Skip to contentSkip to conversation

Add Support for Hi6220 PMIC Hi6553 MFD Core

PATCH RESEND Superseded Chen Feng 2 participants 9 messages Feb 1, 2016 – Feb 14, 2016

Subsystems (4)

v7 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Chen Feng

author
#0 lore raw

v7 cover Add Support for Hi6220 PMIC Hi6553 MFD Core

The patch sets add support for Hi6220 PMIC Hi655x MFD core and its regulator driver.
Current testing and support board is Hikey which is one of 96boards. It is an arm64 open source board. For more information about this board, please access https://www.96boards.org.

This is hardware layout for access PMIC Hi655x from AP SoC Hi6220. Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. We can use memory-mapped I/O to communicate.

  +----------------+             +-------------+
  |                |             |             |
  |    Hi6220      |   SSI bus   |   Hi655x    |
  |                |-------------|             |
  |                |(REGMAP_MMIO)|             |
  +----------------+             +-------------+

V2: Code refactoring of regulator.

V3: Drop mtcmos from this patch and use regmap-irq.

V4: Move the vset-table to driver code and donot open code for it.

V5: Use regulators_node and of_match, donot open code fot it.

V7: Change the constraints into hikey.dts and fix code in PMIC.

V7 RESEND: Resend these patch sets for error git email.

Chen Feng (5):
mfd: hi655x: Add document for mfd hi665x PMIC
regulator: hi655x: Document for hi655x regulator
mfd: hi655x: Add MFD driver for hi655x
regulator: hi655x: enable regulator for hi655x PMIC
arm64: dts: hisilicon: Add hi655x pmic dts node

 .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |  27 +++
 .../regulator/hisilicon,hi655x-regulator.txt       |  28 +++
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |  87 ++++++++
 drivers/mfd/Kconfig                                |  10 +
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/hi655x-pmic.c                          | 162 +++++++++++++++
 drivers/regulator/Kconfig                          |   8 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/hi655x-regulator.c               | 228 +++++++++++++++++++++
 include/linux/mfd/hi655x-pmic.h                    |  55 +++++
 10 files changed, 607 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
 create mode 100644 drivers/mfd/hi655x-pmic.c
 create mode 100644 drivers/regulator/hi655x-regulator.c
 create mode 100644 include/linux/mfd/hi655x-pmic.h
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH RESEND v7 1/5 mfd: hi655x: Add document for mfd hi665x PMIC

DT bindings for hisilicon hi655x MFD PMIC chip.

---
 .../devicetree/bindings/mfd/hisilicon,hi655x.txt   | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +27 -0
new file mode 100644
index 0000000..5edc310
@@ -0,0 +1,27 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
+Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
+We can use memory-mapped I/O to communicate.
+
++----------------+             +-------------+
+|                |             |             |
+|    Hi6220      |   SSI bus   |   Hi655x    |
+|                |-------------|             |
+|                |(REGMAP_MMIO)|             |
++----------------+             +-------------+
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic"
+- reg: Base address of PMIC on hi6220 soc
+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
+- pmic-gpios: The gpio used by PMIC irq.
+
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	}
Signature · 1 line
1.9.1
#2 lore raw

Re: [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC

Quoted 23 lines · Chen Feng

DT bindings for hisilicon hi655x MFD PMIC chip.

---
 .../devicetree/bindings/mfd/hisilicon,hi655x.txt   | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +6 -0
new file mode 100644
index 0000000..5edc310
@@ -0,0 +1,27 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
+Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
+We can use memory-mapped I/O to communicate.
+

Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 16

Quoted 10 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +10 -0
++----------------+             +-------------+
+|                |             |             |
+|    Hi6220      |   SSI bus   |   Hi655x    |
+|                |-------------|             |
+|                |(REGMAP_MMIO)|             |
++----------------+             +-------------+
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic"
+- reg: Base address of PMIC on hi6220 soc

s/hi6220 soc/Hi6220 SoC/

Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 18

Quoted 2 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +2 -0
+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
+- pmic-gpios: The gpio used by PMIC irq.

s/gpio/GPIO/
s/irq/IRQ/

These are always easier to read in this format:

- compatible: Should be "hisilicon,hi655x-pmic"
- reg: Base address of PMIC on hi6220 soc
- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
- pmic-gpios: The gpio used by PMIC irq.

Quoted 8 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +8 -0
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	}
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
author
#3 lore raw

Re: [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC

Thanks for your review.

Quoted 38 lines · Lee Jones
Quoted 23 lines · Chen Feng

DT bindings for hisilicon hi655x MFD PMIC chip.

---
 .../devicetree/bindings/mfd/hisilicon,hi655x.txt   | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +6 -0
new file mode 100644
index 0000000..5edc310
@@ -0,0 +1,27 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
+Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
+We can use memory-mapped I/O to communicate.
+

Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 16

Quoted 10 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +10 -0
++----------------+             +-------------+
+|                |             |             |
+|    Hi6220      |   SSI bus   |   Hi655x    |
+|                |-------------|             |
+|                |(REGMAP_MMIO)|             |
++----------------+             +-------------+
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic"
+- reg: Base address of PMIC on hi6220 soc

s/hi6220 soc/Hi6220 SoC/

Quoted 6 lines

Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt line 18

Quoted 2 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +2 -0
+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
+- pmic-gpios: The gpio used by PMIC irq.

s/gpio/GPIO/
s/irq/IRQ/

I will change this and send a new V8 version.

Quoted 16 lines

These are always easier to read in this format:

- compatible: Should be "hisilicon,hi655x-pmic"
- reg: Base address of PMIC on hi6220 soc
- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
- pmic-gpios: The gpio used by PMIC irq.

Quoted 8 lines
Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file +8 -0
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	}
author
#4 lore raw

PATCH RESEND v7 2/5 regulator: hi655x: Document for hi655x regulator

In reply to Chen Feng

This patch adds the device tree binding documentation for hi655x PMIC regulator.

---
 .../regulator/hisilicon,hi655x-regulator.txt       | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt new file +28 -0
new file mode 100644
index 0000000..09d3884
@@ -0,0 +1,28 @@
+Hisilicon Hi655x Voltage regulators
+
+Note:
+The hi655x regulator control is managed by hi655x Power IC.
+So the node of this regulator must be child node of hi655x
+PMIC node.
+
+The driver uses the regulator core framework, so please also
+take the bindings of regulator.txt for reference.
+
+The valid names for regulators are:
+
+LDO2 LDO7 LDO10 LDO13 LDO14 LDO15 LDO17 LDO19 LDO21 LDO22
+
+Example:
+        pmic: pmic@f8000000 {
+                compatible = "hisilicon,hi655x-pmic";
+		...
+		regulators {
+			ldo2: LDO2@a21 {
+				regulator-compatible = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+			...
+		}
+	}
Signature · 1 line
1.9.1
author
#5 lore raw

PATCH RESEND v7 3/5 mfd: hi655x: Add MFD driver for hi655x

In reply to Chen Feng

Add PMIC MFD driver to support hisilicon hi665x.

---
 drivers/mfd/Kconfig             |  10 +++
 drivers/mfd/Makefile            |   1 +
 drivers/mfd/hi655x-pmic.c       | 162 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/hi655x-pmic.h |  55 ++++++++++++++
 4 files changed, 228 insertions(+)
 create mode 100644 drivers/mfd/hi655x-pmic.c
 create mode 100644 include/linux/mfd/hi655x-pmic.h
drivers/mfd/Kconfig +10 -0
index 9ca66de..5b1c091 100644
@@ -284,6 +284,16 @@ config MFD_HI6421_PMIC
 	  menus in order to enable them.
 	  We communicate with the Hi6421 via memory-mapped I/O.
 
+config MFD_HI655X_PMIC
+	tristate "HiSilicon Hi655X series PMU/Codec IC"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on OF
+	select MFD_CORE
+	select REGMAP_MMIO
+	select REGMAP_IRQ
+	help
+	  Select this option to enable Hisilicon hi655x series pmic driver.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GPIOLIB && ARM
drivers/mfd/Makefile +1 -0
index 0f230a6..1e166c1 100644
@@ -190,6 +190,7 @@ obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
 obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
drivers/mfd/hi655x-pmic.c new file +162 -0

162 lines not on this page · raw message

include/linux/mfd/hi655x-pmic.h new file +55 -0

55 lines not on this page · raw message

Signature · 1 line
1.9.1
Acked-by on v7 3/5
#6 lore raw

Re: [RESEND v7 3/5] mfd: hi655x: Add MFD driver for hi655x

Quoted 6 lines · Chen Feng

Add PMIC MFD driver to support hisilicon hi665x.

Quoted 8 lines
---
 drivers/mfd/Kconfig             |  10 +++
 drivers/mfd/Makefile            |   1 +
 drivers/mfd/hi655x-pmic.c       | 162 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/hi655x-pmic.h |  55 ++++++++++++++
 4 files changed, 228 insertions(+)
 create mode 100644 drivers/mfd/hi655x-pmic.c
 create mode 100644 include/linux/mfd/hi655x-pmic.h
Quoted 262 lines
drivers/mfd/Kconfig +10 -0
index 9ca66de..5b1c091 100644
@@ -284,6 +284,16 @@ config MFD_HI6421_PMIC
 	  menus in order to enable them.
 	  We communicate with the Hi6421 via memory-mapped I/O.
 
+config MFD_HI655X_PMIC
+	tristate "HiSilicon Hi655X series PMU/Codec IC"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on OF
+	select MFD_CORE
+	select REGMAP_MMIO
+	select REGMAP_IRQ
+	help
+	  Select this option to enable Hisilicon hi655x series pmic driver.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GPIOLIB && ARM
drivers/mfd/Makefile +1 -0
index 0f230a6..1e166c1 100644
@@ -190,6 +190,7 @@ obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
 obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
drivers/mfd/hi655x-pmic.c new file +162 -0
new file mode 100644
index 0000000..05ddc78
@@ -0,0 +1,162 @@
+/*
+ * Device driver for MFD hi655x PMIC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Authors:
+ * Chen Feng <[email protected]>
+ * Fei  Wang <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/hi655x-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell hi655x_pmic_devs[] = {
+	{ .name = "hi655x-regulator", },
+};
+
+static const struct regmap_irq hi655x_irqs[] = {
+	{ .reg_offset = 0, .mask = OTMP_D1R_INT },
+	{ .reg_offset = 0, .mask = VSYS_2P5_R_INT },
+	{ .reg_offset = 0, .mask = VSYS_UV_D3R_INT },
+	{ .reg_offset = 0, .mask = VSYS_6P0_D200UR_INT },
+	{ .reg_offset = 0, .mask = PWRON_D4SR_INT },
+	{ .reg_offset = 0, .mask = PWRON_D20F_INT },
+	{ .reg_offset = 0, .mask = PWRON_D20R_INT },
+	{ .reg_offset = 0, .mask = RESERVE_INT },
+};
+
+static const struct regmap_irq_chip hi655x_irq_chip = {
+	.name = "hi655x-pmic",
+	.irqs = hi655x_irqs,
+	.num_regs = 1,
+	.num_irqs = ARRAY_SIZE(hi655x_irqs),
+	.status_base = HI655X_IRQ_STAT_BASE,
+	.mask_base = HI655X_IRQ_MASK_BASE,
+};
+
+static struct regmap_config hi655x_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = HI655X_STRIDE,
+	.val_bits = 8,
+	.max_register = HI655X_BUS_ADDR(0xFFF),
+};
+
+static void hi655x_local_irq_clear(struct regmap *map)
+{
+	int i;
+
+	regmap_write(map, HI655X_ANA_IRQM_BASE, HI655X_IRQ_CLR);
+	for (i = 0; i < HI655X_IRQ_ARRAY; i++) {
+		regmap_write(map, HI655X_IRQ_STAT_BASE + i * HI655X_STRIDE,
+			     HI655X_IRQ_CLR);
+	}
+}
+
+static int hi655x_pmic_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct hi655x_pmic *pmic;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	void __iomem *base;
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+	pmic->dev = dev;
+
+	pmic->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pmic->res)
+		return -ENOENT;
+
+	base = devm_ioremap_resource(dev, pmic->res);
+	if (!base)
+		return -ENOMEM;
+
+	pmic->regmap = devm_regmap_init_mmio_clk(dev, NULL, base,
+						 &hi655x_regmap_config);
+
+	regmap_read(pmic->regmap, HI655X_BUS_ADDR(HI655X_VER_REG), &pmic->ver);
+	if ((pmic->ver < PMU_VER_START) || (pmic->ver > PMU_VER_END)) {
+		dev_warn(dev, "PMU version %d unsupported\n", pmic->ver);
+		return -EINVAL;
+	}
+
+	hi655x_local_irq_clear(pmic->regmap);
+
+	pmic->gpio = of_get_named_gpio(np, "pmic-gpios", 0);
+	if (!gpio_is_valid(pmic->gpio)) {
+		dev_err(dev, "Failed to get the pmic-gpios\n");
+		return -ENODEV;
+	}
+
+	ret = devm_gpio_request_one(dev, pmic->gpio, GPIOF_IN,
+				    "hi655x_pmic_irq");
+	if (ret < 0) {
+		dev_err(dev, "Failed to request gpio %d  ret = %d\n",
+			pmic->gpio, ret);
+		return ret;
+	}
+
+	ret = regmap_add_irq_chip(pmic->regmap, gpio_to_irq(pmic->gpio),
+				  IRQF_TRIGGER_LOW | IRQF_NO_SUSPEND, 0,
+				  &hi655x_irq_chip, &pmic->irq_data);
+	if (ret) {
+		dev_err(dev, "Failed to obtain 'hi655x_pmic_irq' %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pmic);
+
+	ret = mfd_add_devices(dev, PLATFORM_DEVID_AUTO, hi655x_pmic_devs,
+			      ARRAY_SIZE(hi655x_pmic_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to register device %d\n", ret);
+		regmap_del_irq_chip(gpio_to_irq(pmic->gpio), pmic->irq_data);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int hi655x_pmic_remove(struct platform_device *pdev)
+{
+	struct hi655x_pmic *pmic = platform_get_drvdata(pdev);
+
+	regmap_del_irq_chip(gpio_to_irq(pmic->gpio), pmic->irq_data);
+	mfd_remove_devices(&pdev->dev);
+	return 0;
+}
+
+static const struct of_device_id hi655x_pmic_match[] = {
+	{ .compatible = "hisilicon,hi655x-pmic", },
+	{},
+};
+
+static struct platform_driver hi655x_pmic_driver = {
+	.driver	= {
+		.name =	"hi655x-pmic",
+		.of_match_table = of_match_ptr(hi655x_pmic_match),
+	},
+	.probe  = hi655x_pmic_probe,
+	.remove = hi655x_pmic_remove,
+};
+module_platform_driver(hi655x_pmic_driver);
+
+MODULE_AUTHOR("Chen Feng <[email protected]>");
+MODULE_DESCRIPTION("Hisilicon hi655x PMIC driver");
+MODULE_LICENSE("GPL v2");
include/linux/mfd/hi655x-pmic.h new file +55 -0
new file mode 100644
index 0000000..dbbe9a6
@@ -0,0 +1,55 @@
+/*
+ * Device driver for regulators in hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Authors:
+ * Chen Feng <[email protected]>
+ * Fei  Wang <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __HI655X_PMIC_H
+#define __HI655X_PMIC_H
+
+/* Hi655x registers are mapped to memory bus in 4 bytes stride */
+#define HI655X_STRIDE                   4
+#define HI655X_BUS_ADDR(x)              ((x) << 2)
+
+#define HI655X_BITS                     8
+
+#define HI655X_NR_IRQ                   32
+
+#define HI655X_IRQ_STAT_BASE            (0x003 << 2)
+#define HI655X_IRQ_MASK_BASE            (0x007 << 2)
+#define HI655X_ANA_IRQM_BASE            (0x1b5 << 2)
+#define HI655X_IRQ_ARRAY                4
+#define HI655X_IRQ_MASK                 0xFF
+#define HI655X_IRQ_CLR                  0xFF
+#define HI655X_VER_REG                  0x00
+
+#define PMU_VER_START                   0x10
+#define PMU_VER_END                     0x38
+
+#define RESERVE_INT                     BIT(7)
+#define PWRON_D20R_INT                  BIT(6)
+#define PWRON_D20F_INT                  BIT(5)
+#define PWRON_D4SR_INT                  BIT(4)
+#define VSYS_6P0_D200UR_INT             BIT(3)
+#define VSYS_UV_D3R_INT                 BIT(2)
+#define VSYS_2P5_R_INT                  BIT(1)
+#define OTMP_D1R_INT                    BIT(0)
+
+struct hi655x_pmic {
+	struct resource *res;
+	struct device *dev;
+	struct regmap *regmap;
+	int gpio;
+	unsigned int ver;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+#endif
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
author
#7 lore raw

PATCH RESEND v7 4/5 regulator: hi655x: enable regulator for hi655x PMIC

In reply to Chen Feng

Add the regulator driver for hi655x PMIC.

---
 drivers/regulator/Kconfig            |   8 ++
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/hi655x-regulator.c | 228 +++++++++++++++++++++++++++++++++++
 3 files changed, 237 insertions(+)
 create mode 100644 drivers/regulator/hi655x-regulator.c
drivers/regulator/Kconfig +8 -0
index 8155e80..cd8ce7e 100644
@@ -261,6 +261,14 @@ config REGULATOR_HI6421
 	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 	  of them come with support to either ECO (idle) or sleep mode.
 
+config REGULATOR_HI655X
+	tristate "Hisilicon HI655X PMIC regulators support"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on MFD_HI655X_PMIC && OF
+	help
+	  This driver provides support for the voltage regulators of the
+	  Hisilicon Hi655x PMIC device.
+
 config REGULATOR_ISL9305
 	tristate "Intersil ISL9305 regulator"
 	depends on I2C
drivers/regulator/Makefile +1 -0
index 980b194..422786c 100644
@@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
 obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
drivers/regulator/hi655x-regulator.c new file +228 -0

228 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#8 lore raw

PATCH RESEND v7 5/5 arm64: dts: hisilicon: Add hi655x pmic dts node

In reply to Chen Feng

Add the mfd hi655x dts node and regulator support on hi6220 platform.

---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +87 -0
index 8185251..775ea36 100644
@@ -6,6 +6,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 
 /*Reserved 1MB memory for MCU*/
 /memreserve/ 0x05e00000 0x00100000;
@@ -31,6 +32,92 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+
+		regulators {
+			ldo2: LDO2@a21 {
+				regulator-name = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo7: LDO7@a26 {
+				regulator-name = "LDO7_SDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo10: LDO10@a29 {
+				regulator-name = "LDO10_2V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo13: LDO13@a32 {
+				regulator-name = "LDO13_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo14: LDO14@a33 {
+				regulator-name = "LDO14_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo15: LDO15@a34 {
+				regulator-name = "LDO15_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo17: LDO17@a36 {
+				regulator-name = "LDO17_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo19: LDO19@a38 {
+				regulator-name = "LDO19_3V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo21: LDO21@a40 {
+				regulator-name = "LDO21_1V8";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo22: LDO22@a41 {
+				regulator-name = "LDO22_1V2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+		};
+	};
 };
 
 &uart2 {
Signature · 1 line
1.9.1