ; goto fail; } - s->cache_clean_interval = cache_clean_interval; -cache_clean_timer_init (bs,bdrv_get_aio_context (bs));/* Enable lazy_refcounts according to image and command line options */ - s->use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , + use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , (s->compatible_features &QCOW2_COMPAT_LAZY_REFCOUNTS )); +if (use_lazy_refcounts && s->qcow_version <3 ) { +error_setg (errp,"Lazy refcounts require a qcow2 image with at least " +"qemu 1.1 compatibility level" ); + ret = -EINVAL ; + goto fail; + } - s->discard_passthrough[QCOW2_DISCARD_NEVER ] = false; - s->discard_passthrough[QCOW2_DISCARD_ALWAYS ] = true; - s->discard_passthrough[QCOW2_DISCARD_REQUEST ] = -qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_REQUEST , - flags &BDRV_O_UNMAP ); - s->discard_passthrough[QCOW2_DISCARD_SNAPSHOT ] = -qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_SNAPSHOT , true); - s->discard_passthrough[QCOW2_DISCARD_OTHER ] = -qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_OTHER , false); - +/* Overlap check options */ opt_overlap_check =qemu_opt_get (opts,QCOW2_OPT_OVERLAP ); opt_overlap_check_template =qemu_opt_get (opts,QCOW2_OPT_OVERLAP_TEMPLATE ); if (opt_overlap_check_template && opt_overlap_check &&
@@ -704,6 +702,10 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, goto fail; } +/* +* Start updating fields in BDRVQcowState. +* After this point no failure is allowed any more. +*/ s->overlap_check =0 ;for (i =0 ; i <QCOW2_OL_MAX_BITNR ; i++) {/* overlap-check defines a template bitmask, but every flag may be
@@ -713,12 +715,23 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, overlap_check_template & (1 << i)) << i; } -if (s->use_lazy_refcounts && s->qcow_version <3 ) { -error_setg (errp,"Lazy refcounts require a qcow2 image with at least " -"qemu 1.1 compatibility level" ); - ret = -EINVAL ; - goto fail; - } + s->l2_table_cache = l2_table_cache; + s->refcount_block_cache = refcount_block_cache; + + s->use_lazy_refcounts = use_lazy_refcounts; + + s->discard_passthrough[QCOW2_DISCARD_NEVER ] = false; + s->discard_passthrough[QCOW2_DISCARD_ALWAYS ] = true; + s->discard_passthrough[QCOW2_DISCARD_REQUEST ] = +qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_REQUEST , + flags &BDRV_O_UNMAP ); + s->discard_passthrough[QCOW2_DISCARD_SNAPSHOT ] = +qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_SNAPSHOT , true); + s->discard_passthrough[QCOW2_DISCARD_OTHER ] = +qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_OTHER , false); + + s->cache_clean_interval = cache_clean_interval; +cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); ret =0 ; fail:
Signature · 1 line
1.8.3.1
Re: [Qemu-devel] [PATCH v3 08/13] qcow2: Leave s unchanged on qcow2_update_options() failure
Quoted 7 lines · Kevin Wolf
On return, either all new options should be applied to BDRVQcowState (on success), or all of the old settings should be preserved (on failure).
Signed-off-by Kevin Wolf <[email protected]>--- block/qcow2.c | 57 +++++++++++++++++++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 22 deletions(-)
PATCH v3 9/13 qcow2: Fix memory leak in qcow2_update_options() error path
In reply to Kevin Wolf--- block/qcow2.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
block/qcow2.c +10 -2
@@ -597,8 +597,8 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options,const char *opt_overlap_check, *opt_overlap_check_template;int overlap_check_template =0 ;uint64_t l2_cache_size, refcount_cache_size; -Qcow2Cache *l2_table_cache; -Qcow2Cache *refcount_block_cache; +Qcow2Cache *l2_table_cache =NULL ; +Qcow2Cache *refcount_block_cache =NULL ;uint64_t cache_clean_interval;bool use_lazy_refcounts;int i;
@@ -735,6 +735,14 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, ret =0 ; fail: +if (ret <0 ) { +if (l2_table_cache) { +qcow2_cache_destroy (bs, l2_table_cache); + } +if (refcount_block_cache) { +qcow2_cache_destroy (bs, refcount_block_cache); + } + }qemu_opts_del (opts); opts =NULL ;
Signature · 1 line
1.8.3.1
PATCH v3 10/13 qcow2: Make qcow2_update_options() suitable for transactions
In reply to Kevin WolfBefore we can allow updating options at runtime with bdrv_reopen(), we need to split the function into prepare/commit/abort parts.
--- block/qcow2.c | 113 +++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 73 insertions(+), 40 deletions(-)
block/qcow2.c +73 -40
@@ -589,18 +589,25 @@ static void read_cache_sizes(BlockDriverState *bs, QemuOpts *opts, } } -static int qcow2_update_options (BlockDriverState *bs,QDict *options, -int flags,Error **errp) +typedef struct Qcow2ReopenState { +Qcow2Cache *l2_table_cache; +Qcow2Cache *refcount_block_cache; +bool use_lazy_refcounts; +int overlap_check; +bool discard_passthrough[QCOW2_DISCARD_MAX ]; +uint64_t cache_clean_interval; +}Qcow2ReopenState ; + +static int qcow2_update_options_prepare (BlockDriverState *bs, +Qcow2ReopenState *r, +QDict *options,int flags, +Error **errp) {BDRVQcowState *s = bs->opaque;QemuOpts *opts =NULL ;const char *opt_overlap_check, *opt_overlap_check_template;int overlap_check_template =0 ;uint64_t l2_cache_size, refcount_cache_size; -Qcow2Cache *l2_table_cache =NULL ; -Qcow2Cache *refcount_block_cache =NULL ; -uint64_t cache_clean_interval; -bool use_lazy_refcounts;int i;Error *local_err =NULL ;int ret;
@@ -643,27 +650,27 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, }/* alloc L2 table/refcount block cache */ - l2_table_cache =qcow2_cache_create (bs, l2_cache_size); - refcount_block_cache =qcow2_cache_create (bs, refcount_cache_size); -if (l2_table_cache ==NULL || refcount_block_cache ==NULL ) { + r->l2_table_cache =qcow2_cache_create (bs, l2_cache_size); + r->refcount_block_cache =qcow2_cache_create (bs, refcount_cache_size); +if (r->l2_table_cache ==NULL || r->refcount_block_cache ==NULL ) {error_setg (errp,"Could not allocate metadata caches" ); ret = -ENOMEM ; goto fail; }/* New interval for cache cleanup timer */ - cache_clean_interval = + r->cache_clean_interval =qemu_opt_get_number (opts,QCOW2_OPT_CACHE_CLEAN_INTERVAL ,0 ); -if (cache_clean_interval >UINT_MAX ) { +if (r->cache_clean_interval >UINT_MAX ) {error_setg (errp,"Cache clean interval too big" ); ret = -EINVAL ; goto fail; }/* Enable lazy_refcounts according to image and command line options */ - use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , + r->use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , (s->compatible_features &QCOW2_COMPAT_LAZY_REFCOUNTS )); -if (use_lazy_refcounts && s->qcow_version <3 ) { +if (r->use_lazy_refcounts && s->qcow_version <3 ) {error_setg (errp,"Lazy refcounts require a qcow2 image with at least " "qemu 1.1 compatibility level" ); ret = -EINVAL ;
@@ -702,49 +709,75 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, goto fail; } -/* -* Start updating fields in BDRVQcowState. -* After this point no failure is allowed any more. -*/ - s->overlap_check =0 ; + r->overlap_check =0 ;for (i =0 ; i <QCOW2_OL_MAX_BITNR ; i++) {/* overlap-check defines a template bitmask, but every flag may be * overwritten through the associated boolean option */ - s->overlap_check |= + r->overlap_check |=qemu_opt_get_bool (opts, overlap_bool_option_names[i], overlap_check_template & (1 << i)) << i; } - s->l2_table_cache = l2_table_cache; - s->refcount_block_cache = refcount_block_cache; - - s->use_lazy_refcounts = use_lazy_refcounts; - - s->discard_passthrough[QCOW2_DISCARD_NEVER ] = false; - s->discard_passthrough[QCOW2_DISCARD_ALWAYS ] = true; - s->discard_passthrough[QCOW2_DISCARD_REQUEST ] = + r->discard_passthrough[QCOW2_DISCARD_NEVER ] = false; + r->discard_passthrough[QCOW2_DISCARD_ALWAYS ] = true; + r->discard_passthrough[QCOW2_DISCARD_REQUEST ] =qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_REQUEST , flags &BDRV_O_UNMAP ); - s->discard_passthrough[QCOW2_DISCARD_SNAPSHOT ] = + r->discard_passthrough[QCOW2_DISCARD_SNAPSHOT ] =qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_SNAPSHOT , true); - s->discard_passthrough[QCOW2_DISCARD_OTHER ] = + r->discard_passthrough[QCOW2_DISCARD_OTHER ] =qemu_opt_get_bool (opts,QCOW2_OPT_DISCARD_OTHER , false); - s->cache_clean_interval = cache_clean_interval; -cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); - ret =0 ; fail: -if (ret <0 ) { -if (l2_table_cache) { -qcow2_cache_destroy (bs, l2_table_cache); - } -if (refcount_block_cache) { -qcow2_cache_destroy (bs, refcount_block_cache); - } - }qemu_opts_del (opts); opts =NULL ; +return ret; +} + +static void qcow2_update_options_commit (BlockDriverState *bs, +Qcow2ReopenState *r) +{ +BDRVQcowState *s = bs->opaque; +int i; + + s->l2_table_cache = r->l2_table_cache; + s->refcount_block_cache = r->refcount_block_cache; + + s->overlap_check = r->overlap_check; + s->use_lazy_refcounts = r->use_lazy_refcounts; + +for (i =0 ; i <QCOW2_DISCARD_MAX ; i++) { + s->discard_passthrough[i] = r->discard_passthrough[i]; + } + + s->cache_clean_interval = r->cache_clean_interval; +cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); +} + +static void qcow2_update_options_abort (BlockDriverState *bs, +Qcow2ReopenState *r) +{ +if (r->l2_table_cache) { +qcow2_cache_destroy (bs, r->l2_table_cache); + } +if (r->refcount_block_cache) { +qcow2_cache_destroy (bs, r->refcount_block_cache); + } +} + +static int qcow2_update_options (BlockDriverState *bs,QDict *options, +int flags,Error **errp) +{ +Qcow2ReopenState r = {}; +int ret; + + ret =qcow2_update_options_prepare (bs, &r, options, flags, errp); +if (ret >=0 ) { +qcow2_update_options_commit (bs, &r); + }else { +qcow2_update_options_abort (bs, &r); + }return ret; }
Signature · 1 line
1.8.3.1
Re: [Qemu-devel] [PATCH v3 10/13] qcow2: Make qcow2_update_options() suitable for transactions
Quoted 7 lines · Kevin Wolf
Before we can allow updating options at runtime with
bdrv_reopen(), we need to split the function into prepare/commit/abort parts.Signed-off-by Kevin Wolf <[email protected]>--- block/qcow2.c | 113 +++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 73 insertions(+), 40 deletions(-)
PATCH v3 11/13 qcow2: Support updating driver-specific options in reopen
In reply to Kevin WolfFor updating the cache sizes or disabling lazy refcounts there is a bit more to do than just changing the variables, but otherwise we're all set for changing options during bdrv_reopen().
Just implement the missing pieces and hook the functions up in bdrv_reopen().
--- block/qcow2.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 72 insertions(+), 9 deletions(-)
block/qcow2.c +72 -9
@@ -649,7 +649,24 @@ static int qcow2_update_options_prepare(BlockDriverState *bs, goto fail; } -/* alloc L2 table/refcount block cache */ +/* alloc new L2 table/refcount block cache, flush old one */ +if (s->l2_table_cache) { + ret =qcow2_cache_flush (bs, s->l2_table_cache); +if (ret) { +error_setg_errno (errp, -ret,"Failed to flush the L2 table cache" ); + goto fail; + } + } + +if (s->refcount_block_cache) { + ret =qcow2_cache_flush (bs, s->refcount_block_cache); +if (ret) { +error_setg_errno (errp, -ret, +"Failed to flush the refcount block cache" ); + goto fail; + } + } + r->l2_table_cache =qcow2_cache_create (bs, l2_cache_size); r->refcount_block_cache =qcow2_cache_create (bs, refcount_cache_size);if (r->l2_table_cache ==NULL || r->refcount_block_cache ==NULL ) {
@@ -660,14 +677,15 @@ static int qcow2_update_options_prepare(BlockDriverState *bs,/* New interval for cache cleanup timer */ r->cache_clean_interval = -qemu_opt_get_number (opts,QCOW2_OPT_CACHE_CLEAN_INTERVAL ,0 ); +qemu_opt_get_number (opts,QCOW2_OPT_CACHE_CLEAN_INTERVAL , + s->cache_clean_interval);if (r->cache_clean_interval >UINT_MAX ) {error_setg (errp,"Cache clean interval too big" ); ret = -EINVAL ; goto fail; } -/* Enable lazy_refcounts according to image and command line options */ +/* lazy-refcounts; flush if going from enabled to disabled */ r->use_lazy_refcounts =qemu_opt_get_bool (opts,QCOW2_OPT_LAZY_REFCOUNTS , (s->compatible_features &QCOW2_COMPAT_LAZY_REFCOUNTS ));if (r->use_lazy_refcounts && s->qcow_version <3 ) {
@@ -677,6 +695,14 @@ static int qcow2_update_options_prepare(BlockDriverState *bs, goto fail; } +if (s->use_lazy_refcounts && !r->use_lazy_refcounts) { + ret =qcow2_mark_clean (bs); +if (ret <0 ) { +error_setg_errno (errp, -ret,"Failed to disable lazy refcounts" ); + goto fail; + } + } +/* Overlap check options */ opt_overlap_check =qemu_opt_get (opts,QCOW2_OPT_OVERLAP ); opt_overlap_check_template =qemu_opt_get (opts,QCOW2_OPT_OVERLAP_TEMPLATE );
@@ -741,6 +767,12 @@ static void qcow2_update_options_commit(BlockDriverState *bs,BDRVQcowState *s = bs->opaque;int i; +if (s->l2_table_cache) { +qcow2_cache_destroy (bs, s->l2_table_cache); + } +if (s->refcount_block_cache) { +qcow2_cache_destroy (bs, s->refcount_block_cache); + } s->l2_table_cache = r->l2_table_cache; s->refcount_block_cache = r->refcount_block_cache;
@@ -751,8 +783,11 @@ static void qcow2_update_options_commit(BlockDriverState *bs, s->discard_passthrough[i] = r->discard_passthrough[i]; } - s->cache_clean_interval = r->cache_clean_interval; -cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); +if (s->cache_clean_interval != r->cache_clean_interval) { +cache_clean_timer_del (bs); + s->cache_clean_interval = r->cache_clean_interval; +cache_clean_timer_init (bs,bdrv_get_aio_context (bs)); + } } static void qcow2_update_options_abort(BlockDriverState *bs,
@@ -1199,26 +1234,52 @@ static int qcow2_set_key(BlockDriverState *bs, const char *key)return 0 ; } -/* We have no actual commit/abort logic for qcow2, but we need to write out any -* unwritten data if we reopen read-only. */ static int qcow2_reopen_prepare (BDRVReopenState *state,BlockReopenQueue *queue,Error **errp) { +Qcow2ReopenState *r;int ret; + r =g_new0 (Qcow2ReopenState,1 ); + state->opaque = r; + + ret =qcow2_update_options_prepare (state->bs, r, state->options, + state->flags, errp); +if (ret <0 ) { + goto fail; + } + +/* We need to write out any unwritten data if we reopen read-only. */ if ((state->flags &BDRV_O_RDWR ) ==0 ) { ret =bdrv_flush (state->bs);if (ret <0 ) { -return ret; + goto fail; } ret =qcow2_mark_clean (state->bs);if (ret <0 ) { -return ret; + goto fail; } }return 0 ; + +fail: +qcow2_update_options_abort (state->bs, r); +g_free (r); +return ret; +} + +static void qcow2_reopen_commit (BDRVReopenState *state) +{ +qcow2_update_options_commit (state->bs, state->opaque); +g_free (state->opaque); +} + +static void qcow2_reopen_abort (BDRVReopenState *state) +{ +qcow2_update_options_abort (state->bs, state->opaque); +g_free (state->opaque); } static int64_t coroutine_fn qcow2_co_get_block_status(BlockDriverState *bs,
@@ -3082,6 +3143,8 @@ BlockDriver bdrv_qcow2 = { .bdrv_open = qcow2_open, .bdrv_close = qcow2_close, .bdrv_reopen_prepare = qcow2_reopen_prepare, + .bdrv_reopen_commit = qcow2_reopen_commit, + .bdrv_reopen_abort = qcow2_reopen_abort, .bdrv_create = qcow2_create, .bdrv_has_zero_init = bdrv_has_zero_init_1, .bdrv_co_get_block_status = qcow2_co_get_block_status,
Signature · 1 line
1.8.3.1
Re: [Qemu-devel] [PATCH v3 11/13] qcow2: Support updating driver-specific options in reopen
Quoted 1 line · Kevin Wolf
For updating the cache sizes or disabling lazy refcounts
And updating the cache clean timer, too.
Quoted 11 lines
there is a bit
more to do than just changing the variables, but otherwise we're all set for changing options duringbdrv_reopen().Just implement the missing pieces and hook the functions up in
bdrv_reopen().Signed-off-by Kevin Wolf <[email protected]>--- block/qcow2.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 72 insertions(+), 9 deletions(-)
Whether you mention it or not (can be fixed up when applying the patch, too):
PATCH v3 12/13 qemu-iotests: Reopen qcow2 with lazy-refcounts change
In reply to Kevin Wolf--- tests/qemu-iotests/039 | 27 +++++++++++++++++++++++++++ tests/qemu-iotests/039.out | 18 ++++++++++++++++++ 2 files changed, 45 insertions(+)
tests/qemu-iotests/039 +27 -0
@@ -147,6 +147,33 @@ $PYTHON qcow2.py "$TEST_IMG".base dump-header | grep incompatible_features _check_test_img TEST_IMG="$TEST_IMG".base _check_test_img +echo +echo "== Changing lazy_refcounts setting at runtime ==" + +IMGOPTS="compat=1.1,lazy_refcounts=off" +_make_test_img $size + +$QEMU_IO -c "reopen -o lazy-refcounts=on" \ + -c "write -P 0x5a 0 512" \ + -c "sigraise $(kill -l KILL)" "$TEST_IMG" 2>&1 \ + | _filter_qemu_io + +# The dirty bit must be set +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features +_check_test_img + +IMGOPTS="compat=1.1,lazy_refcounts=on" +_make_test_img $size + +$QEMU_IO -c "reopen -o lazy-refcounts=off" \ + -c "write -P 0x5a 0 512" \ + -c "sigraise $(kill -l KILL)" "$TEST_IMG" 2>&1 \ + | _filter_qemu_io + +# The dirty bit must not be set +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features +_check_test_img + # success, all done echo "*** done"
tests/qemu-iotests/039.out +18 -0
@@ -74,4 +74,22 @@ incompatible_features 0x0 incompatible_features 0x0 No errors were found on the image. No errors were found on the image. + +== Changing lazy_refcounts setting at runtime == +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 +wrote 512/512 bytes at offset 0 +512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +./common.config: Killed ( exec "$QEMU_IO_PROG" $QEMU_IO_OPTIONS "$@" ) +incompatible_features 0x1 +ERROR cluster 5 refcount=0 reference=1 +ERROR OFLAG_COPIED data cluster: l2_entry=8000000000050000 refcount=0 + +2 errors were found on the image. +Data may be corrupted, or further writes to the image may corrupt it. +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 +wrote 512/512 bytes at offset 0 +512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +./common.config: Killed ( exec "$QEMU_IO_PROG" $QEMU_IO_OPTIONS "$@" ) +incompatible_features 0x0 +No errors were found on the image. *** done
Signature · 1 line
1.8.3.1
PATCH v3 13/13 qemu-iotests: More qcow2 reopen tests
In reply to Kevin Wolf--- tests/qemu-iotests/137 | 145 +++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/137.out | 42 +++++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 188 insertions(+) create mode 100755 tests/qemu-iotests/137 create mode 100644 tests/qemu-iotests/137.out
tests/qemu-iotests/137 new file +145 -0
@@ -0,0 +1,145 @@ +#!/bin/bash +# +# Test qcow2 reopen +# +# Copyright (C) 2015 Red Hat, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# creator [email protected] + +seq="$(basename $0)" +echo "QA output created by $seq" + +here="$PWD" +tmp=/tmp/$$ +status=1 # failure is the default! + +_cleanup() +{ + _cleanup_test_img +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common.rc +. ./common.filter +. ./common.qemu + +_supported_fmt qcow2 +_supported_proto generic +_supported_os Linux + + +_make_test_img 64M + +echo === Try setting valid values for all options === +echo + +# Try all options and then check that all of the basic I/O operations still +# work on this image. +$QEMU_IO \ + -c "reopen -o lazy-refcounts=on,pass-discard-request=on" \ + -c "reopen -o lazy-refcounts=off,pass-discard-request=off" \ + -c "reopen -o pass-discard-snapshot=on,pass-discard-other=on" \ + -c "reopen -o pass-discard-snapshot=off,pass-discard-other=off" \ + -c "reopen -o overlap-check=all" \ + -c "reopen -o overlap-check=none" \ + -c "reopen -o overlap-check=cached" \ + -c "reopen -o overlap-check=constant" \ + -c "reopen -o overlap-check.template=all" \ + -c "reopen -o overlap-check.template=none" \ + -c "reopen -o overlap-check.template=cached" \ + -c "reopen -o overlap-check.template=constant" \ + -c "reopen -o overlap-check.main-header=on" \ + -c "reopen -o overlap-check.main-header=off" \ + -c "reopen -o overlap-check.active-l1=on" \ + -c "reopen -o overlap-check.active-l1=off" \ + -c "reopen -o overlap-check.active-l2=on" \ + -c "reopen -o overlap-check.active-l2=off" \ + -c "reopen -o overlap-check.refcount-table=on" \ + -c "reopen -o overlap-check.refcount-table=off" \ + -c "reopen -o overlap-check.refcount-block=on" \ + -c "reopen -o overlap-check.refcount-block=off" \ + -c "reopen -o overlap-check.snapshot-table=on" \ + -c "reopen -o overlap-check.snapshot-table=off" \ + -c "reopen -o overlap-check.inactive-l1=on" \ + -c "reopen -o overlap-check.inactive-l1=off" \ + -c "reopen -o overlap-check.inactive-l2=on" \ + -c "reopen -o overlap-check.inactive-l2=off" \ + -c "reopen -o cache-size=1M" \ + -c "reopen -o l2-cache-size=512k" \ + -c "reopen -o refcount-cache-size=128k" \ + -c "reopen -o cache-clean-interval=5" \ + -c "reopen -o cache-clean-interval=0" \ + -c "reopen -o cache-clean-interval=10" \ + \ + -c "write -P 55 0 32M" \ + -c "read -P 55 0 32M" \ + -c "discard 0 32M" \ + -c "write -z 0 32M" \ + -c "read -P 0 0 32M" \ + \ + "$TEST_IMG" | _filter_qemu_io + + +echo +echo === Try setting some invalid values === +echo + +$QEMU_IO \ + -c "reopen -o lazy-refcounts=42" \ + -c "reopen -o cache-size=1M,l2-cache-size=64k,refcount-cache-size=64k" \ + -c "reopen -o cache-size=1M,l2-cache-size=2M" \ + -c "reopen -o cache-size=1M,refcount-cache-size=2M" \ + -c "reopen -o l2-cache-size=256T" \ + -c "reopen -o refcount-cache-size=256T" \ + -c "reopen -o overlap-check=constant,overlap-check.template=all" \ + -c "reopen -o overlap-check=blubb" \ + -c "reopen -o overlap-check.template=blubb" \ + -c "reopen -o cache-clean-interval=-1" \ + "$TEST_IMG" | _filter_qemu_io + +echo +echo === Test transaction semantics === +echo + +# Whether lazy-refcounts was actually enabled can easily be tested: Check if +# the dirty bit is set after a crash +$QEMU_IO \ + -c "reopen -o lazy-refcounts=on,overlap-check=blubb" \ + -c "write -P 0x5a 0 512" \ + -c "sigraise $(kill -l KILL)" \ + "$TEST_IMG" 2>&1 | _filter_qemu_io + +# The dirty bit must not be set +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +# Similarly we can test whether corruption detection has been enabled: +# Create L1/L2, overwrite first entry in refcount block, allocate something. +# Disabling the checks should fail, so the corruption must be detected. +_make_test_img 64M +$QEMU_IO -c "write 0 64k" "$TEST_IMG" | _filter_qemu_io +poke_file "$TEST_IMG" "$((0x20000))" "\x00\x00" +$QEMU_IO \ + -c "reopen -o overlap-check=none,lazy-refcounts=42" \ + -c "write 64k 64k" \ + "$TEST_IMG" 2>&1 | _filter_qemu_io + +# success, all done +echo '*** done' +rm -f $seq.full +status=0
tests/qemu-iotests/137.out new file +42 -0
42 lines not on this page · raw message
tests/qemu-iotests/group +1 -0
@@ -134,3 +134,4 @@ 132 rw auto quick 134 rw auto quick 135 rw auto +137 rw auto
Signature · 1 line
1.8.3.1
Re: [Qemu-devel] [PATCH v3 13/13] qemu-iotests: More qcow2 reopen tests
Quoted 8 lines · Kevin Wolf
Signed-off-by Kevin Wolf <[email protected]>--- tests/qemu-iotests/137 | 145 +++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/137.out | 42 +++++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 188 insertions(+) create mode 100755 tests/qemu-iotests/137 create mode 100644 tests/qemu-iotests/137.out