armv8: ls2080a: remove obsolete stream ID partitioning support

index 4e4861d..7a64f41 100644
@@ -70,115 +70,6 @@ void ft_fixup_cpu(void *blob)
 }
 #endif
 
-/*
- * the burden is on the the caller to not request a count
- * exceeding the bounds of the stream_ids[] array
- */
-void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt)
-{
-	int i;
-
-	if (count > max_cnt) {
-		printf("\n%s: ERROR: max per-device stream ID count exceed\n",
-		       __func__);
-		return;
-	}
-
-	for (i = 0; i < count; i++)
-		stream_ids[i] = start_id++;
-}
-
-/*
- * This function updates the mmu-masters property on the SMMU
- * node as per the SMMU binding-- phandle and list of stream IDs
- * for each MMU master.
- */
-void append_mmu_masters(void *blob, const char *smmu_path,
-			const char *master_name, u32 *stream_ids, int count)
-{
-	u32 phandle;
-	int smmu_nodeoffset;
-	int master_nodeoffset;
-	int i;
-
-	/* get phandle of mmu master device */
-	master_nodeoffset = fdt_path_offset(blob, master_name);
-	if (master_nodeoffset < 0) {
-		printf("\n%s: ERROR: master not found\n", __func__);
-		return;
-	}
-	phandle = fdt_get_phandle(blob, master_nodeoffset);
-	if (!phandle) { /* if master has no phandle, create one */
-		phandle = fdt_create_phandle(blob, master_nodeoffset);
-		if (!phandle) {
-			printf("\n%s: ERROR: unable to create phandle\n",
-			       __func__);
-			return;
-		}
-	}
-
-	/* append it to mmu-masters */
-	smmu_nodeoffset = fdt_path_offset(blob, smmu_path);
-	if (fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters",
-			       phandle) < 0) {
-		printf("\n%s: ERROR: unable to update SMMU node\n", __func__);
-		return;
-	}
-
-	/* for each stream ID, append to mmu-masters */
-	for (i = 0; i < count; i++) {
-		fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters",
-				   stream_ids[i]);
-	}
-
-	/* fix up #stream-id-cells with stream ID count */
-	if (fdt_setprop_u32(blob, master_nodeoffset, "#stream-id-cells",
-			    count) < 0)
-		printf("\n%s: ERROR: unable to update #stream-id-cells\n",
-		       __func__);
-}
-
-
-/*
- * The info below summarizes how streamID partitioning works
- * for ls2080a and how it is conveyed to the OS via the device tree.
- *
- *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
- *     -all legacy devices get a unique ICID assigned and programmed in
- *      their AMQR registers by u-boot
- *     -u-boot updates the hardware device tree with streamID properties
- *      for each platform/legacy device (smmu-masters property)
- *
- *  -PCIe
- *     -for each PCI controller that is active (as per RCW settings),
- *      u-boot will allocate a range of ICID and convey that to Linux via
- *      the device tree (smmu-masters property)
- *
- *  -DPAA2
- *     -u-boot will allocate a range of ICIDs to be used by the Management
- *      Complex for containers and will set these values in the MC DPC image.
- *     -the MC is responsible for allocating and setting up ICIDs
- *      for all DPAA2 devices.
- *
- */
-#ifdef CONFIG_FSL_LSCH3
-static void fdt_fixup_smmu(void *blob)
-{
-	int nodeoffset;
-
-	nodeoffset = fdt_path_offset(blob, "/iommu at 5000000");
-	if (nodeoffset < 0) {
-		printf("\n%s: WARNING: no SMMU node found\n", __func__);
-		return;
-	}
-
-	/* fixup for all PCI controllers */
-#ifdef CONFIG_PCI
-	fdt_fixup_smmu_pcie(blob);
-#endif
-}
-#endif
-
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 #ifdef CONFIG_MP

@@ -200,8 +91,4 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_FSL_ESDHC
 	fdt_fixup_esdhc(blob, bd);
 #endif
-
-#ifdef CONFIG_FSL_LSCH3
-	fdt_fixup_smmu(blob);
-#endif
 }

73 lines not on this page · raw message

index 954104b..ee28323 100644
@@ -7,28 +7,48 @@
 #ifndef __FSL_STREAM_ID_H
 #define __FSL_STREAM_ID_H
 
-/* Stream IDs on ls2080a devices are not hardwired and are
+/*
+ * Stream IDs on ls2080a devices are not hardwired and are
  * programmed by sw.  There are a limited number of stream IDs
  * available, and the partitioning of them is scenario dependent.
  * This header defines the partitioning between legacy, PCI,
  * and DPAA2 devices.
  *
- * This partitiong can be customized in this file depending
- * on the specific hardware config-- e.g. perhaps not all
- * PEX controllers are in use.
+ * This partitioning can be customized in this file depending
+ * on the specific hardware config:
+ *
+ *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
+ *     -all legacy devices get a unique stream ID assigned and programmed in
+ *      their AMQR registers by u-boot
+ *
+ *  -PCIe
+ *     -there is a range of stream IDs set aside for PCI in this
+ *      file.  U-boot will scan the PCI bus and for each device discovered:
+ *         -allocate a streamID
+ *         -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
+ *         -set a msi-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
+ *          for more info on the msi-map definition)
  *
- * On LS2080 stream IDs are programmed in AMQ registers (32-bits) for
+ *  -DPAA2
+ *     -u-boot will allocate a range of stream IDs to be used by the Management
+ *      Complex for containers and will set these values in the MC DPC image.
+ *     -the MC is responsible for allocating and setting up 'isolation context
+ *      IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
+ *
+ * On ls2080a SoCs stream IDs are programmed in AMQ registers (32-bits) for
  * each of the different bus masters.  The relationship between
  * the AMQ registers and stream IDs is defined in the table below:
  *          AMQ bit    streamID bit
  *      ---------------------------
- *           PL[18]         9
- *          BMT[17]         8
- *           VA[16]         7
- *             [15]         -
- *         ICID[14:7]       -
- *         ICID[6:0]        6-0
+ *           PL[18]         9        // privilege bit
+ *          BMT[17]         8        // bypass translation
+ *           VA[16]         7        // reserved
+ *             [15]         -        // unused
+ *         ICID[14:7]       -        // unused
+ *         ICID[6:0]        6-0      // isolation context id
  *     ----------------------------
+ *
  */
 
 #define AMQ_PL_MASK			(0x1 << 18)   /* priviledge bit */

@@ -46,16 +66,9 @@
 #define FSL_SATA2_STREAM_ID		5
 #define FSL_DMA_STREAM_ID		6
 
-/* PCI - programmed in PEXn_LUT by OS */
-/*   4 IDs per controller */
-#define FSL_PEX1_STREAM_ID_START	7
-#define FSL_PEX1_STREAM_ID_END		10
-#define FSL_PEX2_STREAM_ID_START	11
-#define FSL_PEX2_STREAM_ID_END		14
-#define FSL_PEX3_STREAM_ID_START	15
-#define FSL_PEX3_STREAM_ID_END		18
-#define FSL_PEX4_STREAM_ID_START	19
-#define FSL_PEX4_STREAM_ID_END		22
+/* PCI - programmed in PEXn_LUT */
+#define FSL_PEX_STREAM_ID_START		7
+#define FSL_PEX_STREAM_ID_END		22
 
 /* DPAA2 - set in MC DPC and alloced by MC */
 #define FSL_DPAA2_STREAM_ID_START	23

index 91f3ce8..d04e336 100644
@@ -86,6 +86,10 @@
 #define PCIE_LUT_BASE				0x80000
 #define PCIE_LUT_LCTRL0				0x7F8
 #define PCIE_LUT_DBG				0x7FC
+#define PCIE_LUT_UDR(n)         (0x800 + (n) * 8)
+#define PCIE_LUT_LDR(n)         (0x804 + (n) * 8)
+#define PCIE_LUT_ENABLE         (1 << 31)
+#define PCIE_LUT_ENTRY_COUNT    32
 
 /* Device Configuration */
 #define DCFG_BASE		0x01e00000

index bb29222..5cc6855 100644
@@ -93,6 +93,7 @@ struct ls_pcie {
 	void __iomem *dbi;
 	void __iomem *va_cfg0;
 	void __iomem *va_cfg1;
+	int next_lut_index;
 	struct pci_controller hose;
 };
 

@@ -482,6 +483,34 @@ static void ls_pcie_setup_ep(struct ls_pcie *pcie, struct ls_pcie_info *info)
 	}
 }
 
+#ifdef CONFIG_FSL_LSCH3
+/*
+ * Return next available LUT index.
+ */
+static int ls_pcie_next_lut_index(struct ls_pcie *pcie)
+{
+	if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
+		return pcie->next_lut_index++;
+	else
+		return -1;  /* LUT is full */
+}
+
+/*
+ * Program a single LUT entry
+ */
+static void ls_pcie_lut_set_mapping(struct ls_pcie *pcie, int index, u32 devid,
+			     u32 streamid)
+{
+	void __iomem *lut;
+
+	lut = pcie->dbi + PCIE_LUT_BASE;
+
+	/* leave mask as all zeroes, want to match all bits */
+	writel((devid << 16), lut + PCIE_LUT_UDR(index));
+	writel(streamid | PCIE_LUT_ENABLE, lut + PCIE_LUT_LDR(index));
+}
+#endif
+
 int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
 {
 	struct ls_pcie *pcie;

@@ -513,6 +542,7 @@ int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
 	pcie->va_cfg1 = map_physmem(info->cfg1_phys,
 				    info->cfg1_size,
 				    MAP_NOCACHE);
+	pcie->next_lut_index = 0;
 
 	/* outbound memory */
 	pci_set_region(&hose->regions[0],

index f3bf689..73af423 100644
@@ -520,6 +520,48 @@ static u32 ls_pcie_next_streamid(void)
 
 	return next_stream_id++;
 }
+
+/*
+ * An msi-map is a property to be added to the pci controller
+ * node.  It is a table, where each entry consists of 4 fields
+ * e.g.:
+ *
+ *      msi-map = <[devid] [phandle-to-msi-ctrl] [stream-id] [count]
+ *                 [devid] [phandle-to-msi-ctrl] [stream-id] [count]>;
+ */
+static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie *pcie,
+				       u32 devid, u32 streamid)
+{
+	char pcie_path[19];
+	u32 *prop;
+	u32 phandle;
+	int nodeoffset;
+
+	/* find pci controller node */
+	snprintf(pcie_path, sizeof(pcie_path), "/soc/pcie@%llx",
+		 (u64)pcie->dbi);
+	nodeoffset = fdt_path_offset(blob, pcie_path);
+	if (nodeoffset < 0) {
+		printf("\n%s: ERROR: unable to update PCIe node: %s\n",
+		       __func__, pcie_path);
+		return;
+	}
+
+	/* get phandle to MSI controller */
+	prop = (u32 *)fdt_getprop(blob, nodeoffset, "msi-parent", 0);
+	if (prop == NULL) {
+		printf("\n%s: ERROR: missing msi-parent: %s\n", __func__,
+		       pcie_path);
+		return;
+	}
+	phandle = be32_to_cpu(*prop);
+
+	/* set one msi-map row */
+	fdt_appendprop_u32(blob, nodeoffset, "msi-map", devid);
+	fdt_appendprop_u32(blob, nodeoffset, "msi-map", phandle);
+	fdt_appendprop_u32(blob, nodeoffset, "msi-map", streamid);
+	fdt_appendprop_u32(blob, nodeoffset, "msi-map", 1);
+}
 #endif
 
 int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)