Skip to contentSkip to conversation

ARM: dts: sun5i: Add emac_pins_b definition

PATCH New Hans de Goede 2 participants 3 messages Sep 10, 2015 – Sep 13, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ARM: dts: sun5i: Add emac_pins_b definition

From: Jelle van der Waa <[email protected]>

The emac pins on an A10s can also be routed to the outside through PORTD rather then through PORTA, add a pinctrl node for this.

---
 arch/arm/boot/dts/sun5i-a10s.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)
arch/arm/boot/dts/sun5i-a10s.dtsi +11 -0
index 6ff2139..45ca0c5 100644
@@ -215,6 +215,17 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	emac_pins_b: emac0 at 1 {
+		allwinner,pins = "PD6", "PD7", "PD10",
+				"PD11", "PD12", "PD13", "PD14",
+				"PD15", "PD18", "PD19", "PD20",
+				"PD21", "PD22", "PD23", "PD24",
+				"PD25", "PD26", "PD27";
+		allwinner,function = "emac";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	mmc1_pins_a: mmc1 at 0 {
 		allwinner,pins = "PG3", "PG4", "PG5",
 				 "PG6", "PG7", "PG8";
Signature · 1 line
2.4.3
#1 lore raw

PATCH 2/2 ARM: dts: sun5i: Add dts file for the Wobo i5 top set box

From: Jelle van der Waa <[email protected]>

The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller.

This commit adds a dts file adding support for this top set box.

---
 arch/arm/boot/dts/Makefile               |   1 +
 arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 224 +++++++++++++++++++++++++++++++
 2 files changed, 225 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
arch/arm/boot/dts/Makefile +1 -0
index 87c768b..1034922 100644
@@ -571,6 +571,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts new file +224 -0

224 lines not on this page · raw message

Signature · 1 line
2.4.3
#2 lore raw

PATCH 2/2 ARM: dts: sun5i: Add dts file for the Wobo i5 top set box

Quoted 11 lines · Hans de Goede

From: Jelle van der Waa <[email protected]>

The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller.

This commit adds a dts file adding support for this top set box.

Applied both, thanks!

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150913/6288ee7f/attachment.sig>