arm: socfpga: Enable ubi and ubifs support
PATCH v2 1/5 arm: socfpga: Enable ubi and ubifs support
When QSPI and NAND is enabled, the ubi and ubifs support will be enabled too.
---
Changes for v2
- move CONFIG_SPI_FLASH_USE_4K_SECTORS to Kconfig
--- include/configs/socfpga_common.h | 8 ++++++++ 1 file changed, 8 insertions(+)
include/configs/socfpga_common.h +8 -0
@@ -300,6 +300,14 @@ unsigned int cm_get_qspi_controller_clk_hz(void); "- at 1536k(UBI)\0"#endif +/* UBI and UBIFS support */ +#if defined(CONFIG_CMD_SF ) || defined(CONFIG_CMD_NAND ) +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_LZO +#endif +/* * SPL *
Signature · 1 line
1.9.2.468.g3f0c02a
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS for UBI and UBIFS support on serial NOR flash
---
Changes for v2
- move CONFIG_SPI_FLASH_USE_4K_SECTORS to Kconfig
--- configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/socfpga_cyclone5_defconfig +1 -0
@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=n
Signature · 1 line
1.9.2.468.g3f0c02a
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Quoted 21 lines · Chin Liang See
Undefine
CONFIG_SPI_FLASH_USE_4K_SECTORSfor UBI and UBIFS support on serial NOR flashSigned-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig--- configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)(quoted diff) +0
-0b/configs/socfpga_cyclone5_defconfig index 864358c..4216b55 100644
configs/socfpga_cyclone5_defconfig CONFIG_DESIGNWARE_SPI=y · line 26
Quoted 4 lines
configs/socfpga_cyclone5_defconfig +1
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=n
And for arriaV ... ? And sockit ? ;-)
Best regards,
Marek Vasut
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Quoted 17 lines · Marek Vasut
Quoted 16 lines · Chin Liang See
Undefine
CONFIG_SPI_FLASH_USE_4K_SECTORSfor UBI and UBIFS support on serial NOR flashSigned-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig--- configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)
Quoted 11 lines
configs/socfpga_cyclone5_defconfig CONFIG_DESIGNWARE_SPI=y · line 26
Quoted 9 lines
(quoted diff) +0
-0b/configs/socfpga_cyclone5_defconfig index 864358c..4216b55 100644
configs/socfpga_cyclone5_defconfig +1
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=nAnd for arriaV ... ? And sockit ? ;-)
haha too obsess testing on CV board :)
Let me include them into these series.
Thanks
Chin Liang
Quoted 3 lines
Best regards,
Marek Vasut
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Quoted 29 lines · Chin Liang See
Quoted 28 lines · Marek Vasut
Quoted 27 lines · Chin Liang See
Undefine
CONFIG_SPI_FLASH_USE_4K_SECTORSfor UBI and UBIFS support on serial NOR flashSigned-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig
---configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)(quoted diff) +0
-0b/configs/socfpga_cyclone5_defconfig index 864358c..4216b55 100644
configs/socfpga_cyclone5_defconfig +0
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
+CONFIG_SPI_FLASH_USE_4K_SECTORS=n
And for arriaV ... ? And sockit ? ;-)
haha too obsess testing on CV board :)
Let me include them into these series.
These should be the only three boards which use QSPI NOR.
SoCrates, MCV and DE0 do not have QSPI NOR. SR1500 I believe also doesn't have one.
Best regards,
Marek Vasut
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Quoted 36 lines · Marek Vasut
Quoted 35 lines · Chin Liang See
Quoted 33 lines · Marek Vasut
Quoted 23 lines · Chin Liang See
Undefine
CONFIG_SPI_FLASH_USE_4K_SECTORSfor UBI and UBIFS support on serial NOR flashSigned-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig
---configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)(quoted diff) +0
-0b/configs/socfpga_cyclone5_defconfig index 864358c..4216b55 100644
configs/socfpga_cyclone5_defconfig CONFIG_DESIGNWARE_SPI=y · line 26
Quoted 6 lines
configs/socfpga_cyclone5_defconfig +1
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=nAnd for arriaV ... ? And sockit ? ;-)
Quoted 8 lines
Quoted 2 lines
haha too obsess testing on CV board :)
Let me include them into these series.These should be the only three boards which use QSPI NOR.
SoCrates, MCV and DE0 do not have QSPI NOR. SR1500 I believe also doesn't have
one.
Nice, dun need to scratch my head :)
Thanks
Chin Liang
Quoted 3 lines
Best regards,
Marek Vasut
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
In reply to Marek VasutQuoted 34 lines · Marek Vasut
Quoted 33 lines · Chin Liang See
Quoted 31 lines · Marek Vasut
Quoted 22 lines · Chin Liang See
Undefine
CONFIG_SPI_FLASH_USE_4K_SECTORSfor UBI and UBIFS support on serial NOR flashSigned-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig
---configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)(quoted diff) +0
-0b/configs/socfpga_cyclone5_defconfig index 864358c..4216b55 100644
configs/socfpga_cyclone5_defconfig CONFIG_DESIGNWARE_SPI=y · line 26
Quoted 6 lines
configs/socfpga_cyclone5_defconfig +1
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=nAnd for arriaV ... ? And sockit ? ;-)
Quoted 7 lines
Quoted 2 lines
haha too obsess testing on CV board :)
Let me include them into these series.These should be the only three boards which use QSPI NOR.
SoCrates, MCV and DE0 do not have QSPI NOR. SR1500 I believe also doesn't have one.
SR1500 does have QSPI NOR. Its the boot device.
Thanks,
Stefan
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Quoted 5 lines · Stefan Roese
Quoted 4 lines · Marek Vasut
Quoted 3 lines · Chin Liang See
Quoted 2 lines · Marek Vasut
On Tuesday, December 22, 2015 at 01:59:46 AM, Chin Liang See wrote:
[..]
Quoted 20 lines
Quoted 20 lines
Quoted 19 lines
Quoted 9 lines
Quoted 9 lines
(quoted diff) +0
-0b/configs/socfpga_cyclone5_defconfig index 864358c..4216b55 100644
configs/socfpga_cyclone5_defconfig +0
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=yQuoted 7 lines
configs/socfpga_cyclone5_defconfig CONFIG_DESIGNWARE_SPI=y · line 26
Quoted 5 lines
configs/socfpga_cyclone5_defconfig +1
-0CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=nAnd for arriaV ... ? And sockit ? ;-)
haha too obsess testing on CV board :)
Let me include them into these series.
Quoted 7 lines
Quoted 5 lines
These should be the only three boards which use QSPI NOR.
SoCrates, MCV and DE0 do not have QSPI NOR. SR1500 I believe also doesn't have
one.SR1500 does have QSPI NOR. Its the boot device.
Just in time as going to create v3 now :)
Thanks
Chin Liang
Thanks,
Quoted 2 lines
Stefan
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
In reply to Chin Liang SeeQuoted 21 lines · Chin Liang See
Undefine
CONFIG_SPI_FLASH_USE_4K_SECTORSfor UBI and UBIFS support on serial NOR flashSigned-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig--- configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)configs/socfpga_cyclone5_defconfig +0
-0
configs/socfpga_cyclone5_defconfig CONFIG_DESIGNWARE_SPI=y · line 26
Quoted 4 lines
configs/socfpga_cyclone5_defconfig +1
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=n
Actually, do we usually specify =n in config files? It seems to be so rare it is an error.
Normally, we have something like "# CONFIG_SYS_MALLOC_F is not set" in config files.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH v2 2/5 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Quoted 31 lines · Pavel Machek
Quoted 22 lines · Chin Liang See
Undefine
CONFIG_SPI_FLASH_USE_4K_SECTORSfor UBI and UBIFS support on serial NOR flashSigned-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig--- configs/socfpga_cyclone5_defconfig | 1 + 1 file changed, 1 insertion(+)configs/socfpga_cyclone5_defconfig +0
-0configs/socfpga_cyclone5_defconfig CONFIG_DESIGNWARE_SPI=y · line 26
Quoted 4 lines
configs/socfpga_cyclone5_defconfig +1
-0@@ -23,3 +23,4 @@ CONFIG_DESIGNWARE_SPI=y CONFIG_DM_MMC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPI_FLASH_USE_4K_SECTORS=nActually, do we usually specify =n in config files? It seems to be so rare it is an error.
Quoted 3 lines
Normally, we have something like "#
CONFIG_SYS_MALLOC_Fis not set" in
config files.
yah, this was fixed by Marek.
Thanks
Chin Liang
Quoted 4 lines
Pavel
PATCH v2 3/5 arm: socfpga: cyclone5_socdk: Enable ubiload console command
In reply to Chin Liang SeeEnabling ubiload command to load kernel image and device tree from mtd part labeled "UBI". ubiload command will search the file from directory /boot.
---
Changes for v2
- use && instead of ; for ubiload
- update commit message
--- include/configs/socfpga_cyclone5_socdk.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
include/configs/socfpga_cyclone5_socdk.h +4 -1
@@ -74,7 +74,10 @@"qspirootfstype=jffs2\0" \"qspiboot=setenv bootargs " CONFIG_BOOTARGS \" root=${qspiroot} rw rootfstype=${qspirootfstype};" \ -"bootm ${loadaddr} - ${fdt_addr}\0" +"bootm ${loadaddr} - ${fdt_addr}\0" \ +"ubiload=ubi part UBI && ubifsmount ubi0 && " \ +"ubifsload ${loadaddr} /boot/${bootimage} && " \ +"ubifsload ${fdt_addr} /boot/${fdtimage}\0" /* The rest of the configuration is shared */#include <configs/socfpga_common.h>
Signature · 1 line
1.9.2.468.g3f0c02a
PATCH v2 4/5 arm: socfpga: cyclone5_socdk: Enable qspiload console command
In reply to Chin Liang SeeEnabling qspiload command which will load the kernel image and dtb from UBIFS within MTD partition labeled UBI.
---
Changes for v2
- use && instead ; for qspiload
--- include/configs/socfpga_cyclone5_socdk.h | 1 + 1 file changed, 1 insertion(+)
include/configs/socfpga_cyclone5_socdk.h +1 -0
@@ -70,6 +70,7 @@"mmcload=mmc rescan;" \"load mmc 0:1 ${loadaddr} ${bootimage};" \"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ +"qspiload=sf probe && mtdparts default && run ubiload\0" \"qspiroot=/dev/mtdblock0\0" \"qspirootfstype=jffs2\0" \"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
Signature · 1 line
1.9.2.468.g3f0c02a
PATCH v2 5/5 arm: socfpga: cyclone5_socdk: Update qspiboot to use UBIFS
In reply to Chin Liang SeeUpdate the qspiboot console command to use UBIFS instead of old jffs2 file system.
---
Changes for v2
- part of series
--- include/configs/socfpga_cyclone5_socdk.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
include/configs/socfpga_cyclone5_socdk.h +2 -4
@@ -71,11 +71,9 @@"load mmc 0:1 ${loadaddr} ${bootimage};" \"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \"qspiload=sf probe && mtdparts default && run ubiload\0" \ -"qspiroot=/dev/mtdblock0\0" \ -"qspirootfstype=jffs2\0" \"qspiboot=setenv bootargs " CONFIG_BOOTARGS \ -" root=${qspiroot} rw rootfstype=${qspirootfstype};" \ -"bootm ${loadaddr} - ${fdt_addr}\0" \ +" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;" \ +"bootz ${loadaddr} - ${fdt_addr}\0" \"ubiload=ubi part UBI && ubifsmount ubi0 && " \"ubifsload ${loadaddr} /boot/${bootimage} && " \"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
Signature · 1 line
1.9.2.468.g3f0c02a
PATCH v2 1/5 arm: socfpga: Enable ubi and ubifs support
In reply to Chin Liang SeeQuoted 9 lines · Chin Liang See
When QSPI and NAND is enabled, the ubi and ubifs support will be enabled too.
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>
Quoted 3 lines
---
Changes for v2
- moveCONFIG_SPI_FLASH_USE_4K_SECTORStoKconfig
All but 2/5 looks good :)
Best regards,
Marek Vasut