Skip to contentSkip to conversation

phy: use syscon framework APIs to set ctrl mod reg

PATCH In review Kishon Vijay Abraham I 2 participants 11 messages Dec 21, 2015 – Dec 29, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v4 cover phy: use syscon framework APIs to set ctrl mod reg

phy-omap-control driver was added when there was no proper infrastructure for doing control module initializations. The phy-omap-control driver is not an 'actual' PHY driver and it was just a hack to do PHY related control module initializations. phy-omap-control is also getting unmanageable with the number of platforms each having number of modules (like USB, SATA, PCIe), using the same driver for control module initializations.

Now with SYSCON framework being added to the kernel, phy-omap-control shouldn't be needed and it also provides a uniform API across all the modules to program the control module.

This series is basically to deprecate using phy-omap-control and use syscon APIs to program the control module registers.

Changes from v3:
*) Added description of why syscon is better in cover letter *) refactored some driver code so that it's easy to remove obsolete
code when phy-omap-control driver is removed.

Changes from v2:
No changes.

Changes from v1:
*) cleanup ti_pipe3_probe in multiple steps
*) other minor cleanups

Changes from [1] in PHY patches include
*) cleanup ti_pipe3_probe
*) have mask, power_on and power_off values in usb_phy_data for
omap-usb2 phy

The patches have been pushed to
git://git.ti.com/linux-phy/linux-phy.git syscon_v4

[1] -> https://lkml.org/lkml/2015/6/23/189

All the testing was done both before applying the dt patches and after applying the dt patches.

Kishon Vijay Abraham I (9):
phy: ti-pipe3: introduce local struct device* in probe
phy: ti-pipe3: move clk initialization to a separate function
phy: ti-pipe3: move sysctrl initialization to a separate function
phy: ti-pipe3: move mem resource initialization to a separate
function
phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during
probe
phy: ti-pipe3: use *syscon* framework API to power on/off the PHY
phy: ti-pipe3: use *syscon* framework API to set PCS value of the PHY
phy: omap-usb2: use omap_usb_power_off to power off the PHY during
probe
phy: omap-usb2: use *syscon* framework API to power on/off the PHY

 Documentation/devicetree/bindings/phy/ti-phy.txt |   20 +-
 drivers/phy/phy-omap-usb2.c                      |   94 +++++--
 drivers/phy/phy-ti-pipe3.c                       |  302 ++++++++++++++++------
 include/linux/phy/omap_usb.h                     |   23 ++
 4 files changed, 333 insertions(+), 106 deletions(-)
Signature · 6 lines
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#1 lore raw

PATCH v4 1/9 phy: ti-pipe3: introduce local struct device* in probe

No functional change. Introduce local struct device pointer in probe and replace using &pdev->dev/phy->dev with the local device pointer. This is in preparation to split ti_pipe3_probe and add separate functions for getting mem resource, getting sysctrl and getting clocks.

---
 drivers/phy/phy-ti-pipe3.c |   54 ++++++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 27 deletions(-)
drivers/phy/phy-ti-pipe3.c +27 -27
index 93bc112..c511105 100644
@@ -319,40 +319,41 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	struct platform_device *control_pdev;
 	const struct of_device_id *match;
 	struct clk *clk;
+	struct device *dev = &pdev->dev;
 
-	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
 		return -ENOMEM;
 
-	phy->dev		= &pdev->dev;
+	phy->dev		= dev;
 
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-		match = of_match_device(ti_pipe3_id_table, &pdev->dev);
+		match = of_match_device(ti_pipe3_id_table, dev);
 		if (!match)
 			return -EINVAL;
 
 		phy->dpll_map = (struct pipe3_dpll_map *)match->data;
 		if (!phy->dpll_map) {
-			dev_err(&pdev->dev, "no DPLL data\n");
+			dev_err(dev, "no DPLL data\n");
 			return -EINVAL;
 		}
 
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 						   "pll_ctrl");
-		phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+		phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
 		if (IS_ERR(phy->pll_ctrl_base))
 			return PTR_ERR(phy->pll_ctrl_base);
 
-		phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
+		phy->sys_clk = devm_clk_get(dev, "sysclk");
 		if (IS_ERR(phy->sys_clk)) {
-			dev_err(&pdev->dev, "unable to get sysclk\n");
+			dev_err(dev, "unable to get sysclk\n");
 			return -EINVAL;
 		}
 	}
 
-	phy->refclk = devm_clk_get(phy->dev, "refclk");
+	phy->refclk = devm_clk_get(dev, "refclk");
 	if (IS_ERR(phy->refclk)) {
-		dev_err(&pdev->dev, "unable to get refclk\n");
+		dev_err(dev, "unable to get refclk\n");
 		/* older DTBs have missing refclk in SATA PHY
 		 * so don't bail out in case of SATA PHY.
 		 */
@@ -361,9 +362,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	}
 
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
-		phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+		phy->wkupclk = devm_clk_get(dev, "wkupclk");
 		if (IS_ERR(phy->wkupclk)) {
-			dev_err(&pdev->dev, "unable to get wkupclk\n");
+			dev_err(dev, "unable to get wkupclk\n");
 			return PTR_ERR(phy->wkupclk);
 		}
 	} else {
@@ -371,14 +372,14 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
 							"syscon-pllreset");
 		if (IS_ERR(phy->dpll_reset_syscon)) {
-			dev_info(&pdev->dev,
+			dev_info(dev,
 				 "can't get syscon-pllreset, sata dpll won't idle\n");
 			phy->dpll_reset_syscon = NULL;
 		} else {
 			if (of_property_read_u32_index(node,
 						       "syscon-pllreset", 1,
 						       &phy->dpll_reset_reg)) {
-				dev_err(&pdev->dev,
+				dev_err(dev,
 					"couldn't get pllreset reg. offset\n");
 				return -EINVAL;
 			}
@@ -387,30 +388,30 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 
 	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
 
-		clk = devm_clk_get(phy->dev, "dpll_ref");
+		clk = devm_clk_get(dev, "dpll_ref");
 		if (IS_ERR(clk)) {
-			dev_err(&pdev->dev, "unable to get dpll ref clk\n");
+			dev_err(dev, "unable to get dpll ref clk\n");
 			return PTR_ERR(clk);
 		}
 		clk_set_rate(clk, 1500000000);
 
-		clk = devm_clk_get(phy->dev, "dpll_ref_m2");
+		clk = devm_clk_get(dev, "dpll_ref_m2");
 		if (IS_ERR(clk)) {
-			dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
+			dev_err(dev, "unable to get dpll ref m2 clk\n");
 			return PTR_ERR(clk);
 		}
 		clk_set_rate(clk, 100000000);
 
-		clk = devm_clk_get(phy->dev, "phy-div");
+		clk = devm_clk_get(dev, "phy-div");
 		if (IS_ERR(clk)) {
-			dev_err(&pdev->dev, "unable to get phy-div clk\n");
+			dev_err(dev, "unable to get phy-div clk\n");
 			return PTR_ERR(clk);
 		}
 		clk_set_rate(clk, 100000000);
 
-		phy->div_clk = devm_clk_get(phy->dev, "div-clk");
+		phy->div_clk = devm_clk_get(dev, "div-clk");
 		if (IS_ERR(phy->div_clk)) {
-			dev_err(&pdev->dev, "unable to get div-clk\n");
+			dev_err(dev, "unable to get div-clk\n");
 			return PTR_ERR(phy->div_clk);
 		}
 	} else {
@@ -419,13 +420,13 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 
 	control_node = of_parse_phandle(node, "ctrl-module", 0);
 	if (!control_node) {
-		dev_err(&pdev->dev, "Failed to get control device phandle\n");
+		dev_err(dev, "Failed to get control device phandle\n");
 		return -EINVAL;
 	}
 
 	control_pdev = of_find_device_by_node(control_node);
 	if (!control_pdev) {
-		dev_err(&pdev->dev, "Failed to get control device\n");
+		dev_err(dev, "Failed to get control device\n");
 		return -EINVAL;
 	}
 
@@ -434,7 +435,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	omap_control_phy_power(phy->control_dev, 0);
 
 	platform_set_drvdata(pdev, phy);
-	pm_runtime_enable(phy->dev);
+	pm_runtime_enable(dev);
 
 	/*
 	 * Prevent auto-disable of refclk for SATA PHY due to Errata i783
@@ -446,13 +447,12 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		}
 	}
 
-	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+	generic_phy = devm_phy_create(dev, NULL, &ops);
 	if (IS_ERR(generic_phy))
 		return PTR_ERR(generic_phy);
 
 	phy_set_drvdata(generic_phy, phy);
-	phy_provider = devm_of_phy_provider_register(phy->dev,
-			of_phy_simple_xlate);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (IS_ERR(phy_provider))
 		return PTR_ERR(phy_provider);
 
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH v4 2/9 phy: ti-pipe3: move clk initialization to a separate function

In reply to Kishon Vijay Abraham I

No functional change. Moved clock initialization done in probe to a separate function as part of cleaning up ti_pipe3_probe.

---
 drivers/phy/phy-ti-pipe3.c |  127 +++++++++++++++++++++++++-------------------
 1 file changed, 72 insertions(+), 55 deletions(-)
drivers/phy/phy-ti-pipe3.c +72 -55
index c511105..3379a4d 100644
@@ -308,48 +308,11 @@ static const struct phy_ops ops = {
 
 static const struct of_device_id ti_pipe3_id_table[];
 
-static int ti_pipe3_probe(struct platform_device *pdev)
+static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 {
-	struct ti_pipe3 *phy;
-	struct phy *generic_phy;
-	struct phy_provider *phy_provider;
-	struct resource *res;
-	struct device_node *node = pdev->dev.of_node;
-	struct device_node *control_node;
-	struct platform_device *control_pdev;
-	const struct of_device_id *match;
 	struct clk *clk;
-	struct device *dev = &pdev->dev;
-
-	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
-	if (!phy)
-		return -ENOMEM;
-
-	phy->dev		= dev;
-
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-		match = of_match_device(ti_pipe3_id_table, dev);
-		if (!match)
-			return -EINVAL;
-
-		phy->dpll_map = (struct pipe3_dpll_map *)match->data;
-		if (!phy->dpll_map) {
-			dev_err(dev, "no DPLL data\n");
-			return -EINVAL;
-		}
-
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-						   "pll_ctrl");
-		phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
-		if (IS_ERR(phy->pll_ctrl_base))
-			return PTR_ERR(phy->pll_ctrl_base);
-
-		phy->sys_clk = devm_clk_get(dev, "sysclk");
-		if (IS_ERR(phy->sys_clk)) {
-			dev_err(dev, "unable to get sysclk\n");
-			return -EINVAL;
-		}
-	}
+	struct device *dev = phy->dev;
+	struct device_node *node = dev->of_node;
 
 	phy->refclk = devm_clk_get(dev, "refclk");
 	if (IS_ERR(phy->refclk)) {
@@ -369,25 +332,17 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		}
 	} else {
 		phy->wkupclk = ERR_PTR(-ENODEV);
-		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
-							"syscon-pllreset");
-		if (IS_ERR(phy->dpll_reset_syscon)) {
-			dev_info(dev,
-				 "can't get syscon-pllreset, sata dpll won't idle\n");
-			phy->dpll_reset_syscon = NULL;
-		} else {
-			if (of_property_read_u32_index(node,
-						       "syscon-pllreset", 1,
-						       &phy->dpll_reset_reg)) {
-				dev_err(dev,
-					"couldn't get pllreset reg. offset\n");
-				return -EINVAL;
-			}
+	}
+
+	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+		phy->sys_clk = devm_clk_get(dev, "sysclk");
+		if (IS_ERR(phy->sys_clk)) {
+			dev_err(dev, "unable to get sysclk\n");
+			return -EINVAL;
 		}
 	}
 
 	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-
 		clk = devm_clk_get(dev, "dpll_ref");
 		if (IS_ERR(clk)) {
 			dev_err(dev, "unable to get dpll ref clk\n");
@@ -418,6 +373,68 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		phy->div_clk = ERR_PTR(-ENODEV);
 	}
 
+	return 0;
+}
+
+static int ti_pipe3_probe(struct platform_device *pdev)
+{
+	struct ti_pipe3 *phy;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *control_node;
+	struct platform_device *control_pdev;
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->dev		= dev;
+
+	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+		match = of_match_device(ti_pipe3_id_table, dev);
+		if (!match)
+			return -EINVAL;
+
+		phy->dpll_map = (struct pipe3_dpll_map *)match->data;
+		if (!phy->dpll_map) {
+			dev_err(dev, "no DPLL data\n");
+			return -EINVAL;
+		}
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   "pll_ctrl");
+		phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(phy->pll_ctrl_base))
+			return PTR_ERR(phy->pll_ctrl_base);
+	}
+
+	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+							"syscon-pllreset");
+		if (IS_ERR(phy->dpll_reset_syscon)) {
+			dev_info(dev,
+				 "can't get syscon-pllreset, sata dpll won't idle\n");
+			phy->dpll_reset_syscon = NULL;
+		} else {
+			if (of_property_read_u32_index(node,
+						       "syscon-pllreset", 1,
+						       &phy->dpll_reset_reg)) {
+				dev_err(dev,
+					"couldn't get pllreset reg. offset\n");
+				return -EINVAL;
+			}
+		}
+	}
+
+	ret = ti_pipe3_get_clk(phy);
+	if (ret)
+		return ret;
+
 	control_node = of_parse_phandle(node, "ctrl-module", 0);
 	if (!control_node) {
 		dev_err(dev, "Failed to get control device phandle\n");
Signature · 1 line
1.7.9.5
#3 lore raw

PATCH v4 3/9 phy: ti-pipe3: move sysctrl initialization to a separate function

In reply to Kishon Vijay Abraham I

No functional change. Moved sysctrl initialization done in probe to a separate function as part of cleaning up ti_pipe3_probe.

---
 drivers/phy/phy-ti-pipe3.c |   78 +++++++++++++++++++++++++-------------------
 1 file changed, 45 insertions(+), 33 deletions(-)
drivers/phy/phy-ti-pipe3.c +45 -33
index 3379a4d..3154da0 100644
@@ -376,6 +376,48 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 	return 0;
 }
 
+static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
+{
+	struct device *dev = phy->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *control_node;
+	struct platform_device *control_pdev;
+
+	control_node = of_parse_phandle(node, "ctrl-module", 0);
+	if (!control_node) {
+		dev_err(dev, "Failed to get control device phandle\n");
+		return -EINVAL;
+	}
+
+	control_pdev = of_find_device_by_node(control_node);
+	if (!control_pdev) {
+		dev_err(dev, "Failed to get control device\n");
+		return -EINVAL;
+	}
+
+	phy->control_dev = &control_pdev->dev;
+
+	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+							"syscon-pllreset");
+		if (IS_ERR(phy->dpll_reset_syscon)) {
+			dev_info(dev,
+				 "can't get syscon-pllreset, sata dpll won't idle\n");
+			phy->dpll_reset_syscon = NULL;
+		} else {
+			if (of_property_read_u32_index(node,
+						       "syscon-pllreset", 1,
+						       &phy->dpll_reset_reg)) {
+				dev_err(dev,
+					"couldn't get pllreset reg. offset\n");
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+}
+
 static int ti_pipe3_probe(struct platform_device *pdev)
 {
 	struct ti_pipe3 *phy;
@@ -383,8 +425,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct resource *res;
 	struct device_node *node = pdev->dev.of_node;
-	struct device_node *control_node;
-	struct platform_device *control_pdev;
 	const struct of_device_id *match;
 	struct device *dev = &pdev->dev;
 	int ret;
@@ -413,42 +453,14 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 			return PTR_ERR(phy->pll_ctrl_base);
 	}
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
-		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
-							"syscon-pllreset");
-		if (IS_ERR(phy->dpll_reset_syscon)) {
-			dev_info(dev,
-				 "can't get syscon-pllreset, sata dpll won't idle\n");
-			phy->dpll_reset_syscon = NULL;
-		} else {
-			if (of_property_read_u32_index(node,
-						       "syscon-pllreset", 1,
-						       &phy->dpll_reset_reg)) {
-				dev_err(dev,
-					"couldn't get pllreset reg. offset\n");
-				return -EINVAL;
-			}
-		}
-	}
+	ret = ti_pipe3_get_sysctrl(phy);
+	if (ret)
+		return ret;
 
 	ret = ti_pipe3_get_clk(phy);
 	if (ret)
 		return ret;
 
-	control_node = of_parse_phandle(node, "ctrl-module", 0);
-	if (!control_node) {
-		dev_err(dev, "Failed to get control device phandle\n");
-		return -EINVAL;
-	}
-
-	control_pdev = of_find_device_by_node(control_node);
-	if (!control_pdev) {
-		dev_err(dev, "Failed to get control device\n");
-		return -EINVAL;
-	}
-
-	phy->control_dev = &control_pdev->dev;
-
 	omap_control_phy_power(phy->control_dev, 0);
 
 	platform_set_drvdata(pdev, phy);
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH v4 4/9 phy: ti-pipe3: move mem resource initialization to a separate function

In reply to Kishon Vijay Abraham I

No functional change. Moved mem resource initialization done in probe to a separate function as part of cleaning up ti_pipe3_probe.

---
 drivers/phy/phy-ti-pipe3.c |   52 ++++++++++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 19 deletions(-)
drivers/phy/phy-ti-pipe3.c +33 -19
index 3154da0..1991efd 100644
@@ -418,14 +418,42 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 	return 0;
 }
 
+static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
+{
+	struct resource *res;
+	const struct of_device_id *match;
+	struct device *dev = phy->dev;
+	struct device_node *node = dev->of_node;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
+		return 0;
+
+	match = of_match_device(ti_pipe3_id_table, dev);
+	if (!match)
+		return -EINVAL;
+
+	phy->dpll_map = (struct pipe3_dpll_map *)match->data;
+	if (!phy->dpll_map) {
+		dev_err(dev, "no DPLL data\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "pll_ctrl");
+	phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->pll_ctrl_base))
+		return PTR_ERR(phy->pll_ctrl_base);
+
+	return 0;
+}
+
 static int ti_pipe3_probe(struct platform_device *pdev)
 {
 	struct ti_pipe3 *phy;
 	struct phy *generic_phy;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	struct device_node *node = pdev->dev.of_node;
-	const struct of_device_id *match;
 	struct device *dev = &pdev->dev;
 	int ret;
 
@@ -435,23 +463,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 
 	phy->dev		= dev;
 
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-		match = of_match_device(ti_pipe3_id_table, dev);
-		if (!match)
-			return -EINVAL;
-
-		phy->dpll_map = (struct pipe3_dpll_map *)match->data;
-		if (!phy->dpll_map) {
-			dev_err(dev, "no DPLL data\n");
-			return -EINVAL;
-		}
-
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-						   "pll_ctrl");
-		phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
-		if (IS_ERR(phy->pll_ctrl_base))
-			return PTR_ERR(phy->pll_ctrl_base);
-	}
+	ret = ti_pipe3_get_pll_base(phy);
+	if (ret)
+		return ret;
 
 	ret = ti_pipe3_get_sysctrl(phy);
 	if (ret)
Signature · 1 line
1.7.9.5
#5 lore raw

PATCH v4 5/9 phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe

In reply to Kishon Vijay Abraham I

No functional change. Previously omap_control_phy_power() was used to power off the PHY during probe. But once PIPE3 driver is adapted to use syscon, omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off to power off the PHY.

---
 drivers/phy/phy-ti-pipe3.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/phy/phy-ti-pipe3.c +3 -2
index 1991efd..0ce4194 100644
@@ -475,8 +475,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	omap_control_phy_power(phy->control_dev, 0);
-
 	platform_set_drvdata(pdev, phy);
 	pm_runtime_enable(dev);
 
@@ -495,6 +493,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		return PTR_ERR(generic_phy);
 
 	phy_set_drvdata(generic_phy, phy);
+
+	ti_pipe3_power_off(generic_phy);
+
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (IS_ERR(phy_provider))
 		return PTR_ERR(phy_provider);
Signature · 1 line
1.7.9.5
#6 lore raw

PATCH v4 6/9 phy: ti-pipe3: use *syscon* framework API to power on/off the PHY

In reply to Kishon Vijay Abraham I

Deprecate using phy-omap-control driver to power on/off the PHY and use *syscon* framework to do the same.

---
 Documentation/devicetree/bindings/phy/ti-phy.txt |   10 ++-
 drivers/phy/phy-ti-pipe3.c                       |   88 ++++++++++++++++++----
 2 files changed, 81 insertions(+), 17 deletions(-)
Documentation/devicetree/bindings/phy/ti-phy.txt +8 -2
index 9cf9446..e06f980 100644
@@ -77,8 +77,6 @@ Required properties:
    * "div-clk" - apll clock
 
 Optional properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
  - id: If there are multiple instance of the same type, in order to
    differentiate between each instance "id" can be used (e.g., multi-lane PCIe
    PHY). If "id" is not provided, it is set to default value of '1'.
@@ -86,6 +84,14 @@ Optional properties:
    CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
    register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
 
+Deprecated properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+
+Recommended properies:
+ - syscon-phy-power : phandle/offset pair. Phandle to the system control
+   module and the register offset to power on/off the PHY.
+
 This is usually a subnode of ocp2scp to which it is connected.
 
 usb3phy@4a084400 {
drivers/phy/phy-ti-pipe3.c +73 -15

133 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#7 lore raw

PATCH v4 7/9 phy: ti-pipe3: use *syscon* framework API to set PCS value of the PHY

In reply to Kishon Vijay Abraham I

Deprecate using phy-omap-control driver to set PCS value of the PHY and start using *syscon* API to do the same.

---
 Documentation/devicetree/bindings/phy/ti-phy.txt |    2 ++
 drivers/phy/phy-ti-pipe3.c                       |   34 ++++++++++++++++++++--
 2 files changed, 34 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/ti-phy.txt +2 -0
index e06f980..49e5b0c 100644
@@ -83,6 +83,8 @@ Optional properties:
  - syscon-pllreset: Handle to system control region that contains the
    CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
    register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
+ - syscon-pcs : phandle/offset pair. Phandle to the system control module and the
+   register offset to write the PCS delay value.
 
 Deprecated properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
drivers/phy/phy-ti-pipe3.c +32 -2
index a47b190..0a477d2 100644
@@ -65,6 +65,9 @@
 #define PIPE3_PHY_TX_RX_POWERON		0x3
 #define PIPE3_PHY_TX_RX_POWEROFF	0x0
 
+#define PCIE_PCS_MASK			0xFF0000
+#define PCIE_PCS_DELAY_COUNT_SHIFT	0x10
+
 /*
  * This is an Empirical value that works, need to confirm the actual
  * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
@@ -96,9 +99,11 @@ struct ti_pipe3 {
 	struct clk		*div_clk;
 	struct pipe3_dpll_map	*dpll_map;
 	struct regmap		*phy_power_syscon; /* ctrl. reg. acces */
+	struct regmap		*pcs_syscon; /* ctrl. reg. acces */
 	struct regmap		*dpll_reset_syscon; /* ctrl. reg. acces */
 	unsigned int		dpll_reset_reg; /* reg. index within syscon */
 	unsigned int		power_reg; /* power reg. index within syscon */
+	unsigned int		pcie_pcs_reg; /* pcs reg. index in syscon */
 	bool			sata_refclk_enabled;
 };
 
@@ -269,8 +274,15 @@ static int ti_pipe3_init(struct phy *x)
 	 * 18-1804.
 	 */
 	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
-		omap_control_pcie_pcs(phy->control_dev, 0x96);
-		return 0;
+		if (!phy->pcs_syscon) {
+			omap_control_pcie_pcs(phy->control_dev, 0x96);
+			return 0;
+		}
+
+		val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
+		ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
+					 PCIE_PCS_MASK, val);
+		return ret;
 	}
 
 	/* Bring it out of IDLE if it is IDLE */
@@ -455,6 +467,24 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 		phy->control_dev = &control_pdev->dev;
 	}
 
+	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+		phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
+								  "syscon-pcs");
+		if (IS_ERR(phy->pcs_syscon)) {
+			dev_dbg(dev,
+				"can't get syscon-pcs, using omap control\n");
+			phy->pcs_syscon = NULL;
+		} else {
+			if (of_property_read_u32_index(node,
+						       "syscon-pcs", 1,
+						       &phy->pcie_pcs_reg)) {
+				dev_err(dev,
+					"couldn't get pcie pcs reg. offset\n");
+				return -EINVAL;
+			}
+		}
+	}
+
 	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
 		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
 							"syscon-pllreset");
Signature · 1 line
1.7.9.5
#8 lore raw

PATCH v4 8/9 phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe

In reply to Kishon Vijay Abraham I

No functional change. Previously omap_control_phy_power() was used to power off the PHY during probe. But once phy-omap-usb2 driver is adapted to use syscon, omap_control_phy_power() cannot be used. Hence used omap_usb_power_off to power off the PHY.

---
 drivers/phy/phy-omap-usb2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/phy-omap-usb2.c +1 -1
index 0fe8058..c79633e 100644
@@ -241,7 +241,6 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	}
 
 	phy->control_dev = &control_pdev->dev;
-	omap_control_phy_power(phy->control_dev, 0);
 
 	otg->set_host		= omap_usb_set_host;
 	otg->set_peripheral	= omap_usb_set_peripheral;
@@ -261,6 +260,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	}
 
 	phy_set_drvdata(generic_phy, phy);
+	omap_usb_power_off(generic_phy);
 
 	phy_provider = devm_of_phy_provider_register(phy->dev,
 			of_phy_simple_xlate);
Signature · 1 line
1.7.9.5
#9 lore raw

PATCH v4 9/9 phy: omap-usb2: use *syscon* framework API to power on/off the PHY

In reply to Kishon Vijay Abraham I

Deprecate using phy-omap-control driver to power on/off the PHY, and use *syscon* framework to do the same. This handles powering on/off the PHY for the USB2 PHYs used in various TI SoCs.

---
 Documentation/devicetree/bindings/phy/ti-phy.txt |    8 +-
 drivers/phy/phy-omap-usb2.c                      |   92 ++++++++++++++++++----
 include/linux/phy/omap_usb.h                     |   23 ++++++
 3 files changed, 105 insertions(+), 18 deletions(-)
Documentation/devicetree/bindings/phy/ti-phy.txt +7 -1
index 49e5b0c..a3b3945 100644
@@ -31,6 +31,8 @@ OMAP USB2 PHY
 
 Required properties:
  - compatible: Should be "ti,omap-usb2"
+	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
+	       in DRA7x
  - reg : Address and length of the register set for the device.
  - #phy-cells: determine the number of cells that should be given in the
    phandle while referencing this phy.
@@ -40,10 +42,14 @@ Required properties:
    * "wkupclk" - wakeup clock.
    * "refclk" - reference clock (optional).
 
-Optional properties:
+Deprecated properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
    the PHY.
 
+Recommended properies:
+- syscon-phy-power : phandle/offset pair. Phandle to the system control
+  module and the register offset to power on/off the PHY.
+
 This is usually a subnode of ocp2scp to which it is connected.
 
 usb2phy@4a0ad080 {
drivers/phy/phy-omap-usb2.c +75 -17

156 lines not on this page · raw message

include/linux/phy/omap_usb.h +23 -0
index dc2c541..2e5fb87 100644
@@ -30,6 +30,12 @@ struct usb_dpll_params {
 	u32	mf;
 };
 
+enum omap_usb_phy_type {
+	TYPE_USB2,    /* USB2_PHY, power down in CONTROL_DEV_CONF */
+	TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+	TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
+};
+
 struct omap_usb {
 	struct usb_phy		phy;
 	struct phy_companion	*comparator;
@@ -40,11 +46,20 @@ struct omap_usb {
 	struct clk		*wkupclk;
 	struct clk		*optclk;
 	u8			flags;
+	enum omap_usb_phy_type	type;
+	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
+	unsigned int		power_reg; /* power reg. index within syscon */
+	u32			mask;
+	u32			power_on;
+	u32			power_off;
 };
 
 struct usb_phy_data {
 	const char *label;
 	u8 flags;
+	u32 mask;
+	u32 power_on;
+	u32 power_off;
 };
 
 /* Driver Flags */
@@ -52,6 +67,14 @@ struct usb_phy_data {
 #define OMAP_USB2_HAS_SET_VBUS (1 << 1)
 #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2)
 
+#define OMAP_DEV_PHY_PD		BIT(0)
+#define OMAP_USB2_PHY_PD	BIT(28)
+
+#define AM437X_USB2_PHY_PD		BIT(0)
+#define AM437X_USB2_OTG_PD		BIT(1)
+#define AM437X_USB2_OTGVDET_EN		BIT(19)
+#define AM437X_USB2_OTGSESSEND_EN	BIT(20)
+
 #define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
 
 #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
Signature · 1 line
1.7.9.5
maintainer Acked-by on v4 9/9
#10 lore raw

Re: [PATCH v4 9/9] phy: omap-usb2: use *syscon* framework API to power on/off the PHY

Quoted 10 lines · Kishon Vijay Abraham I

Deprecate using phy-omap-control driver to power on/off the PHY, and use *syscon* framework to do the same. This handles powering on/off the PHY for the USB2 PHYs used in various TI SoCs.

---
 Documentation/devicetree/bindings/phy/ti-phy.txt |    8 +-
 drivers/phy/phy-omap-usb2.c                      |   92 ++++++++++++++++++----
 include/linux/phy/omap_usb.h                     |   23 ++++++
 3 files changed, 105 insertions(+), 18 deletions(-)