drm/i915/guc: use symbolic names for module parameter values
Subsystems (2)
v4 cover drm/i915/guc: use symbolic names for module parameter values
There are various literal constants used in the GuC module-parameter processing code; this sequence of patches replaces them with symbolic names for greater clarity.
And then it re-enables GuC submission by default :)
v3:
Original patch broken into two (1/4 + 2/4)
Name for GuC log level NONE added (3/4
Re-enable GuC loading & submission (4/4)
Added cover letter
v4:
Additional final patch (5/5) to change treatment of unrecognised option values (ignore them rather than force them into range).
Dave Gordon (5):
drm/i915/guc: symbolic names for GuC submission preferences drm/i915/guc: symbolic names for GuC firmare loading preferences drm/i915/guc: symbolic name for GuC log-level none drm/i915/guc: use symbolic names in setting defaults for module drm/i915/guc: ignore unrecognised loading & submission options
drivers/gpu/drm/i915/i915_guc_submission.c | 4 +-- drivers/gpu/drm/i915/i915_params.c | 10 +++--- drivers/gpu/drm/i915/intel_guc.h | 20 +++++++++++ drivers/gpu/drm/i915/intel_guc_fwif.h | 1 + drivers/gpu/drm/i915/intel_guc_loader.c | 54 ++++++++++++++++++++++-------- drivers/gpu/drm/i915/intel_lrc.c | 4 +-- 6 files changed, 70 insertions(+), 23 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 1/5 drm/i915/guc: symbolic names for GuC submission preferences
The existing code that accesses the "enable_guc_submission" parameter uses explicit numerical values for the various possibilities, including in one case relying on boolean 0/1 mapping to specific values (which could be confusing for maintainers).
So this patch just provides and uses names for the values representing the DEFAULT, DISABLED, PREFERRED, and MANDATORY submission options that the user can select (-1, 0, 1, 2 respectively).
This should produce identical code to the previous version!
--- drivers/gpu/drm/i915/i915_guc_submission.c | 2 +- drivers/gpu/drm/i915/intel_guc.h | 6 ++++++ drivers/gpu/drm/i915/intel_guc_loader.c | 15 ++++++++------- drivers/gpu/drm/i915/intel_lrc.c | 4 ++-- 4 files changed, 17 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -1
@@ -969,7 +969,7 @@ int i915_guc_submission_init(struct drm_i915_private *dev_priv)bitmap_clear (guc->doorbell_bitmap,0 ,GUC_MAX_DOORBELLS );i915_guc_submission_disable (dev_priv); -if (!i915.enable_guc_submission) +if (i915.enable_guc_submission ==GUC_SUBMISSION_DISABLED )return 0 ;/* not enabled */ if (guc->ctx_pool_obj)
drivers/gpu/drm/i915/intel_guc.h +6 -0
@@ -90,6 +90,12 @@ struct i915_guc_client {uint64_t submissions[I915_NUM_ENGINES ]; }; +enum { +GUC_SUBMISSION_DEFAULT =-1 , +GUC_SUBMISSION_DISABLED =0 , +GUC_SUBMISSION_PREFERRED , +GUC_SUBMISSION_MANDATORY +};enum intel_guc_fw_status {GUC_FIRMWARE_FAIL =-1 ,GUC_FIRMWARE_NONE =0 ,
drivers/gpu/drm/i915/intel_guc_loader.c +8 -7
@@ -189,7 +189,7 @@ static void set_guc_init_params(struct drm_i915_private *dev_priv) }/* If GuC submission is enabled, set up additional parameters here */ -if (i915.enable_guc_submission) { +if (i915.enable_guc_submission !=GUC_SUBMISSION_DISABLED ) {u32 pgs =i915_gem_obj_ggtt_offset (dev_priv->guc.ctx_pool_obj);u32 ctx_in_16 =GUC_MAX_GPU_CONTEXTS /16 ;
@@ -495,7 +495,7 @@ int intel_guc_setup(struct drm_device *dev)intel_guc_fw_status_repr (guc_fw->guc_fw_fetch_status), intel_guc_fw_status_repr(guc_fw->guc_fw_load_status)); -if (i915.enable_guc_submission) { +if (i915.enable_guc_submission !=GUC_SUBMISSION_DISABLED ) { err =i915_guc_submission_enable (dev_priv);if (err) goto fail;
@@ -523,7 +523,7 @@ int intel_guc_setup(struct drm_device *dev)*/ if (i915.enable_guc_loading >1 ) { ret = -EIO ; - }else if (i915.enable_guc_submission >1 ) { + }else if (i915.enable_guc_submission >=GUC_SUBMISSION_MANDATORY ) { ret = -EIO ; }else { ret =0 ;
@@ -538,7 +538,7 @@ int intel_guc_setup(struct drm_device *dev)else DRM_ERROR ("GuC firmware load failed: %d\n" , err); -if (i915.enable_guc_submission) { +if (i915.enable_guc_submission !=GUC_SUBMISSION_DISABLED ) {if (fw_path ==NULL )DRM_INFO ("GuC submission without firmware not supported\n" );if (ret ==0 )
@@ -546,7 +546,7 @@ int intel_guc_setup(struct drm_device *dev)else DRM_ERROR ("GuC init failed: %d\n" , ret); } - i915.enable_guc_submission =0 ; + i915.enable_guc_submission =GUC_SUBMISSION_DISABLED ;return ret; }
@@ -690,8 +690,9 @@ void intel_guc_init(struct drm_device *dev)/* A negative value means "use platform default" */ if (i915.enable_guc_loading <0 ) i915.enable_guc_loading =HAS_GUC_UCODE (dev); -if (i915.enable_guc_submission <0 ) - i915.enable_guc_submission =HAS_GUC_SCHED (dev); +if (i915.enable_guc_submission <=GUC_SUBMISSION_DEFAULT ) + i915.enable_guc_submission =HAS_GUC_SCHED (dev) ? +GUC_SUBMISSION_PREFERRED :GUC_SUBMISSION_DISABLED ;if (!HAS_GUC_UCODE (dev)) { fw_path =NULL ;
drivers/gpu/drm/i915/intel_lrc.c +2 -2
@@ -662,7 +662,7 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request request->ring = ce->ring; -if (i915.enable_guc_submission) { +if (i915.enable_guc_submission !=GUC_SUBMISSION_DISABLED ) {/* * Check that the GuC has space for the request before * going any further, as the i915_add_request() call
@@ -800,7 +800,7 @@ static int intel_lr_context_pin(struct i915_gem_context *ctx, ce->state->dirty = true;/* Invalidate GuC TLB. */ -if (i915.enable_guc_submission) +if (i915.enable_guc_submission !=GUC_SUBMISSION_DISABLED )I915_WRITE (GEN8_GTCR ,GEN8_GTCR_INVALIDATE );i915_gem_context_get (ctx);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 2/5 drm/i915/guc: symbolic names for GuC firmare loading preferences
In reply to Dave GordonThe existing code that accesses the "enable_guc_loading" parameter uses explicit numerical values for the various possibilities, including in one case relying on boolean 0/1 mapping to specific values (which could be confusing for maintainers).
So this patch just provides and uses names for the values representing the DEFAULT, DISABLED, PREFERRED, and MANDATORY options that the user can select (-1, 0, 1, 2 respectively).
This should produce identical code to the previous version!
--- drivers/gpu/drm/i915/intel_guc.h | 14 ++++++++++++++ drivers/gpu/drm/i915/intel_guc_loader.c | 13 +++++++------ 2 files changed, 21 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_guc.h +14 -0
@@ -90,12 +90,26 @@ struct i915_guc_client {uint64_t submissions[I915_NUM_ENGINES ]; }; +/* +* These signed ranges represent user-requested preferences. +* Out-of-range values from the user will be clipped towards +* zero: any negative value is treated as -1, anything over 2 +* is just 2. ANY user-supplied value also taints the kernel. +*/ enum {GUC_SUBMISSION_DEFAULT =-1 ,GUC_SUBMISSION_DISABLED =0 ,GUC_SUBMISSION_PREFERRED ,GUC_SUBMISSION_MANDATORY }; +enum { +FIRMWARE_LOAD_DEFAULT =-1 , +FIRMWARE_LOAD_DISABLED =0 , +FIRMWARE_LOAD_PREFERRED , +FIRMWARE_LOAD_MANDATORY +}; + +/* These represent the actual firmware status */ enum intel_guc_fw_status {GUC_FIRMWARE_FAIL =-1 ,GUC_FIRMWARE_NONE =0 ,
drivers/gpu/drm/i915/intel_guc_loader.c +7 -6
@@ -426,7 +426,7 @@ int intel_guc_setup(struct drm_device *dev) intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));/* Loading forbidden, or no firmware to load? */ -if (!i915.enable_guc_loading) { +if (i915.enable_guc_loading ==FIRMWARE_LOAD_DISABLED ) { err =0 ; goto fail; }else if (fw_path ==NULL ) {
@@ -521,7 +521,7 @@ int intel_guc_setup(struct drm_device *dev)* nonfatal error (i.e. it doesn't prevent driver load, but * marks the GPU as wedged until reset). */ -if (i915.enable_guc_loading >1 ) { +if (i915.enable_guc_loading >=FIRMWARE_LOAD_MANDATORY ) { ret = -EIO ; }else if (i915.enable_guc_submission >=GUC_SUBMISSION_MANDATORY ) { ret = -EIO ;
@@ -687,9 +687,10 @@ void intel_guc_init(struct drm_device *dev)struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;const char *fw_path; -/* A negative value means "use platform default" */ -if (i915.enable_guc_loading <0 ) - i915.enable_guc_loading =HAS_GUC_UCODE (dev); +/* Any negative value means "use platform default" */ +if (i915.enable_guc_loading <=FIRMWARE_LOAD_DEFAULT ) + i915.enable_guc_loading =HAS_GUC_UCODE (dev) ? +FIRMWARE_LOAD_PREFERRED :FIRMWARE_LOAD_DISABLED ;if (i915.enable_guc_submission <=GUC_SUBMISSION_DEFAULT ) i915.enable_guc_submission =HAS_GUC_SCHED (dev) ?GUC_SUBMISSION_PREFERRED :GUC_SUBMISSION_DISABLED ;
@@ -718,7 +719,7 @@ void intel_guc_init(struct drm_device *dev) guc_fw->guc_fw_load_status =GUC_FIRMWARE_NONE ;/* Early (and silent) return if GuC loading is disabled */ -if (!i915.enable_guc_loading) +if (i915.enable_guc_loading ==FIRMWARE_LOAD_DISABLED )return ;if (fw_path ==NULL )return ;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 3/5 drm/i915/guc: symbolic name for GuC log-level none
In reply to Dave GordonThe existing code that accesses the "guc_log_level" parameter uses an explicit numerical value for the "no logging" case, whereas there are symbolic names for the other levels.
So this patch just provides and uses a name for the default log level (NONE), with the same numeric value that is already used.
This should produce identical code to the previous version!
--- drivers/gpu/drm/i915/i915_guc_submission.c | 2 +- drivers/gpu/drm/i915/intel_guc_fwif.h | 1 + drivers/gpu/drm/i915/intel_guc_loader.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_guc_submission.c +1 -1
@@ -847,7 +847,7 @@ static void guc_create_log(struct intel_guc *guc) obj =gem_allocate_guc_obj (dev_priv, size);if (!obj) {/* logging will be off */ - i915.guc_log_level =-1 ; + i915.guc_log_level =GUC_LOG_VERBOSITY_NONE ;return ; }
drivers/gpu/drm/i915/intel_guc_fwif.h +1 -0
@@ -132,6 +132,7 @@#define GUC_LOG_VERBOSITY_HIGH (2 << GUC_LOG_VERBOSITY_SHIFT)#define GUC_LOG_VERBOSITY_ULTRA (3 << GUC_LOG_VERBOSITY_SHIFT)/* Verbosity range-check limits, without the shift */ +#define GUC_LOG_VERBOSITY_NONE (-1)#define GUC_LOG_VERBOSITY_MIN 0#define GUC_LOG_VERBOSITY_MAX 3#define GUC_LOG_VERBOSITY_MASK 0x0000000f
drivers/gpu/drm/i915/intel_guc_loader.c +1 -1
@@ -175,7 +175,7 @@ static void set_guc_init_params(struct drm_i915_private *dev_priv) params[GUC_CTL_FEATURE ] |=GUC_CTL_DISABLE_SCHEDULER |GUC_CTL_VCS2_ENABLED ; -if (i915.guc_log_level >=0 ) { +if (i915.guc_log_level >GUC_LOG_VERBOSITY_NONE ) { params[GUC_CTL_LOG_PARAMS ] = guc->log_flags; params[GUC_CTL_DEBUG ] = i915.guc_log_level <<GUC_LOG_VERBOSITY_SHIFT ;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 4/5 drm/i915/guc: use symbolic names in setting defaults for module parameters
In reply to Dave GordonOf course, this also re-enables GuC loading and submission by default on suitable platforms, since it's Intel's Plan of Record that GuC submission shall be used where available.
--- drivers/gpu/drm/i915/i915_params.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_params.c +5 -5
@@ -54,9 +54,9 @@ struct i915_params i915 __read_mostly = { .verbose_state_checks = 1, .nuclear_pageflip = 0, .edp_vswing = 0, - .enable_guc_loading = 0, - .enable_guc_submission = 0, - .guc_log_level = -1, + .enable_guc_loading = FIRMWARE_LOAD_DEFAULT, + .enable_guc_submission = GUC_SUBMISSION_DEFAULT, + .guc_log_level = GUC_LOG_VERBOSITY_NONE, .enable_dp_mst = true, .inject_load_failure = 0, .enable_dpcd_backlight = false,
@@ -203,12 +203,12 @@ struct i915_params i915 __read_mostly = {module_param_named_unsafe (enable_guc_loading, i915.enable_guc_loading, int,0400 );MODULE_PARM_DESC (enable_guc_loading,"Enable GuC firmware loading " -"(-1=auto, 0=never [default], 1=if available, 2=required)" ); +"(-1=auto [default], 0=never, 1=if available, 2=required)" );module_param_named_unsafe (enable_guc_submission, i915.enable_guc_submission, int,0400 );MODULE_PARM_DESC (enable_guc_submission,"Enable GuC submission " -"(-1=auto, 0=never [default], 1=if available, 2=required)" ); +"(-1=auto [default], 0=never, 1=if available, 2=required)" );module_param_named (guc_log_level, i915.guc_log_level, int,0400 ); MODULE_PARM_DESC(guc_log_level,
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 5/5 drm/i915/guc: ignore unrecognised loading & submission options
In reply to Dave GordonPreviously the code allowed *any* values for the enable_guc_loading and enable_guc_submission parameters, and forced them into range by clipping at each extremum. This version instead ignores unknown values, treating them as DEFAULT (which then gets converted to DISABLED or PREFERRED).
Of course we also have to report that we've ignored unknown values so that the administrator or developer knows the kernel command line wasn't sensible!
--- drivers/gpu/drm/i915/intel_guc.h | 8 ++++---- drivers/gpu/drm/i915/intel_guc_loader.c | 34 ++++++++++++++++++++++++++++----- 2 files changed, 33 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/intel_guc.h +4 -4
@@ -91,10 +91,10 @@ struct i915_guc_client { };/* -* These signed ranges represent user-requested preferences. -* Out-of-range values from the user will be clipped towards -* zero: any negative value is treated as -1, anything over 2 -* is just 2. ANY user-supplied value also taints the kernel. +* These values represent user-requested preferences; any other value will be +* treated as DEFAULT, so the driver will then choose an appropriate value. +* +* ANY user-supplied value (even DEFAULT) also taints the kernel. */ enum {GUC_SUBMISSION_DEFAULT =-1 ,
drivers/gpu/drm/i915/intel_guc_loader.c +29 -5
@@ -521,9 +521,9 @@ int intel_guc_setup(struct drm_device *dev)* nonfatal error (i.e. it doesn't prevent driver load, but * marks the GPU as wedged until reset). */ -if (i915.enable_guc_loading >=FIRMWARE_LOAD_MANDATORY ) { +if (i915.enable_guc_loading ==FIRMWARE_LOAD_MANDATORY ) { ret = -EIO ; - }else if (i915.enable_guc_submission >=GUC_SUBMISSION_MANDATORY ) { + }else if (i915.enable_guc_submission ==GUC_SUBMISSION_MANDATORY ) { ret = -EIO ; }else { ret =0 ;
@@ -687,13 +687,37 @@ void intel_guc_init(struct drm_device *dev)struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;const char *fw_path; -/* Any negative value means "use platform default" */ -if (i915.enable_guc_loading <=FIRMWARE_LOAD_DEFAULT ) +/* Sanitise user-specified options */ +switch (i915.enable_guc_loading) { +case FIRMWARE_LOAD_DISABLED : +case FIRMWARE_LOAD_PREFERRED : +case FIRMWARE_LOAD_MANDATORY : +break ; + +default : +DRM_INFO ("ignoring unknown value %d for 'enable_guc_loading'\n" , + i915.enable_guc_loading); +/*FALLTHRU*/ +case FIRMWARE_LOAD_DEFAULT : i915.enable_guc_loading =HAS_GUC_UCODE (dev) ?FIRMWARE_LOAD_PREFERRED :FIRMWARE_LOAD_DISABLED ; -if (i915.enable_guc_submission <=GUC_SUBMISSION_DEFAULT ) +break ; + } + +switch (i915.enable_guc_submission) { +case GUC_SUBMISSION_DISABLED : +case GUC_SUBMISSION_PREFERRED : +case GUC_SUBMISSION_MANDATORY : +break ; + +default : +DRM_INFO ("ignoring unknown value %d for 'enable_guc_submission'\n" , + i915.enable_guc_submission); +/*FALLTHRU*/ +case GUC_SUBMISSION_DEFAULT : i915.enable_guc_submission =HAS_GUC_SCHED (dev) ?GUC_SUBMISSION_PREFERRED :GUC_SUBMISSION_DISABLED ; + }if (!HAS_GUC_UCODE (dev)) { fw_path =NULL ;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Ro.CI.BAT: warning for drm/i915/guc: use symbolic names for module parameter values (rev2)
In reply to Dave Gordon== Series Details ==
== Series Details ==
Series: drm/i915/guc: use symbolic names for module parameter values (rev2)
URL : https://patchwork.freedesktop.org/series/10188/
State : warning
== Summary ==
Series 10188v2 drm/i915/guc: use symbolic names for module parameter values
http://patchwork.freedesktop.org/api/1.0/series/10188/revisions/2/mbox
Test drv_module_reload_basic:
pass -> DMESG-WARN (fi-hsw-i7-4770k)
pass -> DMESG-WARN (ro-skl3-i5-6260u)fi-hsw-i7-4770k total:107 pass:90 dwarn:1 dfail:0 fail:0 skip:15 fi-kbl-qkkr total:107 pass:83 dwarn:1 dfail:0 fail:0 skip:22 fi-skl-i5-6260u total:107 pass:98 dwarn:0 dfail:0 fail:0 skip:8 fi-skl-i7-6700k total:107 pass:84 dwarn:0 dfail:0 fail:0 skip:22 fi-snb-i7-2600 total:107 pass:77 dwarn:0 dfail:0 fail:0 skip:29 ro-bdw-i5-5250u total:107 pass:97 dwarn:0 dfail:0 fail:0 skip:9 ro-bdw-i7-5557U total:107 pass:97 dwarn:0 dfail:0 fail:0 skip:9 ro-bdw-i7-5600u total:107 pass:79 dwarn:0 dfail:0 fail:0 skip:27 ro-bsw-n3050 total:240 pass:194 dwarn:0 dfail:0 fail:4 skip:42 ro-byt-n2820 total:240 pass:197 dwarn:0 dfail:0 fail:3 skip:40 ro-hsw-i3-4010u total:107 pass:87 dwarn:0 dfail:0 fail:0 skip:19 ro-ilk1-i5-650 total:235 pass:173 dwarn:0 dfail:0 fail:2 skip:60 ro-ivb-i7-3770 total:107 pass:80 dwarn:0 dfail:0 fail:0 skip:26 ro-skl3-i5-6260u total:107 pass:97 dwarn:1 dfail:0 fail:0 skip:8
ro-hsw-i7-4770r failed to connect after reboot
ro-ivb2-i7-3770 failed to connect after reboot
Results at /archive/results/CI_IGT_test/RO_Patchwork_1777/
e220d47 drm-intel-nightly: 2016y-08m-09d-09h-18m-12s UTC integration manifest c47d6cf drm/i915/guc: ignore unrecognised loading & submission options 32f71df drm/i915/guc: use symbolic names in setting defaults for module parameters 449ee3e drm/i915/guc: symbolic name for GuC log-level none
ec2cf78 drm/i915/guc: symbolic names for GuC firmare loading preferences 1a3ec82 drm/i915/guc: symbolic names for GuC submission preferences
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Ro.CI.BAT: warning for drm/i915/guc: use symbolic names for module parameter values (rev2)
Quoted 6 lines · Patchwork
== Series Details ==
Series: drm/i915/guc: use symbolic names for module parameter values (rev2)
URL : https://patchwork.freedesktop.org/series/10188/
State : warning
Quoted 7 lines
== Summary ==
Series 10188v2 drm/i915/guc: use symbolic names for module parameter values
http://patchwork.freedesktop.org/api/1.0/series/10188/revisions/2/mboxTest
drv_module_reload_basic:pass -> DMESG-WARN (fi-hsw-i7-4770k)
The RCU-related recursive locking already mentioned by Ville, and under investigation elsewhere.
Quoted 1 line
pass -> DMESG-WARN (ro-skl3-i5-6260u)
This machine is missing (the correct version of) the GuC firmware!
.Dave.
Quoted 17 lines
fi-hsw-i7-4770k total:107 pass:90 dwarn:1 dfail:0 fail:0 skip:15 fi-kbl-qkkr total:107 pass:83 dwarn:1 dfail:0 fail:0 skip:22 fi-skl-i5-6260u total:107 pass:98 dwarn:0 dfail:0 fail:0 skip:8 fi-skl-i7-6700k total:107 pass:84 dwarn:0 dfail:0 fail:0 skip:22 fi-snb-i7-2600 total:107 pass:77 dwarn:0 dfail:0 fail:0 skip:29 ro-bdw-i5-5250u total:107 pass:97 dwarn:0 dfail:0 fail:0 skip:9 ro-bdw-i7-5557U total:107 pass:97 dwarn:0 dfail:0 fail:0 skip:9 ro-bdw-i7-5600u total:107 pass:79 dwarn:0 dfail:0 fail:0 skip:27 ro-bsw-n3050 total:240 pass:194 dwarn:0 dfail:0 fail:4 skip:42 ro-byt-n2820 total:240 pass:197 dwarn:0 dfail:0 fail:3 skip:40 ro-hsw-i3-4010u total:107 pass:87 dwarn:0 dfail:0 fail:0 skip:19 ro-ilk1-i5-650 total:235 pass:173 dwarn:0 dfail:0 fail:2 skip:60 ro-ivb-i7-3770 total:107 pass:80 dwarn:0 dfail:0 fail:0 skip:26 ro-skl3-i5-6260u total:107 pass:97 dwarn:1 dfail:0 fail:0 skip:8ro-hsw-i7-4770r failed to connect after reboot
ro-ivb2-i7-3770 failed to connect after reboot
Quoted 9 lines
Results at /archive/results/CI_IGT_test/RO_Patchwork_1777/
e220d47 drm-intel-nightly: 2016y-08m-09d-09h-18m-12s UTC integration manifest c47d6cf drm/i915/guc: ignore unrecognised loading & submission options 32f71df drm/i915/guc: use symbolic names in setting defaults for module parameters 449ee3e drm/i915/guc: symbolic name for GuC log-level none
ec2cf78 drm/i915/guc: symbolic names for GuC firmare loading preferences 1a3ec82 drm/i915/guc: symbolic names for GuC submission preferences
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Ro.CI.BAT: failure for drm/i915/guc: use symbolic names for module parameter values (rev2)
In reply to Dave Gordon== Series Details ==
== Series Details ==
Series: drm/i915/guc: use symbolic names for module parameter values (rev2)
URL : https://patchwork.freedesktop.org/series/10188/
State : failure
== Summary ==
Series 10188v2 drm/i915/guc: use symbolic names for module parameter values
http://patchwork.freedesktop.org/api/1.0/series/10188/revisions/2/mbox
Test drv_module_reload_basic:
pass -> DMESG-WARN (ro-skl3-i5-6260u)
pass -> SKIP (ro-bdw-i5-5250u)
Test kms_cursor_legacy:
Subgroup basic-flip-vs-cursor-legacy:
pass -> FAIL (ro-byt-n2820)
pass -> FAIL (fi-hsw-i7-4770k)
pass -> FAIL (ro-bdw-i5-5250u)
Subgroup basic-flip-vs-cursor-varying-size:
pass -> FAIL (ro-skl3-i5-6260u)
pass -> FAIL (ro-bdw-i5-5250u)
Test kms_pipe_crc_basic:
Subgroup read-crc-pipe-c-frame-sequence:
fail -> PASS (ro-ivb-i7-3770)
Subgroup suspend-read-crc-pipe-c:
dmesg-warn -> PASS (ro-bdw-i7-5600u)fi-hsw-i7-4770k total:201 pass:179 dwarn:0 dfail:0 fail:1 skip:20 fi-kbl-qkkr total:244 pass:186 dwarn:29 dfail:0 fail:2 skip:27 fi-skl-i5-6260u total:244 pass:224 dwarn:4 dfail:0 fail:2 skip:14 fi-skl-i7-6700k total:107 pass:84 dwarn:0 dfail:0 fail:0 skip:22 fi-snb-i7-2600 total:244 pass:202 dwarn:0 dfail:0 fail:0 skip:42 ro-bdw-i5-5250u total:240 pass:217 dwarn:2 dfail:0 fail:2 skip:19 ro-bdw-i7-5557U total:240 pass:219 dwarn:1 dfail:0 fail:1 skip:19 ro-bdw-i7-5600u total:240 pass:207 dwarn:0 dfail:0 fail:1 skip:32 ro-bsw-n3050 total:240 pass:194 dwarn:0 dfail:0 fail:4 skip:42 ro-byt-n2820 total:240 pass:197 dwarn:0 dfail:0 fail:3 skip:40 ro-hsw-i3-4010u total:240 pass:214 dwarn:0 dfail:0 fail:0 skip:26 ro-hsw-i7-4770r total:240 pass:214 dwarn:0 dfail:0 fail:0 skip:26 ro-ilk1-i5-650 total:235 pass:173 dwarn:0 dfail:0 fail:2 skip:60 ro-ivb-i7-3770 total:240 pass:205 dwarn:0 dfail:0 fail:0 skip:35 ro-ivb2-i7-3770 total:240 pass:209 dwarn:0 dfail:0 fail:0 skip:31 ro-skl3-i5-6260u total:240 pass:222 dwarn:1 dfail:0 fail:3 skip:14
Results at /archive/results/CI_IGT_test/RO_Patchwork_1792/
d0e3a4b drm-intel-nightly: 2016y-08m-09d-20h-18m-38s UTC integration manifest d74850c drm/i915/guc: ignore unrecognised loading & submission options 1d2e495 drm/i915/guc: use symbolic names in setting defaults for module parameters c336a5b drm/i915/guc: symbolic name for GuC log-level none
305708f drm/i915/guc: symbolic names for GuC firmare loading preferences 6108dd2 drm/i915/guc: symbolic names for GuC submission preferences
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx