Skip to contentSkip to conversation

drm/i915/guc: use symbolic names for module parameter values

PATCH Superseded Dave Gordon 3 participants 10 messages Jul 22, 2016 – Aug 2, 2016

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover drm/i915/guc: use symbolic names for module parameter values

There are various literal constants used in the GuC module-parameter processing code; this sequence of patches replaces them with symbolic names for greater clarity.

And then it re-enables GuC submission by default :)

v3:
Original patch broken into two (1/4 + 2/4)
Name for GuC log level NONE added (3/4
Re-enable GuC loading & submission (4/4)
Added cover letter :)

Dave Gordon (4):
drm/i915/guc: symbolic names for GuC submission preferences drm/i915/guc: symbolic names for GuC firmare loading preferences drm/i915/guc: symbolic name for GuC log-level none drm/i915/guc: use symbolic names in setting defaults for module
parameters

 drivers/gpu/drm/i915/i915_guc_submission.c |  4 ++--
 drivers/gpu/drm/i915/i915_params.c         |  6 +++---
 drivers/gpu/drm/i915/intel_guc.h           | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_guc_fwif.h      |  1 +
 drivers/gpu/drm/i915/intel_guc_loader.c    | 30 ++++++++++++++++--------------
 drivers/gpu/drm/i915/intel_lrc.c           |  6 +++---
 6 files changed, 45 insertions(+), 22 deletions(-)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v3 1/4 drm/i915/guc: symbolic names for GuC submission preferences

The existing code that accesses the "enable_guc_submission" parameter uses explicit numerical values for the various possibilities, including in one case relying on boolean 0/1 mapping to specific values (which could be confusing for maintainers).

So this patch just provides and uses names for the values representing the DEFAULT, DISABLED, PREFERRED, and MANDATORY submission options that the user can select (-1, 0, 1, 2 respectively).

This should produce identical code to the previous version!

Cc Tvrtko Ursulin <[email protected]>
---
 drivers/gpu/drm/i915/i915_guc_submission.c |  2 +-
 drivers/gpu/drm/i915/intel_guc.h           |  6 ++++++
 drivers/gpu/drm/i915/intel_guc_loader.c    | 15 ++++++++-------
 drivers/gpu/drm/i915/intel_lrc.c           |  6 +++---
 4 files changed, 18 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -1
index 01c1c16..e564c976 100644
@@ -971,7 +971,7 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	bitmap_clear(guc->doorbell_bitmap, 0, GUC_MAX_DOORBELLS);
 	i915_guc_submission_disable(dev_priv);
 
-	if (!i915.enable_guc_submission)
+	if (i915.enable_guc_submission == GUC_SUBMISSION_DISABLED)
 		return 0; /* not enabled  */
 
 	if (guc->ctx_pool_obj)
drivers/gpu/drm/i915/intel_guc.h +6 -0
index 3e3e743..52ecbba 100644
@@ -90,6 +90,12 @@ struct i915_guc_client {
 	uint64_t submissions[I915_NUM_ENGINES];
 };
 
+enum {
+	GUC_SUBMISSION_DEFAULT = -1,
+	GUC_SUBMISSION_DISABLED = 0,
+	GUC_SUBMISSION_PREFERRED,
+	GUC_SUBMISSION_MANDATORY
+};
 enum intel_guc_fw_status {
 	GUC_FIRMWARE_FAIL = -1,
 	GUC_FIRMWARE_NONE = 0,
drivers/gpu/drm/i915/intel_guc_loader.c +8 -7
index b883efd..d8bd4cb 100644
@@ -189,7 +189,7 @@ static void set_guc_init_params(struct drm_i915_private *dev_priv)
 	}
 
 	/* If GuC submission is enabled, set up additional parameters here */
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		u32 pgs = i915_gem_obj_ggtt_offset(dev_priv->guc.ctx_pool_obj);
 		u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
 
@@ -495,7 +495,7 @@ int intel_guc_setup(struct drm_device *dev)
 		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
 		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		err = i915_guc_submission_enable(dev_priv);
 		if (err)
 			goto fail;
@@ -523,7 +523,7 @@ int intel_guc_setup(struct drm_device *dev)
 	 */
 	if (i915.enable_guc_loading > 1) {
 		ret = -EIO;
-	} else if (i915.enable_guc_submission > 1) {
+	} else if (i915.enable_guc_submission >= GUC_SUBMISSION_MANDATORY) {
 		ret = -EIO;
 	} else {
 		ret = 0;
@@ -538,7 +538,7 @@ int intel_guc_setup(struct drm_device *dev)
 	else
 		DRM_ERROR("GuC firmware load failed: %d\n", err);
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		if (fw_path == NULL)
 			DRM_INFO("GuC submission without firmware not supported\n");
 		if (ret == 0)
@@ -546,7 +546,7 @@ int intel_guc_setup(struct drm_device *dev)
 		else
 			DRM_ERROR("GuC init failed: %d\n", ret);
 	}
-	i915.enable_guc_submission = 0;
+	i915.enable_guc_submission = GUC_SUBMISSION_DISABLED;
 
 	return ret;
 }
@@ -690,8 +690,9 @@ void intel_guc_init(struct drm_device *dev)
 	/* A negative value means "use platform default" */
 	if (i915.enable_guc_loading < 0)
 		i915.enable_guc_loading = HAS_GUC_UCODE(dev);
-	if (i915.enable_guc_submission < 0)
-		i915.enable_guc_submission = HAS_GUC_SCHED(dev);
+	if (i915.enable_guc_submission <= GUC_SUBMISSION_DEFAULT)
+		i915.enable_guc_submission = HAS_GUC_SCHED(dev) ?
+			GUC_SUBMISSION_PREFERRED : GUC_SUBMISSION_DISABLED;
 
 	if (!HAS_GUC_UCODE(dev)) {
 		fw_path = NULL;
drivers/gpu/drm/i915/intel_lrc.c +3 -3
index daf1279..960e676 100644
@@ -716,7 +716,7 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request
 
 	request->ringbuf = ce->ringbuf;
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		/*
 		 * Check that the GuC has space for the request before
 		 * going any further, as the i915_add_request() call
@@ -795,7 +795,7 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request
 	request->previous_context = engine->last_context;
 	engine->last_context = request->ctx;
 
-	if (i915.enable_guc_submission)
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED)
 		i915_guc_submit(request);
 	else
 		execlists_context_queue(request);
@@ -988,7 +988,7 @@ static int intel_lr_context_pin(struct i915_gem_context *ctx,
 	ce->state->dirty = true;
 
 	/* Invalidate GuC TLB. */
-	if (i915.enable_guc_submission)
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED)
 		I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
 
 	i915_gem_context_get(ctx);
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#2 lore raw

Re: [PATCH v3 1/4] drm/i915/guc: symbolic names for GuC submission preferences

Quoted 75 lines · Dave Gordon

The existing code that accesses the "enable_guc_submission" parameter uses explicit numerical values for the various possibilities, including in one case relying on boolean 0/1 mapping to specific values (which could be confusing for maintainers).

So this patch just provides and uses names for the values representing the DEFAULT, DISABLED, PREFERRED, and MANDATORY submission options that the user can select (-1, 0, 1, 2 respectively).

This should produce identical code to the previous version!

Cc Tvrtko Ursulin <[email protected]>
---
 drivers/gpu/drm/i915/i915_guc_submission.c |  2 +-
 drivers/gpu/drm/i915/intel_guc.h           |  6 ++++++
 drivers/gpu/drm/i915/intel_guc_loader.c    | 15 ++++++++-------
 drivers/gpu/drm/i915/intel_lrc.c           |  6 +++---
 4 files changed, 18 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -1
index 01c1c16..e564c976 100644
@@ -971,7 +971,7 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	bitmap_clear(guc->doorbell_bitmap, 0, GUC_MAX_DOORBELLS);
 	i915_guc_submission_disable(dev_priv);
 
-	if (!i915.enable_guc_submission)
+	if (i915.enable_guc_submission == GUC_SUBMISSION_DISABLED)
 		return 0; /* not enabled  */
 
 	if (guc->ctx_pool_obj)
drivers/gpu/drm/i915/intel_guc.h +6 -0
index 3e3e743..52ecbba 100644
@@ -90,6 +90,12 @@ struct i915_guc_client {
 	uint64_t submissions[I915_NUM_ENGINES];
 };
 
+enum {
+	GUC_SUBMISSION_DEFAULT = -1,
+	GUC_SUBMISSION_DISABLED = 0,
+	GUC_SUBMISSION_PREFERRED,
+	GUC_SUBMISSION_MANDATORY
+};
 enum intel_guc_fw_status {
 	GUC_FIRMWARE_FAIL = -1,
 	GUC_FIRMWARE_NONE = 0,
drivers/gpu/drm/i915/intel_guc_loader.c +2 -2
index b883efd..d8bd4cb 100644
@@ -189,7 +189,7 @@ static void set_guc_init_params(struct drm_i915_private *dev_priv)
 	}
 
 	/* If GuC submission is enabled, set up additional parameters here */
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		u32 pgs = i915_gem_obj_ggtt_offset(dev_priv->guc.ctx_pool_obj);
 		u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
 
@@ -495,7 +495,7 @@ int intel_guc_setup(struct drm_device *dev)
 		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
 		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		err = i915_guc_submission_enable(dev_priv);
 		if (err)
 			goto fail;

drivers/gpu/drm/i915/intel_guc_loader.c int intel_guc_setup(struct drm_device *dev) · line 526

Quoted 5 lines
drivers/gpu/drm/i915/intel_guc_loader.c +1 -1
@@ -523,7 +523,7 @@ int intel_guc_setup(struct drm_device *dev)
 	 */
 	if (i915.enable_guc_loading > 1) {
 		ret = -EIO;
-	} else if (i915.enable_guc_submission > 1) {
+	} else if (i915.enable_guc_submission >= GUC_SUBMISSION_MANDATORY) {

I like the patches in general, but now these >= and <= seem rather out of place. How about using == and != exclusively?

BR,
Jani.

Quoted 64 lines
drivers/gpu/drm/i915/intel_guc_loader.c +5 -4
 		ret = -EIO;
 	} else {
 		ret = 0;
@@ -538,7 +538,7 @@ int intel_guc_setup(struct drm_device *dev)
 	else
 		DRM_ERROR("GuC firmware load failed: %d\n", err);
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		if (fw_path == NULL)
 			DRM_INFO("GuC submission without firmware not supported\n");
 		if (ret == 0)
@@ -546,7 +546,7 @@ int intel_guc_setup(struct drm_device *dev)
 		else
 			DRM_ERROR("GuC init failed: %d\n", ret);
 	}
-	i915.enable_guc_submission = 0;
+	i915.enable_guc_submission = GUC_SUBMISSION_DISABLED;
 
 	return ret;
 }
@@ -690,8 +690,9 @@ void intel_guc_init(struct drm_device *dev)
 	/* A negative value means "use platform default" */
 	if (i915.enable_guc_loading < 0)
 		i915.enable_guc_loading = HAS_GUC_UCODE(dev);
-	if (i915.enable_guc_submission < 0)
-		i915.enable_guc_submission = HAS_GUC_SCHED(dev);
+	if (i915.enable_guc_submission <= GUC_SUBMISSION_DEFAULT)
+		i915.enable_guc_submission = HAS_GUC_SCHED(dev) ?
+			GUC_SUBMISSION_PREFERRED : GUC_SUBMISSION_DISABLED;
 
 	if (!HAS_GUC_UCODE(dev)) {
 		fw_path = NULL;
drivers/gpu/drm/i915/intel_lrc.c +3 -3
index daf1279..960e676 100644
@@ -716,7 +716,7 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request
 
 	request->ringbuf = ce->ringbuf;
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		/*
 		 * Check that the GuC has space for the request before
 		 * going any further, as the i915_add_request() call
@@ -795,7 +795,7 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request
 	request->previous_context = engine->last_context;
 	engine->last_context = request->ctx;
 
-	if (i915.enable_guc_submission)
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED)
 		i915_guc_submit(request);
 	else
 		execlists_context_queue(request);
@@ -988,7 +988,7 @@ static int intel_lr_context_pin(struct i915_gem_context *ctx,
 	ce->state->dirty = true;
 
 	/* Invalidate GuC TLB. */
-	if (i915.enable_guc_submission)
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED)
 		I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
 
 	i915_gem_context_get(ctx);
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

Re: [PATCH v3 1/4] drm/i915/guc: symbolic names for GuC submission preferences

Quoted 85 lines · Jani Nikula
Quoted 75 lines · Dave Gordon

The existing code that accesses the "enable_guc_submission" parameter uses explicit numerical values for the various possibilities, including in one case relying on boolean 0/1 mapping to specific values (which could be confusing for maintainers).

So this patch just provides and uses names for the values representing the DEFAULT, DISABLED, PREFERRED, and MANDATORY submission options that the user can select (-1, 0, 1, 2 respectively).

This should produce identical code to the previous version!

Cc Tvrtko Ursulin <[email protected]>
---
 drivers/gpu/drm/i915/i915_guc_submission.c |  2 +-
 drivers/gpu/drm/i915/intel_guc.h           |  6 ++++++
 drivers/gpu/drm/i915/intel_guc_loader.c    | 15 ++++++++-------
 drivers/gpu/drm/i915/intel_lrc.c           |  6 +++---
 4 files changed, 18 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -1
index 01c1c16..e564c976 100644
@@ -971,7 +971,7 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)
 	bitmap_clear(guc->doorbell_bitmap, 0, GUC_MAX_DOORBELLS);
 	i915_guc_submission_disable(dev_priv);
 
-	if (!i915.enable_guc_submission)
+	if (i915.enable_guc_submission == GUC_SUBMISSION_DISABLED)
 		return 0; /* not enabled  */
 
 	if (guc->ctx_pool_obj)
drivers/gpu/drm/i915/intel_guc.h +6 -0
index 3e3e743..52ecbba 100644
@@ -90,6 +90,12 @@ struct i915_guc_client {
 	uint64_t submissions[I915_NUM_ENGINES];
 };
 
+enum {
+	GUC_SUBMISSION_DEFAULT = -1,
+	GUC_SUBMISSION_DISABLED = 0,
+	GUC_SUBMISSION_PREFERRED,
+	GUC_SUBMISSION_MANDATORY
+};
 enum intel_guc_fw_status {
 	GUC_FIRMWARE_FAIL = -1,
 	GUC_FIRMWARE_NONE = 0,
drivers/gpu/drm/i915/intel_guc_loader.c +2 -2
index b883efd..d8bd4cb 100644
@@ -189,7 +189,7 @@ static void set_guc_init_params(struct drm_i915_private *dev_priv)
 	}
 
 	/* If GuC submission is enabled, set up additional parameters here */
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		u32 pgs = i915_gem_obj_ggtt_offset(dev_priv->guc.ctx_pool_obj);
 		u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
 
@@ -495,7 +495,7 @@ int intel_guc_setup(struct drm_device *dev)
 		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
 		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		err = i915_guc_submission_enable(dev_priv);
 		if (err)
 			goto fail;

drivers/gpu/drm/i915/intel_guc_loader.c int intel_guc_setup(struct drm_device *dev) · line 526

Quoted 5 lines
drivers/gpu/drm/i915/intel_guc_loader.c +1 -1
@@ -523,7 +523,7 @@ int intel_guc_setup(struct drm_device *dev)
 	 */
 	if (i915.enable_guc_loading > 1) {
 		ret = -EIO;
-	} else if (i915.enable_guc_submission > 1) {
+	} else if (i915.enable_guc_submission >= GUC_SUBMISSION_MANDATORY) {

I like the patches in general, but now these >= and <= seem rather out of place. How about using == and != exclusively?

Quoted 2 lines

BR,
Jani.

That would leave us with undefined behaviour for values outside the recognised range. This way it clips out-of-range values to the nearest extremum. Of course we could make it fail completely for invalid values, but that's just really annoying for the developer or admin who's mistyped -1 as -2 or forgotten what the maximum supported value is in this release. Alternatively we could convert all out-of-range values to "system default" i.e. ignored, which might still be annoying but not quite as much.

Any other suggestions for how to handle out-of-range values?

But if we were changing the policy shouldn't that be a separate patch? This patch is supposed to change only the way the code is written, with no effect to existing behaviour!

.Dave.

Quoted 58 lines
Quoted 58 lines
drivers/gpu/drm/i915/intel_guc_loader.c +5 -4
 		ret = -EIO;
 	} else {
 		ret = 0;
@@ -538,7 +538,7 @@ int intel_guc_setup(struct drm_device *dev)
 	else
 		DRM_ERROR("GuC firmware load failed: %d\n", err);
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		if (fw_path == NULL)
 			DRM_INFO("GuC submission without firmware not supported\n");
 		if (ret == 0)
@@ -546,7 +546,7 @@ int intel_guc_setup(struct drm_device *dev)
 		else
 			DRM_ERROR("GuC init failed: %d\n", ret);
 	}
-	i915.enable_guc_submission = 0;
+	i915.enable_guc_submission = GUC_SUBMISSION_DISABLED;
 
 	return ret;
 }
@@ -690,8 +690,9 @@ void intel_guc_init(struct drm_device *dev)
 	/* A negative value means "use platform default" */
 	if (i915.enable_guc_loading < 0)
 		i915.enable_guc_loading = HAS_GUC_UCODE(dev);
-	if (i915.enable_guc_submission < 0)
-		i915.enable_guc_submission = HAS_GUC_SCHED(dev);
+	if (i915.enable_guc_submission <= GUC_SUBMISSION_DEFAULT)
+		i915.enable_guc_submission = HAS_GUC_SCHED(dev) ?
+			GUC_SUBMISSION_PREFERRED : GUC_SUBMISSION_DISABLED;
 
 	if (!HAS_GUC_UCODE(dev)) {
 		fw_path = NULL;
drivers/gpu/drm/i915/intel_lrc.c +2 -2
index daf1279..960e676 100644
@@ -716,7 +716,7 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request
 
 	request->ringbuf = ce->ringbuf;
 
-	if (i915.enable_guc_submission) {
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
 		/*
 		 * Check that the GuC has space for the request before
 		 * going any further, as the i915_add_request() call
@@ -795,7 +795,7 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request
 	request->previous_context = engine->last_context;
 	engine->last_context = request->ctx;
 
-	if (i915.enable_guc_submission)
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED)
 		i915_guc_submit(request);
 	else
 		execlists_context_queue(request);
@@ -988,7 +988,7 @@ static int intel_lr_context_pin(struct i915_gem_context *ctx,
 	ce->state->dirty = true;
 
Quoted 7 lines

drivers/gpu/drm/i915/intel_lrc.c static int intel_lr_context_pin(struct i915_gem_context *ctx, · line 994

Quoted 6 lines
drivers/gpu/drm/i915/intel_lrc.c +1 -1
 	/* Invalidate GuC TLB. */
-	if (i915.enable_guc_submission)
+	if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED)
 		I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
 
 	i915_gem_context_get(ctx);

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#4 lore raw

Re: [PATCH v3 1/4] drm/i915/guc: symbolic names for GuC submission preferences

Quoted 11 lines · Dave Gordon
Quoted 9 lines · Jani Nikula

drivers/gpu/drm/i915/intel_guc_loader.c int intel_guc_setup(struct drm_device *dev) · line 526

Quoted 2 lines · Dave Gordon
drivers/gpu/drm/i915/intel_guc_loader.c +1 -1
-	} else if (i915.enable_guc_submission > 1) {
+	} else if (i915.enable_guc_submission >= GUC_SUBMISSION_MANDATORY) {

I like the patches in general, but now these >= and <= seem rather out of place. How about using == and != exclusively?

BR,
Jani.

Quoted 8 lines

That would leave us with undefined behaviour for values outside the recognised range. This way it clips out-of-range values to the nearest extremum. Of course we could make it fail completely for invalid values, but that's just really annoying for the developer or admin who's mistyped -1 as -2 or forgotten what the maximum supported value is in this release. Alternatively we could convert all out-of-range values to "system default" i.e. ignored, which might still be annoying but not quite as much.

I'm not a huge fan of making assumptions about what the user possibly meant when giving incorrect input, "as a convenience". It teaches the user to be sloppy about it, and might lead to super annoying surprises when we actually start using those values for something else.

Quoted 5 lines

Any other suggestions for how to handle out-of-range values?

But if we were changing the policy shouldn't that be a separate patch? This patch is supposed to change only the way the code is written, with no effect to existing behaviour!

Oh, completely agreed here, while I didn't spell this out in my first reply. This shouldn't block the patch.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH v3 1/4] drm/i915/guc: symbolic names for GuC submission preferences

In reply to Dave Gordon
Quoted 105 lines · Dave Gordon
Quoted 92 lines · Jani Nikula
Quoted 81 lines · Dave Gordon

The existing code that accesses the "enable_guc_submission" parameter uses explicit numerical values for the various possibilities, including in one case relying on boolean 0/1 mapping to specific values (which could be confusing for maintainers).

So this patch just provides and uses names for the values representing the DEFAULT, DISABLED, PREFERRED, and MANDATORY submission options that the user can select (-1, 0, 1, 2 respectively).

This should produce identical code to the previous version!

Cc Tvrtko Ursulin <[email protected]>
---
 drivers/gpu/drm/i915/i915_guc_submission.c |  2 +-
 drivers/gpu/drm/i915/intel_guc.h           |  6 ++++++
 drivers/gpu/drm/i915/intel_guc_loader.c    | 15 ++++++++-------
 drivers/gpu/drm/i915/intel_lrc.c           |  6 +++---
 4 files changed, 18 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -1
index 01c1c16..e564c976 100644
@@ -971,7 +971,7 @@ int i915_guc_submission_init(struct
 drm_i915_private *dev_priv)
     bitmap_clear(guc->doorbell_bitmap, 0, GUC_MAX_DOORBELLS);
     i915_guc_submission_disable(dev_priv);
 
-    if (!i915.enable_guc_submission)
+    if (i915.enable_guc_submission == GUC_SUBMISSION_DISABLED)
         return 0; /* not enabled  */
 
     if (guc->ctx_pool_obj)
drivers/gpu/drm/i915/intel_guc.h +6 -0
index 3e3e743..52ecbba 100644
@@ -90,6 +90,12 @@ struct i915_guc_client {
     uint64_t submissions[I915_NUM_ENGINES];
 };
 
+enum {
+    GUC_SUBMISSION_DEFAULT = -1,
+    GUC_SUBMISSION_DISABLED = 0,
+    GUC_SUBMISSION_PREFERRED,
+    GUC_SUBMISSION_MANDATORY
+};
 enum intel_guc_fw_status {
     GUC_FIRMWARE_FAIL = -1,
     GUC_FIRMWARE_NONE = 0,
drivers/gpu/drm/i915/intel_guc_loader.c +0 -0
index b883efd..d8bd4cb 100644
@@ -189,7 +189,7 @@ static void set_guc_init_params(struct
 drm_i915_private *dev_priv)
     }
 
     /* If GuC submission is enabled, set up additional parameters

here */

drivers/gpu/drm/i915/intel_guc_loader.c +2 -2
-    if (i915.enable_guc_submission) {
+    if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
         u32 pgs = i915_gem_obj_ggtt_offset(dev_priv->guc.ctx_pool_obj);
         u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
@@ -495,7 +495,7 @@ int intel_guc_setup(struct drm_device *dev)
         intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
         intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
 
-    if (i915.enable_guc_submission) {
+    if (i915.enable_guc_submission != GUC_SUBMISSION_DISABLED) {
         err = i915_guc_submission_enable(dev_priv);
         if (err)
             goto fail;

drivers/gpu/drm/i915/intel_guc_loader.c int intel_guc_setup(struct drm_device *dev) · line 527

Quoted 6 lines
drivers/gpu/drm/i915/intel_guc_loader.c +1 -1
@@ -523,7 +523,7 @@ int intel_guc_setup(struct drm_device *dev)
      */
     if (i915.enable_guc_loading > 1) {
         ret = -EIO;
-    } else if (i915.enable_guc_submission > 1) {
+    } else if (i915.enable_guc_submission >=
 GUC_SUBMISSION_MANDATORY) {

I like the patches in general, but now these >= and <= seem rather out of place. How about using == and != exclusively?

Quoted 2 lines

BR,
Jani.

That would leave us with undefined behaviour for values outside the recognised range. This way it clips out-of-range values to the nearest extremum. Of course we could make it fail completely for invalid values, but that's just really annoying for the developer or admin who's mistyped -1 as -2 or forgotten what the maximum supported value is in this release. Alternatively we could convert all out-of-range values to "system default" i.e. ignored, which might still be annoying but not quite as much.

Quoted 7 lines

Any other suggestions for how to handle out-of-range values?

But if we were changing the policy shouldn't that be a separate patch? This patch is supposed to change only the way the code is written, with no effect to existing behaviour!

.Dave.

Also, if you look ahead to the next patch, you'll see there's a big explanatory comment about the use of signed and ordered enums:

+/*
+ * These signed ranges represent user-requested preferences.
+ * Out-of-range values from the user will be clipped towards
+ * zero: any negative value is treated as -1, anything over 2
+ * is just 2. ANY user-supplied value also taints the kernel.
+ */
enum {
GUC_SUBMISSION_DEFAULT = -1, GUC_SUBMISSION_DISABLED = 0, GUC_SUBMISSION_PREFERRED, GUC_SUBMISSION_MANDATORY
};
+enum {

+       FIRMWARE_LOAD_DEFAULT = -1,
+       FIRMWARE_LOAD_DISABLED = 0,
+       FIRMWARE_LOAD_PREFERRED,
+       FIRMWARE_LOAD_MANDATORY

+};
+
+/* These represent the actual firmware status */
enum intel_guc_fw_status {
GUC_FIRMWARE_FAIL = -1, GUC_FIRMWARE_NONE = 0,

.Dave.

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

PATCH v3 2/4 drm/i915/guc: symbolic names for GuC firmare loading preferences

In reply to Dave Gordon

The existing code that accesses the "enable_guc_loading" parameter uses explicit numerical values for the various possibilities, including in one case relying on boolean 0/1 mapping to specific values (which could be confusing for maintainers).

So this patch just provides and uses names for the values representing the DEFAULT, DISABLED, PREFERRED, and MANDATORY options that the user can select (-1, 0, 1, 2 respectively).

This should produce identical code to the previous version!

Cc Tvrtko Ursulin <[email protected]>
---
 drivers/gpu/drm/i915/intel_guc.h        | 14 ++++++++++++++
 drivers/gpu/drm/i915/intel_guc_loader.c | 13 +++++++------
 2 files changed, 21 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_guc.h +14 -0
index 52ecbba..4963522 100644
@@ -90,12 +90,26 @@ struct i915_guc_client {
 	uint64_t submissions[I915_NUM_ENGINES];
 };
 
+/*
+ * These signed ranges represent user-requested preferences.
+ * Out-of-range values from the user will be clipped towards
+ * zero: any negative value is treated as -1, anything over 2
+ * is just 2. ANY user-supplied value also taints the kernel.
+ */
 enum {
 	GUC_SUBMISSION_DEFAULT = -1,
 	GUC_SUBMISSION_DISABLED = 0,
 	GUC_SUBMISSION_PREFERRED,
 	GUC_SUBMISSION_MANDATORY
 };
+enum {
+	FIRMWARE_LOAD_DEFAULT = -1,
+	FIRMWARE_LOAD_DISABLED = 0,
+	FIRMWARE_LOAD_PREFERRED,
+	FIRMWARE_LOAD_MANDATORY
+};
+
+/* These represent the actual firmware status  */
 enum intel_guc_fw_status {
 	GUC_FIRMWARE_FAIL = -1,
 	GUC_FIRMWARE_NONE = 0,
drivers/gpu/drm/i915/intel_guc_loader.c +7 -6
index d8bd4cb..c2005b5 100644
@@ -426,7 +426,7 @@ int intel_guc_setup(struct drm_device *dev)
 		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
 
 	/* Loading forbidden, or no firmware to load? */
-	if (!i915.enable_guc_loading) {
+	if (i915.enable_guc_loading == FIRMWARE_LOAD_DISABLED) {
 		err = 0;
 		goto fail;
 	} else if (fw_path == NULL) {
@@ -521,7 +521,7 @@ int intel_guc_setup(struct drm_device *dev)
 	 * nonfatal error (i.e. it doesn't prevent driver load, but
 	 * marks the GPU as wedged until reset).
 	 */
-	if (i915.enable_guc_loading > 1) {
+	if (i915.enable_guc_loading >= FIRMWARE_LOAD_MANDATORY) {
 		ret = -EIO;
 	} else if (i915.enable_guc_submission >= GUC_SUBMISSION_MANDATORY) {
 		ret = -EIO;
@@ -687,9 +687,10 @@ void intel_guc_init(struct drm_device *dev)
 	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
 	const char *fw_path;
 
-	/* A negative value means "use platform default" */
-	if (i915.enable_guc_loading < 0)
-		i915.enable_guc_loading = HAS_GUC_UCODE(dev);
+	/* Any negative value means "use platform default" */
+	if (i915.enable_guc_loading <= FIRMWARE_LOAD_DEFAULT)
+		i915.enable_guc_loading = HAS_GUC_UCODE(dev) ?
+			FIRMWARE_LOAD_PREFERRED : FIRMWARE_LOAD_DISABLED;
 	if (i915.enable_guc_submission <= GUC_SUBMISSION_DEFAULT)
 		i915.enable_guc_submission = HAS_GUC_SCHED(dev) ?
 			GUC_SUBMISSION_PREFERRED : GUC_SUBMISSION_DISABLED;
@@ -718,7 +719,7 @@ void intel_guc_init(struct drm_device *dev)
 	guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE;
 
 	/* Early (and silent) return if GuC loading is disabled */
-	if (!i915.enable_guc_loading)
+	if (i915.enable_guc_loading == FIRMWARE_LOAD_DISABLED)
 		return;
 	if (fw_path == NULL)
 		return;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

PATCH v3 3/4 drm/i915/guc: symbolic name for GuC log-level none

In reply to Dave Gordon

The existing code that accesses the "guc_log_level" parameter uses an explicit numerical value for the "no logging" case, whereas there are symbolic names for the other levels.

So this patch just provides and uses a name for the default log level (NONE), with the same numeric value that is already used.

This should produce identical code to the previous version!

Cc Tvrtko Ursulin <[email protected]>
---
 drivers/gpu/drm/i915/i915_guc_submission.c | 2 +-
 drivers/gpu/drm/i915/intel_guc_fwif.h      | 1 +
 drivers/gpu/drm/i915/intel_guc_loader.c    | 2 +-
 3 files changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -1
index e564c976..112e755 100644
@@ -849,7 +849,7 @@ static void guc_create_log(struct intel_guc *guc)
 		obj = gem_allocate_guc_obj(dev_priv, size);
 		if (!obj) {
 			/* logging will be off */
-			i915.guc_log_level = -1;
+			i915.guc_log_level = GUC_LOG_VERBOSITY_NONE;
 			return;
 		}
 
drivers/gpu/drm/i915/intel_guc_fwif.h +1 -0
index 944786d..bd89f4e 100644
@@ -132,6 +132,7 @@
 #define   GUC_LOG_VERBOSITY_HIGH	(2 << GUC_LOG_VERBOSITY_SHIFT)
 #define   GUC_LOG_VERBOSITY_ULTRA	(3 << GUC_LOG_VERBOSITY_SHIFT)
 /* Verbosity range-check limits, without the shift */
+#define	  GUC_LOG_VERBOSITY_NONE	(-1)
 #define	  GUC_LOG_VERBOSITY_MIN		0
 #define	  GUC_LOG_VERBOSITY_MAX		3
 #define	  GUC_LOG_VERBOSITY_MASK	0x0000000f
drivers/gpu/drm/i915/intel_guc_loader.c +1 -1
index c2005b5..b9c9f15 100644
@@ -175,7 +175,7 @@ static void set_guc_init_params(struct drm_i915_private *dev_priv)
 	params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
 			GUC_CTL_VCS2_ENABLED;
 
-	if (i915.guc_log_level >= 0) {
+	if (i915.guc_log_level > GUC_LOG_VERBOSITY_NONE) {
 		params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
 		params[GUC_CTL_DEBUG] =
 			i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

PATCH v3 4/4 drm/i915/guc: use symbolic names in setting defaults for module parameters

In reply to Dave Gordon

Of course, this also re-enables GuC loading and submission by default on suitable platforms, since it's Intel's Plan of Record that GuC submission shall be used where available.

---
 drivers/gpu/drm/i915/i915_params.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_params.c +3 -3
index b6e404c..16ad975 100644
@@ -54,9 +54,9 @@ struct i915_params i915 __read_mostly = {
 	.verbose_state_checks = 1,
 	.nuclear_pageflip = 0,
 	.edp_vswing = 0,
-	.enable_guc_loading = 0,
-	.enable_guc_submission = 0,
-	.guc_log_level = -1,
+	.enable_guc_loading = FIRMWARE_LOAD_DEFAULT,
+	.enable_guc_submission = GUC_SUBMISSION_DEFAULT,
+	.guc_log_level = GUC_LOG_VERBOSITY_NONE,
 	.enable_dp_mst = true,
 	.inject_load_failure = 0,
 	.enable_dpcd_backlight = false,
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw

✗ Ro.CI.BAT: warning for drm/i915/guc: use symbolic names for module parameter values

In reply to Dave Gordon
== Series Details ==

== Series Details ==

Series: drm/i915/guc: use symbolic names for module parameter values
URL : https://patchwork.freedesktop.org/series/10188/
State : warning

== Summary ==

Series 10188v1 drm/i915/guc: use symbolic names for module parameter values
http://patchwork.freedesktop.org/api/1.0/series/10188/revisions/1/mbox

Test drv_module_reload_basic:

                pass       -> DMESG-WARN (ro-skl3-i5-6260u)
fi-hsw-i7-4770k  total:244  pass:216  dwarn:0   dfail:0   fail:8   skip:20 
fi-skl-i5-6260u  total:244  pass:224  dwarn:0   dfail:0   fail:8   skip:12 
fi-skl-i7-6700k  total:244  pass:210  dwarn:0   dfail:0   fail:8   skip:26 
fi-snb-i7-2600   total:244  pass:196  dwarn:0   dfail:0   fail:8   skip:40 
ro-bdw-i5-5250u  total:244  pass:219  dwarn:4   dfail:0   fail:8   skip:13 
ro-bdw-i7-5557U  total:244  pass:220  dwarn:3   dfail:0   fail:8   skip:13 
ro-bdw-i7-5600u  total:244  pass:204  dwarn:0   dfail:0   fail:8   skip:32 
ro-bsw-n3050     total:218  pass:173  dwarn:0   dfail:0   fail:2   skip:42 
ro-byt-n2820     total:244  pass:197  dwarn:0   dfail:0   fail:9   skip:38 
ro-hsw-i3-4010u  total:244  pass:212  dwarn:0   dfail:0   fail:8   skip:24 
ro-hsw-i7-4770r  total:244  pass:212  dwarn:0   dfail:0   fail:8   skip:24 
ro-ilk-i7-620lm  total:244  pass:172  dwarn:0   dfail:0   fail:9   skip:63 
ro-ilk1-i5-650   total:239  pass:172  dwarn:0   dfail:0   fail:9   skip:58 
ro-ivb-i7-3770   total:244  pass:203  dwarn:0   dfail:0   fail:8   skip:33 
ro-skl3-i5-6260u total:244  pass:223  dwarn:1   dfail:0   fail:8   skip:12 
ro-snb-i7-2620M  total:244  pass:193  dwarn:0   dfail:0   fail:9   skip:42 

fi-kbl-qkkr failed to connect after reboot

Results at /archive/results/CI_IGT_test/RO_Patchwork_1578/

7df4039 drm-intel-nightly: 2016y-07m-22d-09h-32m-51s UTC integration manifest 505bcb2 drm/i915/guc: use symbolic names in setting defaults for module parameters 9decbc0 drm/i915/guc: symbolic name for GuC log-level none
6f280db drm/i915/guc: symbolic names for GuC firmare loading preferences f5fa596 drm/i915/guc: symbolic names for GuC submission preferences

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx