usb: misc: usb3503: Describe better how to bind clock to the hub
Subsystems (2)
PATCH 1/1 usb: misc: usb3503: Describe better how to bind clock to the hub
--- Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/usb/usb3503.txt +4 -1
@@ -18,7 +18,8 @@ Optional properties: - refclk: Clock used for driving REFCLK signal (optional, if not provided the driver assumes that clock signal is always available, its rate is specified by REF_SEL pins and a value from the primary - reference clock frequencies table is used) + reference clock frequencies table is used). Use clocks and + clock-names in order to assign it - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL pins (optional, if not provided, driver will not set rate of the REFCLK signal and assume that a value from the primary reference
@@ -33,4 +34,6 @@ Examples: intn-gpios = <&gpx3 4 1>; reset-gpios = <&gpx3 5 1>; initial-mode = <1>; + clocks = <&clks 80>; + clock-names = "refclk"; };
Signature · 6 lines
2.6.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 1447584528-12411-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Rob Herring
AppliedQuoted 1 line · Michael Trimarchi
Applied, thanks.
Rob
Quoted 28 lines
--- Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Documentation/devicetree/bindings/usb/usb3503.txt +4
-1@@ -18,7 +18,8 @@ Optional properties: - refclk: Clock used for driving REFCLK signal (optional, if not provided the driver assumes that clock signal is always available, its rate is specified by REF_SEL pins and a value from the primary - reference clock frequencies table is used) + reference clock frequencies table is used). Use clocks and + clock-names in order to assign it - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL pins (optional, if not provided, driver will not set rate of the REFCLK signal and assume that a value from the primary reference@@ -33,4 +34,6 @@ Examples: intn-gpios = <&gpx3 4 1>; reset-gpios = <&gpx3 5 1>; initial-mode = <1>; + clocks = <&clks 80>; + clock-names = "refclk"; };Signature · 1 line
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html