ARM: dts: sun5i: Add emac_pins_b definition
Subsystems (3)
PATCH 1/2 ARM: dts: sun5i: Add emac_pins_b definition
From: Jelle van der Waa <[email protected]>
The emac pins on an A10s can also be routed to the outside through PORTD rather then through PORTA, add a pinctrl node for this.
--- arch/arm/boot/dts/sun5i-a10s.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm/boot/dts/sun5i-a10s.dtsi +11 -0
@@ -215,6 +215,17 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + emac_pins_b: emac0 at 1 { + allwinner,pins = "PD6", "PD7", "PD10", + "PD11", "PD12", "PD13", "PD14", + "PD15", "PD18", "PD19", "PD20", + "PD21", "PD22", "PD23", "PD24", + "PD25", "PD26", "PD27"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc1_pins_a: mmc1 at 0 { allwinner,pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8";
Signature · 1 line
2.4.3
PATCH 2/2 ARM: dts: sun5i: Add dts file for the Wobo i5 top set box
From: Jelle van der Waa <[email protected]>
The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller.
This commit adds a dts file adding support for this top set box.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 224 +++++++++++++++++++++++++++++++ 2 files changed, 225 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -571,6 +571,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a10s-wobo-i5.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts new file +224 -0
224 lines not on this page · raw message
Signature · 1 line
2.4.3
Maxime Ripard
AppliedPATCH 2/2 ARM: dts: sun5i: Add dts file for the Wobo i5 top set box
Quoted 11 lines · Hans de Goede
From: Jelle van der Waa <[email protected]>
The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller.
This commit adds a dts file adding support for this top set box.
Signed-off-by Jelle van der Waa <[email protected]>Signed-off-by Hans de Goede <[email protected]>
Applied both, thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150913/6288ee7f/attachment.sig>