Skip to contentSkip to conversation

x86: qemu: add fw_cfg interface support for qemu-x86 targets

PATCH Superseded Miao Yan 3 participants 28 messages Dec 31, 2015 – Jan 4, 2016 x86

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Miao Yan

author
#0 lore raw

v4 cover x86: qemu: add fw_cfg interface support for qemu-x86 targets

The fw_cfg interface provided by QEMU allow guests to retrieve various information about the system, e.g. cpu number, variaous firmware data, kernel setup, etc. The fw_cfg interface can be accessed through 3 IO ports (on x86), using x86 in/out instructions.

- 0x510: select configuration items to access
- 0x511: reading this port will return data selected in 0x510
- 0x514: this can be used to detect if DMA interface is available

If fw_cfg DMA interface is available, it can be used to accelerate accesses.

This patchset adds the following supports for qemu-x86 targets:

+ the fw_cfg driver itself

+ add a U-Boot command 'fw' to support direct accessing kernel informtion from fw_cfg interface, this saves the time of loading them from hard disk or network again, through emulated devices.

+ use fw_cfg to get cpu number at runtime, so smp boot no longer relies on the cpu node hard-coded in dts files.

Changes in v4:
- drop [PATCH v3 7/8] and limit maximum supported cpu number
- chance 'fw load' to take second parameter for initrd load address
- change default initrd load address for qemu-x86

Miao Yan (8):
x86: qemu: add fw_cfg support
x86: qemu: add a cpu uclass driver for qemu target
x86: fix a typo in function name
x86: use actual CPU number for allocating memory
x86: qemu: add qemu_fwcfg_fdt_fixup()
x86: qemu: fix up cpu node in device tree
x86: qemu: adjust ramdisk load address
x86: qemu: add documentaion for the fw_cfg interface

 arch/x86/cpu/mp_init.c           |  12 +-
 arch/x86/cpu/qemu/Makefile       |   2 +-
 arch/x86/cpu/qemu/cpu.c          |  57 +++++++
 arch/x86/cpu/qemu/fw_cfg.c       | 333 +++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h       | 108 +++++++++++++
 arch/x86/cpu/qemu/qemu.c         |   7 +
 arch/x86/dts/qemu-x86_i440fx.dts |  19 +--
 arch/x86/dts/qemu-x86_q35.dts    |  19 +--
 doc/README.x86                   |  35 +++-
 include/configs/qemu-x86.h       |  13 ++
 10 files changed, 559 insertions(+), 46 deletions(-)
 create mode 100644 arch/x86/cpu/qemu/cpu.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.h
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v4 1/8 x86: qemu: add fw_cfg support

The QEMU fw_cfg interface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.

This patch adds support for QEMU fw_cfg interface.

---
Changes in v4:
- cleanups
- change 'fw load' to take second parameter for initrd load address

 arch/x86/cpu/qemu/Makefile |   2 +-
 arch/x86/cpu/qemu/fw_cfg.c | 268 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h |  97 ++++++++++++++++
 arch/x86/cpu/qemu/qemu.c   |   3 +
 4 files changed, 369 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.h
arch/x86/cpu/qemu/Makefile +1 -1
index 3f3958a..ad424ec 100644
@@ -7,5 +7,5 @@
 ifndef CONFIG_EFI_STUB
 obj-y += car.o dram.o
 endif
-obj-y += qemu.o
+obj-y += qemu.o fw_cfg.o
 obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
arch/x86/cpu/qemu/fw_cfg.c new file +268 -0

268 lines not on this page · raw message

arch/x86/cpu/qemu/fw_cfg.h new file +97 -0

97 lines not on this page · raw message

arch/x86/cpu/qemu/qemu.c +3 -0
index 1f93f72..d9ae066 100644
@@ -11,6 +11,7 @@
 #include <asm/processor.h>
 #include <asm/arch/device.h>
 #include <asm/arch/qemu.h>
+#include "fw_cfg.h"
 
 static bool i440fx;
 
@@ -57,6 +58,8 @@ static void qemu_chipset_init(void)
 		x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR,
 				       CONFIG_PCIE_ECAM_BASE | BAR_EN);
 	}
+
+	qemu_fwcfg_init();
 }
 
 int arch_cpu_init(void)
Signature · 1 line
1.9.1
#2 lore raw

PATCH v4 1/8 x86: qemu: add fw_cfg support

Hi Miao,

Quoted 12 lines · Miao Yan

The QEMU fw_cfg interface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.

This patch adds support for QEMU fw_cfg interface.

---
Changes in v4:
- cleanups
- change 'fw load' to take second parameter for initrd load address

Quoted 7 lines
 arch/x86/cpu/qemu/Makefile |   2 +-
 arch/x86/cpu/qemu/fw_cfg.c | 268 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h |  97 ++++++++++++++++
 arch/x86/cpu/qemu/qemu.c   |   3 +
 4 files changed, 369 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.h

But a few nits...

arch/x86/cpu/qemu/Makefile line 10

Quoted 11 lines
arch/x86/cpu/qemu/Makefile +1 -1
index 3f3958a..ad424ec 100644
@@ -7,5 +7,5 @@
 ifndef CONFIG_EFI_STUB
 obj-y += car.o dram.o
 endif
-obj-y += qemu.o
+obj-y += qemu.o fw_cfg.o

Can you put the new file first, so that the list is in alphabetical order?

Quoted 15 lines
arch/x86/cpu/qemu/Makefile +0 -0
 obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
arch/x86/cpu/qemu/fw_cfg.c new file +8 -0
new file mode 100644
index 0000000..9de8680
@@ -0,0 +1,268 @@
+/*
+ * (C) Copyright 2015 Miao Yan <[email protected]>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>

arch/x86/cpu/qemu/fw_cfg.c line 18

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+#include <errno.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "fw_cfg.h"
+
+static bool fwcfg_present;
+static bool fwcfg_dma_present;
+
+static void qemu_fwcfg_read_entry_pio(uint16_t entry,
+               uint32_t size, void *address)

Function comment - what does this do?

arch/x86/cpu/qemu/fw_cfg.c line 27

Quoted 9 lines
arch/x86/cpu/qemu/fw_cfg.c new file +9 -0
+{
+       uint32_t i = 0;
+       uint8_t *data = address;
+
+       /*
+        * writting FW_CFG_INVALID will cause
+        * read operation to resume at
+        * last offset, otherwise read will
+        * start at offset 0

Please can you format comments to 75 columns or thereabout?

Quoted 62 lines
arch/x86/cpu/qemu/fw_cfg.c new file +62 -0
+        */
+
+       if (entry != FW_CFG_INVALID)
+               outw(entry, FW_CONTROL_PORT);
+       while (size--)
+               data[i++] = inb(FW_DATA_PORT);
+}
+
+static void qemu_fwcfg_read_entry_dma(uint16_t entry,
+               uint32_t size, void *address)
+{
+       struct fw_cfg_dma_access dma;
+
+       dma.length = cpu_to_be32(size);
+       dma.address = cpu_to_be64((uintptr_t)address);
+       dma.control = cpu_to_be32(FW_CFG_DMA_READ);
+
+       /*
+        * writting FW_CFG_INVALID will cause
+        * read operation to resume at
+        * last offset, otherwise read will
+        * start at offset 0
+        */
+
+       if (entry != FW_CFG_INVALID)
+               dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
+
+       barrier();
+
+       debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
+             address, size, be32_to_cpu(dma.control));
+
+       outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
+
+       while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
+               __asm__ __volatile__ ("pause");
+}
+
+static bool qemu_fwcfg_present(void)
+{
+       uint32_t qemu;
+
+       qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+       return be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE;
+}
+
+static bool qemu_fwcfg_dma_present(void)
+{
+       uint8_t dma_enabled;
+
+       qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+       if (dma_enabled & FW_CFG_DMA_ENABLED)
+               return true;
+
+       return false;
+}
+
+static void qemu_fwcfg_read_entry(uint16_t entry,
+               uint32_t length, void *address)
+{
+       if (fwcfg_dma_present)
+               qemu_fwcfg_read_entry_dma(entry, length, address);

arch/x86/cpu/qemu/fw_cfg.c line 99

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+       else
+               qemu_fwcfg_read_entry_pio(entry, length, address);
+}
+
+int qemu_fwcfg_online_cpus(void)
+{
+       uint16_t nb_cpus;
+
+       if (!fwcfg_present)
+               return 1;

-ENODEV

arch/x86/cpu/qemu/fw_cfg.c line 106

Quoted 7 lines
arch/x86/cpu/qemu/fw_cfg.c new file +7 -0
+
+       qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
+
+       return le16_to_cpu(nb_cpus);
+}
+
+static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)

Function comment

Quoted 77 lines
arch/x86/cpu/qemu/fw_cfg.c new file +77 -0
+{
+       char *data_addr;
+       uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
+
+       qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
+       qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
+
+       if (setup_size == 0 || kernel_size == 0) {
+               printf("warning: no kernel available\n");
+               return -1;
+       }
+
+       data_addr = load_addr;
+       qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
+                             le32_to_cpu(setup_size), data_addr);
+       data_addr += le32_to_cpu(setup_size);
+
+       qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
+                             le32_to_cpu(kernel_size), data_addr);
+       data_addr += le32_to_cpu(kernel_size);
+
+       data_addr = initrd_addr;
+       qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
+       if (initrd_size == 0) {
+               printf("warning: no initrd available\n");
+       } else {
+               qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
+                                     le32_to_cpu(initrd_size), data_addr);
+               data_addr += le32_to_cpu(initrd_size);
+       }
+
+       qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
+       if (cmdline_size) {
+               qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
+                                     le32_to_cpu(cmdline_size), data_addr);
+               if (setenv("bootargs", data_addr) < 0)
+                       printf("warning: unable to change bootargs\n");
+       }
+
+       printf("loading kernel to address %p", load_addr);
+       if (initrd_size)
+               printf(" initrd %p, size 0x%x\n",
+                      initrd_addr,
+                      le32_to_cpu(initrd_size));
+       else
+               printf("\n");
+
+       return 0;
+}
+
+static int qemu_fwcfg_list_firmware(void)
+{
+       int i;
+       uint32_t count;
+       struct fw_cfg_files *files;
+
+       qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
+       if (!count)
+               return 0;
+
+       count = be32_to_cpu(count);
+       files = malloc(count * sizeof(struct fw_cfg_file));
+       if (!files)
+               return -ENOMEM;
+
+       files->count = count;
+       qemu_fwcfg_read_entry(FW_CFG_INVALID,
+                             count * sizeof(struct fw_cfg_file),
+                             files->files);
+
+       for (i = 0; i < files->count; i++)
+               printf("%-56s\n", files->files[i].name);
+       free(files);
+       return 0;
+}
+
+void qemu_fwcfg_init(void)

arch/x86/cpu/qemu/fw_cfg.c line 193

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+{
+       fwcfg_present = qemu_fwcfg_present();
+       if (fwcfg_present)
+               fwcfg_dma_present = qemu_fwcfg_dma_present();
+}
+
+static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       qemu_fwcfg_list_firmware();

Check return value and return CMD_RET_FAILURE if non-zero.

arch/x86/cpu/qemu/fw_cfg.c line 201

Quoted 8 lines
arch/x86/cpu/qemu/fw_cfg.c new file +8 -0
+
+       return 0;
+}
+
+static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());

But qemu_fwcfg_online_cpus() can fail.

Quoted 51 lines
arch/x86/cpu/qemu/fw_cfg.c new file +51 -0
+
+       return 0;
+}
+
+static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       char *env;
+       void *load_addr;
+       void *initrd_addr;
+
+       env = getenv("loadaddr");
+       load_addr = env ?
+               (void *)simple_strtoul(env, NULL, 16) :
+               (void *)CONFIG_LOADADDR;
+
+       env = getenv("ramdiskaddr");
+       initrd_addr = env ?
+               (void *)simple_strtoul(env, NULL, 16) :
+               (void *)CONFIG_RAMDISK_ADDR;
+
+       if (argc == 2) {
+               load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+               initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
+       } else if (argc == 1) {
+               load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+       }
+
+       return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
+}
+
+static cmd_tbl_t fwcfg_commands[] = {
+       U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
+       U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
+       U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
+};
+
+static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+       int ret;
+       cmd_tbl_t *fwcfg_cmd;
+
+       if (!fwcfg_present) {
+               printf("QEMU fw_cfg interface not found\n");
+               return CMD_RET_USAGE;
+       }
+
+       fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
+                                ARRAY_SIZE(fwcfg_commands));
+       argc -= 2;
+       argv += 2;

arch/x86/cpu/qemu/fw_cfg.c line 262

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+       if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
+               return CMD_RET_USAGE;
+
+       ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
+
+       return cmd_process_error(fwcfg_cmd, ret);
+}
+
+U_BOOT_CMD(
+       fw,     4,      1,      do_qemu_fw,

I worry that 'fw' is too generic. Perhaps qfw would be better?

arch/x86/cpu/qemu/fw_cfg.c line 266

Quoted 4 lines
arch/x86/cpu/qemu/fw_cfg.c new file +4 -0
+       "QEMU firmware interface",
+       "<command>\n"
+       "    - list                             : print firmware(s) currently loaded\n"
+       "    - cpus                             : print online cpu number\n"

print number of online CPUs

Quoted 82 lines
arch/x86/cpu/qemu/fw_cfg.c new file +2 -0
+       "    - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
+)
arch/x86/cpu/qemu/fw_cfg.h new file +74 -0
new file mode 100644
index 0000000..03ac27d
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2015 Miao Yan <[email protected]>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __FW_CFG__
+#define __FW_CFG__
+
+#define FW_CONTROL_PORT        0x510
+#define FW_DATA_PORT           0x511
+#define FW_DMA_PORT_LOW        0x514
+#define FW_DMA_PORT_HIGH       0x518
+
+enum qemu_fwcfg_items {
+       FW_CFG_SIGNATURE        = 0x00,
+       FW_CFG_ID               = 0x01,
+       FW_CFG_UUID             = 0x02,
+       FW_CFG_RAM_SIZE         = 0x03,
+       FW_CFG_NOGRAPHIC        = 0x04,
+       FW_CFG_NB_CPUS          = 0x05,
+       FW_CFG_MACHINE_ID       = 0x06,
+       FW_CFG_KERNEL_ADDR      = 0x07,
+       FW_CFG_KERNEL_SIZE      = 0x08,
+       FW_CFG_KERNEL_CMDLINE   = 0x09,
+       FW_CFG_INITRD_ADDR      = 0x0a,
+       FW_CFG_INITRD_SIZE      = 0x0b,
+       FW_CFG_BOOT_DEVICE      = 0x0c,
+       FW_CFG_NUMA             = 0x0d,
+       FW_CFG_BOOT_MENU        = 0x0e,
+       FW_CFG_MAX_CPUS         = 0x0f,
+       FW_CFG_KERNEL_ENTRY     = 0x10,
+       FW_CFG_KERNEL_DATA      = 0x11,
+       FW_CFG_INITRD_DATA      = 0x12,
+       FW_CFG_CMDLINE_ADDR     = 0x13,
+       FW_CFG_CMDLINE_SIZE     = 0x14,
+       FW_CFG_CMDLINE_DATA     = 0x15,
+       FW_CFG_SETUP_ADDR       = 0x16,
+       FW_CFG_SETUP_SIZE       = 0x17,
+       FW_CFG_SETUP_DATA       = 0x18,
+       FW_CFG_FILE_DIR         = 0x19,
+       FW_CFG_FILE_FIRST       = 0x20,
+       FW_CFG_WRITE_CHANNEL    = 0x4000,
+       FW_CFG_ARCH_LOCAL       = 0x8000,
+       FW_CFG_INVALID          = 0xffff,
+};
+
+#define FW_CFG_FILE_SLOTS      0x10
+#define FW_CFG_MAX_ENTRY       (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)
+#define FW_CFG_ENTRY_MASK       ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL)
+
+#define FW_CFG_MAX_FILE_PATH   56
+
+#define QEMU_FW_CFG_SIGNATURE  (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U')
+
+#define FW_CFG_DMA_ERROR       (1 << 0)
+#define FW_CFG_DMA_READ        (1 << 1)
+#define FW_CFG_DMA_SKIP        (1 << 2)
+#define FW_CFG_DMA_SELECT      (1 << 3)
+
+#define FW_CFG_DMA_ENABLED     (1 << 1)
+
+struct fw_cfg_file {
+       __be32 size;
+       __be16 select;
+       __be16 reserved;
+       char name[FW_CFG_MAX_FILE_PATH];
+};
+
+struct fw_cfg_files {
+       __be32 count;
+       struct fw_cfg_file files[];
+};
+

arch/x86/cpu/qemu/fw_cfg.h line 84

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10 -0
+struct fw_cfg_dma_access {
+       __be32 control;
+       __be32 length;
+       __be64 address;
+};
+
+/**
+ * Initialize QEMU fw_cfg interface
+ *
+ * @return:   None

You can drop this line

Quoted 35 lines
arch/x86/cpu/qemu/fw_cfg.h new file +13 -0
+ */
+
+void qemu_fwcfg_init(void);
+
+/**
+ * Get system cpu number
+ *
+ * @return:   cpu number in system
+ */
+
+int qemu_fwcfg_online_cpus(void);
+
+#endif
arch/x86/cpu/qemu/qemu.c +3 -1
index 1f93f72..d9ae066 100644
@@ -11,6 +11,7 @@
 #include <asm/processor.h>
 #include <asm/arch/device.h>
 #include <asm/arch/qemu.h>
+#include "fw_cfg.h"
 
 static bool i440fx;
 
@@ -57,6 +58,8 @@ static void qemu_chipset_init(void)
                x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR,
                                       CONFIG_PCIE_ECAM_BASE | BAR_EN);
        }
+
+       qemu_fwcfg_init();
 }
 
 int arch_cpu_init(void)
--
Quoted 2 lines

1.9.1

Regards,
Simon

author
#3 lore raw

PATCH v4 1/8 x86: qemu: add fw_cfg support

Hi Simon,

2015-12-31 13:07 GMT+08:00 Simon Glass <[email protected]>:

Quoted 147 lines

Hi Miao,

Quoted 12 lines · Miao Yan

The QEMU fw_cfg interface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.

This patch adds support for QEMU fw_cfg interface.

---
Changes in v4:
- cleanups
- change 'fw load' to take second parameter for initrd load address

Quoted 7 lines
 arch/x86/cpu/qemu/Makefile |   2 +-
 arch/x86/cpu/qemu/fw_cfg.c | 268 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h |  97 ++++++++++++++++
 arch/x86/cpu/qemu/qemu.c   |   3 +
 4 files changed, 369 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.h

But a few nits...

arch/x86/cpu/qemu/Makefile line 10

Quoted 11 lines
arch/x86/cpu/qemu/Makefile +1 -1
index 3f3958a..ad424ec 100644
@@ -7,5 +7,5 @@
 ifndef CONFIG_EFI_STUB
 obj-y += car.o dram.o
 endif
-obj-y += qemu.o
+obj-y += qemu.o fw_cfg.o

Can you put the new file first, so that the list is in alphabetical order?

Quoted 15 lines
arch/x86/cpu/qemu/Makefile +0 -0
 obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
arch/x86/cpu/qemu/fw_cfg.c new file +8 -0
new file mode 100644
index 0000000..9de8680
@@ -0,0 +1,268 @@
+/*
+ * (C) Copyright 2015 Miao Yan <[email protected]>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>

arch/x86/cpu/qemu/fw_cfg.c line 18

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+#include <errno.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "fw_cfg.h"
+
+static bool fwcfg_present;
+static bool fwcfg_dma_present;
+
+static void qemu_fwcfg_read_entry_pio(uint16_t entry,
+               uint32_t size, void *address)

Function comment - what does this do?

arch/x86/cpu/qemu/fw_cfg.c line 27

Quoted 9 lines
arch/x86/cpu/qemu/fw_cfg.c new file +9 -0
+{
+       uint32_t i = 0;
+       uint8_t *data = address;
+
+       /*
+        * writting FW_CFG_INVALID will cause
+        * read operation to resume at
+        * last offset, otherwise read will
+        * start at offset 0

Please can you format comments to 75 columns or thereabout?

Quoted 66 lines
arch/x86/cpu/qemu/fw_cfg.c new file +66 -0
+        */
+
+       if (entry != FW_CFG_INVALID)
+               outw(entry, FW_CONTROL_PORT);
+       while (size--)
+               data[i++] = inb(FW_DATA_PORT);
+}
+
+static void qemu_fwcfg_read_entry_dma(uint16_t entry,
+               uint32_t size, void *address)
+{
+       struct fw_cfg_dma_access dma;
+
+       dma.length = cpu_to_be32(size);
+       dma.address = cpu_to_be64((uintptr_t)address);
+       dma.control = cpu_to_be32(FW_CFG_DMA_READ);
+
+       /*
+        * writting FW_CFG_INVALID will cause
+        * read operation to resume at
+        * last offset, otherwise read will
+        * start at offset 0
+        */
+
+       if (entry != FW_CFG_INVALID)
+               dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
+
+       barrier();
+
+       debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
+             address, size, be32_to_cpu(dma.control));
+
+       outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
+
+       while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
+               __asm__ __volatile__ ("pause");
+}
+
+static bool qemu_fwcfg_present(void)
+{
+       uint32_t qemu;
+
+       qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+       return be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE;
+}
+
+static bool qemu_fwcfg_dma_present(void)
+{
+       uint8_t dma_enabled;
+
+       qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+       if (dma_enabled & FW_CFG_DMA_ENABLED)
+               return true;
+
+       return false;
+}
+
+static void qemu_fwcfg_read_entry(uint16_t entry,
+               uint32_t length, void *address)
+{
+       if (fwcfg_dma_present)
+               qemu_fwcfg_read_entry_dma(entry, length, address);
+       else
+               qemu_fwcfg_read_entry_pio(entry, length, address);
+}
+
Quoted 8 lines

arch/x86/cpu/qemu/fw_cfg.c line 99

Quoted 6 lines
arch/x86/cpu/qemu/fw_cfg.c new file +6 -0
+int qemu_fwcfg_online_cpus(void)
+{
+       uint16_t nb_cpus;
+
+       if (!fwcfg_present)
+               return 1;

-ENODEV

Can we return 1 cpu if fw_cfg interface is not avaliable (which is quite unlikey),
and print a warning maybe ? Because there has to be one cpu at least and returning
-ENODEV wouldn't make much difference.

I'll fix rest of your comments and thanks for the review.

Miao

Quoted 318 lines

arch/x86/cpu/qemu/fw_cfg.c line 106

Quoted 8 lines
arch/x86/cpu/qemu/fw_cfg.c new file +7 -0
+
+       qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
+
+       return le16_to_cpu(nb_cpus);
+}
+
+static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)

Function comment

Quoted 77 lines
arch/x86/cpu/qemu/fw_cfg.c new file +77 -0
+{
+       char *data_addr;
+       uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
+
+       qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
+       qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
+
+       if (setup_size == 0 || kernel_size == 0) {
+               printf("warning: no kernel available\n");
+               return -1;
+       }
+
+       data_addr = load_addr;
+       qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
+                             le32_to_cpu(setup_size), data_addr);
+       data_addr += le32_to_cpu(setup_size);
+
+       qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
+                             le32_to_cpu(kernel_size), data_addr);
+       data_addr += le32_to_cpu(kernel_size);
+
+       data_addr = initrd_addr;
+       qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
+       if (initrd_size == 0) {
+               printf("warning: no initrd available\n");
+       } else {
+               qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
+                                     le32_to_cpu(initrd_size), data_addr);
+               data_addr += le32_to_cpu(initrd_size);
+       }
+
+       qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
+       if (cmdline_size) {
+               qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
+                                     le32_to_cpu(cmdline_size), data_addr);
+               if (setenv("bootargs", data_addr) < 0)
+                       printf("warning: unable to change bootargs\n");
+       }
+
+       printf("loading kernel to address %p", load_addr);
+       if (initrd_size)
+               printf(" initrd %p, size 0x%x\n",
+                      initrd_addr,
+                      le32_to_cpu(initrd_size));
+       else
+               printf("\n");
+
+       return 0;
+}
+
+static int qemu_fwcfg_list_firmware(void)
+{
+       int i;
+       uint32_t count;
+       struct fw_cfg_files *files;
+
+       qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
+       if (!count)
+               return 0;
+
+       count = be32_to_cpu(count);
+       files = malloc(count * sizeof(struct fw_cfg_file));
+       if (!files)
+               return -ENOMEM;
+
+       files->count = count;
+       qemu_fwcfg_read_entry(FW_CFG_INVALID,
+                             count * sizeof(struct fw_cfg_file),
+                             files->files);
+
+       for (i = 0; i < files->count; i++)
+               printf("%-56s\n", files->files[i].name);
+       free(files);
+       return 0;
+}
+
+void qemu_fwcfg_init(void)

arch/x86/cpu/qemu/fw_cfg.c line 193

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+{
+       fwcfg_present = qemu_fwcfg_present();
+       if (fwcfg_present)
+               fwcfg_dma_present = qemu_fwcfg_dma_present();
+}
+
+static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       qemu_fwcfg_list_firmware();

Check return value and return CMD_RET_FAILURE if non-zero.

arch/x86/cpu/qemu/fw_cfg.c line 201

Quoted 8 lines
arch/x86/cpu/qemu/fw_cfg.c new file +8 -0
+
+       return 0;
+}
+
+static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());

But qemu_fwcfg_online_cpus() can fail.

Quoted 51 lines
arch/x86/cpu/qemu/fw_cfg.c new file +51 -0
+
+       return 0;
+}
+
+static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       char *env;
+       void *load_addr;
+       void *initrd_addr;
+
+       env = getenv("loadaddr");
+       load_addr = env ?
+               (void *)simple_strtoul(env, NULL, 16) :
+               (void *)CONFIG_LOADADDR;
+
+       env = getenv("ramdiskaddr");
+       initrd_addr = env ?
+               (void *)simple_strtoul(env, NULL, 16) :
+               (void *)CONFIG_RAMDISK_ADDR;
+
+       if (argc == 2) {
+               load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+               initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
+       } else if (argc == 1) {
+               load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+       }
+
+       return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
+}
+
+static cmd_tbl_t fwcfg_commands[] = {
+       U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
+       U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
+       U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
+};
+
+static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+       int ret;
+       cmd_tbl_t *fwcfg_cmd;
+
+       if (!fwcfg_present) {
+               printf("QEMU fw_cfg interface not found\n");
+               return CMD_RET_USAGE;
+       }
+
+       fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
+                                ARRAY_SIZE(fwcfg_commands));
+       argc -= 2;
+       argv += 2;

arch/x86/cpu/qemu/fw_cfg.c line 262

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+       if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
+               return CMD_RET_USAGE;
+
+       ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
+
+       return cmd_process_error(fwcfg_cmd, ret);
+}
+
+U_BOOT_CMD(
+       fw,     4,      1,      do_qemu_fw,

I worry that 'fw' is too generic. Perhaps qfw would be better?

arch/x86/cpu/qemu/fw_cfg.c line 266

Quoted 4 lines
arch/x86/cpu/qemu/fw_cfg.c new file +4 -0
+       "QEMU firmware interface",
+       "<command>\n"
+       "    - list                             : print firmware(s) currently loaded\n"
+       "    - cpus                             : print online cpu number\n"

print number of online CPUs

Quoted 82 lines
arch/x86/cpu/qemu/fw_cfg.c new file +2 -0
+       "    - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
+)
arch/x86/cpu/qemu/fw_cfg.h new file +74 -0
new file mode 100644
index 0000000..03ac27d
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2015 Miao Yan <[email protected]>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __FW_CFG__
+#define __FW_CFG__
+
+#define FW_CONTROL_PORT        0x510
+#define FW_DATA_PORT           0x511
+#define FW_DMA_PORT_LOW        0x514
+#define FW_DMA_PORT_HIGH       0x518
+
+enum qemu_fwcfg_items {
+       FW_CFG_SIGNATURE        = 0x00,
+       FW_CFG_ID               = 0x01,
+       FW_CFG_UUID             = 0x02,
+       FW_CFG_RAM_SIZE         = 0x03,
+       FW_CFG_NOGRAPHIC        = 0x04,
+       FW_CFG_NB_CPUS          = 0x05,
+       FW_CFG_MACHINE_ID       = 0x06,
+       FW_CFG_KERNEL_ADDR      = 0x07,
+       FW_CFG_KERNEL_SIZE      = 0x08,
+       FW_CFG_KERNEL_CMDLINE   = 0x09,
+       FW_CFG_INITRD_ADDR      = 0x0a,
+       FW_CFG_INITRD_SIZE      = 0x0b,
+       FW_CFG_BOOT_DEVICE      = 0x0c,
+       FW_CFG_NUMA             = 0x0d,
+       FW_CFG_BOOT_MENU        = 0x0e,
+       FW_CFG_MAX_CPUS         = 0x0f,
+       FW_CFG_KERNEL_ENTRY     = 0x10,
+       FW_CFG_KERNEL_DATA      = 0x11,
+       FW_CFG_INITRD_DATA      = 0x12,
+       FW_CFG_CMDLINE_ADDR     = 0x13,
+       FW_CFG_CMDLINE_SIZE     = 0x14,
+       FW_CFG_CMDLINE_DATA     = 0x15,
+       FW_CFG_SETUP_ADDR       = 0x16,
+       FW_CFG_SETUP_SIZE       = 0x17,
+       FW_CFG_SETUP_DATA       = 0x18,
+       FW_CFG_FILE_DIR         = 0x19,
+       FW_CFG_FILE_FIRST       = 0x20,
+       FW_CFG_WRITE_CHANNEL    = 0x4000,
+       FW_CFG_ARCH_LOCAL       = 0x8000,
+       FW_CFG_INVALID          = 0xffff,
+};
+
+#define FW_CFG_FILE_SLOTS      0x10
+#define FW_CFG_MAX_ENTRY       (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)
+#define FW_CFG_ENTRY_MASK       ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL)
+
+#define FW_CFG_MAX_FILE_PATH   56
+
+#define QEMU_FW_CFG_SIGNATURE  (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U')
+
+#define FW_CFG_DMA_ERROR       (1 << 0)
+#define FW_CFG_DMA_READ        (1 << 1)
+#define FW_CFG_DMA_SKIP        (1 << 2)
+#define FW_CFG_DMA_SELECT      (1 << 3)
+
+#define FW_CFG_DMA_ENABLED     (1 << 1)
+
+struct fw_cfg_file {
+       __be32 size;
+       __be16 select;
+       __be16 reserved;
+       char name[FW_CFG_MAX_FILE_PATH];
+};
+
+struct fw_cfg_files {
+       __be32 count;
+       struct fw_cfg_file files[];
+};
+

arch/x86/cpu/qemu/fw_cfg.h line 84

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10 -0
+struct fw_cfg_dma_access {
+       __be32 control;
+       __be32 length;
+       __be64 address;
+};
+
+/**
+ * Initialize QEMU fw_cfg interface
+ *
+ * @return:   None

You can drop this line

Quoted 35 lines
arch/x86/cpu/qemu/fw_cfg.h new file +13 -0
+ */
+
+void qemu_fwcfg_init(void);
+
+/**
+ * Get system cpu number
+ *
+ * @return:   cpu number in system
+ */
+
+int qemu_fwcfg_online_cpus(void);
+
+#endif
arch/x86/cpu/qemu/qemu.c +3 -1
index 1f93f72..d9ae066 100644
@@ -11,6 +11,7 @@
 #include <asm/processor.h>
 #include <asm/arch/device.h>
 #include <asm/arch/qemu.h>
+#include "fw_cfg.h"
 
 static bool i440fx;
 
@@ -57,6 +58,8 @@ static void qemu_chipset_init(void)
                x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR,
                                       CONFIG_PCIE_ECAM_BASE | BAR_EN);
        }
+
+       qemu_fwcfg_init();
 }
 
 int arch_cpu_init(void)
--
Quoted 2 lines

1.9.1

Regards,
Simon

#4 lore raw

PATCH v4 1/8 x86: qemu: add fw_cfg support

Hi Miao,

Quoted 29 lines · Miao Yan

Hi Simon,

2015-12-31 13:07 GMT+08:00 Simon Glass <[email protected]>:

Quoted 26 lines

Hi Miao,

Quoted 12 lines · Miao Yan

The QEMU fw_cfg interface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.

This patch adds support for QEMU fw_cfg interface.

---
Changes in v4:
- cleanups
- change 'fw load' to take second parameter for initrd load address

Quoted 7 lines
 arch/x86/cpu/qemu/Makefile |   2 +-
 arch/x86/cpu/qemu/fw_cfg.c | 268 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h |  97 ++++++++++++++++
 arch/x86/cpu/qemu/qemu.c   |   3 +
 4 files changed, 369 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.h

But a few nits...

[snip]

Quoted 10 lines
Quoted 8 lines

arch/x86/cpu/qemu/fw_cfg.c line 99

Quoted 6 lines
arch/x86/cpu/qemu/fw_cfg.c new file +6 -0
+int qemu_fwcfg_online_cpus(void)
+{
+       uint16_t nb_cpus;
+
+       if (!fwcfg_present)
+               return 1;

-ENODEV

Quoted 5 lines

Can we return 1 cpu if fw_cfg interface is not avaliable (which is quite unlikey),
and print a warning maybe ? Because there has to be one cpu at least and returning
-ENODEV wouldn't make much difference.

I see. In that case I think it is better if qemu_fwcfg_online_cpus() returns an error and its caller can detect -ENODEV and use '1' as the value. Then the decision as to how to deal with the error is handled at the layer that is taking action.

Quoted 5 lines

I'll fix rest of your comments and thanks for the review.

Miao

[snip]

#5 lore raw

PATCH v4 1/8 x86: qemu: add fw_cfg support

In reply to Miao Yan

Hi Miao,

Quoted 248 lines · Miao Yan

The QEMU fw_cfg interface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc.

This patch adds support for QEMU fw_cfg interface.

---
Changes in v4:
- cleanups
- change 'fw load' to take second parameter for initrd load address

 arch/x86/cpu/qemu/Makefile |   2 +-
 arch/x86/cpu/qemu/fw_cfg.c | 268 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h |  97 ++++++++++++++++
 arch/x86/cpu/qemu/qemu.c   |   3 +
 4 files changed, 369 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.h
arch/x86/cpu/qemu/Makefile +1 -1
index 3f3958a..ad424ec 100644
@@ -7,5 +7,5 @@
 ifndef CONFIG_EFI_STUB
 obj-y += car.o dram.o
 endif
-obj-y += qemu.o
+obj-y += qemu.o fw_cfg.o
 obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
arch/x86/cpu/qemu/fw_cfg.c new file +211 -0
new file mode 100644
index 0000000..9de8680
@@ -0,0 +1,268 @@
+/*
+ * (C) Copyright 2015 Miao Yan <[email protected]>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "fw_cfg.h"
+
+static bool fwcfg_present;
+static bool fwcfg_dma_present;
+
+static void qemu_fwcfg_read_entry_pio(uint16_t entry,
+               uint32_t size, void *address)
+{
+       uint32_t i = 0;
+       uint8_t *data = address;
+
+       /*
+        * writting FW_CFG_INVALID will cause
+        * read operation to resume at
+        * last offset, otherwise read will
+        * start at offset 0
+        */
+
+       if (entry != FW_CFG_INVALID)
+               outw(entry, FW_CONTROL_PORT);
+       while (size--)
+               data[i++] = inb(FW_DATA_PORT);
+}
+
+static void qemu_fwcfg_read_entry_dma(uint16_t entry,
+               uint32_t size, void *address)
+{
+       struct fw_cfg_dma_access dma;
+
+       dma.length = cpu_to_be32(size);
+       dma.address = cpu_to_be64((uintptr_t)address);
+       dma.control = cpu_to_be32(FW_CFG_DMA_READ);
+
+       /*
+        * writting FW_CFG_INVALID will cause
+        * read operation to resume at
+        * last offset, otherwise read will
+        * start at offset 0
+        */
+
+       if (entry != FW_CFG_INVALID)
+               dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
+
+       barrier();
+
+       debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
+             address, size, be32_to_cpu(dma.control));
+
+       outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
+
+       while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
+               __asm__ __volatile__ ("pause");
+}
+
+static bool qemu_fwcfg_present(void)
+{
+       uint32_t qemu;
+
+       qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+       return be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE;
+}
+
+static bool qemu_fwcfg_dma_present(void)
+{
+       uint8_t dma_enabled;
+
+       qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+       if (dma_enabled & FW_CFG_DMA_ENABLED)
+               return true;
+
+       return false;
+}
+
+static void qemu_fwcfg_read_entry(uint16_t entry,
+               uint32_t length, void *address)
+{
+       if (fwcfg_dma_present)
+               qemu_fwcfg_read_entry_dma(entry, length, address);
+       else
+               qemu_fwcfg_read_entry_pio(entry, length, address);
+}
+
+int qemu_fwcfg_online_cpus(void)
+{
+       uint16_t nb_cpus;
+
+       if (!fwcfg_present)
+               return 1;
+
+       qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
+
+       return le16_to_cpu(nb_cpus);
+}
+
+static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
+{
+       char *data_addr;
+       uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
+
+       qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
+       qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
+
+       if (setup_size == 0 || kernel_size == 0) {
+               printf("warning: no kernel available\n");
+               return -1;
+       }
+
+       data_addr = load_addr;
+       qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
+                             le32_to_cpu(setup_size), data_addr);
+       data_addr += le32_to_cpu(setup_size);
+
+       qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
+                             le32_to_cpu(kernel_size), data_addr);
+       data_addr += le32_to_cpu(kernel_size);
+
+       data_addr = initrd_addr;
+       qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
+       if (initrd_size == 0) {
+               printf("warning: no initrd available\n");
+       } else {
+               qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
+                                     le32_to_cpu(initrd_size), data_addr);
+               data_addr += le32_to_cpu(initrd_size);
+       }
+
+       qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
+       if (cmdline_size) {
+               qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
+                                     le32_to_cpu(cmdline_size), data_addr);
+               if (setenv("bootargs", data_addr) < 0)
+                       printf("warning: unable to change bootargs\n");
+       }
+
+       printf("loading kernel to address %p", load_addr);
+       if (initrd_size)
+               printf(" initrd %p, size 0x%x\n",
+                      initrd_addr,
+                      le32_to_cpu(initrd_size));
+       else
+               printf("\n");
+
+       return 0;
+}
+
+static int qemu_fwcfg_list_firmware(void)
+{
+       int i;
+       uint32_t count;
+       struct fw_cfg_files *files;
+
+       qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
+       if (!count)
+               return 0;
+
+       count = be32_to_cpu(count);
+       files = malloc(count * sizeof(struct fw_cfg_file));
+       if (!files)
+               return -ENOMEM;
+
+       files->count = count;
+       qemu_fwcfg_read_entry(FW_CFG_INVALID,
+                             count * sizeof(struct fw_cfg_file),
+                             files->files);
+
+       for (i = 0; i < files->count; i++)
+               printf("%-56s\n", files->files[i].name);
+       free(files);
+       return 0;
+}
+
+void qemu_fwcfg_init(void)
+{
+       fwcfg_present = qemu_fwcfg_present();
+       if (fwcfg_present)
+               fwcfg_dma_present = qemu_fwcfg_dma_present();
+}
+
+static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       qemu_fwcfg_list_firmware();
+
+       return 0;
+}
+
+static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
+
+       return 0;
+}
+
+static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
+               int argc, char * const argv[])
+{
+       char *env;
+       void *load_addr;
+       void *initrd_addr;

arch/x86/cpu/qemu/fw_cfg.c line 221

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.c new file +10 -0
+
+       env = getenv("loadaddr");
+       load_addr = env ?
+               (void *)simple_strtoul(env, NULL, 16) :
+               (void *)CONFIG_LOADADDR;
+
+       env = getenv("ramdiskaddr");
+       initrd_addr = env ?
+               (void *)simple_strtoul(env, NULL, 16) :
+               (void *)CONFIG_RAMDISK_ADDR;

This does not build as CONFIG_RAMDISK_ADDR is introduced in a later patch. Please reorder the patches.

Quoted 92 lines
arch/x86/cpu/qemu/fw_cfg.c new file +47 -0
+
+       if (argc == 2) {
+               load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+               initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
+       } else if (argc == 1) {
+               load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+       }
+
+       return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
+}
+
+static cmd_tbl_t fwcfg_commands[] = {
+       U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
+       U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
+       U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
+};
+
+static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+       int ret;
+       cmd_tbl_t *fwcfg_cmd;
+
+       if (!fwcfg_present) {
+               printf("QEMU fw_cfg interface not found\n");
+               return CMD_RET_USAGE;
+       }
+
+       fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
+                                ARRAY_SIZE(fwcfg_commands));
+       argc -= 2;
+       argv += 2;
+       if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
+               return CMD_RET_USAGE;
+
+       ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
+
+       return cmd_process_error(fwcfg_cmd, ret);
+}
+
+U_BOOT_CMD(
+       fw,     4,      1,      do_qemu_fw,
+       "QEMU firmware interface",
+       "<command>\n"
+       "    - list                             : print firmware(s) currently loaded\n"
+       "    - cpus                             : print online cpu number\n"
+       "    - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
+)
arch/x86/cpu/qemu/fw_cfg.h new file +39 -0
new file mode 100644
index 0000000..03ac27d
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2015 Miao Yan <[email protected]>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __FW_CFG__
+#define __FW_CFG__
+
+#define FW_CONTROL_PORT        0x510
+#define FW_DATA_PORT           0x511
+#define FW_DMA_PORT_LOW        0x514
+#define FW_DMA_PORT_HIGH       0x518
+
+enum qemu_fwcfg_items {
+       FW_CFG_SIGNATURE        = 0x00,
+       FW_CFG_ID               = 0x01,
+       FW_CFG_UUID             = 0x02,
+       FW_CFG_RAM_SIZE         = 0x03,
+       FW_CFG_NOGRAPHIC        = 0x04,
+       FW_CFG_NB_CPUS          = 0x05,
+       FW_CFG_MACHINE_ID       = 0x06,
+       FW_CFG_KERNEL_ADDR      = 0x07,
+       FW_CFG_KERNEL_SIZE      = 0x08,
+       FW_CFG_KERNEL_CMDLINE   = 0x09,
+       FW_CFG_INITRD_ADDR      = 0x0a,
+       FW_CFG_INITRD_SIZE      = 0x0b,
+       FW_CFG_BOOT_DEVICE      = 0x0c,
+       FW_CFG_NUMA             = 0x0d,
+       FW_CFG_BOOT_MENU        = 0x0e,
+       FW_CFG_MAX_CPUS         = 0x0f,
+       FW_CFG_KERNEL_ENTRY     = 0x10,
+       FW_CFG_KERNEL_DATA      = 0x11,
+       FW_CFG_INITRD_DATA      = 0x12,
+       FW_CFG_CMDLINE_ADDR     = 0x13,
+       FW_CFG_CMDLINE_SIZE     = 0x14,
+       FW_CFG_CMDLINE_DATA     = 0x15,
+       FW_CFG_SETUP_ADDR       = 0x16,
+       FW_CFG_SETUP_SIZE       = 0x17,

arch/x86/cpu/qemu/fw_cfg.h line 49

Quoted 10 lines
arch/x86/cpu/qemu/fw_cfg.h new file +10 -0
+       FW_CFG_SETUP_DATA       = 0x18,
+       FW_CFG_FILE_DIR         = 0x19,
+       FW_CFG_FILE_FIRST       = 0x20,
+       FW_CFG_WRITE_CHANNEL    = 0x4000,
+       FW_CFG_ARCH_LOCAL       = 0x8000,
+       FW_CFG_INVALID          = 0xffff,
+};
+
+#define FW_CFG_FILE_SLOTS      0x10
+#define FW_CFG_MAX_ENTRY       (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)

Sorry, one more nits: please add space around '+'

Quoted 61 lines
arch/x86/cpu/qemu/fw_cfg.h new file +48 -0
+#define FW_CFG_ENTRY_MASK       ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL)
+
+#define FW_CFG_MAX_FILE_PATH   56
+
+#define QEMU_FW_CFG_SIGNATURE  (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U')
+
+#define FW_CFG_DMA_ERROR       (1 << 0)
+#define FW_CFG_DMA_READ        (1 << 1)
+#define FW_CFG_DMA_SKIP        (1 << 2)
+#define FW_CFG_DMA_SELECT      (1 << 3)
+
+#define FW_CFG_DMA_ENABLED     (1 << 1)
+
+struct fw_cfg_file {
+       __be32 size;
+       __be16 select;
+       __be16 reserved;
+       char name[FW_CFG_MAX_FILE_PATH];
+};
+
+struct fw_cfg_files {
+       __be32 count;
+       struct fw_cfg_file files[];
+};
+
+struct fw_cfg_dma_access {
+       __be32 control;
+       __be32 length;
+       __be64 address;
+};
+
+/**
+ * Initialize QEMU fw_cfg interface
+ *
+ * @return:   None
+ */
+
+void qemu_fwcfg_init(void);
+
+/**
+ * Get system cpu number
+ *
+ * @return:   cpu number in system
+ */
+
+int qemu_fwcfg_online_cpus(void);
+
+#endif
arch/x86/cpu/qemu/qemu.c +1 -0
index 1f93f72..d9ae066 100644
@@ -11,6 +11,7 @@
 #include <asm/processor.h>
 #include <asm/arch/device.h>
 #include <asm/arch/qemu.h>
+#include "fw_cfg.h"
 
 static bool i440fx;
 

arch/x86/cpu/qemu/qemu.c static void qemu_chipset_init(void)

Quoted 9 lines
arch/x86/cpu/qemu/qemu.c +2 -1
@@ -57,6 +58,8 @@ static void qemu_chipset_init(void)
                x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR,
                                       CONFIG_PCIE_ECAM_BASE | BAR_EN);
        }
+
+       qemu_fwcfg_init();
 }
 
 int arch_cpu_init(void)
--

Regards,
Bin

author
#6 lore raw

PATCH v4 2/8 x86: qemu: add a cpu uclass driver for qemu target

In reply to Miao Yan

Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well.

This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware.

Signed-off-by <[email protected]>
---
 arch/x86/cpu/qemu/Makefile       |  2 +-
 arch/x86/cpu/qemu/cpu.c          | 57 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/dts/qemu-x86_i440fx.dts |  4 +--
 arch/x86/dts/qemu-x86_q35.dts    |  4 +--
 4 files changed, 62 insertions(+), 5 deletions(-)
 create mode 100644 arch/x86/cpu/qemu/cpu.c
arch/x86/cpu/qemu/Makefile +1 -1
index ad424ec..027a12f 100644
@@ -7,5 +7,5 @@
 ifndef CONFIG_EFI_STUB
 obj-y += car.o dram.o
 endif
-obj-y += qemu.o fw_cfg.o
+obj-y += qemu.o fw_cfg.o cpu.o
 obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi.o dsdt.o
arch/x86/cpu/qemu/cpu.c new file +57 -0

57 lines not on this page · raw message

arch/x86/dts/qemu-x86_i440fx.dts +2 -2
index 8a06229..4332204 100644
@@ -32,14 +32,14 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			compatible = "cpu-x86";
+			compatible = "cpu-qemu";
 			reg = <0>;
 			intel,apic-id = <0>;
 		};
 
 		cpu at 1 {
 			device_type = "cpu";
-			compatible = "cpu-x86";
+			compatible = "cpu-qemu";
 			reg = <1>;
 			intel,apic-id = <1>;
 		};
arch/x86/dts/qemu-x86_q35.dts +2 -2
index 0b685c8..3e2cfac 100644
@@ -43,14 +43,14 @@
 
 		cpu at 0 {
 			device_type = "cpu";
-			compatible = "cpu-x86";
+			compatible = "cpu-qemu";
 			reg = <0>;
 			intel,apic-id = <0>;
 		};
 
 		cpu at 1 {
 			device_type = "cpu";
-			compatible = "cpu-x86";
+			compatible = "cpu-qemu";
 			reg = <1>;
 			intel,apic-id = <1>;
 		};
Signature · 1 line
1.9.1
#7 lore raw

PATCH v4 2/8 x86: qemu: add a cpu uclass driver for qemu target

Quoted 8 lines · Miao Yan

Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well.

This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware.

Please try to wrap your commit messages to around 75 columns.

Quoted 9 lines
Signed-off-by <[email protected]>
---
 arch/x86/cpu/qemu/Makefile       |  2 +-
 arch/x86/cpu/qemu/cpu.c          | 57 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/dts/qemu-x86_i440fx.dts |  4 +--
 arch/x86/dts/qemu-x86_q35.dts    |  4 +--
 4 files changed, 62 insertions(+), 5 deletions(-)
 create mode 100644 arch/x86/cpu/qemu/cpu.c
#8 lore raw

PATCH v4 2/8 x86: qemu: add a cpu uclass driver for qemu target

In reply to Miao Yan
Quoted 9 lines · Miao Yan

Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well.

This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware.

Quoted 9 lines
Signed-off-by <[email protected]>
---
 arch/x86/cpu/qemu/Makefile       |  2 +-
 arch/x86/cpu/qemu/cpu.c          | 57 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/dts/qemu-x86_i440fx.dts |  4 +--
 arch/x86/dts/qemu-x86_q35.dts    |  4 +--
 4 files changed, 62 insertions(+), 5 deletions(-)
 create mode 100644 arch/x86/cpu/qemu/cpu.c
author
#9 lore raw

PATCH v4 3/8 x86: fix a typo in function name

In reply to Miao Yan

Rename 'find_cpu_by_apid_id' to 'find_cpu_by_apic_id'. This should be a typo.

---
 arch/x86/cpu/mp_init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/cpu/mp_init.c +3 -3
index 4334f5b..2f34317 100644
@@ -104,7 +104,7 @@ static void ap_do_flight_plan(struct udevice *cpu)
 	}
 }
 
-static int find_cpu_by_apid_id(int apic_id, struct udevice **devp)
+static int find_cpu_by_apic_id(int apic_id, struct udevice **devp)
 {
 	struct udevice *dev;
 
@@ -137,7 +137,7 @@ static void ap_init(unsigned int cpu_index)
 	enable_lapic();
 
 	apic_id = lapicid();
-	ret = find_cpu_by_apid_id(apic_id, &dev);
+	ret = find_cpu_by_apic_id(apic_id, &dev);
 	if (ret) {
 		debug("Unknown CPU apic_id %x\n", apic_id);
 		goto done;
@@ -432,7 +432,7 @@ static int init_bsp(struct udevice **devp)
 	lapic_setup();
 
 	apic_id = lapicid();
-	ret = find_cpu_by_apid_id(apic_id, devp);
+	ret = find_cpu_by_apic_id(apic_id, devp);
 	if (ret) {
 		printf("Cannot find boot CPU, APIC ID %d\n", apic_id);
 		return ret;
Signature · 1 line
1.9.1
author
#12 lore raw

PATCH v4 4/8 x86: use actual CPU number for allocating memory

In reply to Miao Yan

Use actual CPU number, instead of maximum cpu configured, to allocate stack memory in 'load_sipi_vector'

---
 arch/x86/cpu/mp_init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/cpu/mp_init.c +3 -3
index 2f34317..2a3ce48 100644
@@ -210,7 +210,7 @@ static int save_bsp_msrs(char *start, int size)
 	return msr_count;
 }
 
-static int load_sipi_vector(atomic_t **ap_countp)
+static int load_sipi_vector(atomic_t **ap_countp, int num_cpus)
 {
 	struct sipi_params_16bit *params16;
 	struct sipi_params *params;
@@ -239,7 +239,7 @@ static int load_sipi_vector(atomic_t **ap_countp)
 	params->idt_ptr = (uint32_t)x86_get_idt();
 
 	params->stack_size = CONFIG_AP_STACK_SIZE;
-	size = params->stack_size * CONFIG_MAX_CPUS;
+	size = params->stack_size * num_cpus;
 	stack = memalign(size, 4096);
 	if (!stack)
 		return -ENOMEM;
@@ -483,7 +483,7 @@ int mp_init(struct mp_params *p)
 	mp_info.records = p->flight_plan;
 
 	/* Load the SIPI vector */
-	ret = load_sipi_vector(&ap_count);
+	ret = load_sipi_vector(&ap_count, num_cpus);
 	if (ap_count == NULL)
 		return -1;
 
Signature · 1 line
1.9.1
#13 lore raw

PATCH v4 4/8 x86: use actual CPU number for allocating memory

Quoted 7 lines · Miao Yan

Use actual CPU number, instead of maximum cpu configured, to allocate stack memory in 'load_sipi_vector'

---
 arch/x86/cpu/mp_init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
author
#15 lore raw

PATCH v4 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()

In reply to Miao Yan

Add a function to fix up 'cpus' node in dts files for qemu target.

---
Changes in v4:
- fix a typo in commit log

 arch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++
 2 files changed, 76 insertions(+)
arch/x86/cpu/qemu/fw_cfg.c +65 -0
index 9de8680..5b1caa8 100644
@@ -9,6 +9,7 @@
 #include <errno.h>
 #include <malloc.h>
 #include <asm/io.h>
+#include <libfdt.h>
 #include "fw_cfg.h"
 
 static bool fwcfg_present;
@@ -103,6 +104,70 @@ int qemu_fwcfg_online_cpus(void)
 	return le16_to_cpu(nb_cpus);
 }
 
+void qemu_fwcfg_fdt_fixup(void *fdt_addr, int cpu_num)
+{
+	int i;
+	char cpus[10];
+	int off, err, sub_off, id;
+
+	off = fdt_path_offset(fdt_addr, "/cpus");
+	if (off != -FDT_ERR_NOTFOUND) {
+		printf("error detecting cpus subnode: %s (%d)\n",
+		       fdt_strerror(off), off);
+		return;
+	}
+
+	off = fdt_add_subnode(fdt_addr, 0, "cpus");
+	if (off < 0) {
+		printf("error adding cpus subnode: %s (%d)\n",
+		       fdt_strerror(off), off);
+		return;
+	}
+
+	for (i = cpu_num - 1; i >= 0; i--) {
+		sprintf(cpus, "%s@%d", "cpu", i);
+		sub_off = fdt_add_subnode(fdt_addr, off, cpus);
+		if (sub_off < 0) {
+			printf("error adding subnode cpu %d: %s (%d)\n",
+			       i, fdt_strerror(sub_off), sub_off);
+			return;
+		}
+
+		id = cpu_to_fdt32(i);
+		err = fdt_setprop(fdt_addr, sub_off, "intel,apic-id",
+				(void *)&id, sizeof(id));
+		if (err < 0) {
+			printf("error adding apic-id %d: %s (%d)\n",
+			       i, fdt_strerror(err), err);
+			return;
+		}
+
+		err = fdt_setprop(fdt_addr, sub_off, "reg",
+				(void *)&id, sizeof(id));
+		if (err < 0) {
+			printf("error adding reg %d: %s (%d)\n",
+			       i, fdt_strerror(err), err);
+			return;
+		}
+
+		err = fdt_setprop(fdt_addr, sub_off, "compatible",
+				"cpu-qemu", sizeof("cpu-qemu"));
+		if (err < 0) {
+			printf("error adding compatible %d: %s (%d)\n",
+			       i, fdt_strerror(err), err);
+			return;
+		}
+
+		err = fdt_setprop(fdt_addr, sub_off, "device_type",
+				"cpu", sizeof("cpu"));
+		if (err < 0) {
+			printf("error adding device_type %d: %s (%d)\n",
+			       i, fdt_strerror(err), err);
+			return;
+		}
+	}
+}
+
 static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
 {
 	char *data_addr;
arch/x86/cpu/qemu/fw_cfg.h +11 -0
index 03ac27d..f2c9221 100644
@@ -94,4 +94,15 @@ void qemu_fwcfg_init(void);
 
 int qemu_fwcfg_online_cpus(void);
 
+/**
+ * Fix 'cpu' node in device tree for qemu targets
+ *
+ * @fdt_addr: device tree blob address
+ * @cpu_num:  cpu number in system
+ *
+ * @return:   None
+ */
+
+void qemu_fwcfg_fdt_fixup(void *fdt_addr, int cpu_num);
+
 #endif
Signature · 1 line
1.9.1
#16 lore raw

PATCH v4 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()

Hi Maio,

Quoted 10 lines · Miao Yan

Add a function to fix up 'cpus' node in dts files for qemu target.

---
Changes in v4:
- fix a typo in commit log

 arch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++
 2 files changed, 76 insertions(+)

I'm sorry for not reviewing this earlier (Christmas and all that). I don't think you need to update the device tree to make this work.

Here's my suggestion:

- At present cpu_x86_bind() sets up the CPU APIC ID from the device tree
- You can bind new CPU devices in your code on start-up
- You can check if you have CPUs which are not available in the device list, by using uclass_find_first/next_device() to iterate through the devices without probing them
- Then to create a new one, call device_bind_driver() with the /cpus node as the parent
- After binding, update the parent platform data:

  struct cpu_platdata *plat = dev_get_parent_platdata(dev);

plat->cpu_id = ...

- Then when it comes to probing, you will have all the devices you need, and you don't need to adjust the device tree. The device tree can just hold a single device, for example.

I think it is better to do this than adjust the device tree because it removes the 32-CPU limit and should be faster. It is also simpler as it is a more direct method. Also I believe you only need to do this after relocation - e.g. in arch_early_init_r(), which is before mp_init() is called from cpu_init_r().

I wonder if there is a general way to probe available CPUs (and their APIC IDs)? Or is qemu the only 'CPU' with this feature?

Regards,
Simon

author
#17 lore raw

PATCH v4 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()

Hi Simon,

2015-12-31 13:08 GMT+08:00 Simon Glass <[email protected]>:

Quoted 10 lines

Hi Maio,

Quoted 7 lines · Miao Yan

Add a function to fix up 'cpus' node in dts files for qemu target.

---
Changes in v4:
- fix a typo in commit log

Quoted 8 lines
Quoted 3 lines
 arch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++
 2 files changed, 76 insertions(+)

I'm sorry for not reviewing this earlier (Christmas and all that). I don't think you need to update the device tree to make this work.

Here's my suggestion:

I am not familiar with driver model so I am not sure if I understand
you correctly. Are you suggesting something like the following:

+
+void create_cpu_node(void)
+{

+       int ret;
+       int cpu_online;
+       int cpu_num = 0;
+       struct udevice *dev;
+       struct cpu_platdata *plat;

+
+ for (uclass_find_first_device(UCLASS_CPU, &dev);
+ dev;
+ uclass_find_next_device(&dev)) {
+ cpu_num++;
+ }
+
+ cpu_online = qemu_fwcfg_online_cpus();
+ printf("%d cpus probed, %d cpus online\n", cpu_num, cpu_online);
+
+ for (dev = NULL; cpu_num < cpu_online; cpu_num++) {
+ ret = device_bind_driver(cpus_dev, "cpu_qemu", "cpu", &dev);
+ if (ret < 0) {
+ printf("device_bind_driver failed with code %d\n", ret);
+ return;

+               }
+               plat = dev_get_parent_platdata(dev);
+               plat->cpu_id = cpu_num;

+ }
+}

Quoted 8 lines

- At present cpu_x86_bind() sets up the CPU APIC ID from the device tree
- You can bind new CPU devices in your code on start-up
- You can check if you have CPUs which are not available in the device list, by using uclass_find_first/next_device() to iterate through the devices without probing them
- Then to create a new one, call device_bind_driver() with the /cpus node as the parent

The 'cpus' node is created in uclass_cpu_init(), and all the 'cpu' subnode are created by scanning device tree. But arch_early_init_r() is called before uclass_cpu_init(), so at that time, there's no 'cpus' yet.

Seems we need somewhere after uclass_cpu_init() but before mp_init() ? Or we entirely bypass the cpu uclass driver and create /cpus too ?

Quoted 10 lines

- After binding, update the parent platform data:

  struct cpu_platdata *plat = dev_get_parent_platdata(dev);
   plat->cpu_id = ...

- Then when it comes to probing, you will have all the devices you need, and you don't need to adjust the device tree. The device tree can just hold a single device, for example.

Quoted 5 lines

I think it is better to do this than adjust the device tree because it removes the 32-CPU limit and should be faster. It is also simpler as it is a more direct method. Also I believe you only need to do this after relocation - e.g. in arch_early_init_r(), which is before mp_init() is called from cpu_init_r().

Seems I can't do it in arch_early_init_r(), when 'cpus' is available yet.

Quoted 3 lines

I wonder if there is a general way to probe available CPUs (and their APIC IDs)? Or is qemu the only 'CPU' with this feature?

I am not sure about other x86 boards, but certainly fw_cfg is not the generic way. Maybe Bin can comment on this.

Quoted 3 lines

Regards,
Simon

#18 lore raw

PATCH v4 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()

Hi Miao,

Quoted 36 lines · Miao Yan

Hi Simon,

2015-12-31 13:08 GMT+08:00 Simon Glass <[email protected]>:

Quoted 10 lines

Hi Maio,

Quoted 7 lines · Miao Yan

Add a function to fix up 'cpus' node in dts files for qemu target.

---
Changes in v4:
- fix a typo in commit log

Quoted 8 lines
Quoted 3 lines
 arch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++
 2 files changed, 76 insertions(+)

I'm sorry for not reviewing this earlier (Christmas and all that). I don't think you need to update the device tree to make this work.

Here's my suggestion:

I am not familiar with driver model so I am not sure if I understand
you correctly. Are you suggesting something like the following:

(quoted diff) +10 -0
+
+void create_cpu_node(void)
+{
+       int ret;
+       int cpu_online;
+       int cpu_num = 0;
+       struct udevice *dev;
+       struct cpu_platdata *plat;
+
+       for (uclass_find_first_device(UCLASS_CPU, &dev);

Review

Quoted 10 lines
(quoted diff) +10 -0
+            dev;
+            uclass_find_next_device(&dev)) {
+               cpu_num++;
+       }
+
+       cpu_online = qemu_fwcfg_online_cpus();
+       printf("%d cpus probed, %d cpus online\n", cpu_num, cpu_online);
+
+       for (dev = NULL; cpu_num < cpu_online; cpu_num++) {
+               ret = device_bind_driver(cpus_dev, "cpu_qemu", "cpu", &dev);

Use sprintf() to give it a better name (e.g. cpu at 2)

Review

Quoted 3 lines
(quoted diff) +3 -0
+               if (ret < 0) {
+                       printf("device_bind_driver failed with code %d\n", ret);
+                       return;

return ret

arch/x86/cpu/qemu/fw_cfg.c int qemu_fwcfg_online_cpus(void) · line 134

Quoted 5 lines
arch/x86/cpu/qemu/fw_cfg.c +5 -0
+               }
+               plat = dev_get_parent_platdata(dev);
+               plat->cpu_id = cpu_num;
+       }
+}

Yes that looks right.

Quoted 12 lines
Quoted 11 lines

- At present cpu_x86_bind() sets up the CPU APIC ID from the device tree
- You can bind new CPU devices in your code on start-up
- You can check if you have CPUs which are not available in the device list, by using uclass_find_first/next_device() to iterate through the devices without probing them
- Then to create a new one, call device_bind_driver() with the /cpus node as the parent

Quoted 7 lines

The 'cpus' node is created in uclass_cpu_init(), and all the 'cpu' subnode are created by scanning device tree. But arch_early_init_r() is called before uclass_cpu_init(), so at that time, there's no 'cpus' yet.

Seems we need somewhere after uclass_cpu_init() but before mp_init() ? Or we entirely bypass the cpu uclass driver and create /cpus too ?

Can't you leave the 'cpus' node in the device tree? It can be empty if you like.

Quoted 18 lines
Quoted 12 lines

- After binding, update the parent platform data:

  struct cpu_platdata *plat = dev_get_parent_platdata(dev);
   plat->cpu_id = ...

- Then when it comes to probing, you will have all the devices you need, and you don't need to adjust the device tree. The device tree can just hold a single device, for example.

Quoted 5 lines

I think it is better to do this than adjust the device tree because it removes the 32-CPU limit and should be faster. It is also simpler as it is a more direct method. Also I believe you only need to do this after relocation - e.g. in arch_early_init_r(), which is before mp_init() is called from cpu_init_r().

Quoted 8 lines

Seems I can't do it in arch_early_init_r(), when 'cpus' is available yet.

Quoted 3 lines

I wonder if there is a general way to probe available CPUs (and their APIC IDs)? Or is qemu the only 'CPU' with this feature?

I am not sure about other x86 boards, but certainly fw_cfg is not the generic way. Maybe Bin can comment on this.

Regards,
Simon

#19 lore raw

PATCH v4 5/8 x86: qemu: add qemu_fwcfg_fdt_fixup()

In reply to Miao Yan
Quoted 91 lines · Miao Yan

Hi Simon,

2015-12-31 13:08 GMT+08:00 Simon Glass <[email protected]>:

Quoted 10 lines

Hi Maio,

Quoted 7 lines · Miao Yan

Add a function to fix up 'cpus' node in dts files for qemu target.

---
Changes in v4:
- fix a typo in commit log

Quoted 8 lines
Quoted 3 lines
 arch/x86/cpu/qemu/fw_cfg.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h | 11 ++++++++
 2 files changed, 76 insertions(+)

I'm sorry for not reviewing this earlier (Christmas and all that). I don't think you need to update the device tree to make this work.

Here's my suggestion:

I am not familiar with driver model so I am not sure if I understand
you correctly. Are you suggesting something like the following:

(quoted diff) +28 -0
+
+void create_cpu_node(void)
+{
+       int ret;
+       int cpu_online;
+       int cpu_num = 0;
+       struct udevice *dev;
+       struct cpu_platdata *plat;
+
+       for (uclass_find_first_device(UCLASS_CPU, &dev);
+            dev;
+            uclass_find_next_device(&dev)) {
+               cpu_num++;
+       }
+
+       cpu_online = qemu_fwcfg_online_cpus();
+       printf("%d cpus probed, %d cpus online\n", cpu_num, cpu_online);
+
+       for (dev = NULL; cpu_num < cpu_online; cpu_num++) {
+               ret = device_bind_driver(cpus_dev, "cpu_qemu", "cpu", &dev);
+               if (ret < 0) {
+                       printf("device_bind_driver failed with code %d\n", ret);
+                       return;
+               }
+               plat = dev_get_parent_platdata(dev);
+               plat->cpu_id = cpu_num;
+       }
+}
Quoted 11 lines

- At present cpu_x86_bind() sets up the CPU APIC ID from the device tree
- You can bind new CPU devices in your code on start-up
- You can check if you have CPUs which are not available in the device list, by using uclass_find_first/next_device() to iterate through the devices without probing them
- Then to create a new one, call device_bind_driver() with the /cpus node as the parent

The 'cpus' node is created in uclass_cpu_init(), and all the 'cpu' subnode are created by scanning device tree. But arch_early_init_r() is called before uclass_cpu_init(), so at that time, there's no 'cpus' yet.

Seems we need somewhere after uclass_cpu_init() but before mp_init() ? Or we entirely bypass the cpu uclass driver and create /cpus too ?

Quoted 10 lines

- After binding, update the parent platform data:

  struct cpu_platdata *plat = dev_get_parent_platdata(dev);
   plat->cpu_id = ...

- Then when it comes to probing, you will have all the devices you need, and you don't need to adjust the device tree. The device tree can just hold a single device, for example.

Quoted 5 lines

I think it is better to do this than adjust the device tree because it removes the 32-CPU limit and should be faster. It is also simpler as it is a more direct method. Also I believe you only need to do this after relocation - e.g. in arch_early_init_r(), which is before mp_init() is called from cpu_init_r().

Quoted 9 lines

Seems I can't do it in arch_early_init_r(), when 'cpus' is available yet.

Quoted 3 lines

I wonder if there is a general way to probe available CPUs (and their APIC IDs)? Or is qemu the only 'CPU' with this feature?

I am not sure about other x86 boards, but certainly fw_cfg is not the generic way. Maybe Bin can comment on this.

There is one generic way of probing available CPUs using 'cpuid' instruction that we may add this support to U-Boot in the future. But I doubt QEMU creates correct and consistent 'cpuid' results when invoked via '-smp n' or even 'cpus=<a>,cores=<b>,threads=<c>,sockets=<d>'. This needs to be double checked and tested with various command line parameters passed to QEMU.

Regards,
Bin

author
#20 lore raw

PATCH v4 6/8 x86: qemu: fix up cpu node in device tree

In reply to Miao Yan

Remove 'cpus' node in dts files for QEMU targets, retrieve cpu number through 'fw_cfg' interface and fix up device tree blob at runtime.

---
 arch/x86/cpu/qemu/qemu.c         |  4 ++++
 arch/x86/dts/qemu-x86_i440fx.dts | 19 +------------------
 arch/x86/dts/qemu-x86_q35.dts    | 19 +------------------
 3 files changed, 6 insertions(+), 36 deletions(-)
arch/x86/cpu/qemu/qemu.c +4 -0
index d9ae066..3be3af0 100644
@@ -15,6 +15,8 @@
 
 static bool i440fx;
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static void qemu_chipset_init(void)
 {
 	u16 device, xbcs;
@@ -93,6 +95,8 @@ int arch_early_init_r(void)
 {
 	qemu_chipset_init();
 
+	qemu_fwcfg_fdt_fixup((void *)gd->fdt_blob, qemu_fwcfg_online_cpus());
+
 	return 0;
 }
 
arch/x86/dts/qemu-x86_i440fx.dts +1 -18
index 4332204..79bafbd 100644
@@ -26,24 +26,7 @@
 		stdout-path = "/serial";
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu at 0 {
-			device_type = "cpu";
-			compatible = "cpu-qemu";
-			reg = <0>;
-			intel,apic-id = <0>;
-		};
-
-		cpu at 1 {
-			device_type = "cpu";
-			compatible = "cpu-qemu";
-			reg = <1>;
-			intel,apic-id = <1>;
-		};
-	};
+	/* cpu node will be dynamically filled by U-Boot */
 
 	tsc-timer {
 		clock-frequency = <1000000000>;
arch/x86/dts/qemu-x86_q35.dts +1 -18
index 3e2cfac..9563344 100644
@@ -37,24 +37,7 @@
 		stdout-path = "/serial";
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu at 0 {
-			device_type = "cpu";
-			compatible = "cpu-qemu";
-			reg = <0>;
-			intel,apic-id = <0>;
-		};
-
-		cpu at 1 {
-			device_type = "cpu";
-			compatible = "cpu-qemu";
-			reg = <1>;
-			intel,apic-id = <1>;
-		};
-	};
+	/* cpu node will be dynamically filled by U-Boot */
 
 	tsc-timer {
 		clock-frequency = <1000000000>;
Signature · 1 line
1.9.1
author
#21 lore raw

PATCH v4 7/8 x86: qemu: adjust ramdisk load address

In reply to Miao Yan

By default, ramdisk load address is defined to 02000000 in env string. When loading bzImage to 100000 (default address), there's a chance that the ramdisk header would be overwritten by the kernel. Thus increase the gap and make ramdisk load at 04000000 by default.

---
 include/configs/qemu-x86.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)
include/configs/qemu-x86.h +13 -0
index 4258dcb..657b8af 100644
@@ -57,4 +57,17 @@
 #undef CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_IS_NOWHERE
 
+/* default ramdisk load address */
+#define CONFIG_RAMDISK_ADDR	0x04000000
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS			\
+	CONFIG_STD_DEVICES_SETTINGS			\
+	"pciconfighost=1\0"				\
+	"netdev=eth0\0"					\
+	"consoledev=ttyS0\0"				\
+	"othbootargs=acpi=off\0"			\
+	"ramdiskaddr=0x4000000\0"			\
+	"ramdiskfile=initramfs.gz\0"
+
 #endif	/* __CONFIG_H */
Signature · 1 line
1.9.1
#22 lore raw

PATCH v4 7/8 x86: qemu: adjust ramdisk load address

Hi Miao,

Quoted 10 lines · Miao Yan

By default, ramdisk load address is defined to 02000000 in env string. When loading bzImage to 100000 (default address), there's a chance that the ramdisk header would be overwritten by the kernel. Thus increase the gap and make ramdisk load at 04000000 by default.

---
 include/configs/qemu-x86.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

But you add other env options here to. Can you mention more of these in the commit message too?

Quoted 24 lines
include/configs/qemu-x86.h +13 -1
index 4258dcb..657b8af 100644
@@ -57,4 +57,17 @@
 #undef CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_IS_NOWHERE
 
+/* default ramdisk load address */
+#define CONFIG_RAMDISK_ADDR    0x04000000
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS                      \
+       CONFIG_STD_DEVICES_SETTINGS                     \
+       "pciconfighost=1\0"                             \
+       "netdev=eth0\0"                                 \
+       "consoledev=ttyS0\0"                            \
+       "othbootargs=acpi=off\0"                        \
+       "ramdiskaddr=0x4000000\0"                       \
+       "ramdiskfile=initramfs.gz\0"
+
 #endif /* __CONFIG_H */
--
Quoted 2 lines

1.9.1

Regards,
Simon

#23 lore raw

PATCH v4 7/8 x86: qemu: adjust ramdisk load address

In reply to Miao Yan

Hi Miao,

Quoted 2 lines · Miao Yan

By default, ramdisk load address is defined to 02000000 in env string. When loading bzImage to 100000 (default address), there's

The default load address is 1000000 (16MB). See CONFIG_LOADADDR in x86-common.h

Quoted 20 lines

a chance that the ramdisk header would be overwritten by the kernel. Thus increase the gap and make ramdisk load at 04000000 by default.

---
 include/configs/qemu-x86.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)
include/configs/qemu-x86.h +3 -0
index 4258dcb..657b8af 100644
@@ -57,4 +57,17 @@
 #undef CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_IS_NOWHERE
 
+/* default ramdisk load address */
+#define CONFIG_RAMDISK_ADDR    0x04000000
+

include/configs/qemu-x86.h line 72

Quoted 10 lines
include/configs/qemu-x86.h +10 -0
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS                      \
+       CONFIG_STD_DEVICES_SETTINGS                     \
+       "pciconfighost=1\0"                             \
+       "netdev=eth0\0"                                 \
+       "consoledev=ttyS0\0"                            \
+       "othbootargs=acpi=off\0"                        \
+       "ramdiskaddr=0x4000000\0"                       \
+       "ramdiskfile=initramfs.gz\0"
+

Please move the changes to x86-common.h. This can be generic for all x86 targets.

include/configs/qemu-x86.h

Quoted 2 lines
include/configs/qemu-x86.h +0 -1
 #endif /* __CONFIG_H */
--

Regards,
Bin

author
#24 lore raw

PATCH v4 8/8 x86: qemu: add documentaion for the fw_cfg interface

In reply to Miao Yan

Document the usage of 'fw' command

---
Changes in v4:
- limit maximum supported cpu number to 32

 doc/README.x86 | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)
doc/README.x86 +32 -3
index 1271e5e..aa3010d 100644
@@ -295,9 +295,38 @@ show QEMU's VGA console window. Note this will disable QEMU's serial output.
 If you want to check both consoles, use '-serial stdio'.
 
 Multicore is also supported by QEMU via '-smp n' where n is the number of cores
-to instantiate. Currently the default U-Boot built for QEMU supports 2 cores.
-In order to support more cores, you need add additional cpu nodes in the device
-tree and change CONFIG_MAX_CPUS accordingly.
+to instantiate. Note, due space limitations in dtb, the maximum supported CPU
+number is 32.
+
+The fw_cfg interface in QEMU also provides information about kernel data, initrd
+,command-line arguments and more. U-Boot supports directly accessing these informtion
+from fw_cfg interface, this saves the time of loading them from hard disk or
+network again, through emulated devices. To use it , simply providing them in
+QEMU command line:
+
+$ qemu-system-i386 -nographic -bios path/to/u-boot.rom -m 1024 -kernel /path/to/bzImage
+    -append 'root=/dev/ram console=ttyS0' -initrd /path/to/initrd -smp 8
+
+Note: -initrd and -smp are both optional
+
+Then start QEMU, in U-Boot command line use the following U-Boot command to setup kernel:
+
+ => fw
+fw - QEMU firmware interface
+
+Usage:
+fw <command>
+    - list                             : print firmware(s) currently loaded
+    - cpus                             : print online cpu number
+    - load <kernel addr> <initrd addr> : load kernel and initrd (if any) and setup for zboot
+
+=> fw load
+loading kernel to address 02000000 initrd 04000000, size 0x1b1ab50
+
+Here the kernel (bzImage) is loaded to 02000000 and initrd is to 0x04000000. Then, 'zboot'
+can be used to boot the kernel:
+
+=> zboot 02000000 - 04000000 1b1ab50
 
 CPU Microcode
 -------------
Signature · 1 line
1.9.1
#25 lore raw

PATCH v4 8/8 x86: qemu: add documentaion for the fw_cfg interface

Hi Miao,

Quoted 15 lines · Miao Yan

Document the usage of 'fw' command

---
Changes in v4:
- limit maximum supported cpu number to 32

 doc/README.x86 | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)
doc/README.x86 +0 -0
index 1271e5e..aa3010d 100644

doc/README.x86 show QEMU's VGA console window. Note this will disable QEMU's serial output. · line 300

Quoted 6 lines
doc/README.x86 +0 -3
@@ -295,9 +295,38 @@ show QEMU's VGA console window. Note this will disable QEMU's serial output.
 If you want to check both consoles, use '-serial stdio'.
 
 Multicore is also supported by QEMU via '-smp n' where n is the number of cores
-to instantiate. Currently the default U-Boot built for QEMU supports 2 cores.
-In order to support more cores, you need add additional cpu nodes in the device
-tree and change CONFIG_MAX_CPUS accordingly.

This is a little unclear, because it seems like your code actually fixes this by automatically supporting more CPUs.

Quoted 36 lines
doc/README.x86 +32 -1
+to instantiate. Note, due space limitations in dtb, the maximum supported CPU
+number is 32.
+
+The fw_cfg interface in QEMU also provides information about kernel data, initrd
+,command-line arguments and more. U-Boot supports directly accessing these informtion
+from fw_cfg interface, this saves the time of loading them from hard disk or
+network again, through emulated devices. To use it , simply providing them in
+QEMU command line:
+
+$ qemu-system-i386 -nographic -bios path/to/u-boot.rom -m 1024 -kernel /path/to/bzImage
+    -append 'root=/dev/ram console=ttyS0' -initrd /path/to/initrd -smp 8
+
+Note: -initrd and -smp are both optional
+
+Then start QEMU, in U-Boot command line use the following U-Boot command to setup kernel:
+
+ => fw
+fw - QEMU firmware interface
+
+Usage:
+fw <command>
+    - list                             : print firmware(s) currently loaded
+    - cpus                             : print online cpu number
+    - load <kernel addr> <initrd addr> : load kernel and initrd (if any) and setup for zboot
+
+=> fw load
+loading kernel to address 02000000 initrd 04000000, size 0x1b1ab50
+
+Here the kernel (bzImage) is loaded to 02000000 and initrd is to 0x04000000. Then, 'zboot'
+can be used to boot the kernel:
+
+=> zboot 02000000 - 04000000 1b1ab50
 
 CPU Microcode
 -------------
--
Quoted 2 lines

1.9.1

Great documentation!

Regards,
Simon

#26 lore raw

PATCH v4 8/8 x86: qemu: add documentaion for the fw_cfg interface

In reply to Miao Yan

Hi Miao,

Quoted 16 lines · Miao Yan

Document the usage of 'fw' command

---
Changes in v4:
- limit maximum supported cpu number to 32

 doc/README.x86 | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)
doc/README.x86 +0 -0
index 1271e5e..aa3010d 100644
@@ -295,9 +295,38 @@ show QEMU's VGA console window. Note this will disable QEMU's serial output.
 If you want to check both consoles, use '-serial stdio'.

doc/README.x86 show QEMU's VGA console window. Note this will disable QEMU's serial output. · line 302

Quoted 10 lines
doc/README.x86 +5 -3
 
 Multicore is also supported by QEMU via '-smp n' where n is the number of cores
-to instantiate. Currently the default U-Boot built for QEMU supports 2 cores.
-In order to support more cores, you need add additional cpu nodes in the device
-tree and change CONFIG_MAX_CPUS accordingly.
+to instantiate. Note, due space limitations in dtb, the maximum supported CPU
+number is 32.
+
+The fw_cfg interface in QEMU also provides information about kernel data, initrd
+,command-line arguments and more. U-Boot supports directly accessing these informtion

Please move the ',' to the end of the line above

Quoted 12 lines
doc/README.x86 +12 -0
+from fw_cfg interface, this saves the time of loading them from hard disk or
+network again, through emulated devices. To use it , simply providing them in
+QEMU command line:
+
+$ qemu-system-i386 -nographic -bios path/to/u-boot.rom -m 1024 -kernel /path/to/bzImage
+    -append 'root=/dev/ram console=ttyS0' -initrd /path/to/initrd -smp 8
+
+Note: -initrd and -smp are both optional
+
+Then start QEMU, in U-Boot command line use the following U-Boot command to setup kernel:
+
+ => fw

doc/README.x86 show QEMU's VGA console window. Note this will disable QEMU's serial output. · line 324

Quoted 10 lines
doc/README.x86 +10 -0
+fw - QEMU firmware interface
+
+Usage:
+fw <command>
+    - list                             : print firmware(s) currently loaded
+    - cpus                             : print online cpu number
+    - load <kernel addr> <initrd addr> : load kernel and initrd (if any) and setup for zboot
+
+=> fw load
+loading kernel to address 02000000 initrd 04000000, size 0x1b1ab50

This 'size' looks confusing as it is unclear which size is this for. So we may need enhance 'fw load' to print kernel size as well, something like:

loading kernel to address 02000000 size xxxxxxxx, initrd 04000000 size xxxxxxxx. Note you can omit 0x in the size to keep consitency.

Quoted 11 lines
doc/README.x86 +5 -1
+
+Here the kernel (bzImage) is loaded to 02000000 and initrd is to 0x04000000. Then, 'zboot'
+can be used to boot the kernel:
+
+=> zboot 02000000 - 04000000 1b1ab50
 
 CPU Microcode
 -------------
--

1.9.1

#27 lore raw

v4 cover x86: qemu: add fw_cfg interface support for qemu-x86 targets

In reply to Miao Yan

Hi Miao,

Quoted 53 lines · Miao Yan

The fw_cfg interface provided by QEMU allow guests to retrieve various information about the system, e.g. cpu number, variaous firmware data, kernel setup, etc. The fw_cfg interface can be accessed through 3 IO ports (on x86), using x86 in/out instructions.

- 0x510: select configuration items to access
- 0x511: reading this port will return data selected in 0x510
- 0x514: this can be used to detect if DMA interface is available

If fw_cfg DMA interface is available, it can be used to accelerate accesses.

This patchset adds the following supports for qemu-x86 targets:

+ the fw_cfg driver itself

+ add a U-Boot command 'fw' to support direct accessing kernel informtion from fw_cfg interface, this saves the time of loading them from hard disk or network again, through emulated devices.

+ use fw_cfg to get cpu number at runtime, so smp boot no longer relies on the cpu node hard-coded in dts files.

Changes in v4:
- drop [PATCH v3 7/8] and limit maximum supported cpu number
- chance 'fw load' to take second parameter for initrd load address
- change default initrd load address for qemu-x86

Miao Yan (8):
x86: qemu: add fw_cfg support
x86: qemu: add a cpu uclass driver for qemu target
x86: fix a typo in function name
x86: use actual CPU number for allocating memory
x86: qemu: add qemu_fwcfg_fdt_fixup()
x86: qemu: fix up cpu node in device tree
x86: qemu: adjust ramdisk load address
x86: qemu: add documentaion for the fw_cfg interface

 arch/x86/cpu/mp_init.c           |  12 +-
 arch/x86/cpu/qemu/Makefile       |   2 +-
 arch/x86/cpu/qemu/cpu.c          |  57 +++++++
 arch/x86/cpu/qemu/fw_cfg.c       | 333 +++++++++++++++++++++++++++++++++++++++
 arch/x86/cpu/qemu/fw_cfg.h       | 108 +++++++++++++
 arch/x86/cpu/qemu/qemu.c         |   7 +
 arch/x86/dts/qemu-x86_i440fx.dts |  19 +--
 arch/x86/dts/qemu-x86_q35.dts    |  19 +--
 doc/README.x86                   |  35 +++-
 include/configs/qemu-x86.h       |  13 ++
 10 files changed, 559 insertions(+), 46 deletions(-)
 create mode 100644 arch/x86/cpu/qemu/cpu.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.c
 create mode 100644 arch/x86/cpu/qemu/fw_cfg.h
Quoted 1 line

--

Please add those git tags (eg: Reviewed-by, Tested-By, Acked-by) when you rework your patch series. This helps future reviews of the same patch series.

Regards,
Bin