Skip to contentSkip to conversation

usb: misc: usb3503: Describe better how to bind clock to the hub

PATCH Applied Michael Trimarchi 2 participants 2 messages Nov 15, 2015 – Nov 25, 2015 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 usb: misc: usb3503: Describe better how to bind clock to the hub

---
 Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/usb/usb3503.txt +4 -1
index 52493b1..c1a0a91 100644
@@ -18,7 +18,8 @@ Optional properties:
 - refclk: Clock used for driving REFCLK signal (optional, if not provided
 	the driver assumes that clock signal is always available, its
 	rate is specified by REF_SEL pins and a value from the primary
-	reference clock frequencies table is used)
+	reference clock frequencies table is used). Use clocks and
+	clock-names in order to assign it
 - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL
 	pins (optional, if not provided, driver will not set rate of the
 	REFCLK signal and assume that a value from the primary reference
@@ -33,4 +34,6 @@ Examples:
 		intn-gpios = <&gpx3 4 1>;
 		reset-gpios = <&gpx3 5 1>;
 		initial-mode = <1>;
+		clocks = <&clks 80>;
+		clock-names = "refclk";
 	};
Signature · 6 lines
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 1447584528-12411-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org

Applied
#2 lore raw
Quoted 1 line · Michael Trimarchi

Applied, thanks.

Rob

Quoted 28 lines
---
 Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/usb/usb3503.txt +4 -1
index 52493b1..c1a0a91 100644
@@ -18,7 +18,8 @@ Optional properties:
 - refclk: Clock used for driving REFCLK signal (optional, if not provided
 	the driver assumes that clock signal is always available, its
 	rate is specified by REF_SEL pins and a value from the primary
-	reference clock frequencies table is used)
+	reference clock frequencies table is used). Use clocks and
+	clock-names in order to assign it
 - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL
 	pins (optional, if not provided, driver will not set rate of the
 	REFCLK signal and assume that a value from the primary reference
@@ -33,4 +34,6 @@ Examples:
 		intn-gpios = <&gpx3 4 1>;
 		reset-gpios = <&gpx3 5 1>;
 		initial-mode = <1>;
+		clocks = <&clks 80>;
+		clock-names = "refclk";
 	};
Signature · 1 line
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html