This series adds an ability to use pl01x for early debug output.
v2 cover This series adds an ability to use pl01x for early debug output.
This is the version 2 of the patch I posted at
http://lists.denx.de/pipermail/u-boot/2015-September/227210.html
Changes in v2:
- Broke down into 2 patches
- Minor changes to accomodate Kconfig options
- Broke down into 2 patches
- Made CONFIG_DEBUG_UART_PL010 and CONFIG_DEBUG_UART_PL011 separate options
- Typo fixes
Sergey Temerkhanov (2):
arm: serial: Add debug UART capability to the pl01x driver
arm: serial: Add Kconfig entries to facilitate usage of the pl01x
driver for early debug output
drivers/serial/Kconfig | 22 ++++++++++++++++++++++ drivers/serial/serial_pl01x.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+)
Signature · 1 line
2.2.0
PATCH v2 1/2 arm: serial: Add debug UART capability to the pl01x driver
This patch adds an ability to use pl01x as a debug UART. It must be configured like other types of debug UARTs
---
Changes in v2:
- Broke down into 2 patches
- Minor changes to accomodate Kconfig options
drivers/serial/serial_pl01x.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/serial/serial_pl01x.c +28 -0
@@ -391,3 +391,31 @@ U_BOOT_DRIVER(serial_pl01x) = { };#endif + +#if defined(CONFIG_DEBUG_UART_PL010 ) || defined(CONFIG_DEBUG_UART_PL011 ) + +#include <debug_uart.h> + +void debug_uart_init (void ) +{ +#ifndef CONFIG_DEBUG_UART_SKIP_INIT +struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE ; +enum pl01x_type type =CONFIG_IS_ENABLED (DEBUG_UART_PL011 ) ? +TYPE_PL011 :TYPE_PL010 ; + +pl01x_generic_serial_init (regs, type); +pl01x_generic_setbrg (regs, type, +CONFIG_DEBUG_UART_CLOCK ,CONFIG_BAUDRATE ); +#endif +} + +static inline void _debug_uart_putc (int ch) +{ +struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE ; + +pl01x_putc (regs, ch); +} + +DEBUG_UART_FUNCS + +#endif
Signature · 1 line
2.2.0
PATCH v2 1/2 arm: serial: Add debug UART capability to the pl01x driver
Quoted 6 lines · Sergey Temerkhanov
This patch adds an ability to use pl01x as a debug UART. It must be configured like other types of debug UARTs
Signed-off-by Sergey Temerkhanov <[email protected]>Signed-off-by Radha Mohan Chintakuntla <[email protected]>
Quoted 8 lines
---
Changes in v2:
- Broke down into 2 patches
- Minor changes to accomodateKconfigoptionsdrivers/serial/serial_pl01x.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
PATCH v2 2/2 arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output
In reply to Sergey TemerkhanovThis patch adds Kconfig entries to facilitate usage of pl01x as a debug UART.
---
Changes in v2:
- Broke down into 2 patches
- Made CONFIG_DEBUG_UART_PL010 and CONFIG_DEBUG_UART_PL011 separate options
- Typo fixes
drivers/serial/Kconfig | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
drivers/serial/Kconfig +22 -0
@@ -77,6 +77,22 @@ config DEBUG_UART_S5P will need to provide parameters to make this work. The driver will be available until the real driver-model serial is running. +config DEBUG_UART_PL010 + bool "pl010" + help + Select this to enable a debug UART using the pl01x driver with the + PL010 UART type. You will need to provide parameters to make this + work. The driver will be available until the real driver model + serial is running. + +config DEBUG_UART_PL011 + bool "pl011" + help + Select this to enable a debug UART using the pl01x driver with the + PL011 UART type. You will need to provide parameters to make this + work. The driver will be available until the real driver model + serial is running. + endchoice config DEBUG_UART_BASE
@@ -109,6 +125,12 @@ config DEBUG_UART_SHIFT value. Use this value to specify the shift to use, where 0=byte registers, 2=32-bit word registers, etc. +config DEBUG_UART_SKIP_INIT + bool "Skip UART initialization" + help + Select this if the UART you want to use for debug output is already + initialized by the time U-Boot starts its execution. + config ROCKCHIP_SERIAL bool "Rockchip on-chip UART support" depends on ARCH_UNIPHIER && DM_SERIAL
Signature · 1 line
2.2.0
PATCH v2 2/2 arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output
Quoted 8 lines · Sergey Temerkhanov
This patch adds
Kconfigentries to facilitate usage of pl01x as a debug UART.Signed-off-by Sergey Temerkhanov <[email protected]>Signed-off-by Radha Mohan Chintakuntla <[email protected]>---
Quoted 8 lines
Changes in v2:
- Broke down into 2 patches
- MadeCONFIG_DEBUG_UART_PL010andCONFIG_DEBUG_UART_PL011separate options
- Typo fixesdrivers/serial/Kconfig | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)