Skip to contentSkip to conversation

Error reporting cleanups and fixes

PATCH In review Markus Armbruster 4 participants 31 messages Dec 18, 2015 – Jan 4, 2016

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v3 cover Error reporting cleanups and fixes

Two topics:

1. Avoid error_get_pretty() when all you want is extend an error message. Doing that with error_get_pretty() loses the error hint. Provide that don't lose it, and are more convenient to use.

2. Newlines in error messages. Jason Herne's "[PATCH v2] checkpatch:
Detect newlines in error_report and other error functions" will catch at least some instances of this kind of mistake in the future.

Based on my "[PATCH v3 00/13] Clean up some hw_error() misuse".

I intend to take these patches through my tree.

v3:
* PATCH 01+11: Commit messages improved, bad Coccinelle like breaks cleaned up [Eric]
* PATCH 02-04+09+12-14+17: Commit messages improved [Eric]
* PATCH 05: Cover a bit more ground in comments [Eric]
* PATCH 16+21: Fix three more instances [Eric]
* PATCH 18: Style fix [Fam]
* PATCH 24: New
v2:
* 19 new patches...
* PATCH 1 became PATCH 16
* PATCH 2 became PATCH 21, with commit message typo fixed [László]
* PATCH 3 split into PATCH 17-20, partly rewritten
* PATCH 4 became PATCH 22

Markus Armbruster (24):
qemu-nbd: Replace BSDism <err.h> by error_report()
error: Use error_report_err() where appropriate (again)
error: Use error_report_err() instead of monitor_printf()
error: Use error_report_err() instead of ad hoc prints
error: Improve documentation
block: Clean up "Could not create temporary overlay" error message
qemu-nbd: Clean up "Failed to load snapshot" error message
test-throttle: Simplify qemu_init_main_loop() error handling
error: New error_prepend(), error_reportf_err()
error: Don't decorate original error message when adding to it
error: Use error_reportf_err() where it makes obvious sense
error: Use error_prepend() where it makes obvious sense
spapr: Use error_reportf_err()
migration: Use error_reportf_err() instead of monitor_printf() qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
error: Strip trailing '\n' from error string arguments (again)
vmdk: Clean up control flow in vmdk_parse_extents() a bit
vmdk: Clean up "Invalid extent lines" error message
pci-assign: Clean up "Failed to assign" error messages
vhdx: Fix "log that needs to be replayed" error message
error: Clean up errors with embedded newlines (again) hw/s390x: Rename local variables Error *l_err to just err s390/sclp: Simplify control flow in sclp_realize()
error: Consistently name Error * objects err, and not errp

 arch_init.c                        |   4 +-
 block.c                            |  20 +++---
 block/qcow2.c                      |   5 +-
 block/qed.c                        |   5 +-
 block/sheepdog.c                   |   8 +--
 block/vhdx-log.c                   |  13 ++--
 block/vmdk.c                       |  50 +++++++++------
 blockdev.c                         |  12 ++--
 contrib/ivshmem-server/main.c      |  10 ++-
 hmp.c                              |  61 ++++++++----------
 hw/arm/cubieboard.c                |   9 ++-
 hw/arm/digic_boards.c              |   3 +-
 hw/arm/imx25_pdk.c                 |   2 +-
 hw/arm/kzm.c                       |   2 +-
 hw/arm/netduino2.c                 |   2 +-
 hw/arm/xlnx-ep108.c                |   2 +-
 hw/arm/xlnx-zynqmp.c               |   2 +-
 hw/block/dataplane/virtio-blk.c    |   8 +--
 hw/core/nmi.c                      |  10 +--
 hw/core/qdev-properties.c          |   6 +-
 hw/core/qdev.c                     |   5 +-
 hw/i386/kvm/pci-assign.c           |  16 ++---
 hw/i386/pc.c                       |   9 ++-
 hw/ppc/e500.c                      |   4 +-
 hw/ppc/spapr.c                     |  10 +--
 hw/ppc/spapr_drc.c                 |   6 +-
 hw/s390x/ipl.c                     |  12 ++--
 hw/s390x/s390-skeys-kvm.c          |   2 +-
 hw/s390x/s390-skeys.c              |  19 +++---
 hw/s390x/sclp.c                    |  21 +++---
 hw/scsi/vhost-scsi.c               |   6 +-
 hw/tpm/tpm_tis.c                   |   2 +-
 hw/usb/bus.c                       |  11 ++--
 include/qapi/error.h               |  51 +++++++++++++--
 include/qemu/sockets.h             |   2 +-
 kvm-all.c                          |   6 +-
 migration/ram.c                    |   2 +-
 migration/savevm.c                 |  21 +++---
 monitor.c                          |   6 +-
 net/vhost-user.c                   |   6 +-
 qdev-monitor.c                     |   3 +-
 qemu-img.c                         |  33 ++++------
 qemu-io.c                          |   8 +--
 qemu-nbd.c                         | 128 ++++++++++++++++++++++---------------
 qga/commands-posix.c               |   2 +-
 replay/replay.c                    |   3 +-
 target-arm/cpu.c                   |   2 +-
 target-arm/machine.c               |   4 +-
 tests/qemu-iotests/059.out         |  12 ++--
 tests/qemu-iotests/060.out         |   2 +-
 tests/qemu-iotests/069.out         |   2 +-
 tests/qemu-iotests/070.out         |   5 +-
 tests/qemu-iotests/075.out         |  14 ++--
 tests/qemu-iotests/076.out         |   6 +-
 tests/qemu-iotests/078.out         |  12 ++--
 tests/qemu-iotests/080.out         |  36 +++++------
 tests/qemu-iotests/083.out         |  34 +++++-----
 tests/qemu-iotests/088.out         |  12 ++--
 tests/qemu-iotests/092.out         |  24 +++----
 tests/qemu-iotests/103.out         |   8 +--
 tests/qemu-iotests/114.out         |   2 +-
 tests/qemu-iotests/116.out         |  14 ++--
 tests/qemu-iotests/131.out         |   2 +-
 tests/test-aio.c                   |   4 +-
 tests/test-string-output-visitor.c |   6 +-
 tests/test-thread-pool.c           |   4 +-
 tests/test-throttle.c              |  15 +----
 ui/vnc.c                           |   4 +-
 util/error.c                       |  35 +++++++++-
 util/qemu-error.c                  |   8 +--
 vl.c                               |   8 +--
 71 files changed, 467 insertions(+), 436 deletions(-)
Signature · 1 line
2.4.3
#1 lore raw

PATCH v3 1/24 qemu-nbd: Replace BSDism <err.h> by error_report()

Coccinelle semantic patch

    @@
    expression E;
    expression list ARGS;
    @@
    -       errx(E, ARGS);
    +       error_report(ARGS);
    +       exit(E);
    @@
    expression E, FMT;
    expression list ARGS;
    @@
    -       err(E, FMT, ARGS);
    +       error_report(FMT /*": %s"*/, ARGS, strerror(errno));
    +       exit(E);

followed by a replace of '"/*": %s"*/' by ' : %s"', because I can't figure out how to make Coccinelle transform strings.

A few of the error messages touched have trailing newlines. They'll be stripped later in this series.

---
 qemu-nbd.c | 121 +++++++++++++++++++++++++++++++++++++++----------------------
 1 file changed, 77 insertions(+), 44 deletions(-)
qemu-nbd.c +77 -44
index 65dc30c..d5c32de 100644
@@ -30,7 +30,6 @@
 #include <stdarg.h>
 #include <stdio.h>
 #include <getopt.h>
-#include <err.h>
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <netinet/in.h>
@@ -158,7 +157,8 @@ static int find_partition(BlockBackend *blk, int partition,
 
     if ((ret = blk_read(blk, 0, data, 1)) < 0) {
         errno = -ret;
-        err(EXIT_FAILURE, "error while reading");
+        error_report("error while reading: %s", strerror(errno));
+        exit(EXIT_FAILURE);
     }
 
     if (data[510] != 0x55 || data[511] != 0xaa) {
@@ -179,7 +179,8 @@ static int find_partition(BlockBackend *blk, int partition,
 
             if ((ret = blk_read(blk, mbr[i].start_sector_abs, data1, 1)) < 0) {
                 errno = -ret;
-                err(EXIT_FAILURE, "error while reading");
+                error_report("error while reading: %s", strerror(errno));
+                exit(EXIT_FAILURE);
             }
 
             for (j = 0; j < 4; j++) {
@@ -454,16 +455,19 @@ int main(int argc, char **argv)
             /* fallthrough */
         case QEMU_NBD_OPT_CACHE:
             if (seen_cache) {
-                errx(EXIT_FAILURE, "-n and --cache can only be specified once");
+                error_report("-n and --cache can only be specified once");
+                exit(EXIT_FAILURE);
             }
             seen_cache = true;
             if (bdrv_parse_cache_flags(optarg, &flags) == -1) {
-                errx(EXIT_FAILURE, "Invalid cache mode `%s'", optarg);
+                error_report("Invalid cache mode `%s'", optarg);
+                exit(EXIT_FAILURE);
             }
             break;
         case QEMU_NBD_OPT_AIO:
             if (seen_aio) {
-                errx(EXIT_FAILURE, "--aio can only be specified once");
+                error_report("--aio can only be specified once");
+                exit(EXIT_FAILURE);
             }
             seen_aio = true;
             if (!strcmp(optarg, "native")) {
@@ -471,16 +475,19 @@ int main(int argc, char **argv)
             } else if (!strcmp(optarg, "threads")) {
                 /* this is the default */
             } else {
-               errx(EXIT_FAILURE, "invalid aio mode `%s'", optarg);
+               error_report("invalid aio mode `%s'", optarg);
+               exit(EXIT_FAILURE);
             }
             break;
         case QEMU_NBD_OPT_DISCARD:
             if (seen_discard) {
-                errx(EXIT_FAILURE, "--discard can only be specified once");
+                error_report("--discard can only be specified once");
+                exit(EXIT_FAILURE);
             }
             seen_discard = true;
             if (bdrv_parse_discard_flags(optarg, &flags) == -1) {
-                errx(EXIT_FAILURE, "Invalid discard mode `%s'", optarg);
+                error_report("Invalid discard mode `%s'", optarg);
+                exit(EXIT_FAILURE);
             }
             break;
         case QEMU_NBD_OPT_DETECT_ZEROES:
@@ -491,13 +498,15 @@ int main(int argc, char **argv)
                                 BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
                                 &local_err);
             if (local_err) {
-                errx(EXIT_FAILURE, "Failed to parse detect_zeroes mode: %s", 
-                     error_get_pretty(local_err));
+                error_report("Failed to parse detect_zeroes mode: %s",
+                             error_get_pretty(local_err));
+                exit(EXIT_FAILURE);
             }
             if (detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP &&
                 !(flags & BDRV_O_UNMAP)) {
-                errx(EXIT_FAILURE, "setting detect-zeroes to unmap is not allowed "
-                                   "without setting discard operation to unmap"); 
+                error_report("setting detect-zeroes to unmap is not allowed "
+                             "without setting discard operation to unmap");
+                exit(EXIT_FAILURE);
             }
             break;
         case 'b':
@@ -509,10 +518,12 @@ int main(int argc, char **argv)
         case 'o':
                 dev_offset = strtoll (optarg, &end, 0);
             if (*end) {
-                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
+                error_report("Invalid offset `%s'", optarg);
+                exit(EXIT_FAILURE);
             }
             if (dev_offset < 0) {
-                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
+                error_report("Offset must be positive `%s'", optarg);
+                exit(EXIT_FAILURE);
             }
             break;
         case 'l':
@@ -520,8 +531,9 @@ int main(int argc, char **argv)
                 sn_opts = qemu_opts_parse_noisily(&internal_snapshot_opts,
                                                   optarg, false);
                 if (!sn_opts) {
-                    errx(EXIT_FAILURE, "Failed in parsing snapshot param `%s'",
-                         optarg);
+                    error_report("Failed in parsing snapshot param `%s'",
+                                 optarg);
+                    exit(EXIT_FAILURE);
                 }
             } else {
                 sn_id_or_name = optarg;
@@ -534,16 +546,19 @@ int main(int argc, char **argv)
         case 'P':
             partition = strtol(optarg, &end, 0);
             if (*end) {
-                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
+                error_report("Invalid partition `%s'", optarg);
+                exit(EXIT_FAILURE);
             }
             if (partition < 1 || partition > 8) {
-                errx(EXIT_FAILURE, "Invalid partition %d", partition);
+                error_report("Invalid partition %d", partition);
+                exit(EXIT_FAILURE);
             }
             break;
         case 'k':
             sockpath = optarg;
             if (sockpath[0] != '/') {
-                errx(EXIT_FAILURE, "socket path must be absolute\n");
+                error_report("socket path must be absolute\n");
+                exit(EXIT_FAILURE);
             }
             break;
         case 'd':
@@ -555,10 +570,12 @@ int main(int argc, char **argv)
         case 'e':
             shared = strtol(optarg, &end, 0);
             if (*end) {
-                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
+                error_report("Invalid shared device number '%s'", optarg);
+                exit(EXIT_FAILURE);
             }
             if (shared < 1) {
-                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
+                error_report("Shared device number must be greater than 0\n");
+                exit(EXIT_FAILURE);
             }
             break;
         case 'f':
@@ -579,21 +596,24 @@ int main(int argc, char **argv)
             exit(0);
             break;
         case '?':
-            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
-                 argv[0]);
+            error_report("Try `%s --help' for more information.", argv[0]);
+            exit(EXIT_FAILURE);
         }
     }
 
     if ((argc - optind) != 1) {
-        errx(EXIT_FAILURE, "Invalid number of argument.\n"
-             "Try `%s --help' for more information.",
-             argv[0]);
+        error_report("Invalid number of argument.\n"
+                     "Try `%s --help' for more information.",
+                     argv[0]);
+        exit(EXIT_FAILURE);
     }
 
     if (disconnect) {
         fd = open(argv[optind], O_RDWR);
         if (fd < 0) {
-            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);
+            error_report("Cannot open %s: %s", argv[optind],
+                         strerror(errno));
+            exit(EXIT_FAILURE);
         }
         nbd_disconnect(fd);
 
@@ -610,7 +630,9 @@ int main(int argc, char **argv)
         int ret;
 
         if (qemu_pipe(stderr_fd) < 0) {
-            err(EXIT_FAILURE, "Error setting up communication pipe");
+            error_report("Error setting up communication pipe: %s",
+                         strerror(errno));
+            exit(EXIT_FAILURE);
         }
 
         /* Now daemonize, but keep a communication channel open to
@@ -618,7 +640,8 @@ int main(int argc, char **argv)
          */
         pid = fork();
         if (pid < 0) {
-            err(EXIT_FAILURE, "Failed to fork");
+            error_report("Failed to fork: %s", strerror(errno));
+            exit(EXIT_FAILURE);
         } else if (pid == 0) {
             close(stderr_fd[0]);
             ret = qemu_daemon(1, 0);
@@ -626,7 +649,8 @@ int main(int argc, char **argv)
             /* Temporarily redirect stderr to the parent's pipe...  */
             dup2(stderr_fd[1], STDERR_FILENO);
             if (ret < 0) {
-                err(EXIT_FAILURE, "Failed to daemonize");
+                error_report("Failed to daemonize: %s", strerror(errno));
+                exit(EXIT_FAILURE);
             }
 
             /* ... close the descriptor we inherited and go on.  */
@@ -648,7 +672,9 @@ int main(int argc, char **argv)
                 }
             }
             if (ret < 0) {
-                err(EXIT_FAILURE, "Cannot read from daemon");
+                error_report("Cannot read from daemon: %s",
+                             strerror(errno));
+                exit(EXIT_FAILURE);
             }
 
             /* Usually the daemon should not print any message.
@@ -680,8 +706,9 @@ int main(int argc, char **argv)
     srcpath = argv[optind];
     blk = blk_new_open("hda", srcpath, NULL, options, flags, &local_err);
     if (!blk) {
-        errx(EXIT_FAILURE, "Failed to blk_new_open '%s': %s", argv[optind],
-             error_get_pretty(local_err));
+        error_report("Failed to blk_new_open '%s': %s", argv[optind],
+                     error_get_pretty(local_err));
+        exit(EXIT_FAILURE);
     }
     bs = blk_bs(blk);
 
@@ -696,30 +723,34 @@ int main(int argc, char **argv)
     }
     if (ret < 0) {
         errno = -ret;
-        err(EXIT_FAILURE,
-            "Failed to load snapshot: %s",
-            error_get_pretty(local_err));
+        error_report("Failed to load snapshot: %s: %s",
+                     error_get_pretty(local_err), strerror(errno));
+        exit(EXIT_FAILURE);
     }
 
     bs->detect_zeroes = detect_zeroes;
     fd_size = blk_getlength(blk);
     if (fd_size < 0) {
-        errx(EXIT_FAILURE, "Failed to determine the image length: %s",
-             strerror(-fd_size));
+        error_report("Failed to determine the image length: %s",
+                     strerror(-fd_size));
+        exit(EXIT_FAILURE);
     }
 
     if (partition != -1) {
         ret = find_partition(blk, partition, &dev_offset, &fd_size);
         if (ret < 0) {
             errno = -ret;
-            err(EXIT_FAILURE, "Could not find partition %d", partition);
+            error_report("Could not find partition %d: %s", partition,
+                         strerror(errno));
+            exit(EXIT_FAILURE);
         }
     }
 
     exp = nbd_export_new(blk, dev_offset, fd_size, nbdflags, nbd_export_closed,
                          &local_err);
     if (!exp) {
-        errx(EXIT_FAILURE, "%s", error_get_pretty(local_err));
+        error_report("%s", error_get_pretty(local_err));
+        exit(EXIT_FAILURE);
     }
 
     fd = socket_listen(saddr, &local_err);
@@ -733,8 +764,8 @@ int main(int argc, char **argv)
 
         ret = pthread_create(&client_thread, NULL, nbd_client_thread, device);
         if (ret != 0) {
-            errx(EXIT_FAILURE, "Failed to create client thread: %s",
-                 strerror(ret));
+            error_report("Failed to create client thread: %s", strerror(ret));
+            exit(EXIT_FAILURE);
         }
     } else {
         /* Shut up GCC warnings.  */
@@ -747,7 +778,9 @@ int main(int argc, char **argv)
     /* now when the initialization is (almost) complete, chdir("/")
      * to free any busy filesystems */
     if (chdir("/") < 0) {
-        err(EXIT_FAILURE, "Could not chdir to root directory");
+        error_report("Could not chdir to root directory: %s",
+                     strerror(errno));
+        exit(EXIT_FAILURE);
     }
 
     state = RUNNING;
Signature · 1 line
2.4.3
#2 lore raw

PATCH v3 2/24 error: Use error_report_err() where appropriate (again)

In reply to Markus Armbruster

Same Coccinelle semantic patch as in commit 565f65d.

We now use the original error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I don't think the errors touched in this commit can come with hints.

---
 block/sheepdog.c    | 3 +--
 hw/arm/imx25_pdk.c  | 2 +-
 hw/arm/kzm.c        | 2 +-
 hw/arm/netduino2.c  | 2 +-
 hw/arm/xlnx-ep108.c | 2 +-
 hw/ppc/spapr_drc.c  | 6 ++----
 qemu-nbd.c          | 2 +-
 vl.c                | 2 +-
 8 files changed, 9 insertions(+), 12 deletions(-)
block/sheepdog.c +1 -2
index d80e4ed..dd8301b 100644
@@ -1861,8 +1861,7 @@ static int sd_create(const char *filename, QemuOpts *opts,
 
         fd = connect_to_sdog(s, &local_err);
         if (fd < 0) {
-            error_report("%s", error_get_pretty(local_err));
-            error_free(local_err);
+            error_report_err(local_err);
             ret = -EIO;
             goto out;
         }
hw/arm/imx25_pdk.c +1 -1
index 59a4c11..039f0eb 100644
@@ -75,7 +75,7 @@ static void imx25_pdk_init(MachineState *machine)
 
     object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
     if (err != NULL) {
-        error_report("%s", error_get_pretty(err));
+        error_report_err(err);
         exit(1);
     }
 
hw/arm/kzm.c +1 -1
index eff6f46..f4b463a 100644
@@ -74,7 +74,7 @@ static void kzm_init(MachineState *machine)
 
     object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
     if (err != NULL) {
-        error_report("%s", error_get_pretty(err));
+        error_report_err(err);
         exit(1);
     }
 
hw/arm/netduino2.c +1 -1
index a3b9e82..3ab83a1 100644
@@ -38,7 +38,7 @@ static void netduino2_init(MachineState *machine)
     qdev_prop_set_string(dev, "cpu-model", "cortex-m3");
     object_property_set_bool(OBJECT(dev), true, "realized", &err);
     if (err != NULL) {
-        error_report("%s", error_get_pretty(err));
+        error_report_err(err);
         exit(1);
     }
 }
hw/arm/xlnx-ep108.c +1 -1
index 85b978f..73e6087 100644
@@ -41,7 +41,7 @@ static void xlnx_ep108_init(MachineState *machine)
 
     object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
     if (err) {
-        error_report("%s", error_get_pretty(err));
+        error_report_err(err);
         exit(1);
     }
 
hw/ppc/spapr_drc.c +2 -4
index 8be62c3..4fb86a6 100644
@@ -465,8 +465,7 @@ static void realize(DeviceState *d, Error **errp)
     object_property_add_alias(root_container, link_name,
                               drc->owner, child_name, &err);
     if (err) {
-        error_report("%s", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
         object_unref(OBJECT(drc));
     }
     g_free(child_name);
@@ -486,8 +485,7 @@ static void unrealize(DeviceState *d, Error **errp)
     snprintf(name, sizeof(name), "%x", drck->get_index(drc));
     object_property_del(root_container, name, &err);
     if (err) {
-        error_report("%s", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
         object_unref(OBJECT(drc));
     }
 }
qemu-nbd.c +1 -1
index d5c32de..65c0ebd 100644
@@ -749,7 +749,7 @@ int main(int argc, char **argv)
     exp = nbd_export_new(blk, dev_offset, fd_size, nbdflags, nbd_export_closed,
                          &local_err);
     if (!exp) {
-        error_report("%s", error_get_pretty(local_err));
+        error_report_err(local_err);
         exit(EXIT_FAILURE);
     }
 
vl.c +1 -1
index 6c2add9..7548fa2 100644
@@ -4553,7 +4553,7 @@ int main(int argc, char **argv, char **envp)
         Error *local_err = NULL;
         qemu_boot_set(boot_once, &local_err);
         if (local_err) {
-            error_report("%s", error_get_pretty(local_err));
+            error_report_err(local_err);
             exit(1);
         }
         qemu_register_reset(restore_boot_order, g_strdup(boot_order));
Signature · 1 line
2.4.3
#3 lore raw

PATCH v3 3/24 error: Use error_report_err() instead of monitor_printf()

In reply to Markus Armbruster

Both error_report_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_report_err() reports to stderr.

Most changed functions are HMP command handlers. These should only run within an HMP monitor. The one exception is bdrv_password_cb(), which should also only run within an HMP monitor.

Four command handlers prefix the error message with the command name:
balloon, migrate_set_capability, migrate_set_parameter, migrate. Pointless, drop.

Unlike monitor_printf(), error_report_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00). Example:

(qemu) device_add ivshmem,id=666
Parameter 'id' expects an identifier
Identifiers consist of letters, digits, '-', '.', '_', starting with a letter. Try "help device_add" for more information

The "Identifiers consist of..." line is new with this patch.

Coccinelle semantic patch:

    @@
    expression M, E;
    @@
    -    monitor_printf(M, "%s\n", error_get_pretty(E));
    -    error_free(E);
    +    error_report_err(E);
    @r1@
    expression M, E;
    format F;
    position p;
    @@
    -    monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p
    -    error_free(E);
    +    error_report_err(E);
    @script:python@
	p << r1.p;
    @@
    print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column)
---
 hmp.c                 | 29 +++++++++--------------------
 hw/s390x/s390-skeys.c |  3 +--
 migration/savevm.c    |  3 +--
 monitor.c             |  6 ++----
 4 files changed, 13 insertions(+), 28 deletions(-)
hmp.c +9 -20
index c2b2c16..9723397 100644
@@ -41,8 +41,7 @@ static void hmp_handle_error(Monitor *mon, Error **errp)
 {
     assert(errp);
     if (*errp) {
-        monitor_printf(mon, "%s\n", error_get_pretty(*errp));
-        error_free(*errp);
+        error_report_err(*errp);
     }
 }
 
@@ -556,8 +555,7 @@ void hmp_info_vnc(Monitor *mon, const QDict *qdict)
 
     info = qmp_query_vnc(&err);
     if (err) {
-        monitor_printf(mon, "%s\n", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
         return;
     }
 
@@ -679,8 +677,7 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
 
     info = qmp_query_balloon(&err);
     if (err) {
-        monitor_printf(mon, "%s\n", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
         return;
     }
 
@@ -948,8 +945,7 @@ void hmp_ringbuf_read(Monitor *mon, const QDict *qdict)
 
     data = qmp_ringbuf_read(chardev, size, false, 0, &err);
     if (err) {
-        monitor_printf(mon, "%s\n", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
         return;
     }
 
@@ -1042,8 +1038,7 @@ void hmp_balloon(Monitor *mon, const QDict *qdict)
 
     qmp_balloon(value, &err);
     if (err) {
-        monitor_printf(mon, "balloon: %s\n", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
     }
 }
 
@@ -1191,8 +1186,7 @@ void hmp_migrate_set_cache_size(Monitor *mon, const QDict *qdict)
 
     qmp_migrate_set_cache_size(value, &err);
     if (err) {
-        monitor_printf(mon, "%s\n", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
         return;
     }
 }
@@ -1229,9 +1223,7 @@ void hmp_migrate_set_capability(Monitor *mon, const QDict *qdict)
     qapi_free_MigrationCapabilityStatusList(caps);
 
     if (err) {
-        monitor_printf(mon, "migrate_set_capability: %s\n",
-                       error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
     }
 }
 
@@ -1281,9 +1273,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
     }
 
     if (err) {
-        monitor_printf(mon, "migrate_set_parameter: %s\n",
-                       error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
     }
 }
 
@@ -1544,8 +1534,7 @@ void hmp_migrate(Monitor *mon, const QDict *qdict)
 
     qmp_migrate(uri, !!blk, blk, !!inc, inc, false, false, &err);
     if (err) {
-        monitor_printf(mon, "migrate: %s\n", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
         return;
     }
 
hw/s390x/s390-skeys.c +1 -2
index 539ef6d..4af1558 100644
@@ -100,8 +100,7 @@ void hmp_dump_skeys(Monitor *mon, const QDict *qdict)
 
     qmp_dump_skeys(filename, &err);
     if (err) {
-        monitor_printf(mon, "%s\n", error_get_pretty(err));
-        error_free(err);
+        error_report_err(err);
     }
 }
 
migration/savevm.c +1 -2
index 0ad1b93..e277b72 100644
@@ -1984,8 +1984,7 @@ void hmp_savevm(Monitor *mon, const QDict *qdict)
     vm_state_size = qemu_ftell(f);
     qemu_fclose(f);
     if (ret < 0) {
-        monitor_printf(mon, "%s\n", error_get_pretty(local_err));
-        error_free(local_err);
+        error_report_err(local_err);
         goto the_end;
     }
 
monitor.c +2 -4
index e7e7ae2..c53a453 100644
@@ -1464,8 +1464,7 @@ static void hmp_boot_set(Monitor *mon, const QDict *qdict)
 
     qemu_boot_set(bootdevice, &local_err);
     if (local_err) {
-        monitor_printf(mon, "%s\n", error_get_pretty(local_err));
-        error_free(local_err);
+        error_report_err(local_err);
     } else {
         monitor_printf(mon, "boot device list now set to %s\n", bootdevice);
     }
@@ -4149,8 +4148,7 @@ static void bdrv_password_cb(void *opaque, const char *password,
 
     bdrv_add_key(bs, password, &local_err);
     if (local_err) {
-        monitor_printf(mon, "%s\n", error_get_pretty(local_err));
-        error_free(local_err);
+        error_report_err(local_err);
         ret = -EPERM;
     }
     if (mon->password_completion_cb)
Signature · 1 line
2.4.3
#4 lore raw

PATCH v3 4/24 error: Use error_report_err() instead of ad hoc prints

In reply to Markus Armbruster

Unlike ad hoc prints, error_report_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00). Example:

    $ bld/ivshmem-server -l 42@
    Parameter 'shm_size' expects a size
    You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.

The last line is new with this patch.

While there, drop a "cannot parse shm size: " message prefix; it's redundant, because the error message proper is always of the form "Parameter 'shm_size' expects ...".

---
 contrib/ivshmem-server/main.c | 4 +---
 qdev-monitor.c                | 3 +--
 qemu-nbd.c                    | 3 +--
 3 files changed, 3 insertions(+), 7 deletions(-)
contrib/ivshmem-server/main.c +1 -3
index 54ff001..00508b5 100644
@@ -106,9 +106,7 @@ ivshmem_server_parse_args(IvshmemServerArgs *args, int argc, char *argv[])
         case 'l': /* shm_size */
             parse_option_size("shm_size", optarg, &args->shm_size, &errp);
             if (errp) {
-                fprintf(stderr, "cannot parse shm size: %s\n",
-                        error_get_pretty(errp));
-                error_free(errp);
+                error_report_err(errp);
                 ivshmem_server_usage(argv[0], 1);
             }
             break;
qdev-monitor.c +1 -2
index 30936df..3ce4710 100644
@@ -266,8 +266,7 @@ int qdev_device_help(QemuOpts *opts)
     return 1;
 
 error:
-    error_printf("%s\n", error_get_pretty(local_err));
-    error_free(local_err);
+    error_report_err(local_err);
     return 1;
 }
 
qemu-nbd.c +1 -2
index 65c0ebd..706552e 100644
@@ -251,8 +251,7 @@ static void *nbd_client_thread(void *arg)
                                 &size, &local_error);
     if (ret < 0) {
         if (local_error) {
-            fprintf(stderr, "%s\n", error_get_pretty(local_error));
-            error_free(local_error);
+            error_report_err(local_error);
         }
         goto out_socket;
     }
Signature · 1 line
2.4.3
#5 lore raw

PATCH v3 5/24 error: Improve documentation

In reply to Markus Armbruster

While there, tighten error_append_hint()'s assertion.

---
 include/qapi/error.h | 20 ++++++++++++++++++--
 util/error.c         |  2 +-
 util/qemu-error.c    |  8 ++++----
 3 files changed, 23 insertions(+), 7 deletions(-)
include/qapi/error.h +18 -2
index 1480f59..b18a608 100644
@@ -18,6 +18,15 @@
  * Create an error:
  *     error_setg(&err, "situation normal, all fouled up");
  *
+ * Create an error and add additional explanation:
+ *     error_setg(&err, "invalid quark");
+ *     error_append_hint(&err, "Valid quarks are up, down, strange, "
+ *                       "charm, top, bottom.\n");
+ *
+ * Do *not* contract this to
+ *     error_setg(&err, "invalid quark\n"
+ *                "Valid quarks are up, down, strange, charm, top, bottom.");
+ *
  * Report an error to stderr:
  *     error_report_err(err);
  * This frees the error object.
@@ -26,6 +35,7 @@
  *     const char *msg = error_get_pretty(err);
  *     do with msg what needs to be done...
  *     error_free(err);
+ * Note that this loses hints added with error_append_hint().
  *
  * Handle an error without reporting it (just for completeness):
  *     error_free(err);
@@ -142,6 +152,8 @@ ErrorClass error_get_class(const Error *err);
  * If @errp is anything else, *@errp must be NULL.
  * The new error's class is ERROR_CLASS_GENERIC_ERROR, and its
  * human-readable error message is made from printf-style @fmt, ...
+ * The resulting message should be a single phrase, with no newline or
+ * trailing punctuation.
  */
 #define error_setg(errp, fmt, ...)                              \
     error_setg_internal((errp), __FILE__, __LINE__, __func__,   \
@@ -198,7 +210,11 @@ void error_propagate(Error **dst_errp, Error *local_err);
 
 /**
  * Append a printf-style human-readable explanation to an existing error.
- * May be called multiple times, and safe if @errp is NULL.
+ * @errp may be NULL, but not &error_fatal or &error_abort.
+ * Trivially the case if you call it only after error_setg() or
+ * error_propagate().
+ * May be called multiple times.  The resulting hint should end with a
+ * newline.
  */
 void error_append_hint(Error **errp, const char *fmt, ...)
     GCC_FMT_ATTR(2, 3);
@@ -232,7 +248,7 @@ void error_free_or_abort(Error **errp);
 /*
  * Convenience function to error_report() and free @err.
  */
-void error_report_err(Error *);
+void error_report_err(Error *err);
 
 /*
  * Just like error_setg(), except you get to specify the error class.
util/error.c +1 -1
index 9b27c45..ebfb74b 100644
@@ -132,7 +132,7 @@ void error_append_hint(Error **errp, const char *fmt, ...)
         return;
     }
     err = *errp;
-    assert(err && errp != &error_abort);
+    assert(err && errp != &error_abort && errp != &error_fatal);
 
     if (!err->hint) {
         err->hint = g_string_new(NULL);
util/qemu-error.c +4 -4
index c1574bb..ecf5708 100644
@@ -200,8 +200,8 @@ static void error_print_loc(void)
 bool enable_timestamp_msg;
 /*
  * Print an error message to current monitor if we have one, else to stderr.
- * Format arguments like vsprintf().  The result should not contain
- * newlines.
+ * Format arguments like vsprintf().  The resulting message should be
+ * a single phrase, with no newline or trailing punctuation.
  * Prepend the current location and append a newline.
  * It's wrong to call this in a QMP monitor.  Use error_setg() there.
  */
@@ -224,8 +224,8 @@ void error_vreport(const char *fmt, va_list ap)
 
 /*
  * Print an error message to current monitor if we have one, else to stderr.
- * Format arguments like sprintf().  The result should not contain
- * newlines.
+ * Format arguments like sprintf().  The resulting message should be a
+ * single phrase, with no newline or trailing punctuation.
  * Prepend the current location and append a newline.
  * It's wrong to call this in a QMP monitor.  Use error_setg() there.
  */
Signature · 1 line
2.4.3
Reviewed-by on v3 5/24
#6 lore raw

Re: [Qemu-devel] [PATCH v3 05/24] error: Improve documentation

Quoted 9 lines · Markus Armbruster

While there, tighten error_append_hint()'s assertion.

---
 include/qapi/error.h | 20 ++++++++++++++++++--
 util/error.c         |  2 +-
 util/qemu-error.c    |  8 ++++----
 3 files changed, 23 insertions(+), 7 deletions(-)
Signature · 2 lines
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org
#7 lore raw

PATCH v3 6/24 block: Clean up "Could not create temporary overlay" error message

In reply to Markus Armbruster

bdrv_create() sets an error and returns -errno on failure. When the latter is interesting, the error is created with error_setg_errno().

bdrv_append_temp_snapshot() uses the error's message to create a new one with error_setg_errno(). This adds a strerror() that is either uninteresting or duplicate. Use error_setg() instead.

---
 block.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
block.c +2 -3
index 9971976..4b40cb2 100644
@@ -1336,9 +1336,8 @@ int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
     ret = bdrv_create(&bdrv_qcow2, tmp_filename, opts, &local_err);
     qemu_opts_del(opts);
     if (ret < 0) {
-        error_setg_errno(errp, -ret, "Could not create temporary overlay "
-                         "'%s': %s", tmp_filename,
-                         error_get_pretty(local_err));
+        error_setg(errp, "Could not create temporary overlay '%s': %s",
+                   tmp_filename, error_get_pretty(local_err));
         error_free(local_err);
         goto out;
     }
Signature · 1 line
2.4.3
#8 lore raw

PATCH v3 7/24 qemu-nbd: Clean up "Failed to load snapshot" error message

In reply to Markus Armbruster

bdrv_snapshot_load_tmp() sets an error and returns -errno on failure. We report both even though the error message is self-contained. Drop the redundant strerror().

While there: setting errno right before exit() is pointless, so drop that, too.

---
 qemu-nbd.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
qemu-nbd.c +5 -9
index 706552e..b8be3bc 100644
@@ -156,8 +156,7 @@ static int find_partition(BlockBackend *blk, int partition,
     int ret;
 
     if ((ret = blk_read(blk, 0, data, 1)) < 0) {
-        errno = -ret;
-        error_report("error while reading: %s", strerror(errno));
+        error_report("error while reading: %s", strerror(-ret));
         exit(EXIT_FAILURE);
     }
 
@@ -178,8 +177,7 @@ static int find_partition(BlockBackend *blk, int partition,
             int j;
 
             if ((ret = blk_read(blk, mbr[i].start_sector_abs, data1, 1)) < 0) {
-                errno = -ret;
-                error_report("error while reading: %s", strerror(errno));
+                error_report("error while reading: %s", strerror(-ret));
                 exit(EXIT_FAILURE);
             }
 
@@ -721,9 +719,8 @@ int main(int argc, char **argv)
                                                    &local_err);
     }
     if (ret < 0) {
-        errno = -ret;
-        error_report("Failed to load snapshot: %s: %s",
-                     error_get_pretty(local_err), strerror(errno));
+        error_report("Failed to load snapshot: %s",
+                     error_get_pretty(local_err));
         exit(EXIT_FAILURE);
     }
 
@@ -738,9 +735,8 @@ int main(int argc, char **argv)
     if (partition != -1) {
         ret = find_partition(blk, partition, &dev_offset, &fd_size);
         if (ret < 0) {
-            errno = -ret;
             error_report("Could not find partition %d: %s", partition,
-                         strerror(errno));
+                         strerror(-ret));
             exit(EXIT_FAILURE);
         }
     }
Signature · 1 line
2.4.3
#9 lore raw

PATCH v3 8/24 test-throttle: Simplify qemu_init_main_loop() error handling

In reply to Markus Armbruster

The code looks like it tries to check for both qemu_init_main_loop() and qemu_get_aio_context() failure in one conditional. In fact, qemu_get_aio_context() can fail only after qemu_init_main_loop() failed.

Simplify accordingly: check for qemu_init_main_loop() error directly, without bothering to improve its error message. Call qemu_get_aio_context() only when qemu_get_aio_context() succeeded. It can't fail then, so no need to check.

---
 tests/test-throttle.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)
tests/test-throttle.c +1 -14
index 85c9b6c..a95039f 100644
@@ -581,21 +581,8 @@ static void test_groups(void)
 
 int main(int argc, char **argv)
 {
-    Error *local_error = NULL;
-
-    qemu_init_main_loop(&local_error);
+    qemu_init_main_loop(&error_fatal);
     ctx = qemu_get_aio_context();
-
-    if (!ctx) {
-        error_report("Failed to create AIO Context: '%s'",
-                     local_error ? error_get_pretty(local_error) :
-                     "Failed to initialize the QEMU main loop");
-        if (local_error) {
-            error_free(local_error);
-        }
-        exit(1);
-    }
-
     bdrv_init();
 
     do {} while (g_main_context_iteration(NULL, false));
Signature · 1 line
2.4.3
#10 lore raw

PATCH v3 9/24 error: New error_prepend(), error_reportf_err()

In reply to Markus Armbruster

Instead of simply propagating an error verbatim, we sometimes want to add to its message, like this:

    frobnicate(arg, &err);
    error_setg(errp, "Can't frobnicate %s: %s",
                     arg, error_get_pretty(err));
    error_free(err);

This is suboptimal, because it loses err's hint (if any). Moreover, when errp is &error_abort or is subsequently propagated to &error_abort, the abort message points to the place where we last added to the error, not to the place where it originated.

To avoid these issues, provide means to add to an error's message in place:

    frobnicate(arg, errp);
    error_prepend(errp, "Can't frobnicate %s: ", arg);

Likewise, reporting an error like

    frobnicate(arg, &err);
    error_report("Can't frobnicate %s: %s", arg, error_get_pretty(err));

can lose err's hint. To avoid:

    error_reportf_err(err, "Can't frobnicate %s: ", arg);

The next commits will put these functions to use.

---
 include/qapi/error.h | 31 +++++++++++++++++++++++++++++--
 util/error.c         | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+), 2 deletions(-)
include/qapi/error.h +29 -2
index b18a608..45d6c72 100644
@@ -31,6 +31,9 @@
  *     error_report_err(err);
  * This frees the error object.
  *
+ * Report an error to stderr with additional text prepended:
+ *     error_reportf_err(err, "Could not frobnicate '%s': ", name);
+ *
  * Report an error somewhere else:
  *     const char *msg = error_get_pretty(err);
  *     do with msg what needs to be done...
@@ -48,6 +51,10 @@
  *     error_propagate(errp, err);
  * where Error **errp is a parameter, by convention the last one.
  *
+ * Pass an existing error to the caller with the message modified:
+ *     error_propagate(errp, err);
+ *     error_prepend(errp, "Could not frobnicate '%s': ", name);
+ *
  * Create a new error and pass it to the caller:
  *     error_setg(errp, "situation normal, all fouled up");
  *
@@ -108,9 +115,10 @@
 #ifndef ERROR_H
 #define ERROR_H
 
+#include <stdarg.h>
+#include <stdbool.h>
 #include "qemu/compiler.h"
 #include "qapi-types.h"
-#include <stdbool.h>
 
 /*
  * Opaque error object.
@@ -208,7 +216,20 @@ void error_setg_win32_internal(Error **errp,
  */
 void error_propagate(Error **dst_errp, Error *local_err);
 
-/**
+/*
+ * Prepend some text to @errp's human-readable error message.
+ * The text is made by formatting @fmt, @ap like vprintf().
+ */
+void error_vprepend(Error **errp, const char *fmt, va_list ap);
+
+/*
+ * Prepend some text to @errp's human-readable error message.
+ * The text is made by formatting @fmt, ... like printf().
+ */
+void error_prepend(Error **errp, const char *fmt, ...)
+    GCC_FMT_ATTR(2, 3);
+
+/*
  * Append a printf-style human-readable explanation to an existing error.
  * @errp may be NULL, but not &error_fatal or &error_abort.
  * Trivially the case if you call it only after error_setg() or
@@ -251,6 +272,12 @@ void error_free_or_abort(Error **errp);
 void error_report_err(Error *err);
 
 /*
+ * Convenience function to error_prepend(), error_report() and free @err.
+ */
+void error_reportf_err(Error *err, const char *fmt, ...)
+    GCC_FMT_ATTR(2, 3);
+
+/*
  * Just like error_setg(), except you get to specify the error class.
  * Note: use of error classes other than ERROR_CLASS_GENERIC_ERROR is
  * strongly discouraged.
util/error.c +33 -0
index ebfb74b..57303fd 100644
@@ -122,6 +122,29 @@ void error_setg_file_open_internal(Error **errp,
                               "Could not open '%s'", filename);
 }
 
+void error_vprepend(Error **errp, const char *fmt, va_list ap)
+{
+    GString *newmsg;
+
+    if (!errp) {
+        return;
+    }
+
+    newmsg = g_string_new(NULL);
+    g_string_vprintf(newmsg, fmt, ap);
+    g_string_append(newmsg, (*errp)->msg);
+    (*errp)->msg = g_string_free(newmsg, 0);
+}
+
+void error_prepend(Error **errp, const char *fmt, ...)
+{
+    va_list ap;
+
+    va_start(ap, fmt);
+    error_vprepend(errp, fmt, ap);
+    va_end(ap);
+}
+
 void error_append_hint(Error **errp, const char *fmt, ...)
 {
     va_list ap;
@@ -209,6 +232,16 @@ void error_report_err(Error *err)
     error_free(err);
 }
 
+void error_reportf_err(Error *err, const char *fmt, ...)
+{
+    va_list ap;
+
+    va_start(ap, fmt);
+    error_vprepend(&err, fmt, ap);
+    va_end(ap);
+    error_report_err(err);
+}
+
 void error_free(Error *err)
 {
     if (err) {
Signature · 1 line
2.4.3
#11 lore raw

PATCH v3 10/24 error: Don't decorate original error message when adding to it

In reply to Markus Armbruster

Prepend the additional information, colon, space to the original message without enclosing it in parenthesis or quotes, like we do elsewhere.

---
 hw/core/qdev-properties.c | 2 +-
 qemu-img.c                | 2 +-
 tests/test-aio.c          | 2 +-
 tests/test-thread-pool.c  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
hw/core/qdev-properties.c +1 -1
index 33e245e..fffb58e 100644
@@ -1063,7 +1063,7 @@ static void qdev_prop_set_globals_for_type(DeviceState *dev,
         object_property_parse(OBJECT(dev), prop->value, prop->property, &err);
         if (err != NULL) {
             assert(prop->user_provided);
-            error_report("Warning: global %s.%s=%s ignored (%s)",
+            error_report("Warning: global %s.%s=%s ignored: %s",
                          prop->driver, prop->property, prop->value,
                          error_get_pretty(err));
             error_free(err);
qemu-img.c +1 -1
index 033011c..ea8c84d 100644
@@ -2436,7 +2436,7 @@ static int img_snapshot(int argc, char **argv)
     case SNAPSHOT_DELETE:
         bdrv_snapshot_delete_by_id_or_name(bs, snapshot_name, &err);
         if (err) {
-            error_report("Could not delete snapshot '%s': (%s)",
+            error_report("Could not delete snapshot '%s': %s",
                          snapshot_name, error_get_pretty(err));
             error_free(err);
             ret = 1;
tests/test-aio.c +1 -1
index e188d8c..f0b447e 100644
@@ -832,7 +832,7 @@ int main(int argc, char **argv)
 
     ctx = aio_context_new(&local_error);
     if (!ctx) {
-        error_report("Failed to create AIO Context: '%s'",
+        error_report("Failed to create AIO Context: %s",
                      error_get_pretty(local_error));
         error_free(local_error);
         exit(1);
tests/test-thread-pool.c +1 -1
index 6a0b981..153b8f5 100644
@@ -229,7 +229,7 @@ int main(int argc, char **argv)
 
     ctx = aio_context_new(&local_error);
     if (!ctx) {
-        error_report("Failed to create AIO Context: '%s'",
+        error_report("Failed to create AIO Context: %s",
                      error_get_pretty(local_error));
         error_free(local_error);
         exit(1);
Signature · 1 line
2.4.3
#12 lore raw

PATCH v3 11/24 error: Use error_reportf_err() where it makes obvious sense

In reply to Markus Armbruster

Done with this Coccinelle semantic patch

    @@
    expression FMT, E, S;
    expression list ARGS;
    @@
    -    error_report(FMT, ARGS, error_get_pretty(E));
    +    error_reportf_err(E, FMT/*@@@*/, ARGS);
    (
    -    error_free(E);
    |
	 exit(S);
    |
	 abort();
    )

followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings.

We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints.

---
 arch_init.c               |  4 +---
 block/sheepdog.c          |  5 ++---
 blockdev.c                | 12 +++++-------
 hw/arm/cubieboard.c       |  9 ++++-----
 hw/arm/digic_boards.c     |  3 +--
 hw/core/qdev-properties.c |  6 ++----
 hw/core/qdev.c            |  5 ++---
 hw/i386/pc.c              |  5 ++---
 hw/ppc/e500.c             |  4 ++--
 hw/usb/bus.c              |  5 ++---
 qemu-img.c                | 33 +++++++++++++--------------------
 qemu-nbd.c                | 11 +++++------
 replay/replay.c           |  3 +--
 tests/test-aio.c          |  4 +---
 tests/test-thread-pool.c  |  4 +---
 ui/vnc.c                  |  4 +---
 vl.c                      |  6 ++----
 17 files changed, 47 insertions(+), 76 deletions(-)
arch_init.c +1 -3
index 38f5fb9..d1383b3 100644
@@ -258,9 +258,7 @@ void do_acpitable_option(const QemuOpts *opts)
 
     acpi_table_add(opts, &err);
     if (err) {
-        error_report("Wrong acpi table provided: %s",
-                     error_get_pretty(err));
-        error_free(err);
+        error_reportf_err(err, "Wrong acpi table provided: ");
         exit(1);
     }
 #endif
block/sheepdog.c +2 -3
index dd8301b..6986be8 100644
@@ -2405,9 +2405,8 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
 
     ret = do_sd_create(s, &new_vid, 1, &local_err);
     if (ret < 0) {
-        error_report("failed to create inode for snapshot: %s",
-                     error_get_pretty(local_err));
-        error_free(local_err);
+        error_reportf_err(local_err,
+                          "failed to create inode for snapshot: ");
         goto cleanup;
     }
 
blockdev.c +5 -7
index 13eaa77..f93a6ee 100644
@@ -1583,13 +1583,11 @@ static void internal_snapshot_abort(BlkActionState *common)
     }
 
     if (bdrv_snapshot_delete(bs, sn->id_str, sn->name, &local_error) < 0) {
-        error_report("Failed to delete snapshot with id '%s' and name '%s' on "
-                     "device '%s' in abort: %s",
-                     sn->id_str,
-                     sn->name,
-                     bdrv_get_device_name(bs),
-                     error_get_pretty(local_error));
-        error_free(local_error);
+        error_reportf_err(local_error,
+                          "Failed to delete snapshot with id '%s' and "
+                          "name '%s' on device '%s' in abort: ",
+                          sn->id_str, sn->name,
+                          bdrv_get_device_name(bs));
     }
 }
 
hw/arm/cubieboard.c +4 -5
index bf068cd..a71e43c 100644
@@ -39,27 +39,26 @@ static void cubieboard_init(MachineState *machine)
 
     object_property_set_int(OBJECT(&s->a10->emac), 1, "phy-addr", &err);
     if (err != NULL) {
-        error_report("Couldn't set phy address: %s", error_get_pretty(err));
+        error_reportf_err(err, "Couldn't set phy address: ");
         exit(1);
     }
 
     object_property_set_int(OBJECT(&s->a10->timer), 32768, "clk0-freq", &err);
     if (err != NULL) {
-        error_report("Couldn't set clk0 frequency: %s", error_get_pretty(err));
+        error_reportf_err(err, "Couldn't set clk0 frequency: ");
         exit(1);
     }
 
     object_property_set_int(OBJECT(&s->a10->timer), 24000000, "clk1-freq",
                             &err);
     if (err != NULL) {
-        error_report("Couldn't set clk1 frequency: %s", error_get_pretty(err));
+        error_reportf_err(err, "Couldn't set clk1 frequency: ");
         exit(1);
     }
 
     object_property_set_bool(OBJECT(s->a10), true, "realized", &err);
     if (err != NULL) {
-        error_report("Couldn't realize Allwinner A10: %s",
-                     error_get_pretty(err));
+        error_reportf_err(err, "Couldn't realize Allwinner A10: ");
         exit(1);
     }
 
hw/arm/digic_boards.c +1 -2
index 710045a..dfaed25 100644
@@ -64,8 +64,7 @@ static void digic4_board_init(DigicBoard *board)
     s->digic = DIGIC(object_new(TYPE_DIGIC));
     object_property_set_bool(OBJECT(s->digic), true, "realized", &err);
     if (err != NULL) {
-        error_report("Couldn't realize DIGIC SoC: %s",
-                     error_get_pretty(err));
+        error_reportf_err(err, "Couldn't realize DIGIC SoC: ");
         exit(1);
     }
 
hw/core/qdev-properties.c +2 -4
index fffb58e..3572810 100644
@@ -1063,10 +1063,8 @@ static void qdev_prop_set_globals_for_type(DeviceState *dev,
         object_property_parse(OBJECT(dev), prop->value, prop->property, &err);
         if (err != NULL) {
             assert(prop->user_provided);
-            error_report("Warning: global %s.%s=%s ignored: %s",
-                         prop->driver, prop->property, prop->value,
-                         error_get_pretty(err));
-            error_free(err);
+            error_reportf_err(err, "Warning: global %s.%s=%s ignored: ",
+                              prop->driver, prop->property, prop->value);
             return;
         }
     }
hw/core/qdev.c +2 -3
index b3ad467..2a44ec5 100644
@@ -370,9 +370,8 @@ void qdev_init_nofail(DeviceState *dev)
 
     object_property_set_bool(OBJECT(dev), true, "realized", &err);
     if (err) {
-        error_report("Initialization of device %s failed: %s",
-                     object_get_typename(OBJECT(dev)),
-                     error_get_pretty(err));
+        error_reportf_err(err, "Initialization of device %s failed: ",
+                          object_get_typename(OBJECT(dev)));
         exit(1);
     }
 }
hw/i386/pc.c +2 -3
index 8a8e756..ba7b414 100644
@@ -1253,9 +1253,8 @@ void pc_acpi_init(const char *default_dsdt)
 
         acpi_table_add_builtin(opts, &err);
         if (err) {
-            error_report("WARNING: failed to load %s: %s", filename,
-                         error_get_pretty(err));
-            error_free(err);
+            error_reportf_err(err, "WARNING: failed to load %s: ",
+                              filename);
         }
         g_free(filename);
     }
hw/ppc/e500.c +2 -2
index b3418db..bd7da47 100644
@@ -751,8 +751,8 @@ static qemu_irq *ppce500_init_mpic(MachineState *machine, PPCE500Params *params,
             dev = ppce500_init_mpic_kvm(params, irqs, &err);
         }
         if (machine_kernel_irqchip_required(machine) && !dev) {
-            error_report("kernel_irqchip requested but unavailable: %s",
-                         error_get_pretty(err));
+            error_reportf_err(err,
+                              "kernel_irqchip requested but unavailable: ");
             exit(1);
         }
     }
hw/usb/bus.c +2 -3
index ee6b43a..26ab67f 100644
@@ -725,9 +725,8 @@ USBDevice *usbdevice_create(const char *cmdline)
     }
     object_property_set_bool(OBJECT(dev), true, "realized", &err);
     if (err) {
-        error_report("Failed to initialize USB device '%s': %s",
-                     f->name, error_get_pretty(err));
-        error_free(err);
+        error_reportf_err(err, "Failed to initialize USB device '%s': ",
+                          f->name);
         object_unparent(OBJECT(dev));
         return NULL;
     }
qemu-img.c +13 -20
index ea8c84d..a4251cc 100644
@@ -213,9 +213,7 @@ static BlockBackend *img_open(const char *id, const char *filename,
 
     blk = blk_new_open(id, filename, NULL, options, flags, &local_err);
     if (!blk) {
-        error_report("Could not open '%s': %s", filename,
-                     error_get_pretty(local_err));
-        error_free(local_err);
+        error_reportf_err(local_err, "Could not open '%s': ", filename);
         goto fail;
     }
 
@@ -360,8 +358,7 @@ static int img_create(int argc, char **argv)
     bdrv_img_create(filename, fmt, base_filename, base_fmt,
                     options, img_size, BDRV_O_FLAGS, &local_err, quiet);
     if (local_err) {
-        error_report("%s: %s", filename, error_get_pretty(local_err));
-        error_free(local_err);
+        error_reportf_err(local_err, "%s: ", filename);
         goto fail;
     }
 
@@ -1711,9 +1708,7 @@ static int img_convert(int argc, char **argv)
         bdrv_snapshot_load_tmp_by_id_or_name(bs[0], snapshot_name, &local_err);
     }
     if (local_err) {
-        error_report("Failed to load snapshot: %s",
-                     error_get_pretty(local_err));
-        error_free(local_err);
+        error_reportf_err(local_err, "Failed to load snapshot: ");
         ret = -1;
         goto out;
     }
@@ -1809,9 +1804,8 @@ static int img_convert(int argc, char **argv)
         /* Create the new image */
         ret = bdrv_create(drv, out_filename, opts, &local_err);
         if (ret < 0) {
-            error_report("%s: error while converting %s: %s",
-                         out_filename, out_fmt, error_get_pretty(local_err));
-            error_free(local_err);
+            error_reportf_err(local_err, "%s: error while converting %s: ",
+                              out_filename, out_fmt);
             goto out;
         }
     }
@@ -2436,9 +2430,8 @@ static int img_snapshot(int argc, char **argv)
     case SNAPSHOT_DELETE:
         bdrv_snapshot_delete_by_id_or_name(bs, snapshot_name, &err);
         if (err) {
-            error_report("Could not delete snapshot '%s': %s",
-                         snapshot_name, error_get_pretty(err));
-            error_free(err);
+            error_reportf_err(err, "Could not delete snapshot '%s': ",
+                              snapshot_name);
             ret = 1;
         }
         break;
@@ -2571,9 +2564,9 @@ static int img_rebase(int argc, char **argv)
         blk_old_backing = blk_new_open("old_backing", backing_name, NULL,
                                        options, src_flags, &local_err);
         if (!blk_old_backing) {
-            error_report("Could not open old backing file '%s': %s",
-                         backing_name, error_get_pretty(local_err));
-            error_free(local_err);
+            error_reportf_err(local_err,
+                              "Could not open old backing file '%s': ",
+                              backing_name);
             goto out;
         }
 
@@ -2588,9 +2581,9 @@ static int img_rebase(int argc, char **argv)
             blk_new_backing = blk_new_open("new_backing", out_baseimg, NULL,
                                            options, src_flags, &local_err);
             if (!blk_new_backing) {
-                error_report("Could not open new backing file '%s': %s",
-                             out_baseimg, error_get_pretty(local_err));
-                error_free(local_err);
+                error_reportf_err(local_err,
+                                  "Could not open new backing file '%s': ",
+                                  out_baseimg);
                 goto out;
             }
         }
qemu-nbd.c +5 -6
index b8be3bc..f9fce4a 100644
@@ -495,8 +495,8 @@ int main(int argc, char **argv)
                                 BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
                                 &local_err);
             if (local_err) {
-                error_report("Failed to parse detect_zeroes mode: %s",
-                             error_get_pretty(local_err));
+                error_reportf_err(local_err,
+                                  "Failed to parse detect_zeroes mode: ");
                 exit(EXIT_FAILURE);
             }
             if (detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP &&
@@ -703,8 +703,8 @@ int main(int argc, char **argv)
     srcpath = argv[optind];
     blk = blk_new_open("hda", srcpath, NULL, options, flags, &local_err);
     if (!blk) {
-        error_report("Failed to blk_new_open '%s': %s", argv[optind],
-                     error_get_pretty(local_err));
+        error_reportf_err(local_err, "Failed to blk_new_open '%s': ",
+                          argv[optind]);
         exit(EXIT_FAILURE);
     }
     bs = blk_bs(blk);
@@ -719,8 +719,7 @@ int main(int argc, char **argv)
                                                    &local_err);
     }
     if (ret < 0) {
-        error_report("Failed to load snapshot: %s",
-                     error_get_pretty(local_err));
+        error_reportf_err(local_err, "Failed to load snapshot: ");
         exit(EXIT_FAILURE);
     }
 
replay/replay.c +1 -2
index 0d33e82..e4673b3 100644
@@ -291,8 +291,7 @@ void replay_start(void)
     }
 
     if (replay_blockers) {
-        error_report("Record/replay: %s",
-                     error_get_pretty(replay_blockers->data));
+        error_reportf_err(replay_blockers->data, "Record/replay: ");
         exit(1);
     }
     if (!use_icount) {
tests/test-aio.c +1 -3
index f0b447e..6ccea98 100644
@@ -832,9 +832,7 @@ int main(int argc, char **argv)
 
     ctx = aio_context_new(&local_error);
     if (!ctx) {
-        error_report("Failed to create AIO Context: %s",
-                     error_get_pretty(local_error));
-        error_free(local_error);
+        error_reportf_err(local_error, "Failed to create AIO Context: ");
         exit(1);
     }
     src = aio_get_g_source(ctx);
tests/test-thread-pool.c +1 -3
index 153b8f5..ccdee39 100644
@@ -229,9 +229,7 @@ int main(int argc, char **argv)
 
     ctx = aio_context_new(&local_error);
     if (!ctx) {
-        error_report("Failed to create AIO Context: %s",
-                     error_get_pretty(local_error));
-        error_free(local_error);
+        error_reportf_err(local_error, "Failed to create AIO Context: ");
         exit(1);
     }
     pool = aio_get_thread_pool(ctx);
ui/vnc.c +1 -3
index b9c57ff..8f950ca 100644
@@ -3925,9 +3925,7 @@ int vnc_init_func(void *opaque, QemuOpts *opts, Error **errp)
     vnc_display_init(id);
     vnc_display_open(id, &local_err);
     if (local_err != NULL) {
-        error_report("Failed to start VNC server: %s",
-                     error_get_pretty(local_err));
-        error_free(local_err);
+        error_reportf_err(local_err, "Failed to start VNC server: ");
         exit(1);
     }
     return 0;
vl.c +2 -4
index 7548fa2..20a367b 100644
@@ -3043,7 +3043,7 @@ int main(int argc, char **argv, char **envp)
     runstate_init();
 
     if (qcrypto_init(&err) < 0) {
-        error_report("cannot initialize crypto: %s", error_get_pretty(err));
+        error_reportf_err(err, "cannot initialize crypto: ");
         exit(1);
     }
     rtc_clock = QEMU_CLOCK_HOST;
@@ -4649,9 +4649,7 @@ int main(int argc, char **argv, char **envp)
         Error *local_err = NULL;
         qemu_start_incoming_migration(incoming, &local_err);
         if (local_err) {
-            error_report("-incoming %s: %s", incoming,
-                         error_get_pretty(local_err));
-            error_free(local_err);
+            error_reportf_err(local_err, "-incoming %s: ", incoming);
             exit(1);
         }
     } else if (autostart) {
Signature · 1 line
2.4.3
Reviewed-by on v3 11/24
#13 lore raw

Re: [Qemu-devel] [PATCH v3 11/24] error: Use error_reportf_err() where it makes obvious sense

Quoted 29 lines · Markus Armbruster

Done with this Coccinelle semantic patch

    @@
    expression FMT, E, S;
    expression list ARGS;
    @@
    -    error_report(FMT, ARGS, error_get_pretty(E));
    +    error_reportf_err(E, FMT/*@@@*/, ARGS);
    (
    -    error_free(E);
    |
	 exit(S);
    |
	 abort();
    )

followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings.

We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints.

---

+++ b/arch_init.c

arch_init.c void do_acpitable_option(const QemuOpts *opts) · line 261

Quoted 7 lines
arch_init.c +1 -3
@@ -258,9 +258,7 @@ void do_acpitable_option(const QemuOpts *opts)
 
     acpi_table_add(opts, &err);
     if (err) {
-        error_report("Wrong acpi table provided: %s",
-                     error_get_pretty(err));
-        error_free(err);
+        error_reportf_err(err, "Wrong acpi table provided: ");

Bikeshedding: should error_reportf_err() automatically add the trailing ": " to the prefix, instead of having every caller express it? Would affect 10/24 as well. But I can't see a strong reason to add the churn it would cause for a respin, so I won't insist.

Signature · 2 lines
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org
#14 lore raw

Re: [Qemu-devel] [PATCH v3 11/24] error: Use error_reportf_err() where it makes obvious sense

Quoted 31 lines · Eric Blake
Quoted 30 lines · Markus Armbruster

Done with this Coccinelle semantic patch

    @@
    expression FMT, E, S;
    expression list ARGS;
    @@
    -    error_report(FMT, ARGS, error_get_pretty(E));
    +    error_reportf_err(E, FMT/*@@@*/, ARGS);
    (
    -    error_free(E);
    |
	 exit(S);
    |
	 abort();
    )

followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings.

We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints.

---

+++ b/arch_init.c

(quoted diff) +0 -0
@@ -258,9 +258,7 @@ void do_acpitable_option(const QemuOpts *opts)
 
Quoted 11 lines

arch_init.c void do_acpitable_option(const QemuOpts *opts) · line 261

Quoted 6 lines
arch_init.c +1 -3
     acpi_table_add(opts, &err);
     if (err) {
-        error_report("Wrong acpi table provided: %s",
-                     error_get_pretty(err));
-        error_free(err);
+        error_reportf_err(err, "Wrong acpi table provided: ");

Bikeshedding: should error_reportf_err() automatically add the trailing ": " to the prefix, instead of having every caller express it? Would affect 10/24 as well. But I can't see a strong reason to add the churn it would cause for a respin, so I won't insist.

I decided not to add ": " automatically, to make the prefix-ness of the argument a bit more obvious.

Quoted 1 line

Thanks!

#15 lore raw

PATCH v3 12/24 error: Use error_prepend() where it makes obvious sense

In reply to Markus Armbruster

Done with this Coccinelle semantic patch

    @@
    expression FMT, E1, E2;
    expression list ARGS;
    @@
    -    error_setg(E1, FMT, ARGS, error_get_pretty(E2));
    +    error_propagate(E1, E2);/*###*/
    +    error_prepend(E1, FMT/*@@@*/, ARGS);

followed by manual cleanup, first because I can't figure out how to make Coccinelle transform strings, and second to get rid of now superfluous error_propagate().

We now use or propagate the original error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. It also improves the message printed with &error_abort when we screw up (see commit 1e9b65b).

---
 block.c                         | 19 ++++++++-----------
 block/qcow2.c                   |  5 ++---
 block/qed.c                     |  5 ++---
 hw/block/dataplane/virtio-blk.c |  8 ++------
 hw/scsi/vhost-scsi.c            |  6 ++----
 hw/usb/bus.c                    |  6 +++---
 6 files changed, 19 insertions(+), 30 deletions(-)
block.c +8 -11
index 4b40cb2..32bd889 100644
@@ -1223,14 +1223,12 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
     assert(bs->backing == NULL);
     ret = bdrv_open_inherit(&backing_hd,
                             *backing_filename ? backing_filename : NULL,
-                            NULL, options, 0, bs, &child_backing, &local_err);
+                            NULL, options, 0, bs, &child_backing, errp);
     if (ret < 0) {
         bdrv_unref(backing_hd);
         backing_hd = NULL;
         bs->open_flags |= BDRV_O_NO_BACKING;
-        error_setg(errp, "Could not open backing file: %s",
-                   error_get_pretty(local_err));
-        error_free(local_err);
+        error_prepend(errp, "Could not open backing file: ");
         goto free_exit;
     }
 
@@ -1333,12 +1331,11 @@ int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
     opts = qemu_opts_create(bdrv_qcow2.create_opts, NULL, 0,
                             &error_abort);
     qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size, &error_abort);
-    ret = bdrv_create(&bdrv_qcow2, tmp_filename, opts, &local_err);
+    ret = bdrv_create(&bdrv_qcow2, tmp_filename, opts, errp);
     qemu_opts_del(opts);
     if (ret < 0) {
-        error_setg(errp, "Could not create temporary overlay '%s': %s",
-                   tmp_filename, error_get_pretty(local_err));
-        error_free(local_err);
+        error_prepend(errp, "Could not create temporary overlay '%s': ",
+                      tmp_filename);
         goto out;
     }
 
@@ -3482,9 +3479,9 @@ bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
     if (!QLIST_EMPTY(&bs->op_blockers[op])) {
         blocker = QLIST_FIRST(&bs->op_blockers[op]);
         if (errp) {
-            error_setg(errp, "Node '%s' is busy: %s",
-                       bdrv_get_device_or_node_name(bs),
-                       error_get_pretty(blocker->reason));
+            *errp = error_copy(blocker->reason);
+            error_prepend(errp, "Node '%s' is busy: ",
+                          bdrv_get_device_or_node_name(bs));
         }
         return true;
     }
block/qcow2.c +2 -3
index 5b59fa3..a07531e 100644
@@ -1716,9 +1716,8 @@ static void qcow2_invalidate_cache(BlockDriverState *bs, Error **errp)
     ret = qcow2_open(bs, options, flags, &local_err);
     QDECREF(options);
     if (local_err) {
-        error_setg(errp, "Could not reopen qcow2 layer: %s",
-                   error_get_pretty(local_err));
-        error_free(local_err);
+        error_propagate(errp, local_err);
+        error_prepend(errp, "Could not reopen qcow2 layer: ");
         return;
     } else if (ret < 0) {
         error_setg_errno(errp, -ret, "Could not reopen qcow2 layer");
block/qed.c +2 -3
index 9b88895..31f4cc9 100644
@@ -1611,9 +1611,8 @@ static void bdrv_qed_invalidate_cache(BlockDriverState *bs, Error **errp)
     memset(s, 0, sizeof(BDRVQEDState));
     ret = bdrv_qed_open(bs, NULL, bs->open_flags, &local_err);
     if (local_err) {
-        error_setg(errp, "Could not reopen qed layer: %s",
-                   error_get_pretty(local_err));
-        error_free(local_err);
+        error_propagate(errp, local_err);
+        error_prepend(errp, "Could not reopen qed layer: ");
         return;
     } else if (ret < 0) {
         error_setg_errno(errp, -ret, "Could not reopen qed layer");
hw/block/dataplane/virtio-blk.c +2 -6
index c57f293..df77ba8 100644
@@ -142,7 +142,6 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *conf,
                                   Error **errp)
 {
     VirtIOBlockDataPlane *s;
-    Error *local_err = NULL;
     BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
     VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
 
@@ -163,11 +162,8 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *conf,
     /* If dataplane is (re-)enabled while the guest is running there could be
      * block jobs that can conflict.
      */
-    if (blk_op_is_blocked(conf->conf.blk, BLOCK_OP_TYPE_DATAPLANE,
-                          &local_err)) {
-        error_setg(errp, "cannot start dataplane thread: %s",
-                   error_get_pretty(local_err));
-        error_free(local_err);
+    if (blk_op_is_blocked(conf->conf.blk, BLOCK_OP_TYPE_DATAPLANE, errp)) {
+        error_prepend(errp, "cannot start dataplane thread: ");
         return;
     }
 
hw/scsi/vhost-scsi.c +2 -4
index 00cdac6..7bc8288 100644
@@ -217,11 +217,9 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
     }
 
     if (vs->conf.vhostfd) {
-        vhostfd = monitor_fd_param(cur_mon, vs->conf.vhostfd, &err);
+        vhostfd = monitor_fd_param(cur_mon, vs->conf.vhostfd, errp);
         if (vhostfd == -1) {
-            error_setg(errp, "vhost-scsi: unable to parse vhostfd: %s",
-                       error_get_pretty(err));
-            error_free(err);
+            error_prepend(errp, "vhost-scsi: unable to parse vhostfd: ");
             return;
         }
     } else {
hw/usb/bus.c +3 -3
index 26ab67f..1bbe930 100644
@@ -329,9 +329,9 @@ static USBDevice *usb_try_create_simple(USBBus *bus, const char *name,
     }
     object_property_set_bool(OBJECT(dev), true, "realized", &err);
     if (err) {
-        error_setg(errp, "Failed to initialize USB device '%s': %s",
-                   name, error_get_pretty(err));
-        error_free(err);
+        error_propagate(errp, err);
+        error_prepend(errp, "Failed to initialize USB device '%s': ",
+                      name);
         object_unparent(OBJECT(dev));
         return NULL;
     }
Signature · 1 line
2.4.3
#16 lore raw

PATCH v3 13/24 spapr: Use error_reportf_err()

In reply to Markus Armbruster

Not caught by Coccinelle, because we report the error only conditionally here.

---
 hw/ppc/spapr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
hw/ppc/spapr.c +4 -3
index addb9fc..440b56e 100644
@@ -122,10 +122,11 @@ static XICSState *xics_system_init(MachineState *machine,
             icp = try_create_xics(TYPE_KVM_XICS, nr_servers, nr_irqs, &err);
         }
         if (machine_kernel_irqchip_required(machine) && !icp) {
-            error_report("kernel_irqchip requested but unavailable: %s",
-                         error_get_pretty(err));
+            error_reportf_err(err,
+                              "kernel_irqchip requested but unavailable: ");
+        } else {
+            error_free(err);
         }
-        error_free(err);
     }
 
     if (!icp) {
Signature · 1 line
2.4.3
#17 lore raw

PATCH v3 14/24 migration: Use error_reportf_err() instead of monitor_printf()

In reply to Markus Armbruster

Both error_reportf_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_reportf_err() reports to stderr.

Both changed functions are HMP command handlers. These should only run within an HMP monitor.

Unlike monitor_printf(), error_reportf_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I don't think the errors touched in this commit can come with hints.

---
 migration/savevm.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
migration/savevm.c +6 -8
index e277b72..bcaeb70 100644
@@ -1927,10 +1927,9 @@ void hmp_savevm(Monitor *mon, const QDict *qdict)
 
     /* Delete old snapshots of the same name */
     if (name && bdrv_all_delete_snapshot(name, &bs1, &local_err) < 0) {
-        monitor_printf(mon,
-                       "Error while deleting snapshot on device '%s': %s\n",
-                       bdrv_get_device_name(bs1), error_get_pretty(local_err));
-        error_free(local_err);
+        error_reportf_err(local_err,
+                          "Error while deleting snapshot on device '%s': ",
+                          bdrv_get_device_name(bs1));
         return;
     }
 
@@ -2108,10 +2107,9 @@ void hmp_delvm(Monitor *mon, const QDict *qdict)
     const char *name = qdict_get_str(qdict, "name");
 
     if (bdrv_all_delete_snapshot(name, &bs, &err) < 0) {
-        monitor_printf(mon,
-                       "Error while deleting snapshot on device '%s': %s\n",
-                       bdrv_get_device_name(bs), error_get_pretty(err));
-        error_free(err);
+        error_reportf_err(err,
+                          "Error while deleting snapshot on device '%s': ",
+                          bdrv_get_device_name(bs));
     }
 }
 
Signature · 1 line
2.4.3
#18 lore raw

PATCH v3 15/24 qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()

In reply to Markus Armbruster

Just three instances left.

---
 qemu-io.c                  |  8 +++-----
 qemu-nbd.c                 |  2 +-
 tests/qemu-iotests/059.out |  8 ++++----
 tests/qemu-iotests/060.out |  2 +-
 tests/qemu-iotests/069.out |  2 +-
 tests/qemu-iotests/070.out |  2 +-
 tests/qemu-iotests/075.out | 14 +++++++-------
 tests/qemu-iotests/076.out |  6 +++---
 tests/qemu-iotests/078.out | 12 ++++++------
 tests/qemu-iotests/080.out | 36 ++++++++++++++++++------------------
 tests/qemu-iotests/083.out | 34 +++++++++++++++++-----------------
 tests/qemu-iotests/088.out | 12 ++++++------
 tests/qemu-iotests/092.out | 24 ++++++++++++------------
 tests/qemu-iotests/103.out |  8 ++++----
 tests/qemu-iotests/114.out |  2 +-
 tests/qemu-iotests/116.out | 14 +++++++-------
 tests/qemu-iotests/131.out |  2 +-
 17 files changed, 93 insertions(+), 95 deletions(-)
qemu-io.c +3 -5
index 269f17c..d47228a 100644
@@ -57,17 +57,15 @@ static int openfile(char *name, int flags, QDict *opts)
     BlockDriverState *bs;
 
     if (qemuio_blk) {
-        fprintf(stderr, "file open already, try 'help close'\n");
+        error_report("file open already, try 'help close'");
         QDECREF(opts);
         return 1;
     }
 
     qemuio_blk = blk_new_open("hda", name, NULL, opts, flags, &local_err);
     if (!qemuio_blk) {
-        fprintf(stderr, "%s: can't open%s%s: %s\n", progname,
-                name ? " device " : "", name ?: "",
-                error_get_pretty(local_err));
-        error_free(local_err);
+        error_reportf_err(local_err, "can't open%s%s: ",
+                          name ? " device " : "", name ?: "");
         return 1;
     }
 
qemu-nbd.c +1 -1
index f9fce4a..99df01f 100644
@@ -257,7 +257,7 @@ static void *nbd_client_thread(void *arg)
     fd = open(device, O_RDWR);
     if (fd < 0) {
         /* Linux-only, we can use %m in printf.  */
-        fprintf(stderr, "Failed to open %s: %m\n", device);
+        error_report("Failed to open %s: %m", device);
         goto out_socket;
     }
 
tests/qemu-iotests/059.out +4 -4
index 00057fe..d28df5b 100644
@@ -2,17 +2,17 @@ QA output created by 059
 
 === Testing invalid granularity ===
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.vmdk: Invalid granularity, image may be corrupt
+can't open device TEST_DIR/t.vmdk: Invalid granularity, image may be corrupt
 no file open, try 'help open'
 
 === Testing too big L2 table size ===
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.vmdk: L2 table size too big
+can't open device TEST_DIR/t.vmdk: L2 table size too big
 no file open, try 'help open'
 
 === Testing too big L1 table size ===
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.vmdk: L1 size too big
+can't open device TEST_DIR/t.vmdk: L1 size too big
 no file open, try 'help open'
 
 === Testing monolithicFlat creation and opening ===
@@ -2055,7 +2055,7 @@ wrote 512/512 bytes at offset 10240
 
 === Testing monolithicFlat with internally generated JSON file name ===
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 subformat=monolithicFlat
-qemu-io: can't open: Cannot use relative extent paths with VMDK descriptor file 'json:{"image": {"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, "driver": "blkdebug", "inject-error.0.event": "read_aio"}'
+can't open: Cannot use relative extent paths with VMDK descriptor file 'json:{"image": {"driver": "file", "filename": "TEST_DIR/t.IMGFMT"}, "driver": "blkdebug", "inject-error.0.event": "read_aio"}'
 
 === Testing version 3 ===
 image: TEST_DIR/iotest-version3.IMGFMT
tests/qemu-iotests/060.out +1 -1
index 7511189..5d40206 100644
@@ -20,7 +20,7 @@ Format specific information:
     lazy refcounts: false
     refcount bits: 16
     corrupt: true
-qemu-io: can't open device TEST_DIR/t.IMGFMT: IMGFMT: Image is corrupt; cannot be opened read/write
+can't open device TEST_DIR/t.IMGFMT: IMGFMT: Image is corrupt; cannot be opened read/write
 read 512/512 bytes at offset 0
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
tests/qemu-iotests/069.out +1 -1
index c78e8c2..f975856 100644
@@ -4,5 +4,5 @@ QA output created by 069
 
 Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=131072
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base
-qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base': No such file or directory
+can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base': No such file or directory
 *** done
tests/qemu-iotests/070.out +1 -1
index ca74383..ffd4251 100644
@@ -1,7 +1,7 @@
 QA output created by 070
 
 === Verify open image read-only fails, due to dirty log ===
-qemu-io: can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed.  To replay the log, execute:
+can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed.  To replay the log, execute:
  qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted
  no file open, try 'help open'
 === Verify open image replays log  ===
tests/qemu-iotests/075.out +7 -7
index 5f1d6c1..87beae4 100644
@@ -9,30 +9,30 @@ read 512/512 bytes at offset 1048064
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == block_size must be a multiple of 512 ==
-qemu-io: can't open device TEST_DIR/simple-pattern.cloop: block_size 513 must be a multiple of 512
+can't open device TEST_DIR/simple-pattern.cloop: block_size 513 must be a multiple of 512
 no file open, try 'help open'
 
 == block_size cannot be zero ==
-qemu-io: can't open device TEST_DIR/simple-pattern.cloop: block_size cannot be zero
+can't open device TEST_DIR/simple-pattern.cloop: block_size cannot be zero
 no file open, try 'help open'
 
 == huge block_size ===
-qemu-io: can't open device TEST_DIR/simple-pattern.cloop: block_size 4294966784 must be 64 MB or less
+can't open device TEST_DIR/simple-pattern.cloop: block_size 4294966784 must be 64 MB or less
 no file open, try 'help open'
 
 == offsets_size overflow ===
-qemu-io: can't open device TEST_DIR/simple-pattern.cloop: n_blocks 4294967295 must be 536870911 or less
+can't open device TEST_DIR/simple-pattern.cloop: n_blocks 4294967295 must be 536870911 or less
 no file open, try 'help open'
 
 == refuse images that require too many offsets ===
-qemu-io: can't open device TEST_DIR/simple-pattern.cloop: image requires too many offsets, try increasing block size
+can't open device TEST_DIR/simple-pattern.cloop: image requires too many offsets, try increasing block size
 no file open, try 'help open'
 
 == refuse images with non-monotonically increasing offsets ==
-qemu-io: can't open device TEST_DIR/simple-pattern.cloop: offsets not monotonically increasing at index 1, image file is corrupt
+can't open device TEST_DIR/simple-pattern.cloop: offsets not monotonically increasing at index 1, image file is corrupt
 no file open, try 'help open'
 
 == refuse images with invalid compressed block size ==
-qemu-io: can't open device TEST_DIR/simple-pattern.cloop: invalid compressed block size at index 1, image file is corrupt
+can't open device TEST_DIR/simple-pattern.cloop: invalid compressed block size at index 1, image file is corrupt
 no file open, try 'help open'
 *** done
tests/qemu-iotests/076.out +3 -3
index b0000ae..72645b2 100644
@@ -5,15 +5,15 @@ read 65536/65536 bytes at offset 0
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == Negative catalog size ==
-qemu-io: can't open device TEST_DIR/parallels-v1: Catalog too large
+can't open device TEST_DIR/parallels-v1: Catalog too large
 no file open, try 'help open'
 
 == Overflow in catalog allocation ==
-qemu-io: can't open device TEST_DIR/parallels-v1: Catalog too large
+can't open device TEST_DIR/parallels-v1: Catalog too large
 no file open, try 'help open'
 
 == Zero sectors per track ==
-qemu-io: can't open device TEST_DIR/parallels-v1: Invalid image: Zero sectors per track
+can't open device TEST_DIR/parallels-v1: Invalid image: Zero sectors per track
 no file open, try 'help open'
 
 == Read from a valid v2 image ==
tests/qemu-iotests/078.out +6 -6
index ca18d2e..42b8a83 100644
@@ -5,24 +5,24 @@ read 512/512 bytes at offset 0
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == Negative catalog size ==
-qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too large
+can't open device TEST_DIR/empty.bochs: Catalog size is too large
 no file open, try 'help open'
 
 == Overflow for catalog size * sizeof(uint32_t) ==
-qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too large
+can't open device TEST_DIR/empty.bochs: Catalog size is too large
 no file open, try 'help open'
 
 == Too small catalog bitmap for image size ==
-qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
+can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
+can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
 no file open, try 'help open'
 
 == Negative extent size ==
-qemu-io: can't open device TEST_DIR/empty.bochs: Extent size 2147483648 is too large
+can't open device TEST_DIR/empty.bochs: Extent size 2147483648 is too large
 no file open, try 'help open'
 
 == Zero extent size ==
-qemu-io: can't open device TEST_DIR/empty.bochs: Extent size must be at least 512
+can't open device TEST_DIR/empty.bochs: Extent size must be at least 512
 no file open, try 'help open'
 *** done
tests/qemu-iotests/080.out +18 -18
index 6061d84..0daac48 100644
@@ -2,46 +2,46 @@ QA output created by 080
 
 == Huge header size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
+can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
+can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
 no file open, try 'help open'
 
 == Huge unknown header extension ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: Invalid backing file offset
+can't open device TEST_DIR/t.qcow2: Invalid backing file offset
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Header extension too large
+can't open device TEST_DIR/t.qcow2: Header extension too large
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Header extension too large
+can't open device TEST_DIR/t.qcow2: Header extension too large
 no file open, try 'help open'
 
 == Huge refcount table size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: Reference count table too large
+can't open device TEST_DIR/t.qcow2: Reference count table too large
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Reference count table too large
+can't open device TEST_DIR/t.qcow2: Reference count table too large
 no file open, try 'help open'
 
 == Misaligned refcount table ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: Invalid reference count table offset
+can't open device TEST_DIR/t.qcow2: Invalid reference count table offset
 no file open, try 'help open'
 
 == Huge refcount offset ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: Invalid reference count table offset
+can't open device TEST_DIR/t.qcow2: Invalid reference count table offset
 no file open, try 'help open'
 
 == Invalid snapshot table ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: Too many snapshots
+can't open device TEST_DIR/t.qcow2: Too many snapshots
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Too many snapshots
+can't open device TEST_DIR/t.qcow2: Too many snapshots
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Invalid snapshot table offset
+can't open device TEST_DIR/t.qcow2: Invalid snapshot table offset
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Invalid snapshot table offset
+can't open device TEST_DIR/t.qcow2: Invalid snapshot table offset
 no file open, try 'help open'
 
 == Hitting snapshot table size limit ==
@@ -52,13 +52,13 @@ read 512/512 bytes at offset 0
 
 == Invalid L1 table ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: Active L1 table too large
+can't open device TEST_DIR/t.qcow2: Active L1 table too large
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Active L1 table too large
+can't open device TEST_DIR/t.qcow2: Active L1 table too large
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Invalid L1 table offset
+can't open device TEST_DIR/t.qcow2: Invalid L1 table offset
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Invalid L1 table offset
+can't open device TEST_DIR/t.qcow2: Invalid L1 table offset
 no file open, try 'help open'
 
 == Invalid L1 table (with internal snapshot in the image) ==
@@ -67,7 +67,7 @@ qemu-img: Could not open 'TEST_DIR/t.IMGFMT': L1 table is too small
 
 == Invalid backing file size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow2: Backing file name too long
+can't open device TEST_DIR/t.qcow2: Backing file name too long
 no file open, try 'help open'
 
 == Invalid L2 entry (huge physical offset) ==
tests/qemu-iotests/083.out +17 -17
index 8c1441b..78cc49a 100644
@@ -1,52 +1,52 @@
 QA output created by 083
 === Check disconnect before neg1 ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect after neg1 ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect 8 neg1 ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect 16 neg1 ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect before export ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect after export ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect 4 export ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect 12 export ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect 16 export ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect before neg2 ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect after neg2 ===
@@ -56,12 +56,12 @@ read failed: Input/output error
 
 === Check disconnect 8 neg2 ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect 10 neg2 ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT:exportname=foo
+can't open device nbd:127.0.0.1:PORT:exportname=foo
 no file open, try 'help open'
 
 === Check disconnect before request ===
@@ -107,27 +107,27 @@ read 512/512 bytes at offset 0
 
 === Check disconnect before neg-classic ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT
+can't open device nbd:127.0.0.1:PORT
 no file open, try 'help open'
 
 === Check disconnect 8 neg-classic ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT
+can't open device nbd:127.0.0.1:PORT
 no file open, try 'help open'
 
 === Check disconnect 16 neg-classic ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT
+can't open device nbd:127.0.0.1:PORT
 no file open, try 'help open'
 
 === Check disconnect 24 neg-classic ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT
+can't open device nbd:127.0.0.1:PORT
 no file open, try 'help open'
 
 === Check disconnect 28 neg-classic ===
 
-qemu-io: can't open device nbd:127.0.0.1:PORT
+can't open device nbd:127.0.0.1:PORT
 no file open, try 'help open'
 
 === Check disconnect after neg-classic ===
tests/qemu-iotests/088.out +6 -6
index 6e6bfca..a2a83b8 100644
@@ -2,16 +2,16 @@ QA output created by 088
 
 == Invalid block size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 0
+can't open device TEST_DIR/t.vpc: Invalid block size 0
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 0
+can't open device TEST_DIR/t.vpc: Invalid block size 0
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 128
+can't open device TEST_DIR/t.vpc: Invalid block size 128
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 128
+can't open device TEST_DIR/t.vpc: Invalid block size 128
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 305419896
+can't open device TEST_DIR/t.vpc: Invalid block size 305419896
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.vpc: Invalid block size 305419896
+can't open device TEST_DIR/t.vpc: Invalid block size 305419896
 no file open, try 'help open'
 *** done
tests/qemu-iotests/092.out +12 -12
index c5c60f9..e18f54c 100644
@@ -2,37 +2,37 @@ QA output created by 092
 
 == Invalid cluster size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
 no file open, try 'help open'
 
 == Invalid L2 table size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
+can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
 no file open, try 'help open'
 
 == Invalid size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow: Image too large
+can't open device TEST_DIR/t.qcow: Image too large
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: Image too large
+can't open device TEST_DIR/t.qcow: Image too large
 no file open, try 'help open'
 
 == Invalid backing file length ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
-qemu-io: can't open device TEST_DIR/t.qcow: Backing file name too long
+can't open device TEST_DIR/t.qcow: Backing file name too long
 no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow: Backing file name too long
+can't open device TEST_DIR/t.qcow: Backing file name too long
 no file open, try 'help open'
 *** done
tests/qemu-iotests/103.out +4 -4
index d05f49f..b7aaadf 100644
@@ -5,10 +5,10 @@ wrote 65536/65536 bytes at offset 0
 
 === Testing invalid option combinations ===
 
-qemu-io: can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set the same time
-qemu-io: can't open device TEST_DIR/t.IMGFMT: l2-cache-size may not exceed cache-size
-qemu-io: can't open device TEST_DIR/t.IMGFMT: refcount-cache-size may not exceed cache-size
-qemu-io: can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set the same time
+can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set the same time
+can't open device TEST_DIR/t.IMGFMT: l2-cache-size may not exceed cache-size
+can't open device TEST_DIR/t.IMGFMT: refcount-cache-size may not exceed cache-size
+can't open device TEST_DIR/t.IMGFMT: cache-size, l2-cache-size and refcount-cache-size may not be set the same time
 
 === Testing valid option combinations ===
 
tests/qemu-iotests/114.out +1 -1
index 6a2c750..b6d10e4 100644
@@ -7,7 +7,7 @@ virtual size: 64M (67108864 bytes)
 cluster_size: 65536
 backing file: TEST_DIR/t.IMGFMT.base
 backing file format: foo
-qemu-io: can't open device TEST_DIR/t.qcow2: Could not open backing file: Unknown driver 'foo'
+can't open device TEST_DIR/t.qcow2: Could not open backing file: Unknown driver 'foo'
 read 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 *** done
tests/qemu-iotests/116.out +7 -7
index b679cee..1f11d44 100644
@@ -2,36 +2,36 @@ QA output created by 116
 
 == truncated header cluster ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
 no file open, try 'help open'
 
 == invalid header magic ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-qemu-io: can't open device TEST_DIR/t.qed: Image not in QED format
+can't open device TEST_DIR/t.qed: Image not in QED format
 no file open, try 'help open'
 
 == invalid cluster size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
 no file open, try 'help open'
 
 == invalid table size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
 no file open, try 'help open'
 
 == invalid header size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
 no file open, try 'help open'
 
 == invalid L1 table offset ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
 no file open, try 'help open'
 
 == invalid image size ==
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
-qemu-io: can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
+can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
 no file open, try 'help open'
 *** done
tests/qemu-iotests/131.out +1 -1
index 021a04c..ae2412e 100644
@@ -22,7 +22,7 @@ read 32768/32768 bytes at offset 163840
 read 32768/32768 bytes at offset 0
 32 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 == Corrupt image ==
-qemu-io: can't open device TEST_DIR/t.parallels: parallels: Image was not closed correctly; cannot be opened read/write
+can't open device TEST_DIR/t.parallels: parallels: Image was not closed correctly; cannot be opened read/write
 no file open, try 'help open'
 ERROR image was not closed correctly
 
Signature · 1 line
2.4.3
#19 lore raw

PATCH v3 16/24 error: Strip trailing '\n' from error string arguments (again)

In reply to Markus Armbruster

Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. Tracked down with the Coccinelle semantic patch from commit 312fd5f.

Cc Fam Zheng <[email protected]>
Cc Peter Crosthwaite <[email protected]>
Cc Bharata B Rao <[email protected]>
Cc Dominik Dingel <[email protected]>
Cc David Hildenbrand <[email protected]>
Cc Jason J. Herne <[email protected]>
Cc Stefan Berger <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
Cc Changchun Ouyang <[email protected]>
Cc zhanghailiang <[email protected]>
Cc Pavel Fedin <[email protected]>
---
 block/vmdk.c              |  4 ++--
 hw/arm/xlnx-zynqmp.c      |  2 +-
 hw/ppc/spapr.c            |  3 ++-
 hw/s390x/ipl.c            |  8 ++++----
 hw/s390x/s390-skeys-kvm.c |  2 +-
 hw/s390x/s390-skeys.c     | 16 ++++++++--------
 hw/tpm/tpm_tis.c          |  2 +-
 migration/ram.c           |  2 +-
 migration/savevm.c        |  4 ++--
 net/vhost-user.c          |  6 +++---
 qemu-nbd.c                |  4 ++--
 qga/commands-posix.c      |  2 +-
 target-arm/cpu.c          |  2 +-
 target-arm/machine.c      |  4 ++--
 14 files changed, 31 insertions(+), 30 deletions(-)
block/vmdk.c +2 -2
index 6f819e4..b4a224e 100644
@@ -1494,8 +1494,8 @@ static int vmdk_write(BlockDriverState *bs, int64_t sector_num,
 
     if (sector_num > bs->total_sectors) {
         error_report("Wrong offset: sector_num=0x%" PRIx64
-                " total_sectors=0x%" PRIx64 "\n",
-                sector_num, bs->total_sectors);
+                     " total_sectors=0x%" PRIx64,
+                     sector_num, bs->total_sectors);
         return -EIO;
     }
 
hw/arm/xlnx-zynqmp.c +1 -1
index 87553bb..20a3b2b 100644
@@ -227,7 +227,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     }
 
     if (!s->boot_cpu_ptr) {
-        error_setg(errp, "ZynqMP Boot cpu %s not found\n", boot_cpu);
+        error_setg(errp, "ZynqMP Boot cpu %s not found", boot_cpu);
         return;
     }
 
hw/ppc/spapr.c +2 -1
index 440b56e..3bfb957 100644
@@ -1833,7 +1833,8 @@ static void ppc_spapr_init(MachineState *machine)
         ram_addr_t hotplug_mem_size = machine->maxram_size - machine->ram_size;
 
         if (machine->ram_slots > SPAPR_MAX_RAM_SLOTS) {
-            error_report("Specified number of memory slots %"PRIu64" exceeds max supported %d\n",
+            error_report("Specified number of memory slots %" PRIu64
+                         " exceeds max supported %d",
                          machine->ram_slots, SPAPR_MAX_RAM_SLOTS);
             exit(EXIT_FAILURE);
         }
hw/s390x/ipl.c +4 -4
index b91fcc6..e100428 100644
@@ -94,7 +94,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
 
         bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
         if (bios_filename == NULL) {
-            error_setg(&l_err, "could not find stage1 bootloader\n");
+            error_setg(&l_err, "could not find stage1 bootloader");
             goto error;
         }
 
@@ -113,7 +113,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
         g_free(bios_filename);
 
         if (bios_size == -1) {
-            error_setg(&l_err, "could not load bootloader '%s'\n", bios_name);
+            error_setg(&l_err, "could not load bootloader '%s'", bios_name);
             goto error;
         }
 
@@ -128,7 +128,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
             kernel_size = load_image_targphys(ipl->kernel, 0, ram_size);
         }
         if (kernel_size < 0) {
-            error_setg(&l_err, "could not load kernel '%s'\n", ipl->kernel);
+            error_setg(&l_err, "could not load kernel '%s'", ipl->kernel);
             goto error;
         }
         /*
@@ -156,7 +156,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
             initrd_size = load_image_targphys(ipl->initrd, initrd_offset,
                                               ram_size - initrd_offset);
             if (initrd_size == -1) {
-                error_setg(&l_err, "could not load initrd '%s'\n", ipl->initrd);
+                error_setg(&l_err, "could not load initrd '%s'", ipl->initrd);
                 goto error;
             }
 
hw/s390x/s390-skeys-kvm.c +1 -1
index 682949a..eaa37ba 100644
@@ -21,7 +21,7 @@ static int kvm_s390_skeys_enabled(S390SKeysState *ss)
 
     r = skeyclass->get_skeys(ss, 0, 1, &single_key);
     if (r != 0 && r != KVM_S390_GET_SKEYS_NONE) {
-        error_report("S390_GET_KEYS error %d\n", r);
+        error_report("S390_GET_KEYS error %d", r);
     }
     return (r == 0);
 }
hw/s390x/s390-skeys.c +8 -8
index 4af1558..f2b732e 100644
@@ -191,8 +191,8 @@ static int qemu_s390_skeys_set(S390SKeysState *ss, uint64_t start_gfn,
     /* Check for uint64 overflow and access beyond end of key data */
     if (start_gfn + count > skeydev->key_count || start_gfn + count < count) {
         error_report("Error: Setting storage keys for page beyond the end "
-                "of memory: gfn=%" PRIx64 " count=%" PRId64 "\n", start_gfn,
-                count);
+                     "of memory: gfn=%" PRIx64 " count=%" PRId64,
+                     start_gfn, count);
         return -EINVAL;
     }
 
@@ -211,8 +211,8 @@ static int qemu_s390_skeys_get(S390SKeysState *ss, uint64_t start_gfn,
     /* Check for uint64 overflow and access beyond end of key data */
     if (start_gfn + count > skeydev->key_count || start_gfn + count < count) {
         error_report("Error: Getting storage keys for page beyond the end "
-                "of memory: gfn=%" PRIx64 " count=%" PRId64 "\n", start_gfn,
-                count);
+                     "of memory: gfn=%" PRIx64 " count=%" PRId64,
+                     start_gfn, count);
         return -EINVAL;
     }
 
@@ -256,7 +256,7 @@ static void s390_storage_keys_save(QEMUFile *f, void *opaque)
 
     buf = g_try_malloc(S390_SKEYS_BUFFER_SIZE);
     if (!buf) {
-        error_report("storage key save could not allocate memory\n");
+        error_report("storage key save could not allocate memory");
         goto end_stream;
     }
 
@@ -276,7 +276,7 @@ static void s390_storage_keys_save(QEMUFile *f, void *opaque)
                  * use S390_SKEYS_SAVE_FLAG_ERROR to indicate failure to the
                  * reading side.
                  */
-                error_report("S390_GET_KEYS error %d\n", error);
+                error_report("S390_GET_KEYS error %d", error);
                 memset(buf, 0, S390_SKEYS_BUFFER_SIZE);
                 eos = S390_SKEYS_SAVE_FLAG_ERROR;
             }
@@ -314,7 +314,7 @@ static int s390_storage_keys_load(QEMUFile *f, void *opaque, int version_id)
             uint8_t *buf = g_try_malloc(S390_SKEYS_BUFFER_SIZE);
 
             if (!buf) {
-                error_report("storage key load could not allocate memory\n");
+                error_report("storage key load could not allocate memory");
                 ret = -ENOMEM;
                 break;
             }
@@ -326,7 +326,7 @@ static int s390_storage_keys_load(QEMUFile *f, void *opaque, int version_id)
 
                 ret = skeyclass->set_skeys(ss, cur_gfn, cur_count, buf);
                 if (ret < 0) {
-                    error_report("S390_SET_KEYS error %d\n", ret);
+                    error_report("S390_SET_KEYS error %d", ret);
                     break;
                 }
                 handled_count += cur_count;
hw/tpm/tpm_tis.c +1 -1
index ff073d5..95fc66e 100644
@@ -1051,7 +1051,7 @@ static void tpm_tis_realizefn(DeviceState *dev, Error **errp)
 
     if (tis->irq_num > 15) {
         error_setg(errp, "tpm_tis: IRQ %d for TPM TIS is outside valid range "
-                   "of 0 to 15.\n", tis->irq_num);
+                   "of 0 to 15", tis->irq_num);
         return;
     }
 
migration/ram.c +1 -1
index 0490f00..5bfcca3 100644
@@ -2323,7 +2323,7 @@ static int ram_load_postcopy(QEMUFile *f)
             } else {
                 /* not the 1st TP within the HP */
                 if (host != (last_host + TARGET_PAGE_SIZE)) {
-                    error_report("Non-sequential target page %p/%p\n",
+                    error_report("Non-sequential target page %p/%p",
                                   host, last_host);
                     ret = -EINVAL;
                     break;
migration/savevm.c +2 -2
index bcaeb70..540eb28 100644
@@ -1563,8 +1563,8 @@ static int loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
     ret = qemu_get_buffer(mis->from_src_file, buffer, (int)length);
     if (ret != length) {
         g_free(buffer);
-        error_report("CMD_PACKAGED: Buffer receive fail ret=%d length=%d\n",
-                ret, length);
+        error_report("CMD_PACKAGED: Buffer receive fail ret=%d length=%d",
+                     ret, length);
         return (ret < 0) ? ret : -EAGAIN;
     }
     trace_loadvm_handle_cmd_packaged_received(ret);
net/vhost-user.c +3 -3
index b368a90..e4dd089 100644
@@ -82,15 +82,15 @@ static int vhost_user_start(int queues, NetClientState *ncs[])
         options.opaque      = s->chr;
         s->vhost_net = vhost_net_init(&options);
         if (!s->vhost_net) {
-            error_report("failed to init vhost_net for queue %d\n", i);
+            error_report("failed to init vhost_net for queue %d", i);
             goto err;
         }
 
         if (i == 0) {
             max_queues = vhost_net_get_max_queues(s->vhost_net);
             if (queues > max_queues) {
-                error_report("you are asking more queues than "
-                             "supported: %d\n", max_queues);
+                error_report("you are asking more queues than supported: %d",
+                             max_queues);
                 goto err;
             }
         }
qemu-nbd.c +2 -2
index 99df01f..023eacd 100644
@@ -554,7 +554,7 @@ int main(int argc, char **argv)
         case 'k':
             sockpath = optarg;
             if (sockpath[0] != '/') {
-                error_report("socket path must be absolute\n");
+                error_report("socket path must be absolute");
                 exit(EXIT_FAILURE);
             }
             break;
@@ -571,7 +571,7 @@ int main(int argc, char **argv)
                 exit(EXIT_FAILURE);
             }
             if (shared < 1) {
-                error_report("Shared device number must be greater than 0\n");
+                error_report("Shared device number must be greater than 0");
                 exit(EXIT_FAILURE);
             }
             break;
qga/commands-posix.c +1 -1
index c2ff970..ec0e997 100644
@@ -2247,7 +2247,7 @@ GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp)
          */
         if (errno != ENOENT) {
             error_setg_errno(errp, errno, "Can't open directory"
-                             "\"/sys/devices/system/memory/\"\n");
+                             "\"/sys/devices/system/memory/\"");
         }
         return NULL;
     }
target-arm/cpu.c +1 -1
index 35a1f12..775e0a4 100644
@@ -649,7 +649,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
         uint32_t nr = cpu->pmsav7_dregion;
 
         if (nr > 0xff) {
-            error_setg(errp, "PMSAv7 MPU #regions invalid %" PRIu32 "\n", nr);
+            error_setg(errp, "PMSAv7 MPU #regions invalid %" PRIu32, nr);
             return;
         }
 
target-arm/machine.c +2 -2
index 36a0d15..b1e1418 100644
@@ -337,11 +337,11 @@ const char *gicv3_class_name(void)
         return "kvm-arm-gicv3";
 #else
         error_report("KVM GICv3 acceleration is not supported on this "
-                     "platform\n");
+                     "platform");
 #endif
     } else {
         /* TODO: Software emulation is not implemented yet */
-        error_report("KVM is currently required for GICv3 emulation\n");
+        error_report("KVM is currently required for GICv3 emulation");
     }
 
     exit(1);
Signature · 1 line
2.4.3
#20 lore raw

PATCH v3 17/24 vmdk: Clean up control flow in vmdk_parse_extents() a bit

In reply to Markus Armbruster

Factor out loop stepping to turn a while-loop with goto into a for-loop with continue.

---
 block/vmdk.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)
block/vmdk.c +15 -13
index b4a224e..08fa3f3 100644
@@ -760,6 +760,17 @@ static int vmdk_open_sparse(BlockDriverState *bs, BdrvChild *file, int flags,
     }
 }
 
+static const char *next_line(const char *s)
+{
+    while (*s) {
+        if (*s == '\n') {
+            return s + 1;
+        }
+        s++;
+    }
+    return s;
+}
+
 static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
                               const char *desc_file_path, QDict *options,
                               Error **errp)
@@ -769,7 +780,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
     char access[11];
     char type[11];
     char fname[512];
-    const char *p = desc;
+    const char *p;
     int64_t sectors = 0;
     int64_t flat_offset;
     char *extent_path;
@@ -779,7 +790,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
     char extent_opt_prefix[32];
     Error *local_err = NULL;
 
-    while (*p) {
+    for (p = desc; *p; p = next_line(p)) {
         /* parse extent line in one of below formats:
          *
          * RW [size in sectors] FLAT "file-name.vmdk" OFFSET
@@ -791,7 +802,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
         matches = sscanf(p, "%10s %" SCNd64 " %10s \"%511[^\n\r\"]\" %" SCNd64,
                          access, &sectors, type, fname, &flat_offset);
         if (matches < 4 || strcmp(access, "RW")) {
-            goto next_line;
+            continue;
         } else if (!strcmp(type, "FLAT")) {
             if (matches != 5 || flat_offset < 0) {
                 error_setg(errp, "Invalid extent lines: \n%s", p);
@@ -813,7 +824,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
             (strcmp(type, "FLAT") && strcmp(type, "SPARSE") &&
              strcmp(type, "VMFS") && strcmp(type, "VMFSSPARSE")) ||
             (strcmp(access, "RW"))) {
-            goto next_line;
+            continue;
         }
 
         if (!path_is_absolute(fname) && !path_has_protocol(fname) &&
@@ -870,15 +881,6 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
             return -ENOTSUP;
         }
         extent->type = g_strdup(type);
-next_line:
-        /* move to next line */
-        while (*p) {
-            if (*p == '\n') {
-                p++;
-                break;
-            }
-            p++;
-        }
     }
     return 0;
 }
Signature · 1 line
2.4.3
#21 lore raw

PATCH v3 18/24 vmdk: Clean up "Invalid extent lines" error message

In reply to Markus Armbruster

vmdk_parse_extents() reports parse errors like this:

    error_setg(errp, "Invalid extent lines:\n%s", p);

where p points to the beginning of the malformed line in the image descriptor. This results in a multi-line error message

Invalid extent lines:
<first line that doesn't parse> <remaining text that may or may not parse, if any>

Error messages should not have newlines embedded. Since the remaining text is not helpful, we can simply report:

Invalid extent line: <first line that doesn't parse>

---
 block/vmdk.c               | 20 +++++++++++++-------
 tests/qemu-iotests/059.out |  4 +---
 2 files changed, 14 insertions(+), 10 deletions(-)
block/vmdk.c +13 -7
index 08fa3f3..2b5cb00 100644
@@ -780,7 +780,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
     char access[11];
     char type[11];
     char fname[512];
-    const char *p;
+    const char *p, *np;
     int64_t sectors = 0;
     int64_t flat_offset;
     char *extent_path;
@@ -805,19 +805,16 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
             continue;
         } else if (!strcmp(type, "FLAT")) {
             if (matches != 5 || flat_offset < 0) {
-                error_setg(errp, "Invalid extent lines: \n%s", p);
-                return -EINVAL;
+                goto invalid;
             }
         } else if (!strcmp(type, "VMFS")) {
             if (matches == 4) {
                 flat_offset = 0;
             } else {
-                error_setg(errp, "Invalid extent lines:\n%s", p);
-                return -EINVAL;
+                goto invalid;
             }
         } else if (matches != 4) {
-            error_setg(errp, "Invalid extent lines:\n%s", p);
-            return -EINVAL;
+            goto invalid;
         }
 
         if (sectors <= 0 ||
@@ -883,6 +880,15 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
         extent->type = g_strdup(type);
     }
     return 0;
+
+invalid:
+    np = next_line(p);
+    assert(np != p);
+    if (np[-1] == '\n') {
+        np--;
+    }
+    error_setg(errp, "Invalid extent line: %.*s", (int)(np - p), p);
+    return -EINVAL;
 }
 
 static int vmdk_open_desc_file(BlockDriverState *bs, int flags, char *buf,
tests/qemu-iotests/059.out +1 -3
index d28df5b..9d506cb 100644
@@ -2038,9 +2038,7 @@ Format specific information:
             format: FLAT
 
 === Testing malformed VMFS extent description line ===
-qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Invalid extent lines:
-RW 12582912 VMFS "dummy.IMGFMT" 1
-
+qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Invalid extent line: RW 12582912 VMFS "dummy.IMGFMT" 1
 
 === Testing truncated sparse ===
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=107374182400 subformat=monolithicSparse
Signature · 1 line
2.4.3
Reviewed-by on v3 18/24
#22 lore raw

Re: [Qemu-devel] [PATCH v3 18/24] vmdk: Clean up "Invalid extent lines" error message

Quoted 94 lines · Markus Armbruster

vmdk_parse_extents() reports parse errors like this:

    error_setg(errp, "Invalid extent lines:\n%s", p);

where p points to the beginning of the malformed line in the image descriptor. This results in a multi-line error message

Invalid extent lines:
<first line that doesn't parse> <remaining text that may or may not parse, if any>

Error messages should not have newlines embedded. Since the remaining text is not helpful, we can simply report:

Invalid extent line: <first line that doesn't parse>

---
 block/vmdk.c               | 20 +++++++++++++-------
 tests/qemu-iotests/059.out |  4 +---
 2 files changed, 14 insertions(+), 10 deletions(-)
block/vmdk.c +13 -7
index 08fa3f3..2b5cb00 100644
@@ -780,7 +780,7 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
     char access[11];
     char type[11];
     char fname[512];
-    const char *p;
+    const char *p, *np;
     int64_t sectors = 0;
     int64_t flat_offset;
     char *extent_path;
@@ -805,19 +805,16 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
             continue;
         } else if (!strcmp(type, "FLAT")) {
             if (matches != 5 || flat_offset < 0) {
-                error_setg(errp, "Invalid extent lines: \n%s", p);
-                return -EINVAL;
+                goto invalid;
             }
         } else if (!strcmp(type, "VMFS")) {
             if (matches == 4) {
                 flat_offset = 0;
             } else {
-                error_setg(errp, "Invalid extent lines:\n%s", p);
-                return -EINVAL;
+                goto invalid;
             }
         } else if (matches != 4) {
-            error_setg(errp, "Invalid extent lines:\n%s", p);
-            return -EINVAL;
+            goto invalid;
         }
 
         if (sectors <= 0 ||
@@ -883,6 +880,15 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
         extent->type = g_strdup(type);
     }
     return 0;
+
+invalid:
+    np = next_line(p);
+    assert(np != p);
+    if (np[-1] == '\n') {
+        np--;
+    }
+    error_setg(errp, "Invalid extent line: %.*s", (int)(np - p), p);
+    return -EINVAL;
 }
 
 static int vmdk_open_desc_file(BlockDriverState *bs, int flags, char *buf,
tests/qemu-iotests/059.out +1 -3
index d28df5b..9d506cb 100644
@@ -2038,9 +2038,7 @@ Format specific information:
             format: FLAT
 
 === Testing malformed VMFS extent description line ===
-qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Invalid extent lines:
-RW 12582912 VMFS "dummy.IMGFMT" 1
-
+qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Invalid extent line: RW 12582912 VMFS "dummy.IMGFMT" 1
 
 === Testing truncated sparse ===
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=107374182400 subformat=monolithicSparse
Signature · 1 line
2.4.3
#23 lore raw

PATCH v3 19/24 pci-assign: Clean up "Failed to assign" error messages

In reply to Markus Armbruster

The arguments of error_setg() & friends should yield a short error string without newlines.

Two places try to append additional help to the error message by embedding newlines in the error string. That's nice, but let's do it the right way, with error_append_hint().

---
 hw/i386/kvm/pci-assign.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
hw/i386/kvm/pci-assign.c +8 -8
index 0fd6923..eec1340 100644
@@ -770,7 +770,7 @@ static char *assign_failed_examine(const AssignedDevice *dev)
         "*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/"
         "pci-stub/bind\n"
         "*** $ echo \"%04x %04x\" > /sys/bus/pci/drivers/pci-stub/remove_id\n"
-        "***",
+        "***\n",
         ns, dev->host.domain, dev->host.bus, dev->host.slot,
         dev->host.function, vendor_id, device_id,
         dev->host.domain, dev->host.bus, dev->host.slot, dev->host.function,
@@ -778,7 +778,7 @@ static char *assign_failed_examine(const AssignedDevice *dev)
         dev->host.function, vendor_id, device_id);
 
 fail:
-    return g_strdup("Couldn't find out why.");
+    return g_strdup("Couldn't find out why.\n");
 }
 
 static void assign_device(AssignedDevice *dev, Error **errp)
@@ -812,8 +812,9 @@ static void assign_device(AssignedDevice *dev, Error **errp)
             char *cause;
 
             cause = assign_failed_examine(dev);
-            error_setg_errno(errp, -r, "Failed to assign device \"%s\"\n%s",
-                             dev->dev.qdev.id, cause);
+            error_setg_errno(errp, -r, "Failed to assign device \"%s\"",
+                             dev->dev.qdev.id);
+            error_append_hint(errp, "%s", cause);
             g_free(cause);
             break;
         }
@@ -912,11 +913,10 @@ retry:
             dev->features |= ASSIGNED_DEVICE_PREFER_MSI_MASK;
             goto retry;
         }
-        error_setg_errno(errp, -r,
-                         "Failed to assign irq for \"%s\"\n"
-                         "Perhaps you are assigning a device "
-                         "that shares an IRQ with another device?",
+        error_setg_errno(errp, -r, "Failed to assign irq for \"%s\"",
                          dev->dev.qdev.id);
+        error_append_hint(errp, "Perhaps you are assigning a device "
+                          "that shares an IRQ with another device?\n");
         return r;
     }
 
Signature · 1 line
2.4.3
Reviewed-by on v3 19/24
#24 lore raw

Re: [Qemu-devel] [PATCH v3 19/24] pci-assign: Clean up "Failed to assign" error messages

Quoted 54 lines · Markus Armbruster

The arguments of error_setg() & friends should yield a short error string without newlines.

Two places try to append additional help to the error message by embedding newlines in the error string. That's nice, but let's do it the right way, with error_append_hint().

---
 hw/i386/kvm/pci-assign.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
hw/i386/kvm/pci-assign.c +5 -5
index 0fd6923..eec1340 100644
@@ -770,7 +770,7 @@ static char *assign_failed_examine(const AssignedDevice *dev)
         "*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/"
         "pci-stub/bind\n"
         "*** $ echo \"%04x %04x\" > /sys/bus/pci/drivers/pci-stub/remove_id\n"
-        "***",
+        "***\n",
         ns, dev->host.domain, dev->host.bus, dev->host.slot,
         dev->host.function, vendor_id, device_id,
         dev->host.domain, dev->host.bus, dev->host.slot, dev->host.function,
@@ -778,7 +778,7 @@ static char *assign_failed_examine(const AssignedDevice *dev)
         dev->host.function, vendor_id, device_id);
 
 fail:
-    return g_strdup("Couldn't find out why.");
+    return g_strdup("Couldn't find out why.\n");
 }
 
 static void assign_device(AssignedDevice *dev, Error **errp)
@@ -812,8 +812,9 @@ static void assign_device(AssignedDevice *dev, Error **errp)
             char *cause;
 
             cause = assign_failed_examine(dev);
-            error_setg_errno(errp, -r, "Failed to assign device \"%s\"\n%s",
-                             dev->dev.qdev.id, cause);
+            error_setg_errno(errp, -r, "Failed to assign device \"%s\"",
+                             dev->dev.qdev.id);
+            error_append_hint(errp, "%s", cause);
             g_free(cause);
             break;
         }
@@ -912,11 +913,10 @@ retry:
             dev->features |= ASSIGNED_DEVICE_PREFER_MSI_MASK;
             goto retry;
         }
-        error_setg_errno(errp, -r,

hw/i386/kvm/pci-assign.c retry: · line 922

Quoted 10 lines
hw/i386/kvm/pci-assign.c +3 -3
-                         "Failed to assign irq for \"%s\"\n"
-                         "Perhaps you are assigning a device "
-                         "that shares an IRQ with another device?",
+        error_setg_errno(errp, -r, "Failed to assign irq for \"%s\"",
                          dev->dev.qdev.id);
+        error_append_hint(errp, "Perhaps you are assigning a device "
+                          "that shares an IRQ with another device?\n");
         return r;
     }
 
#25 lore raw

PATCH v3 20/24 vhdx: Fix "log that needs to be replayed" error message

In reply to Markus Armbruster

The arguments of error_setg_errno() should yield a short error string without newlines.

Here, we try to append additional help to the error message by embedding newlines in the error string. That's nice, but it's doesn't play nicely with the errno part. tests/qemu-iotests/070.out shows the resulting mess:

can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed. To replay the log, execute:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted

Switch to error_setg() and error_append_hint(). Result:

can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed To replay the log, run:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx'

---
 block/vhdx-log.c           | 13 +++++++------
 tests/qemu-iotests/070.out |  5 +++--
 2 files changed, 10 insertions(+), 8 deletions(-)
block/vhdx-log.c +7 -6
index 47ae4b1..ab86416 100644
@@ -784,12 +784,13 @@ int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed,
     if (logs.valid) {
         if (bs->read_only) {
             ret = -EPERM;
-            error_setg_errno(errp, EPERM,
-                             "VHDX image file '%s' opened read-only, but "
-                             "contains a log that needs to be replayed.  To "
-                             "replay the log, execute:\n qemu-img check -r "
-                             "all '%s'",
-                             bs->filename, bs->filename);
+            error_setg(errp,
+                       "VHDX image file '%s' opened read-only, but "
+                       "contains a log that needs to be replayed",
+                       bs->filename);
+            error_append_hint(errp,  "To replay the log, run:\n"
+                              "qemu-img check -r all '%s'\n",
+                              bs->filename);
             goto exit;
         }
         /* now flush the log */
tests/qemu-iotests/070.out +3 -2
index ffd4251..131a5b1 100644
@@ -1,8 +1,9 @@
 QA output created by 070
 
 === Verify open image read-only fails, due to dirty log ===
-can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed.  To replay the log, execute:
- qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted
+can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed
+To replay the log, run:
+qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx'
  no file open, try 'help open'
 === Verify open image replays log  ===
 read 18874368/18874368 bytes at offset 0
Signature · 1 line
2.4.3
#26 lore raw

PATCH v3 21/24 error: Clean up errors with embedded newlines (again)

In reply to Markus Armbruster

The arguments of error_report() should yield a short error string without newlines.

A few places try to print additional help after the error message by embedding newlines in the error string. That's nice, but let's do it the right way. Commit 474c213 cleaned up some, but they keep coming back. Offenders tracked down with the Coccinelle semantic patch from commit 312fd5f.

---
 hw/i386/pc.c | 4 ++--
 kvm-all.c    | 6 +++---
 qemu-nbd.c   | 5 ++---
 3 files changed, 7 insertions(+), 8 deletions(-)
hw/i386/pc.c +2 -2
index ba7b414..f41c448 100644
@@ -419,8 +419,8 @@ static void pc_cmos_init_late(void *opaque)
 
     if (state.multiple) {
         error_report("warning: multiple floppy disk controllers with "
-                     "iobase=0x3f0 have been found;\n"
-                     "the one being picked for CMOS setup might not reflect "
+                     "iobase=0x3f0 have been found");
+        error_printf("the one being picked for CMOS setup might not reflect "
                      "your intent");
     }
     pc_cmos_init_floppy(s, state.floppy);
kvm-all.c +3 -3
index bd9e764..9148889 100644
@@ -2063,9 +2063,9 @@ void kvm_device_access(int fd, int group, uint64_t attr,
                            write ? KVM_SET_DEVICE_ATTR : KVM_GET_DEVICE_ATTR,
                            &kvmattr);
     if (err < 0) {
-        error_report("KVM_%s_DEVICE_ATTR failed: %s\n"
-                     "Group %d attr 0x%016" PRIx64, write ? "SET" : "GET",
-                     strerror(-err), group, attr);
+        error_report("KVM_%s_DEVICE_ATTR failed: %s",
+                     write ? "SET" : "GET", strerror(-err));
+        error_printf("Group %d attr 0x%016" PRIx64, group, attr);
         abort();
     }
 }
qemu-nbd.c +2 -3
index 023eacd..a4cf847 100644
@@ -599,9 +599,8 @@ int main(int argc, char **argv)
     }
 
     if ((argc - optind) != 1) {
-        error_report("Invalid number of argument.\n"
-                     "Try `%s --help' for more information.",
-                     argv[0]);
+        error_report("Invalid number of arguments");
+        error_printf("Try `%s --help' for more information.\n", argv[0]);
         exit(EXIT_FAILURE);
     }
 
Signature · 1 line
2.4.3
#27 lore raw

PATCH v3 22/24 hw/s390x: Rename local variables Error *l_err to just err

In reply to Markus Armbruster

Let's follow established naming practice here as well.

---
 hw/s390x/ipl.c  | 12 ++++++------
 hw/s390x/sclp.c | 14 +++++++-------
 2 files changed, 13 insertions(+), 13 deletions(-)
hw/s390x/ipl.c +6 -6
index e100428..9c01be5 100644
@@ -76,7 +76,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
     S390IPLState *ipl = S390_IPL(dev);
     uint64_t pentry = KERN_IMAGE_START;
     int kernel_size;
-    Error *l_err = NULL;
+    Error *err = NULL;
 
     int bios_size;
     char *bios_filename;
@@ -94,7 +94,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
 
         bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
         if (bios_filename == NULL) {
-            error_setg(&l_err, "could not find stage1 bootloader");
+            error_setg(&err, "could not find stage1 bootloader");
             goto error;
         }
 
@@ -113,7 +113,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
         g_free(bios_filename);
 
         if (bios_size == -1) {
-            error_setg(&l_err, "could not load bootloader '%s'", bios_name);
+            error_setg(&err, "could not load bootloader '%s'", bios_name);
             goto error;
         }
 
@@ -128,7 +128,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
             kernel_size = load_image_targphys(ipl->kernel, 0, ram_size);
         }
         if (kernel_size < 0) {
-            error_setg(&l_err, "could not load kernel '%s'", ipl->kernel);
+            error_setg(&err, "could not load kernel '%s'", ipl->kernel);
             goto error;
         }
         /*
@@ -156,7 +156,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
             initrd_size = load_image_targphys(ipl->initrd, initrd_offset,
                                               ram_size - initrd_offset);
             if (initrd_size == -1) {
-                error_setg(&l_err, "could not load initrd '%s'", ipl->initrd);
+                error_setg(&err, "could not load initrd '%s'", ipl->initrd);
                 goto error;
             }
 
@@ -170,7 +170,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
     }
     qemu_register_reset(qdev_reset_all_fn, dev);
 error:
-    error_propagate(errp, l_err);
+    error_propagate(errp, err);
 }
 
 static Property s390_ipl_properties[] = {
hw/s390x/sclp.c +7 -7
index a061b49..9a117c9 100644
@@ -456,29 +456,29 @@ static void sclp_realize(DeviceState *dev, Error **errp)
 {
     MachineState *machine = MACHINE(qdev_get_machine());
     SCLPDevice *sclp = SCLP(dev);
-    Error *l_err = NULL;
+    Error *err = NULL;
     uint64_t hw_limit;
     int ret;
 
     object_property_set_bool(OBJECT(sclp->event_facility), true, "realized",
-                             &l_err);
-    if (l_err) {
+                             &err);
+    if (err) {
         goto error;
     }
 
     ret = s390_set_memory_limit(machine->maxram_size, &hw_limit);
     if (ret == -E2BIG) {
-        error_setg(&l_err, "qemu: host supports a maximum of %" PRIu64 " GB",
+        error_setg(&err, "qemu: host supports a maximum of %" PRIu64 " GB",
                    hw_limit >> 30);
         goto error;
     } else if (ret) {
-        error_setg(&l_err, "qemu: setting the guest size failed");
+        error_setg(&err, "qemu: setting the guest size failed");
         goto error;
     }
     return;
 error:
-    assert(l_err);
-    error_propagate(errp, l_err);
+    assert(err);
+    error_propagate(errp, err);
 }
 
 static void sclp_memory_init(SCLPDevice *sclp)
Signature · 1 line
2.4.3
#28 lore raw

PATCH v3 23/24 s390/sclp: Simplify control flow in sclp_realize()

In reply to Markus Armbruster
---
 hw/s390x/sclp.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
hw/s390x/sclp.c +3 -6
index 9a117c9..74f2b40 100644
@@ -463,21 +463,18 @@ static void sclp_realize(DeviceState *dev, Error **errp)
     object_property_set_bool(OBJECT(sclp->event_facility), true, "realized",
                              &err);
     if (err) {
-        goto error;
+        goto out;
     }
 
     ret = s390_set_memory_limit(machine->maxram_size, &hw_limit);
     if (ret == -E2BIG) {
         error_setg(&err, "qemu: host supports a maximum of %" PRIu64 " GB",
                    hw_limit >> 30);
-        goto error;
     } else if (ret) {
         error_setg(&err, "qemu: setting the guest size failed");
-        goto error;
     }
-    return;
-error:
-    assert(err);
+
+out:
     error_propagate(errp, err);
 }
 
Signature · 1 line
2.4.3
#29 lore raw

PATCH v3 24/24 error: Consistently name Error * objects err, and not errp

In reply to Markus Armbruster
---
 contrib/ivshmem-server/main.c      |  8 ++++----
 hmp.c                              | 32 ++++++++++++++++----------------
 hw/core/nmi.c                      | 10 +++++-----
 include/qemu/sockets.h             |  2 +-
 tests/test-string-output-visitor.c |  6 +++---
 5 files changed, 29 insertions(+), 29 deletions(-)
contrib/ivshmem-server/main.c +4 -4
index 00508b5..9b0d6e2 100644
@@ -65,7 +65,7 @@ ivshmem_server_parse_args(IvshmemServerArgs *args, int argc, char *argv[])
 {
     int c;
     unsigned long long v;
-    Error *errp = NULL;
+    Error *err = NULL;
 
     while ((c = getopt(argc, argv,
                        "h"  /* help */
@@ -104,9 +104,9 @@ ivshmem_server_parse_args(IvshmemServerArgs *args, int argc, char *argv[])
             break;
 
         case 'l': /* shm_size */
-            parse_option_size("shm_size", optarg, &args->shm_size, &errp);
-            if (errp) {
-                error_report_err(errp);
+            parse_option_size("shm_size", optarg, &args->shm_size, &err);
+            if (err) {
+                error_report_err(err);
                 ivshmem_server_usage(argv[0], 1);
             }
             break;
hmp.c +16 -16
index 9723397..54f2620 100644
@@ -2078,11 +2078,11 @@ void hmp_rocker(Monitor *mon, const QDict *qdict)
 {
     const char *name = qdict_get_str(qdict, "name");
     RockerSwitch *rocker;
-    Error *errp = NULL;
+    Error *err = NULL;
 
-    rocker = qmp_query_rocker(name, &errp);
-    if (errp != NULL) {
-        hmp_handle_error(mon, &errp);
+    rocker = qmp_query_rocker(name, &err);
+    if (err != NULL) {
+        hmp_handle_error(mon, &err);
         return;
     }
 
@@ -2097,11 +2097,11 @@ void hmp_rocker_ports(Monitor *mon, const QDict *qdict)
 {
     RockerPortList *list, *port;
     const char *name = qdict_get_str(qdict, "name");
-    Error *errp = NULL;
+    Error *err = NULL;
 
-    list = qmp_query_rocker_ports(name, &errp);
-    if (errp != NULL) {
-        hmp_handle_error(mon, &errp);
+    list = qmp_query_rocker_ports(name, &err);
+    if (err != NULL) {
+        hmp_handle_error(mon, &err);
         return;
     }
 
@@ -2126,11 +2126,11 @@ void hmp_rocker_of_dpa_flows(Monitor *mon, const QDict *qdict)
     RockerOfDpaFlowList *list, *info;
     const char *name = qdict_get_str(qdict, "name");
     uint32_t tbl_id = qdict_get_try_int(qdict, "tbl_id", -1);
-    Error *errp = NULL;
+    Error *err = NULL;
 
-    list = qmp_query_rocker_of_dpa_flows(name, tbl_id != -1, tbl_id, &errp);
-    if (errp != NULL) {
-        hmp_handle_error(mon, &errp);
+    list = qmp_query_rocker_of_dpa_flows(name, tbl_id != -1, tbl_id, &err);
+    if (err != NULL) {
+        hmp_handle_error(mon, &err);
         return;
     }
 
@@ -2276,12 +2276,12 @@ void hmp_rocker_of_dpa_groups(Monitor *mon, const QDict *qdict)
     RockerOfDpaGroupList *list, *g;
     const char *name = qdict_get_str(qdict, "name");
     uint8_t type = qdict_get_try_int(qdict, "type", 9);
-    Error *errp = NULL;
+    Error *err = NULL;
     bool set = false;
 
-    list = qmp_query_rocker_of_dpa_groups(name, type != 9, type, &errp);
-    if (errp != NULL) {
-        hmp_handle_error(mon, &errp);
+    list = qmp_query_rocker_of_dpa_groups(name, type != 9, type, &err);
+    if (err != NULL) {
+        hmp_handle_error(mon, &err);
         return;
     }
 
hw/core/nmi.c +5 -5
index de1d1f8..4057cdd 100644
@@ -25,7 +25,7 @@
 
 struct do_nmi_s {
     int cpu_index;
-    Error *errp;
+    Error *err;
     bool handled;
 };
 
@@ -40,8 +40,8 @@ static int do_nmi(Object *o, void *opaque)
         NMIClass *nc = NMI_GET_CLASS(n);
 
         ns->handled = true;
-        nc->nmi_monitor_handler(n, ns->cpu_index, &ns->errp);
-        if (ns->errp) {
+        nc->nmi_monitor_handler(n, ns->cpu_index, &ns->err);
+        if (ns->err) {
             return -1;
         }
     }
@@ -59,13 +59,13 @@ void nmi_monitor_handle(int cpu_index, Error **errp)
 {
     struct do_nmi_s ns = {
         .cpu_index = cpu_index,
-        .errp = NULL,
+        .err = NULL,
         .handled = false
     };
 
     nmi_children(object_get_root(), &ns);
     if (ns.handled) {
-        error_propagate(errp, ns.errp);
+        error_propagate(errp, ns.err);
     } else {
         error_setg(errp, QERR_UNSUPPORTED);
     }
include/qemu/sockets.h +1 -1
index 5a183c5..21b0b6f 100644
@@ -53,7 +53,7 @@ int recv_all(int fd, void *buf, int len1, bool single_read);
 /* callback function for nonblocking connect
  * valid fd on success, negative error code on failure
  */
-typedef void NonBlockingConnectHandler(int fd, Error *errp, void *opaque);
+typedef void NonBlockingConnectHandler(int fd, Error *err, void *opaque);
 
 InetSocketAddress *inet_parse(const char *str, Error **errp);
 int inet_listen_opts(QemuOpts *opts, int port_offset, Error **errp);
tests/test-string-output-visitor.c +3 -3
index 9585252..7aecdfc 100644
@@ -81,7 +81,7 @@ static void test_visitor_out_intList(TestOutputVisitorData *data,
         3, 4, 5, 6, 11, 12, 13, 21, 22, INT64_MAX - 1, INT64_MAX};
     intList *list = NULL, **tmp = &list;
     int i;
-    Error *errp = NULL;
+    Error *err = NULL;
     char *str;
 
     for (i = 0; i < sizeof(value) / sizeof(value[0]); i++) {
@@ -90,8 +90,8 @@ static void test_visitor_out_intList(TestOutputVisitorData *data,
         tmp = &(*tmp)->next;
     }
 
-    visit_type_intList(data->ov, &list, NULL, &errp);
-    g_assert(errp == NULL);
+    visit_type_intList(data->ov, &list, NULL, &err);
+    g_assert(err == NULL);
 
     str = string_output_get_string(data->sov);
     g_assert(str != NULL);
Signature · 1 line
2.4.3
Reviewed-by on v3 24/24
#30 lore raw

Re: [Qemu-devel] [PATCH v3 24/24] error: Consistently name Error * objects err, and not errp

Quoted 9 lines · Markus Armbruster
---
 contrib/ivshmem-server/main.c      |  8 ++++----
 hmp.c                              | 32 ++++++++++++++++----------------
 hw/core/nmi.c                      | 10 +++++-----
 include/qemu/sockets.h             |  2 +-
 tests/test-string-output-visitor.c |  6 +++---
 5 files changed, 29 insertions(+), 29 deletions(-)
Signature · 2 lines
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org