microzed: add Avnet Microzed support
PATCH v2 1/1 microzed: add Avnet Microzed support
Changes are based on Zedboard: Xilinx does not provide a specific DTS for Microzed in the kernel tree. It is suggested [1] to use the zynq-zed.dts and change the RAM size
[1] https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856
---
Changes v1 -> v2:
- Mention reason for using Zedboard DTS (Jan Viktorin)
- remove unnecessary spaces from board/avnet/microzed/readme.txt
board/avnet/microzed/readme.txt | 65 ++++++++++++++++++++++ ...eate-microzed-specific-U-Boot-environment.patch | 34 +++++++++++ configs/microzed_defconfig | 26 +++++++++ 3 files changed, 125 insertions(+) create mode 100644 board/avnet/microzed/readme.txt create mode 100644 board/avnet/microzed/uboot/0001-zynq-Create-microzed-specific-U-Boot-environment.patch create mode 100644 configs/microzed_defconfig
board/avnet/microzed/readme.txt new file +65 -0
@@ -0,0 +1,65 @@ +This is the buildroot board support for the Avnet Microzed. The Microzed is +a development board based on the Xilinx Zynq-7000 based All-Programmable +System-On-Chip. + +Microzed information including schematics, reference designs, and manuals are +available from http://www.zedboard.org . + +Steps to create a working system for Microzed: + +1) make microzed_defconfig +2) make +3) copy files BOOT.BIN, u-boot-dtb.img, rootfs.cpio.uboot, + uImage, zynq-zed.dtb into your SD card +4) boot your Microzed + +The expected output: + + U-Boot SPL 2015.07 (Sep 15 2015 - 16:10:56) + mmc boot + reading system.dtb + spl_load_image_fat_os: error reading image system.dtb, err - -1 + reading u-boot-dtb.img + reading u-boot-dtb.img + + + U-Boot 2015.07 (Sep 15 2015 - 16:10:56 +0200) + + Model: Zynq MicroZED Board + I2C: ready + DRAM: ECC disabled 1 GiB + MMC: zynq_sdhci: 0 + Using default environment + ... + +When using an older U-Boot then 2015.07, a working ps7_init.c +file is required to be installed into the U-Boot directory +structure. From 2015.07, the major Zynq-based boards are +supported without any manual intervention. + +Resulting system +---------------- +A FAT32 partition should be created at the beginning of the SD Card +and the following files should be installed: + /BOOT.BIN + /zynq-zed.dtb + /uImage + /rootfs-cpio.uboot + /u-boot-dtb.img + + +All needed files can be taken from output/images/ + +BOOT.BIN, uImage and u-boot-dtb.img are direct copies of the same files +available on output/images/ + +There is a patch attached that redefines the U-Boot's environment +to work with Buildroot out-of-the-box. + +You can alter the booting procedure by creating a file uEnv.txt +in the root of the SD card. It is a plain text file in format +<key>=<value> one per line: + +kernel_image=myimage +modeboot=myboot +myboot=...
board/avnet/microzed/uboot/0001-zynq-Create-microzed-specific-U-Boot-environment.patch new file +34 -0
@@ -0,0 +1,34 @@ +This is a copy of the patch supplied for Zedboard + +--- a/include/configs/zynq_microzed.h 2015-07-14 19:32:21.000000000 +0200 ++++ b/include/configs/zynq_microzed.h 2015-09-02 12:19:35.728503472 +0200 +@@ -22,4 +22,29 @@ + + #include <configs/zynq-common.h> + ++#undef CONFIG_EXTRA_ENV_SETTINGS ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "envload=mmc info && if fatload mmc 0 0x1000 uEnv.txt;"\ ++ " then echo Importing uEnv.txt; env import -t 0x1000" \ ++ " $filesize; fi;\0" \ ++ "bootcmd=run $modeboot\0" \ ++ "modeboot=sdboot\0" \ ++ "baudrate=115200\0" \ ++ "bootenv=uEnv.txt\0" \ ++ "devicetree_image=zynq-zed.dtb\0" \ ++ "kernel_image=uImage\0" \ ++ "ramdisk_image=rootfs.cpio.uboot\0" \ ++ "fpga_image=system.bit\0" \ ++ "sdboot=echo Booting from SD...;" \ ++ " run envload; run fpgaboot;" \ ++ " fatload mmc 0 0x1000000 ${kernel_image}" \ ++ " && fatload mmc 0 0x2000000 ${ramdisk_image}" \ ++ " && fatload mmc 0 0x3000000 ${devicetree_image}" \ ++ " && bootm 0x1000000 0x2000000 0x3000000\0" \ ++ "fpgaboot=if fatload mmc 0 0x1000000 ${fpga_image};" \ ++ " then echo Booting FPGA from ${fpga_image};" \ ++ " fpga info 0 && fpga loadb 0 0x1000000 $filesize;" \ ++ " else echo FPGA image ${fpga_image} was not found," \ ++ " skipping...; fi;\0" ++ + #endif /* __CONFIG_ZYNQ_MICROZED_H */
configs/microzed_defconfig new file +26 -0
@@ -0,0 +1,26 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y +BR2_KERNEL_HEADERS_VERSION=y +BR2_DEFAULT_KERNEL_VERSION="3.8" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_8=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/Xilinx/linux-xlnx.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="xilinx-v2015.1" +BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zed" +BR2_TARGET_ROOTFS_CPIO=y +BR2_TARGET_ROOTFS_CPIO_GZIP=y +BR2_TARGET_ROOTFS_CPIO_UIMAGE=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="zynq_microzed" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.07" +BR2_TARGET_UBOOT_PATCH="$(TOPDIR)/board/avnet/microzed/uboot" +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_ZYNQ_IMAGE=y
Signature · 1 line
2.1.4
Thomas Petazzoni
AppliedPATCH v2 1/1 microzed: add Avnet Microzed support
Dear Davide Viti,
Quoted 12 lines · Davide Viti
Changes are based on Zedboard: Xilinx does not provide a specific DTS for Microzed in the kernel tree. It is suggested [1] to use the
zynq-zed.dtsand change the RAM size[1] https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856
Signed-off-by Davide Viti <[email protected]>---
Changes v1 -> v2:
- Mention reason for using Zedboard DTS (Jan Viktorin)
- remove unnecessary spaces fromboard/avnet/microzed/readme.txt
Quoted 7 lines
board/avnet/microzed/readme.txt | 65 ++++++++++++++++++++++ ...eate-microzed-specific-U-Boot-environment.patch | 34 +++++++++++ configs/microzed_defconfig | 26 +++++++++ 3 files changed, 125 insertions(+) create mode 100644 board/avnet/microzed/readme.txt create mode 100644 board/avnet/microzed/uboot/0001-zynq-Create-microzed-specific-U-Boot-environment.patch create mode 100644 configs/microzed_defconfig
Thanks, applied, after doing some minor tweaks:
[Thomas:
- extend readme.txt to indicate why the same DTB is used for Microzed and the Zedboard.
- add a description + Signed-off-by line in the 0001-zynq-Create-microzed-specific-U-Boot-environment.patch, by re-using the description of the same patch for the Zedboard.]
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com