Add Support for Hi6220 PMIC Hi6553 MFD Core
Subsystems (4)
v7 cover Add Support for Hi6220 PMIC Hi6553 MFD Core
The patch sets add support for Hi6220 PMIC Hi655x MFD core and its regulator driver.
Current testing and support board is Hikey which is one of 96boards. It is an arm64 open source board. For more information about this board, please access https://www.96boards.org.
This is hardware layout for access PMIC Hi655x from AP SoC Hi6220. Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. We can use memory-mapped I/O to communicate.
+----------------+ +-------------+ | | | | | Hi6220 | SSI bus | Hi655x | | |-------------| | | |(REGMAP_MMIO)| | +----------------+ +-------------+
V2: Code refactoring of regulator.
V3: Drop mtcmos from this patch and use regmap-irq.
V4: Move the vset-table to driver code and donot open code for it.
V5: Use regulators_node and of_match, donot open code fot it.
V7: Change the constraints into hikey.dts and fix code in PMIC.
V7 RESEND: Resend these patch sets for error git email.
Chen Feng (5):
mfd: hi655x: Add document for mfd hi665x PMIC
regulator: hi655x: Document for hi655x regulator
mfd: hi655x: Add MFD driver for hi655x
regulator: hi655x: enable regulator for hi655x PMIC
arm64: dts: hisilicon: Add hi655x pmic dts node
.../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 +++ .../regulator/hisilicon,hi655x-regulator.txt | 28 +++ arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++ drivers/mfd/Kconfig | 10 + drivers/mfd/Makefile | 1 + drivers/mfd/hi655x-pmic.c | 162 +++++++++++++++ drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/hi655x-regulator.c | 228 +++++++++++++++++++++ include/linux/mfd/hi655x-pmic.h | 55 +++++ 10 files changed, 607 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt create mode 100644 drivers/mfd/hi655x-pmic.c create mode 100644 drivers/regulator/hi655x-regulator.c create mode 100644 include/linux/mfd/hi655x-pmic.h
Signature · 1 line
1.9.1
PATCH RESEND v7 1/5 mfd: hi655x: Add document for mfd hi665x PMIC
DT bindings for hisilicon hi655x MFD PMIC chip.
--- .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +27 -0
@@ -0,0 +1,27 @@ +Hisilicon hi655x Power Management Integrated Circuit (PMIC) + +The hardware layout for access PMIC Hi655x from AP SoC Hi6220. +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. +We can use memory-mapped I/O to communicate. + ++----------------+ +-------------+ +| | | | +| Hi6220 | SSI bus | Hi655x | +| |-------------| | +| |(REGMAP_MMIO)| | ++----------------+ +-------------+ + +Required properties: +- compatible: Should be "hisilicon,hi655x-pmic" +- reg: Base address of PMIC on hi6220 soc +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain). +- pmic-gpios: The gpio used by PMIC irq. + +Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }
Signature · 1 line
1.9.1
Re: [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC
Quoted 23 lines · Chen Feng
DT bindings for hisilicon hi655x MFD PMIC chip.
Signed-off-by Chen Feng <[email protected]>Signed-off-by Fei Wang <[email protected]>Signed-off-by Xinwei Kong <[email protected]>Reviewed-by Haojian Zhuang <[email protected]>--- .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txtDocumentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +6
-0@@ -0,0 +1,27 @@ +Hisilicon hi655x Power Management Integrated Circuit (PMIC) + +The hardware layout for access PMIC Hi655x from AP SoC Hi6220. +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. +We can use memory-mapped I/O to communicate. +
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 16
Quoted 10 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +10
-0++----------------+ +-------------+ +| | | | +| Hi6220 | SSI bus | Hi655x | +| |-------------| | +| |(REGMAP_MMIO)| | ++----------------+ +-------------+ + +Required properties: +- compatible: Should be "hisilicon,hi655x-pmic" +- reg: Base address of PMIC on hi6220 soc
s/hi6220 soc/Hi6220 SoC/
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 18
Quoted 2 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +2
-0+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain). +- pmic-gpios: The gpio used by PMIC irq.
s/gpio/GPIO/
s/irq/IRQ/
These are always easier to read in this format:
- compatible: Should be "hisilicon,hi655x-pmic"
- reg: Base address of PMIC on hi6220 soc
- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
- pmic-gpios: The gpio used by PMIC irq.
Quoted 8 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +8
-0+Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Re: [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC
Thanks for your review.
Quoted 38 lines · Lee Jones
Quoted 23 lines · Chen Feng
DT bindings for hisilicon hi655x MFD PMIC chip.
Signed-off-by Chen Feng <[email protected]>Signed-off-by Fei Wang <[email protected]>Signed-off-by Xinwei Kong <[email protected]>Reviewed-by Haojian Zhuang <[email protected]>--- .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txtDocumentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +6
-0@@ -0,0 +1,27 @@ +Hisilicon hi655x Power Management Integrated Circuit (PMIC) + +The hardware layout for access PMIC Hi655x from AP SoC Hi6220. +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. +We can use memory-mapped I/O to communicate. +Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 16
Quoted 10 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +10
-0++----------------+ +-------------+ +| | | | +| Hi6220 | SSI bus | Hi655x | +| |-------------| | +| |(REGMAP_MMIO)| | ++----------------+ +-------------+ + +Required properties: +- compatible: Should be "hisilicon,hi655x-pmic" +- reg: Base address of PMIC on hi6220 socs/hi6220 soc/Hi6220 SoC/
Quoted 6 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 18
Quoted 2 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +2
-0+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain). +- pmic-gpios: The gpio used by PMIC irq.s/gpio/GPIO/
s/irq/IRQ/
I will change this and send a new V8 version.
Quoted 16 lines
These are always easier to read in this format:
- compatible: Should be "hisilicon,hi655x-pmic"
- reg: Base address of PMIC on hi6220 soc
- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
- pmic-gpios: The gpio used by PMIC irq.Quoted 8 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +8
-0+Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }
PATCH RESEND v7 2/5 regulator: hi655x: Document for hi655x regulator
In reply to Chen FengThis patch adds the device tree binding documentation for hi655x PMIC regulator.
--- .../regulator/hisilicon,hi655x-regulator.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt new file +28 -0
@@ -0,0 +1,28 @@ +Hisilicon Hi655x Voltage regulators + +Note: +The hi655x regulator control is managed by hi655x Power IC. +So the node of this regulator must be child node of hi655x +PMIC node. + +The driver uses the regulator core framework, so please also +take the bindings of regulator.txt for reference. + +The valid names for regulators are: + +LDO2 LDO7 LDO10 LDO13 LDO14 LDO15 LDO17 LDO19 LDO21 LDO22 + +Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + ... + regulators { + ldo2: LDO2@a21 { + regulator-compatible = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + ... + } + }
Signature · 1 line
1.9.1
PATCH RESEND v7 3/5 mfd: hi655x: Add MFD driver for hi655x
In reply to Chen FengAdd PMIC MFD driver to support hisilicon hi665x.
--- drivers/mfd/Kconfig | 10 +++ drivers/mfd/Makefile | 1 + drivers/mfd/hi655x-pmic.c | 162 ++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/hi655x-pmic.h | 55 ++++++++++++++ 4 files changed, 228 insertions(+) create mode 100644 drivers/mfd/hi655x-pmic.c create mode 100644 include/linux/mfd/hi655x-pmic.h
drivers/mfd/Kconfig +10 -0
@@ -284,6 +284,16 @@ config MFD_HI6421_PMIC menus in order to enable them. We communicate with the Hi6421 via memory-mapped I/O. +config MFD_HI655X_PMIC + tristate "HiSilicon Hi655X series PMU/Codec IC" + depends on ARCH_HISI || COMPILE_TEST + depends on OF + select MFD_CORE + select REGMAP_MMIO + select REGMAP_IRQ + help + Select this option to enable Hisilicon hi655x series pmic driver. + config HTC_EGPIO bool "HTC EGPIO support" depends on GPIOLIB && ARM
drivers/mfd/Makefile +1 -0
@@ -190,6 +190,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o +obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o obj-$(CONFIG_MFD_DLN2) += dln2.o obj-$(CONFIG_MFD_RT5033) += rt5033.o obj-$(CONFIG_MFD_SKY81452) += sky81452.o
drivers/mfd/hi655x-pmic.c new file +162 -0
162 lines not on this page · raw message
include/linux/mfd/hi655x-pmic.h new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
1.9.1
Re: [RESEND v7 3/5] mfd: hi655x: Add MFD driver for hi655x
Quoted 6 lines · Chen Feng
Add PMIC MFD driver to support hisilicon hi665x.
Signed-off-by Chen Feng <[email protected]>Signed-off-by Fei Wang <[email protected]>Signed-off-by Xinwei Kong <[email protected]>Reviewed-by Haojian Zhuang <[email protected]>
Quoted 8 lines
--- drivers/mfd/Kconfig | 10 +++ drivers/mfd/Makefile | 1 + drivers/mfd/hi655x-pmic.c | 162 ++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/hi655x-pmic.h | 55 ++++++++++++++ 4 files changed, 228 insertions(+) create mode 100644 drivers/mfd/hi655x-pmic.c create mode 100644 include/linux/mfd/hi655x-pmic.h
Quoted 262 lines
drivers/mfd/Kconfig +10
-0@@ -284,6 +284,16 @@ config MFD_HI6421_PMIC menus in order to enable them. We communicate with the Hi6421 via memory-mapped I/O. +config MFD_HI655X_PMIC + tristate "HiSilicon Hi655X series PMU/Codec IC" + depends on ARCH_HISI || COMPILE_TEST + depends on OF + select MFD_CORE + select REGMAP_MMIO + select REGMAP_IRQ + help + Select this option to enable Hisilicon hi655x series pmic driver. + config HTC_EGPIO bool "HTC EGPIO support" depends on GPIOLIB && ARMdrivers/mfd/Makefile +1
-0@@ -190,6 +190,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o +obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o obj-$(CONFIG_MFD_DLN2) += dln2.o obj-$(CONFIG_MFD_RT5033) += rt5033.o obj-$(CONFIG_MFD_SKY81452) += sky81452.odrivers/mfd/hi655x-pmic.c new file +162
-0@@ -0,0 +1,162 @@ +/* +* Device driver for MFD hi655x PMIC +* +* Copyright (c) 2016 Hisilicon. +* +* Authors: +* Chen Feng <[email protected]> +* Fei Wang <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/mfd/core.h> +#include <linux/mfd/hi655x-pmic.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +static const struct mfd_cell hi655x_pmic_devs[] = { + { .name ="hi655x-regulator" , }, +}; + +static const struct regmap_irq hi655x_irqs[] = { + { .reg_offset =0 , .mask =OTMP_D1R_INT }, + { .reg_offset =0 , .mask =VSYS_2P5_R_INT }, + { .reg_offset =0 , .mask =VSYS_UV_D3R_INT }, + { .reg_offset =0 , .mask =VSYS_6P0_D200UR_INT }, + { .reg_offset =0 , .mask =PWRON_D4SR_INT }, + { .reg_offset =0 , .mask =PWRON_D20F_INT }, + { .reg_offset =0 , .mask =PWRON_D20R_INT }, + { .reg_offset =0 , .mask =RESERVE_INT }, +}; + +static const struct regmap_irq_chip hi655x_irq_chip = { + .name ="hi655x-pmic" , + .irqs = hi655x_irqs, + .num_regs =1 , + .num_irqs =ARRAY_SIZE (hi655x_irqs), + .status_base =HI655X_IRQ_STAT_BASE , + .mask_base =HI655X_IRQ_MASK_BASE , +}; + +static struct regmap_config hi655x_regmap_config = { + .reg_bits =32 , + .reg_stride =HI655X_STRIDE , + .val_bits =8 , + .max_register =HI655X_BUS_ADDR (0xFFF ), +}; + +static void hi655x_local_irq_clear (struct regmap *map) +{ +int i; + +regmap_write (map,HI655X_ANA_IRQM_BASE ,HI655X_IRQ_CLR ); +for (i =0 ; i <HI655X_IRQ_ARRAY ; i++) { +regmap_write (map,HI655X_IRQ_STAT_BASE + i *HI655X_STRIDE , +HI655X_IRQ_CLR ); + } +} + +static int hi655x_pmic_probe (struct platform_device *pdev) +{ +int ret; +struct hi655x_pmic *pmic; +struct device *dev = &pdev->dev; +struct device_node *np = dev->of_node; +void __iomem *base; + + pmic =devm_kzalloc (dev,sizeof (*pmic),GFP_KERNEL ); +if (!pmic) +return -ENOMEM ; + pmic->dev = dev; + + pmic->res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!pmic->res) +return -ENOENT ; + + base =devm_ioremap_resource (dev, pmic->res); +if (!base) +return -ENOMEM ; + + pmic->regmap =devm_regmap_init_mmio_clk (dev,NULL , base, + &hi655x_regmap_config); + +regmap_read (pmic->regmap,HI655X_BUS_ADDR (HI655X_VER_REG ), &pmic->ver); +if ((pmic->ver <PMU_VER_START ) || (pmic->ver >PMU_VER_END )) { +dev_warn (dev,"PMU version %d unsupported\n" , pmic->ver); +return -EINVAL ; + } + +hi655x_local_irq_clear (pmic->regmap); + + pmic->gpio =of_get_named_gpio (np,"pmic-gpios" ,0 ); +if (!gpio_is_valid (pmic->gpio)) { +dev_err (dev,"Failed to get the pmic-gpios\n" ); +return -ENODEV ; + } + + ret =devm_gpio_request_one (dev, pmic->gpio,GPIOF_IN , +"hi655x_pmic_irq" ); +if (ret <0 ) { +dev_err (dev,"Failed to request gpio %d ret = %d\n" , + pmic->gpio, ret); +return ret; + } + + ret =regmap_add_irq_chip (pmic->regmap,gpio_to_irq (pmic->gpio), +IRQF_TRIGGER_LOW |IRQF_NO_SUSPEND ,0 , + &hi655x_irq_chip, &pmic->irq_data); +if (ret) { +dev_err (dev,"Failed to obtain 'hi655x_pmic_irq' %d\n" , ret); +return ret; + } + +platform_set_drvdata (pdev, pmic); + + ret =mfd_add_devices (dev,PLATFORM_DEVID_AUTO , hi655x_pmic_devs, +ARRAY_SIZE (hi655x_pmic_devs),NULL ,0 ,NULL ); +if (ret) { +dev_err (dev,"Failed to register device %d\n" , ret); +regmap_del_irq_chip (gpio_to_irq (pmic->gpio), pmic->irq_data); +return ret; + } + +return 0 ; +} + +static int hi655x_pmic_remove (struct platform_device *pdev) +{ +struct hi655x_pmic *pmic =platform_get_drvdata (pdev); + +regmap_del_irq_chip (gpio_to_irq (pmic->gpio), pmic->irq_data); +mfd_remove_devices (&pdev->dev); +return 0 ; +} + +static const struct of_device_id hi655x_pmic_match[] = { + { .compatible ="hisilicon,hi655x-pmic" , }, + {}, +}; + +static struct platform_driver hi655x_pmic_driver = { + .driver = { + .name ="hi655x-pmic" , + .of_match_table =of_match_ptr (hi655x_pmic_match), + }, + .probe = hi655x_pmic_probe, + .remove = hi655x_pmic_remove, +}; +module_platform_driver (hi655x_pmic_driver); + +MODULE_AUTHOR ("Chen Feng <[email protected]>" ); +MODULE_DESCRIPTION ("Hisilicon hi655x PMIC driver" ); +MODULE_LICENSE ("GPL v2" );include/linux/mfd/hi655x-pmic.h new file +55
-0@@ -0,0 +1,55 @@ +/* +* Device driver for regulators in hi655x IC +* +* Copyright (c) 2016 Hisilicon. +* +* Authors: +* Chen Feng <[email protected]> +* Fei Wang <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __HI655X_PMIC_H +#define __HI655X_PMIC_H + +/* Hi655x registers are mapped to memory bus in 4 bytes stride */ +#define HI655X_STRIDE 4 +#define HI655X_BUS_ADDR (x) ((x) << 2) + +#define HI655X_BITS 8 + +#define HI655X_NR_IRQ 32 + +#define HI655X_IRQ_STAT_BASE (0x003 << 2) +#define HI655X_IRQ_MASK_BASE (0x007 << 2) +#define HI655X_ANA_IRQM_BASE (0x1b5 << 2) +#define HI655X_IRQ_ARRAY 4 +#define HI655X_IRQ_MASK 0xFF +#define HI655X_IRQ_CLR 0xFF +#define HI655X_VER_REG 0x00 + +#define PMU_VER_START 0x10 +#define PMU_VER_END 0x38 + +#define RESERVE_INT BIT(7) +#define PWRON_D20R_INT BIT(6) +#define PWRON_D20F_INT BIT(5) +#define PWRON_D4SR_INT BIT(4) +#define VSYS_6P0_D200UR_INT BIT(3) +#define VSYS_UV_D3R_INT BIT(2) +#define VSYS_2P5_R_INT BIT(1) +#define OTMP_D1R_INT BIT(0) + +struct hi655x_pmic { +struct resource *res; +struct device *dev; +struct regmap *regmap; +int gpio; +unsigned int ver; +struct regmap_irq_chip_data *irq_data; +}; + +#endif
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
PATCH RESEND v7 4/5 regulator: hi655x: enable regulator for hi655x PMIC
In reply to Chen FengAdd the regulator driver for hi655x PMIC.
--- drivers/regulator/Kconfig | 8 ++ drivers/regulator/Makefile | 1 + drivers/regulator/hi655x-regulator.c | 228 +++++++++++++++++++++++++++++++++++ 3 files changed, 237 insertions(+) create mode 100644 drivers/regulator/hi655x-regulator.c
drivers/regulator/Kconfig +8 -0
@@ -261,6 +261,14 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_HI655X + tristate "Hisilicon HI655X PMIC regulators support" + depends on ARCH_HISI || COMPILE_TEST + depends on MFD_HI655X_PMIC && OF + help + This driver provides support for the voltage regulators of the + Hisilicon Hi655x PMIC device. + config REGULATOR_ISL9305 tristate "Intersil ISL9305 regulator" depends on I2C
drivers/regulator/Makefile +1 -0
@@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o +obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
drivers/regulator/hi655x-regulator.c new file +228 -0
228 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH RESEND v7 5/5 arm64: dts: hisilicon: Add hi655x pmic dts node
In reply to Chen FengAdd the mfd hi655x dts node and regulator support on hi6220 platform.
--- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++++++++++ 1 file changed, 87 insertions(+)
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +87 -0
@@ -6,6 +6,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> /*Reserved 1MB memory for MCU*/ /memreserve/ 0x05e00000 0x00100000;
@@ -31,6 +32,92 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + status = "okay"; + + regulators { + ldo2: LDO2@a21 { + regulator-name = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo7: LDO7@a26 { + regulator-name = "LDO7_SDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo10: LDO10@a29 { + regulator-name = "LDO10_2V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo13: LDO13@a32 { + regulator-name = "LDO13_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo14: LDO14@a33 { + regulator-name = "LDO14_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo15: LDO15@a34 { + regulator-name = "LDO15_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo17: LDO17@a36 { + regulator-name = "LDO17_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo19: LDO19@a38 { + regulator-name = "LDO19_3V0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo21: LDO21@a40 { + regulator-name = "LDO21_1V8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo22: LDO22@a41 { + regulator-name = "LDO22_1V2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + }; + }; }; &uart2 {
Signature · 1 line
1.9.1