Skip to contentSkip to conversation

This series adds an ability to use pl01x for early debug output.

PATCH Superseded Sergey Temerkhanov 2 participants 5 messages Sep 9, 2015 – Sep 10, 2015

lore
Share & tools
lore
#0 lore raw

v2 cover This series adds an ability to use pl01x for early debug output.

This is the version 2 of the patch I posted at

http://lists.denx.de/pipermail/u-boot/2015-September/227210.html

Changes in v2:
- Broke down into 2 patches
- Minor changes to accomodate Kconfig options
- Broke down into 2 patches
- Made CONFIG_DEBUG_UART_PL010 and CONFIG_DEBUG_UART_PL011 separate options
- Typo fixes

Sergey Temerkhanov (2):
arm: serial: Add debug UART capability to the pl01x driver
arm: serial: Add Kconfig entries to facilitate usage of the pl01x
driver for early debug output

 drivers/serial/Kconfig        | 22 ++++++++++++++++++++++
 drivers/serial/serial_pl01x.c | 28 ++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+)
Signature · 1 line
2.2.0
#1 lore raw

PATCH v2 1/2 arm: serial: Add debug UART capability to the pl01x driver

This patch adds an ability to use pl01x as a debug UART. It must be configured like other types of debug UARTs

---

Changes in v2:
- Broke down into 2 patches
- Minor changes to accomodate Kconfig options

 drivers/serial/serial_pl01x.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/serial/serial_pl01x.c +28 -0
index e6ceaa1..e83a44c 100644
@@ -391,3 +391,31 @@ U_BOOT_DRIVER(serial_pl01x) = {
 };
 
 #endif
+
+#if defined(CONFIG_DEBUG_UART_PL010) || defined(CONFIG_DEBUG_UART_PL011)
+
+#include <debug_uart.h>
+
+void debug_uart_init(void)
+{
+#ifndef CONFIG_DEBUG_UART_SKIP_INIT
+	struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
+	enum pl01x_type type = CONFIG_IS_ENABLED(DEBUG_UART_PL011) ?
+				TYPE_PL011 : TYPE_PL010;
+
+	pl01x_generic_serial_init(regs, type);
+	pl01x_generic_setbrg(regs, type,
+			     CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
+#endif
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+	struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
+
+	pl01x_putc(regs, ch);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
Signature · 1 line
2.2.0
#2 lore raw

PATCH v2 1/2 arm: serial: Add debug UART capability to the pl01x driver

Quoted 6 lines · Sergey Temerkhanov

This patch adds an ability to use pl01x as a debug UART. It must be configured like other types of debug UARTs

Quoted 8 lines

---

Changes in v2:
- Broke down into 2 patches
- Minor changes to accomodate Kconfig options

 drivers/serial/serial_pl01x.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
#3 lore raw

PATCH v2 2/2 arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output

In reply to Sergey Temerkhanov

This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART.

---

Changes in v2:
- Broke down into 2 patches
- Made CONFIG_DEBUG_UART_PL010 and CONFIG_DEBUG_UART_PL011 separate options
- Typo fixes

 drivers/serial/Kconfig | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
drivers/serial/Kconfig +22 -0
index ccb80d2..539783b 100644
@@ -77,6 +77,22 @@ config DEBUG_UART_S5P
 	  will need to provide parameters to make this work. The driver will
 	  be available until the real driver-model serial is running.
 
+config DEBUG_UART_PL010
+	bool "pl010"
+	help
+	  Select this to enable a debug UART using the pl01x driver with the
+	  PL010 UART type. You will need to provide parameters to make this
+	  work. The driver will be available until the real driver model
+	  serial is running.
+
+config DEBUG_UART_PL011
+	bool "pl011"
+	help
+	  Select this to enable a debug UART using the pl01x driver with the
+	  PL011 UART type. You will need to provide parameters to make this
+	  work. The driver will be available until the real driver model
+	  serial is running.
+
 endchoice
 
 config DEBUG_UART_BASE
@@ -109,6 +125,12 @@ config DEBUG_UART_SHIFT
 	  value. Use this value to specify the shift to use, where 0=byte
 	  registers, 2=32-bit word registers, etc.
 
+config DEBUG_UART_SKIP_INIT
+	bool "Skip UART initialization"
+	help
+	  Select this if the UART you want to use for debug output is already
+	  initialized by the time U-Boot starts its execution.
+
 config ROCKCHIP_SERIAL
 	bool "Rockchip on-chip UART support"
 	depends on ARCH_UNIPHIER && DM_SERIAL
Signature · 1 line
2.2.0
#4 lore raw

PATCH v2 2/2 arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output

Quoted 8 lines · Sergey Temerkhanov

This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART.

---

Quoted 8 lines

Changes in v2:
- Broke down into 2 patches
- Made CONFIG_DEBUG_UART_PL010 and CONFIG_DEBUG_UART_PL011 separate options
- Typo fixes

 drivers/serial/Kconfig | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)