mmc: sdhci-msm: Add clk-rates, DDR, HS400 support

index b904c33..1b3e8d2 100644
@@ -173,6 +173,7 @@ struct clk_rcg2 {
 #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr)
 
 extern const struct clk_ops clk_rcg2_ops;
+extern const struct clk_ops clk_rcg2_floor_ops;
 extern const struct clk_ops clk_rcg2_shared_ops;
 extern const struct clk_ops clk_edp_pixel_ops;
 extern const struct clk_ops clk_byte_ops;

133 lines not on this page · raw message

index 94569f4..cfab7b4 100644
@@ -46,6 +46,22 @@ struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate)
 }
 EXPORT_SYMBOL_GPL(qcom_find_freq);
 
+const struct freq_tbl *qcom_find_freq_floor(const struct freq_tbl *f,
+					    unsigned long rate)
+{
+	const struct freq_tbl *best = NULL;
+
+	for ( ; f->freq; f++) {
+		if (rate >= f->freq)
+			best = f;
+		else
+			break;
+	}
+
+	return best;
+}
+EXPORT_SYMBOL_GPL(qcom_find_freq_floor);
+
 int qcom_find_src_index(struct clk_hw *hw, const struct parent_map *map, u8 src)
 {
 	int i, num_parents = clk_hw_get_num_parents(hw);

index 9fb5b8e..23c1927 100644
@@ -41,6 +41,8 @@ struct qcom_cc_desc {
 
 extern const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f,
 					     unsigned long rate);
+extern const struct freq_tbl *qcom_find_freq_floor(const struct freq_tbl *f,
+						   unsigned long rate);
 extern void
 qcom_pll_set_fsm_mode(struct regmap *m, u32 reg, u8 bias_count, u8 lock_count);
 extern int qcom_find_src_index(struct clk_hw *hw, const struct parent_map *map,

index 070037a..486d961 100644
@@ -1142,7 +1142,7 @@ enum {
 		.name = "sdcc1_apps_clk_src",
 		.parent_names = gcc_xo_gpll0_gpll4,
 		.num_parents = 3,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -1156,7 +1156,7 @@ enum {
 		.name = "sdcc2_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -1170,7 +1170,7 @@ enum {
 		.name = "sdcc3_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -1184,7 +1184,7 @@ enum {
 		.name = "sdcc4_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

index 5c4e193..628e6ca 100644
@@ -1107,7 +1107,7 @@ enum {
 		.name = "sdcc1_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -1132,7 +1132,7 @@ enum {
 		.name = "sdcc2_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

index 0091520..348e30d 100644
@@ -872,7 +872,7 @@ enum {
 	.name = "sdcc1_apps_clk_src",
 	.parent_names = gcc_xo_gpll0,
 	.num_parents = 2,
-	.ops = &clk_rcg2_ops,
+	.ops = &clk_rcg2_floor_ops,
 };
 
 static struct clk_rcg2 sdcc1_apps_clk_src = {

@@ -894,7 +894,7 @@ enum {
 		.name = "sdcc2_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -908,7 +908,7 @@ enum {
 		.name = "sdcc3_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -922,7 +922,7 @@ enum {
 		.name = "sdcc4_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

index 84093c1..8afd830 100644
@@ -912,7 +912,7 @@ enum {
 		.name = "sdcc1_apps_clk_src",
 		.parent_names = gcc_xo_gpll0_gpll4,
 		.num_parents = 3,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -938,7 +938,7 @@ enum {
 		.name = "sdcc2_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -953,7 +953,7 @@ enum {
 		.name = "sdcc3_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -968,7 +968,7 @@ enum {
 		.name = "sdcc4_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

index e22bbc2..4b1fc17 100644
@@ -460,7 +460,7 @@ enum {
 		.name = "sdcc1_apps_clk_src",
 		.parent_names = gcc_xo_gpll0_gpll4_gpll0_early_div,
 		.num_parents = 4,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -505,7 +505,7 @@ enum {
 		.name = "sdcc2_apps_clk_src",
 		.parent_names = gcc_xo_gpll0_gpll4,
 		.num_parents = 3,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -519,7 +519,7 @@ enum {
 		.name = "sdcc3_apps_clk_src",
 		.parent_names = gcc_xo_gpll0_gpll4,
 		.num_parents = 3,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

@@ -543,7 +543,7 @@ enum {
 		.name = "sdcc4_apps_clk_src",
 		.parent_names = gcc_xo_gpll0,
 		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 

index 2dcbeb0..7e72105 100644
@@ -59,6 +59,10 @@
 #define CORE_DLL_CONFIG		0x100
 #define CORE_DLL_STATUS		0x108
 
+#define CORE_DLL_CONFIG_2	0x1b4
+#define CORE_FLL_CYCLE_CNT	BIT(18)
+#define CORE_DLL_CLOCK_DISABLE	BIT(21)
+
 #define CORE_VENDOR_SPEC	0x10c
 #define CORE_CLK_PWRSAVE	BIT(1)
 

@@ -77,7 +81,9 @@ struct sdhci_msm_host {
 	struct clk *clk;	/* main SD/MMC bus clock */
 	struct clk *pclk;	/* SDHC peripheral bus clock */
 	struct clk *bus_clk;	/* SDHC bus voter clock */
+	struct clk *xo_clk;	/* TCXO clk needed for FLL feature of cm_dll*/
 	struct mmc_host *mmc;
+	bool use_14lpp_dll_reset;
 };
 
 /* Platform specific tuning */

@@ -305,6 +311,8 @@ static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
 static int msm_init_cm_dll(struct sdhci_host *host)
 {
 	struct mmc_host *mmc = host->mmc;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 	int wait_cnt = 50;
 	unsigned long flags;
 	u32 config;

@@ -320,6 +328,16 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	config &= ~CORE_CLK_PWRSAVE;
 	writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
 
+	if (msm_host->use_14lpp_dll_reset) {
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+		config &= ~CORE_CK_OUT_EN;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config |= CORE_DLL_CLOCK_DISABLE;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
+	}
+
 	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
 	config |= CORE_DLL_RST;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);

@@ -329,6 +347,28 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 	msm_cm_dll_set_freq(host);
 
+	if (msm_host->use_14lpp_dll_reset &&
+	    !IS_ERR_OR_NULL(msm_host->xo_clk)) {
+		u32 mclk_freq = 0;
+
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config &= CORE_FLL_CYCLE_CNT;
+		if (config)
+			mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 8),
+					clk_get_rate(msm_host->xo_clk));
+		else
+			mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 4),
+					clk_get_rate(msm_host->xo_clk));
+
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config &= ~(0xFF << 10);
+		config |= mclk_freq << 10;
+
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
+		/* wait for 5us before enabling DLL clock */
+		udelay(5);
+	}
+
 	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
 	config &= ~CORE_DLL_RST;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);

@@ -337,6 +377,13 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	config &= ~CORE_DLL_PDN;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
+	if (msm_host->use_14lpp_dll_reset) {
+		msm_cm_dll_set_freq(host);
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config &= ~CORE_DLL_CLOCK_DISABLE;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
+	}
+
 	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
 	config |= CORE_DLL_EN;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);

@@ -590,6 +637,16 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		goto pclk_disable;
 	}
 
+	/*
+	 * xo_clock is needed for FLL feature of cm_dll.
+	 * In case if xo_clock is not mentioned in DT, warn and proceed.
+	 */
+	msm_host->xo_clk = devm_clk_get(&pdev->dev, "xo_clock");
+	if (IS_ERR(msm_host->xo_clk)) {
+		ret = PTR_ERR(msm_host->xo_clk);
+		dev_warn(&pdev->dev, "TCXO clk not present (%d)\n", ret);
+	}
+
 	/* Vote for maximum clock rate for maximum performance */
 	ret = clk_set_rate(msm_host->clk, INT_MAX);
 	if (ret)

@@ -635,6 +692,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "MCI Version: 0x%08x, major: 0x%04x, minor: 0x%02x\n",
 		core_version, core_major, core_minor);
 
+	if (core_major == 1 && core_minor >= 0x42)
+		msm_host->use_14lpp_dll_reset = true;
+
 	/*
 	 * Support for some capabilities is not advertised by newer
 	 * controller versions and must be explicitly enabled.

index 2dcbeb0..fc093b8 100644
@@ -59,6 +59,10 @@
 #define CORE_DLL_CONFIG		0x100
 #define CORE_DLL_STATUS		0x108
 
+#define CORE_DLL_CONFIG_2	0x1b4
+#define CORE_FLL_CYCLE_CNT	BIT(18)
+#define CORE_DLL_CLOCK_DISABLE	BIT(21)
+
 #define CORE_VENDOR_SPEC	0x10c
 #define CORE_CLK_PWRSAVE	BIT(1)
 

@@ -77,7 +81,9 @@ struct sdhci_msm_host {
 	struct clk *clk;	/* main SD/MMC bus clock */
 	struct clk *pclk;	/* SDHC peripheral bus clock */
 	struct clk *bus_clk;	/* SDHC bus voter clock */
+	struct clk *xo_clk;	/* TCXO clk needed for FLL feature of cm_dll*/
 	struct mmc_host *mmc;
+	bool use_14lpp_dll_reset;
 };
 
 /* Platform specific tuning */

@@ -305,6 +311,8 @@ static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
 static int msm_init_cm_dll(struct sdhci_host *host)
 {
 	struct mmc_host *mmc = host->mmc;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 	int wait_cnt = 50;
 	unsigned long flags;
 	u32 config;

@@ -320,6 +328,16 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	config &= ~CORE_CLK_PWRSAVE;
 	writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
 
+	if (msm_host->use_14lpp_dll_reset) {
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+		config &= ~CORE_CK_OUT_EN;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config |= CORE_DLL_CLOCK_DISABLE;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
+	}
+
 	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
 	config |= CORE_DLL_RST;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);

@@ -329,6 +347,28 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 	msm_cm_dll_set_freq(host);
 
+	if (msm_host->use_14lpp_dll_reset &&
+	    !IS_ERR_OR_NULL(msm_host->xo_clk)) {
+		u32 mclk_freq = 0;
+
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config &= CORE_FLL_CYCLE_CNT;
+		if (config)
+			mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 8),
+					clk_get_rate(msm_host->xo_clk));
+		else
+			mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 4),
+					clk_get_rate(msm_host->xo_clk));
+
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config &= ~(0xFF << 10);
+		config |= mclk_freq << 10;
+
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
+		/* wait for 5us before enabling DLL clock */
+		udelay(5);
+	}
+
 	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
 	config &= ~CORE_DLL_RST;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);

@@ -337,6 +377,13 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	config &= ~CORE_DLL_PDN;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
+	if (msm_host->use_14lpp_dll_reset) {
+		msm_cm_dll_set_freq(host);
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+		config &= ~CORE_DLL_CLOCK_DISABLE;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
+	}
+
 	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
 	config |= CORE_DLL_EN;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);

@@ -590,6 +637,16 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		goto pclk_disable;
 	}
 
+	/*
+	 * xo clock is needed for FLL feature of cm_dll.
+	 * In case if xo clock is not mentioned in DT, warn and proceed.
+	 */
+	msm_host->xo_clk = devm_clk_get(&pdev->dev, "xo");
+	if (IS_ERR(msm_host->xo_clk)) {
+		ret = PTR_ERR(msm_host->xo_clk);
+		dev_warn(&pdev->dev, "TCXO clk not present (%d)\n", ret);
+	}
+
 	/* Vote for maximum clock rate for maximum performance */
 	ret = clk_set_rate(msm_host->clk, INT_MAX);
 	if (ret)

@@ -635,6 +692,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "MCI Version: 0x%08x, major: 0x%04x, minor: 0x%02x\n",
 		core_version, core_major, core_minor);
 
+	if (core_major == 1 && core_minor >= 0x42)
+		msm_host->use_14lpp_dll_reset = true;
+
 	/*
 	 * Support for some capabilities is not advertised by newer
 	 * controller versions and must be explicitly enabled.

index 518021d..45ead68 100644
@@ -592,7 +592,9 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
 static const struct sdhci_pltfm_data sdhci_msm_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_NO_CARD_NO_RESET |
-		  SDHCI_QUIRK_SINGLE_POWER_WRITE,
+		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_msm_ops,
 };
 

index d08d507..8a89d89 100644
@@ -1344,20 +1344,10 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
 }
 EXPORT_SYMBOL_GPL(sdhci_calc_clk);
 
-void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+void sdhci_enable_clock(struct sdhci_host *host, unsigned short clk)
 {
-	u16 clk;
 	unsigned long timeout;
 
-	host->mmc->actual_clock = 0;
-
-	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
-
-	if (clock == 0)
-		return;
-
-	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
-
 	clk |= SDHCI_CLOCK_INT_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 

@@ -1378,6 +1368,22 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 }
+EXPORT_SYMBOL_GPL(sdhci_enable_clock);
+
+void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	u16 clk;
+
+	host->mmc->actual_clock = 0;
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return;
+
+	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+	sdhci_enable_clock(host, clk);
+}
 EXPORT_SYMBOL_GPL(sdhci_set_clock);
 
 static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,

index 766df17..8e77a3b 100644
@@ -681,6 +681,7 @@ static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
 u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
 		   unsigned int *actual_clock);
 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
+void sdhci_enable_clock(struct sdhci_host *host, unsigned short clk);
 void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 		     unsigned short vdd);
 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,

index 45ead68..6d02fc2 100644
@@ -84,6 +84,7 @@ struct sdhci_msm_host {
 	struct clk *pclk;	/* SDHC peripheral bus clock */
 	struct clk *bus_clk;	/* SDHC bus voter clock */
 	struct clk *xo_clk;	/* TCXO clk needed for FLL feature of cm_dll*/
+	unsigned long clk_rate;
 	struct mmc_host *mmc;
 	bool use_14lpp_dll_reset;
 };

@@ -571,6 +572,69 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
 	return SDHCI_MSM_MIN_CLOCK;
 }
 
+/**
+ * __sdhci_msm_set_clock - sdhci_msm clock control.
+ *
+ * Description:
+ * MSM controller does not use internal divider and
+ * instead directly control the GCC clock as per
+ * HW recommendation.
+ **/
+void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	u16 clk;
+	/*
+	 * Keep actual_clock as zero -
+	 * - since there is no divider used so no need of having actual_clock.
+	 * - MSM controller uses SDCLK for data timeout calculation. If
+	 *   actual_clock is zero, host->clock is taken for calculation.
+	 */
+	host->mmc->actual_clock = 0;
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return;
+
+	/*
+	 * MSM controller do not use clock divider.
+	 * Thus read SDHCI_CLOCK_CONTROL and only enable
+	 * clock with no divider value programmed.
+	 */
+	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	sdhci_enable_clock(host, clk);
+}
+
+/* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */
+static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int rc;
+
+	if (!clock) {
+		msm_host->clk_rate = clock;
+		goto out;
+	}
+
+	spin_unlock_irq(&host->lock);
+
+	rc = clk_set_rate(msm_host->clk, clock);
+	if (rc) {
+		pr_err("%s: Failed to set clock at rate %u\n",
+		       mmc_hostname(host->mmc), clock);
+		goto out_lock;
+	}
+	msm_host->clk_rate = clock;
+	pr_debug("%s: Setting clock at rate %lu\n",
+		 mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
+
+out_lock:
+	spin_lock_irq(&host->lock);
+out:
+	__sdhci_msm_set_clock(host, clock);
+}
+
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{ .compatible = "qcom,sdhci-msm-v4" },
 	{},

@@ -581,7 +645,7 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
 static const struct sdhci_ops sdhci_msm_ops = {
 	.platform_execute_tuning = sdhci_msm_execute_tuning,
 	.reset = sdhci_reset,
-	.set_clock = sdhci_set_clock,
+	.set_clock = sdhci_msm_set_clock,
 	.get_min_clock = sdhci_msm_get_min_clock,
 	.get_max_clock = sdhci_msm_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,

index eb29b97..ab59171 100644
@@ -32,6 +32,7 @@
 #define HC_MODE_EN		0x1
 #define CORE_POWER		0x0
 #define CORE_SW_RST		BIT(7)
+#define FF_CLK_SW_RST_DIS	BIT(13)
 
 #define CORE_PWRCTL_STATUS	0xdc
 #define CORE_PWRCTL_MASK	0xe0

@@ -65,10 +66,17 @@
 
 #define CORE_VENDOR_SPEC	0x10c
 #define CORE_CLK_PWRSAVE	BIT(1)
+#define CORE_HC_MCLK_SEL_DFLT	(2 << 8)
+#define CORE_HC_MCLK_SEL_HS400	(3 << 8)
+#define CORE_HC_MCLK_SEL_MASK	(3 << 8)
+#define CORE_HC_SELECT_IN_EN	BIT(18)
+#define CORE_HC_SELECT_IN_HS400	(6 << 19)
+#define CORE_HC_SELECT_IN_MASK	(7 << 19)
 
 #define CORE_VENDOR_SPEC_CAPABILITIES0	0x11c
 
 #define SDHCI_MSM_MIN_CLOCK	400000
+#define CORE_FREQ_100MHZ	(100 * 1000 * 1000)
 
 #define CDR_SELEXT_SHIFT	20
 #define CDR_SELEXT_MASK		(0xf << CDR_SELEXT_SHIFT)

@@ -87,6 +95,8 @@ struct sdhci_msm_host {
 	unsigned long clk_rate;
 	struct mmc_host *mmc;
 	bool use_14lpp_dll_reset;
+	bool tuning_done;
+	bool calibration_done;
 };
 
 /* Platform specific tuning */

@@ -174,8 +184,8 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
  * Find out the greatest range of consecuitive selected
  * DLL clock output phases that can be used as sampling
  * setting for SD3.0 UHS-I card read operation (in SDR104
- * timing mode) or for eMMC4.5 card read operation (in HS200
- * timing mode).
+ * timing mode) or for eMMC4.5 card read operation (in
+ * HS400/HS200 timing mode).
  * Select the 3/4 of the range and configure the DLL with the
  * selected DLL clock output phase.
  */

@@ -424,9 +434,10 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 	 * Tuning is required for SDR104, HS200 and HS400 cards and
 	 * if clock frequency is greater than 100MHz in these modes.
 	 */
-	if (host->clock <= 100 * 1000 * 1000 ||
-	    !((ios.timing == MMC_TIMING_MMC_HS200) ||
-	      (ios.timing == MMC_TIMING_UHS_SDR104)))
+	if (host->clock <= CORE_FREQ_100MHZ ||
+	    !(ios.timing == MMC_TIMING_MMC_HS400 ||
+	    ios.timing == MMC_TIMING_MMC_HS200 ||
+	    ios.timing == MMC_TIMING_UHS_SDR104))
 		return 0;
 
 retry:

@@ -477,6 +488,8 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 		rc = -EIO;
 	}
 
+	if (!rc)
+		msm_host->tuning_done = true;
 	return rc;
 }
 

@@ -484,7 +497,10 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
 					unsigned int uhs)
 {
 	struct mmc_host *mmc = host->mmc;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 	u16 ctrl_2;
+	u32 config;
 
 	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 	/* Select Bus Speed Mode for host */

@@ -499,6 +515,7 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
 	case MMC_TIMING_UHS_SDR50:
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
 		break;
+	case MMC_TIMING_MMC_HS400:
 	case MMC_TIMING_MMC_HS200:
 	case MMC_TIMING_UHS_SDR104:
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;

@@ -515,11 +532,29 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
 	 * provide feedback clock, the mode selection can be any value less
 	 * than 3'b011 in bits [2:0] of HOST CONTROL2 register.
 	 */
-	if (host->clock <= 100000000 &&
-	    (uhs == MMC_TIMING_MMC_HS400 ||
-	     uhs == MMC_TIMING_MMC_HS200 ||
-	     uhs == MMC_TIMING_UHS_SDR104))
-		ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	if (host->clock <= CORE_FREQ_100MHZ) {
+		if (uhs == MMC_TIMING_MMC_HS400 ||
+		    uhs == MMC_TIMING_MMC_HS200 ||
+		    uhs == MMC_TIMING_UHS_SDR104)
+			ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+		/*
+		 * DLL is not required for clock <= 100MHz
+		 * Thus, make sure DLL it is disabled when not required
+		 */
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+		config |= CORE_DLL_RST;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+		config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+		config |= CORE_DLL_PDN;
+		writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+		/*
+		 * The DLL needs to be restored and CDCLP533 recalibrated
+		 * when the clock frequency is set back to 400MHz.
+		 */
+		msm_host->calibration_done = false;
+	}
 
 	dev_dbg(mmc_dev(mmc), "%s: clock=%u uhs=%u ctrl_2=0x%x\n",
 		mmc_hostname(host->mmc), host->clock, uhs, ctrl_2);

@@ -611,6 +646,7 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 	struct mmc_ios curr_ios = host->mmc->ios;
+	u32 config;
 	int rc;
 
 	if (!clock) {

@@ -629,6 +665,68 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 	    curr_ios.timing == MMC_TIMING_MMC_DDR52 ||
 	    curr_ios.timing == MMC_TIMING_MMC_HS400)
 		clock *= 2;
+	/*
+	 * In general all timing modes are controlled via UHS mode select in
+	 * Host Control2 register. eMMC specific HS200/HS400 doesn't have
+	 * their respective modes defined here, hence we use these values.
+	 *
+	 * HS200 - SDR104 (Since they both are equivalent in functionality)
+	 * HS400 - This involves multiple configurations
+	 *		Initially SDR104 - when tuning is required as HS200
+	 *		Then when switching to DDR @ 400MHz (HS400) we use
+	 *		the vendor specific HC_SELECT_IN to control the mode.
+	 *
+	 * In addition to controlling the modes we also need to select the
+	 * correct input clock for DLL depending on the mode.
+	 *
+	 * HS400 - divided clock (free running MCLK/2)
+	 * All other modes - default (free running MCLK)
+	 */
+	if (curr_ios.timing == MMC_TIMING_MMC_HS400) {
+		/* Select the divided clock (free running MCLK/2) */
+		config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
+		config &= ~CORE_HC_MCLK_SEL_MASK;
+		config |= CORE_HC_MCLK_SEL_HS400;
+
+		writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
+		/*
+		 * Select HS400 mode using the HC_SELECT_IN from VENDOR SPEC
+		 * register
+		 */
+		if (msm_host->tuning_done && !msm_host->calibration_done) {
+			/*
+			 * Write 0x6 to HC_SELECT_IN and 1 to HC_SELECT_IN_EN
+			 * field in VENDOR_SPEC_FUNC
+			 */
+			config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
+			config |= CORE_HC_SELECT_IN_HS400;
+			config |= CORE_HC_SELECT_IN_EN;
+			writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
+		}
+	} else {
+		config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
+		config &= ~CORE_HC_MCLK_SEL_MASK;
+		config |= CORE_HC_MCLK_SEL_DFLT;
+		writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
+
+		/*
+		 * Disable HC_SELECT_IN to be able to use the UHS mode select
+		 * configuration from Host Control2 register for all other
+		 * modes.
+		 * Write 0 to HC_SELECT_IN and HC_SELECT_IN_EN field
+		 * in VENDOR_SPEC_FUNC
+		 */
+		config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
+		config &= ~CORE_HC_SELECT_IN_EN;
+		config &= ~CORE_HC_SELECT_IN_MASK;
+		writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
+	}
+
+	/*
+	 * Make sure above writes impacting free running MCLK are completed
+	 * before changing the clk_rate at GCC.
+	 */
+	wmb();
 
 	rc = clk_set_rate(msm_host->clk, clock);
 	if (rc) {

@@ -776,6 +874,10 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	/* Set HC_MODE_EN bit in HC_MODE register */
 	writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
 
+	config = readl_relaxed(msm_host->core_mem + CORE_HC_MODE);
+	config |= FF_CLK_SW_RST_DIS;
+	writel_relaxed(config, msm_host->core_mem + CORE_HC_MODE);
+
 	host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
 	dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
 		host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>

index 47379f4..49907f4 100644
@@ -52,6 +52,7 @@
 #define INT_MASK		0xf
 #define MAX_PHASES		16
 #define CORE_DLL_LOCK		BIT(7)
+#define CORE_DDR_DLL_LOCK	BIT(11)
 #define CORE_DLL_EN		BIT(16)
 #define CORE_CDR_EN		BIT(17)
 #define CORE_CK_OUT_EN		BIT(18)

@@ -63,6 +64,7 @@
 #define CORE_DLL_STATUS		0x108
 
 #define CORE_DLL_CONFIG_2	0x1b4
+#define CORE_DDR_CAL_EN		BIT(0)
 #define CORE_FLL_CYCLE_CNT	BIT(18)
 #define CORE_DLL_CLOCK_DISABLE	BIT(21)
 

@@ -101,6 +103,11 @@
 #define CORE_DDR_200_CFG		0x184
 #define CORE_CDC_T4_DLY_SEL		BIT(0)
 #define CORE_START_CDC_TRAFFIC		BIT(6)
+#define CORE_VENDOR_SPEC3	0x1b0
+#define CORE_PWRSAVE_DLL	BIT(3)
+
+#define CORE_DDR_CONFIG		0x1b8
+#define DDR_CONFIG_POR_VAL	0x80040853
 
 #define CORE_VENDOR_SPEC_CAPABILITIES0	0x11c
 

@@ -128,6 +135,7 @@ struct sdhci_msm_host {
 	bool tuning_done;
 	bool calibration_done;
 	u8 saved_tuning_phase;
+	bool use_cdclp533;
 };
 
 /* Platform specific tuning */

@@ -569,6 +577,87 @@ static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host)
 	return ret;
 }
 
+static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host)
+{
+	u32 dll_status, config;
+	int ret;
+
+	pr_debug("%s: %s: Enter\n", mmc_hostname(host->mmc), __func__);
+
+	/*
+	 * Currently the CORE_DDR_CONFIG register defaults to desired
+	 * configuration on reset. Currently reprogramming the power on
+	 * reset (POR) value in case it might have been modified by
+	 * bootloaders. In the future, if this changes, then the desired
+	 * values will need to be programmed appropriately.
+	 */
+	writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + CORE_DDR_CONFIG);
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
+	config |= CORE_DDR_CAL_EN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
+
+	ret = readl_relaxed_poll_timeout(host->ioaddr + CORE_DLL_STATUS,
+					 dll_status,
+					 (dll_status & CORE_DDR_DLL_LOCK),
+					 10, 1000);
+
+	if (ret == -ETIMEDOUT) {
+		pr_err("%s: %s: CM_DLL_SDC4 calibration was not completed\n",
+		       mmc_hostname(host->mmc), __func__);
+		goto out;
+	}
+
+	config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC3);
+	config |= CORE_PWRSAVE_DLL;
+	writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC3);
+
+	/*
+	 * Drain writebuffer to ensure above DLL calibration
+	 * and PWRSAVE DLL is enabled.
+	 */
+	wmb();
+out:
+	pr_debug("%s: %s: Exit, ret %d\n", mmc_hostname(host->mmc),
+		 __func__, ret);
+	return ret;
+}
+
+static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+	u32 config;
+
+	pr_debug("%s: %s: Enter\n", mmc_hostname(host->mmc), __func__);
+
+	/*
+	 * Retuning in HS400 (DDR mode) will fail, just reset the
+	 * tuning block and restore the saved tuning phase.
+	 */
+	ret = msm_init_cm_dll(host);
+	if (ret)
+		goto out;
+
+	/* Set the selected phase in delay line hw block */
+	ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
+	if (ret)
+		goto out;
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_CMD_DAT_TRACK_SEL;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+	if (msm_host->use_cdclp533)
+		ret = sdhci_msm_cdclp533_calibration(host);
+	else
+		ret = sdhci_msm_cm_dll_sdc4_calibration(host);
+out:
+	pr_debug("%s: %s: Exit, ret %d\n", mmc_hostname(host->mmc),
+		 __func__, ret);
+	return ret;
+}
+
 static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 {
 	int tuning_seq_cnt = 3;

@@ -715,7 +804,7 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
 	if (host->clock > CORE_FREQ_100MHZ &&
 	    msm_host->tuning_done && !msm_host->calibration_done &&
 	    mmc->ios.timing == MMC_TIMING_MMC_HS400)
-		if (!sdhci_msm_cdclp533_calibration(host))
+		if (!sdhci_msm_hs400_dll_calibration(host))
 			msm_host->calibration_done = true;
 	spin_lock_irq(&host->lock);
 }

@@ -805,7 +894,7 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 	struct mmc_ios curr_ios = host->mmc->ios;
-	u32 config;
+	u32 config, dll_lock;
 	int rc;
 
 	if (!clock) {

@@ -862,7 +951,32 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 			config |= CORE_HC_SELECT_IN_EN;
 			writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
 		}
+		if (!msm_host->clk_rate && !msm_host->use_cdclp533) {
+			/*
+			 * Poll on DLL_LOCK or DDR_DLL_LOCK bits in
+			 * CORE_DLL_STATUS to be set.  This should get set
+			 * within 15 us at 200 MHz.
+			 */
+			rc = readl_relaxed_poll_timeout(host->ioaddr +
+							CORE_DLL_STATUS,
+							dll_lock,
+							(dll_lock &
+							(CORE_DLL_LOCK |
+							CORE_DDR_DLL_LOCK)), 10,
+							1000);
+			if (rc == -ETIMEDOUT)
+				pr_err("%s: Unable to get DLL_LOCK/DDR_DLL_LOCK, dll_status: 0x%08x\n",
+				       mmc_hostname(host->mmc), dll_lock);
+		}
 	} else {
+		if (!msm_host->use_cdclp533) {
+			config = readl_relaxed(host->ioaddr +
+					CORE_VENDOR_SPEC3);
+			config &= ~CORE_PWRSAVE_DLL;
+			writel_relaxed(config, host->ioaddr +
+					CORE_VENDOR_SPEC3);
+		}
+
 		config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
 		config &= ~CORE_HC_MCLK_SEL_MASK;
 		config |= CORE_HC_MCLK_SEL_DFLT;

@@ -1055,6 +1169,13 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		msm_host->use_14lpp_dll_reset = true;
 
 	/*
+	 * SDCC 5 controller with major version 1, minor version 0x34 and later
+	 * with HS 400 mode support will use CM DLL instead of CDC LP 533 DLL.
+	 */
+	if (core_major == 1 && core_minor < 0x34)
+		msm_host->use_cdclp533 = true;
+
+	/*
 	 * Support for some capabilities is not advertised by newer
 	 * controller versions and must be explicitly enabled.
 	 */

index b78d72f..2dcbeb0 100644
@@ -138,9 +138,9 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
 	config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT;
 	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
-	/* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
-			| CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_CK_OUT_EN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
 	/* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */
 	rc = msm_dll_poll_ck_out_en(host, 1);

@@ -307,6 +307,7 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	struct mmc_host *mmc = host->mmc;
 	int wait_cnt = 50;
 	unsigned long flags;
+	u32 config;
 
 	spin_lock_irqsave(&host->lock, flags);
 

@@ -315,33 +316,34 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	 * tuning is in progress. Keeping PWRSAVE ON may
 	 * turn off the clock.
 	 */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC)
-			& ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC);
+	config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
+	config &= ~CORE_CLK_PWRSAVE;
+	writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
 
-	/* Write 1 to DLL_RST bit of DLL_CONFIG register */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
-			| CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_DLL_RST;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
-	/* Write 1 to DLL_PDN bit of DLL_CONFIG register */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
-			| CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_DLL_PDN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 	msm_cm_dll_set_freq(host);
 
-	/* Write 0 to DLL_RST bit of DLL_CONFIG register */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
-			& ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~CORE_DLL_RST;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
-	/* Write 0 to DLL_PDN bit of DLL_CONFIG register */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
-			& ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~CORE_DLL_PDN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
-	/* Set DLL_EN bit to 1. */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
-			| CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG);
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_DLL_EN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
-	/* Set CK_OUT_EN bit to 1. */
-	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
-			| CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_CK_OUT_EN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
 
 	/* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */
 	while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) &

@@ -538,7 +540,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	struct resource *core_memres;
 	int ret;
 	u16 host_version, core_minor;
-	u32 core_version, caps;
+	u32 core_version, config;
 	u8 core_major;
 
 	host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host));

@@ -606,9 +608,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
-	/* Reset the core and Enable SDHC mode */
-	writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
-		       CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+	config = readl_relaxed(msm_host->core_mem + CORE_POWER);
+	config |= CORE_SW_RST;
+	writel_relaxed(config, msm_host->core_mem + CORE_POWER);
 
 	/* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
 	usleep_range(1000, 5000);

@@ -638,9 +640,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	 * controller versions and must be explicitly enabled.
 	 */
 	if (core_major >= 1 && core_minor != 0x11 && core_minor != 0x12) {
-		caps = readl_relaxed(host->ioaddr + SDHCI_CAPABILITIES);
-		caps |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT;
-		writel_relaxed(caps, host->ioaddr +
+		config = readl_relaxed(host->ioaddr + SDHCI_CAPABILITIES);
+		config |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT;
+		writel_relaxed(config, host->ioaddr +
 			       CORE_VENDOR_SPEC_CAPABILITIES0);
 	}
 

index 7e72105..518021d 100644
@@ -68,6 +68,8 @@
 
 #define CORE_VENDOR_SPEC_CAPABILITIES0	0x11c
 
+#define SDHCI_MSM_MIN_CLOCK	400000
+
 #define CDR_SELEXT_SHIFT	20
 #define CDR_SELEXT_MASK		(0xf << CDR_SELEXT_SHIFT)
 #define CMUX_SHIFT_PHASE_SHIFT	24

@@ -556,6 +558,19 @@ static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static unsigned int sdhci_msm_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+
+	return clk_round_rate(msm_host->clk, ULONG_MAX);
+}
+
+static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
+{
+	return SDHCI_MSM_MIN_CLOCK;
+}
+
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{ .compatible = "qcom,sdhci-msm-v4" },
 	{},

@@ -567,6 +582,8 @@ static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
 	.platform_execute_tuning = sdhci_msm_execute_tuning,
 	.reset = sdhci_reset,
 	.set_clock = sdhci_set_clock,
+	.get_min_clock = sdhci_msm_get_min_clock,
+	.get_max_clock = sdhci_msm_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.set_uhs_signaling = sdhci_msm_set_uhs_signaling,
 	.voltage_switch = sdhci_msm_voltage_switch,

index 6d02fc2..eb29b97 100644
@@ -610,6 +610,7 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	struct mmc_ios curr_ios = host->mmc->ios;
 	int rc;
 
 	if (!clock) {

@@ -618,16 +619,28 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 	}
 
 	spin_unlock_irq(&host->lock);
+	/*
+	 * The SDHC requires internal clock frequency to be double the
+	 * actual clock that will be set for DDR mode. The controller
+	 * uses the faster clock(100/400MHz) for some of its parts and
+	 * send the actual required clock (50/200MHz) to the card.
+	 */
+	if (curr_ios.timing == MMC_TIMING_UHS_DDR50 ||
+	    curr_ios.timing == MMC_TIMING_MMC_DDR52 ||
+	    curr_ios.timing == MMC_TIMING_MMC_HS400)
+		clock *= 2;
 
 	rc = clk_set_rate(msm_host->clk, clock);
 	if (rc) {
-		pr_err("%s: Failed to set clock at rate %u\n",
-		       mmc_hostname(host->mmc), clock);
+		pr_err("%s: Failed to set clock at rate %u at timing %d\n",
+		       mmc_hostname(host->mmc), clock,
+		       curr_ios.timing);
 		goto out_lock;
 	}
 	msm_host->clk_rate = clock;
-	pr_debug("%s: Setting clock at rate %lu\n",
-		 mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
+	pr_debug("%s: Setting clock at rate %lu at timing %d\n",
+		 mmc_hostname(host->mmc), clk_get_rate(msm_host->clk),
+		 curr_ios.timing);
 
 out_lock:
 	spin_lock_irq(&host->lock);

index ab59171..1556d45 100644
@@ -75,6 +75,7 @@
 
 #define CORE_VENDOR_SPEC_CAPABILITIES0	0x11c
 
+#define INVALID_TUNING_PHASE	-1
 #define SDHCI_MSM_MIN_CLOCK	400000
 #define CORE_FREQ_100MHZ	(100 * 1000 * 1000)
 

@@ -97,6 +98,7 @@ struct sdhci_msm_host {
 	bool use_14lpp_dll_reset;
 	bool tuning_done;
 	bool calibration_done;
+	u8 saved_tuning_phase;
 };
 
 /* Platform specific tuning */

@@ -136,6 +138,9 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
 	u32 config;
 	struct mmc_host *mmc = host->mmc;
 
+	if (phase > 0xf)
+		return -EINVAL;
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);

@@ -429,6 +434,8 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 	int rc;
 	struct mmc_host *mmc = host->mmc;
 	struct mmc_ios ios = host->mmc->ios;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 
 	/*
 	 * Tuning is required for SDR104, HS200 and HS400 cards and

@@ -453,6 +460,7 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 		if (rc)
 			return rc;
 
+		msm_host->saved_tuning_phase = phase;
 		rc = mmc_send_tuning(mmc, opcode, NULL);
 		if (!rc) {
 			/* Tuning is successful at this tuning point */

@@ -799,6 +807,8 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 
 	sdhci_get_of_property(pdev);
 
+	msm_host->saved_tuning_phase = INVALID_TUNING_PHASE;
+
 	/* Setup SDCC bus voter clock. */
 	msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
 	if (!IS_ERR(msm_host->bus_clk)) {

index 1556d45..47379f4 100644
@@ -20,6 +20,7 @@
 #include <linux/mmc/mmc.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
+#include <linux/iopoll.h>
 
 #include "sdhci-pltfm.h"
 

@@ -58,6 +59,7 @@
 #define CORE_DLL_PDN		BIT(29)
 #define CORE_DLL_RST		BIT(30)
 #define CORE_DLL_CONFIG		0x100
+#define CORE_CMD_DAT_TRACK_SEL	BIT(0)
 #define CORE_DLL_STATUS		0x108
 
 #define CORE_DLL_CONFIG_2	0x1b4

@@ -73,6 +75,33 @@
 #define CORE_HC_SELECT_IN_HS400	(6 << 19)
 #define CORE_HC_SELECT_IN_MASK	(7 << 19)
 
+#define CORE_CSR_CDC_CTLR_CFG0		0x130
+#define CORE_SW_TRIG_FULL_CALIB		BIT(16)
+#define CORE_HW_AUTOCAL_ENA		BIT(17)
+
+#define CORE_CSR_CDC_CTLR_CFG1		0x134
+#define CORE_CSR_CDC_CAL_TIMER_CFG0	0x138
+#define CORE_TIMER_ENA			BIT(16)
+
+#define CORE_CSR_CDC_CAL_TIMER_CFG1	0x13C
+#define CORE_CSR_CDC_REFCOUNT_CFG	0x140
+#define CORE_CSR_CDC_COARSE_CAL_CFG	0x144
+#define CORE_CDC_OFFSET_CFG		0x14C
+#define CORE_CSR_CDC_DELAY_CFG		0x150
+#define CORE_CDC_SLAVE_DDA_CFG		0x160
+#define CORE_CSR_CDC_STATUS0		0x164
+#define CORE_CALIBRATION_DONE		BIT(0)
+
+#define CORE_CDC_ERROR_CODE_MASK	0x7000000
+
+#define CORE_CSR_CDC_GEN_CFG		0x178
+#define CORE_CDC_SWITCH_BYPASS_OFF	BIT(0)
+#define CORE_CDC_SWITCH_RC_EN		BIT(1)
+
+#define CORE_DDR_200_CFG		0x184
+#define CORE_CDC_T4_DLY_SEL		BIT(0)
+#define CORE_START_CDC_TRAFFIC		BIT(6)
+
 #define CORE_VENDOR_SPEC_CAPABILITIES0	0x11c
 
 #define INVALID_TUNING_PHASE	-1

@@ -427,6 +456,119 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 	return 0;
 }
 
+static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	u32 config, calib_done;
+	int ret;
+
+	pr_debug("%s: %s: Enter\n", mmc_hostname(host->mmc), __func__);
+
+	/*
+	 * Retuning in HS400 (DDR mode) will fail, just reset the
+	 * tuning block and restore the saved tuning phase.
+	 */
+	ret = msm_init_cm_dll(host);
+	if (ret)
+		goto out;
+
+	/* Set the selected phase in delay line hw block */
+	ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
+	if (ret)
+		goto out;
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_CMD_DAT_TRACK_SEL;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+	config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG);
+	config &= ~CORE_CDC_T4_DLY_SEL;
+	writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG);
+
+	config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_GEN_CFG);
+	config &= ~CORE_CDC_SWITCH_BYPASS_OFF;
+	writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_GEN_CFG);
+
+	config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_GEN_CFG);
+	config |= CORE_CDC_SWITCH_RC_EN;
+	writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_GEN_CFG);
+
+	config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG);
+	config &= ~CORE_START_CDC_TRAFFIC;
+	writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG);
+
+	/*
+	 * Perform CDC Register Initialization Sequence
+	 *
+	 * CORE_CSR_CDC_CTLR_CFG0	0x11800EC
+	 * CORE_CSR_CDC_CTLR_CFG1	0x3011111
+	 * CORE_CSR_CDC_CAL_TIMER_CFG0	0x1201000
+	 * CORE_CSR_CDC_CAL_TIMER_CFG1	0x4
+	 * CORE_CSR_CDC_REFCOUNT_CFG	0xCB732020
+	 * CORE_CSR_CDC_COARSE_CAL_CFG	0xB19
+	 * CORE_CSR_CDC_DELAY_CFG	0x3AC
+	 * CORE_CDC_OFFSET_CFG		0x0
+	 * CORE_CDC_SLAVE_DDA_CFG	0x16334
+	 */
+
+	writel_relaxed(0x11800EC, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
+	writel_relaxed(0x3011111, host->ioaddr + CORE_CSR_CDC_CTLR_CFG1);
+	writel_relaxed(0x1201000, host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG0);
+	writel_relaxed(0x4, host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG1);
+	writel_relaxed(0xCB732020, host->ioaddr + CORE_CSR_CDC_REFCOUNT_CFG);
+	writel_relaxed(0xB19, host->ioaddr + CORE_CSR_CDC_COARSE_CAL_CFG);
+	writel_relaxed(0x3AC, host->ioaddr + CORE_CSR_CDC_DELAY_CFG);
+	writel_relaxed(0x0, host->ioaddr + CORE_CDC_OFFSET_CFG);
+	writel_relaxed(0x16334, host->ioaddr + CORE_CDC_SLAVE_DDA_CFG);
+
+	/* CDC HW Calibration */
+
+	config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
+	config |= CORE_SW_TRIG_FULL_CALIB;
+	writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
+
+	config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
+	config &= ~CORE_SW_TRIG_FULL_CALIB;
+	writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
+
+	config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
+	config |= CORE_HW_AUTOCAL_ENA;
+	writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
+
+	config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG0);
+	config |= CORE_TIMER_ENA;
+	writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG0);
+
+	ret = readl_relaxed_poll_timeout(host->ioaddr + CORE_CSR_CDC_STATUS0,
+					 calib_done,
+					 (calib_done & CORE_CALIBRATION_DONE),
+					 1, 50);
+
+	if (ret == -ETIMEDOUT) {
+		pr_err("%s: %s: CDC calibration was not completed\n",
+		       mmc_hostname(host->mmc), __func__);
+		goto out;
+	}
+
+	ret = readl_relaxed(host->ioaddr + CORE_CSR_CDC_STATUS0)
+			& CORE_CDC_ERROR_CODE_MASK;
+	if (ret) {
+		pr_err("%s: %s: CDC error code %d\n",
+		       mmc_hostname(host->mmc), __func__, ret);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG);
+	config |= CORE_START_CDC_TRAFFIC;
+	writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG);
+out:
+	pr_debug("%s: %s: Exit, ret %d\n", mmc_hostname(host->mmc),
+		 __func__, ret);
+	return ret;
+}
+
 static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 {
 	int tuning_seq_cnt = 3;

@@ -567,6 +709,15 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
 	dev_dbg(mmc_dev(mmc), "%s: clock=%u uhs=%u ctrl_2=0x%x\n",
 		mmc_hostname(host->mmc), host->clock, uhs, ctrl_2);
 	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+
+	spin_unlock_irq(&host->lock);
+	/* CDCLP533 HW calibration is only required for HS400 mode*/
+	if (host->clock > CORE_FREQ_100MHZ &&
+	    msm_host->tuning_done && !msm_host->calibration_done &&
+	    mmc->ios.timing == MMC_TIMING_MMC_HS400)
+		if (!sdhci_msm_cdclp533_calibration(host))
+			msm_host->calibration_done = true;
+	spin_lock_irq(&host->lock);
 }
 
 static void sdhci_msm_voltage_switch(struct sdhci_host *host)