Skip to contentSkip to conversation

usb: dwc2: Make sure we disconnect the gadget state

PATCH Superseded John Stultz 2 participants 2 messages Mar 3, 2017

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 usb: dwc2: Make sure we disconnect the gadget state

I had seen some odd behavior with HiKey's usb-gadget interface that I finally seemed to have chased down. Basically every other time I pluged in the OTG port, the gadget interface would properly initialize. The other times, I'd get a big WARN_ON in dwc2_hsotg_init_fifo() about the fifo_map not being clear.

Ends up if we don't disconnect the gadget state, the fifo-map doesn't get cleared properly, which causes WARN_ON messages and also results in the device not properly being setup as a gadget every other time the OTG port is connected.

So this patch adds a call to dwc2_hsotg_disconnect() in the reset path so the state is properly cleared.

With it, the gadget interface initializes properly on every plug in.

Cc Wei Xu <[email protected]>
Cc Guodong Xu <[email protected]>
Cc Amit Pundir <[email protected]>
Cc Rob Herring <[email protected]>
Cc John Youn <[email protected]>
Cc Douglas Anderson <[email protected]>
Cc Chen Yu <[email protected]>
Cc Felipe Balbi <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/dwc2/hcd.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/dwc2/hcd.c +1 -0
index a73722e..91ed5b6 100644
@@ -3264,6 +3264,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);
Signature · 1 line
2.7.4
#1 lore raw

Hello!

Quoted 3 lines · John Stultz

I had seen some odd behavior with HiKey's usb-gadget interface that I finally seemed to have chased down. Basically every other time I pluged in the OTG port, the gadget interface would

Plugged. Perhaps could be fixed while applying...

Quoted 14 lines

properly initialize. The other times, I'd get a big WARN_ON in dwc2_hsotg_init_fifo() about the fifo_map not being clear.

Ends up if we don't disconnect the gadget state, the fifo-map doesn't get cleared properly, which causes WARN_ON messages and also results in the device not properly being setup as a gadget every other time the OTG port is connected.

So this patch adds a call to dwc2_hsotg_disconnect() in the reset path so the state is properly cleared.

With it, the gadget interface initializes properly on every plug in.

Quoted 12 lines
Cc Wei Xu <[email protected]>
Cc Guodong Xu <[email protected]>
Cc Amit Pundir <[email protected]>
Cc Rob Herring <[email protected]>
Cc John Youn <[email protected]>
Cc Douglas Anderson <[email protected]>
Cc Chen Yu <[email protected]>
Cc Felipe Balbi <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>

[...]

MBR, Sergei