aplay: Fix error message when writing captured data
PATCH v2 1/1 aplay: Fix error message when writing captured data
Read can return less then requested bytes, but we treat this as an error.
Anyhow, errno is not updated in this case and we can end up with a confusing error message.
For example, when there is no room to write data into the output file we receive:
$ arecord -d 2000 -c 2 -r 192000 -f S16_LE -Dplughw:0,0 audio.wav Recording WAVE '/mnt/msc/audio.wav' : Signed 16 bit Little Endian, Rate 192000 Hz, Stereo audio.wav: No such file or directory
--- aplay/aplay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
aplay/aplay.c +1 -1
@@ -3079,7 +3079,7 @@ static void capture(char *orig_name)break ; }if (write (fd, audiobuf, c) != c) { -perror (name); +fprintf (stderr,_ ("Couldn't write all data to %s\n" ), name); in_aborting =1 ;break ; }
Signature · 1 line
2.7.4
Quoted 3 lines · Daniel Baluta
Read can return less then requested bytes, but we treat this as an error.
Actually that's the bug -- we should loop the write until it reaches to the real error. Once when we get the proper errno, the error message via perror() itself will be enough.
thanks,
Takashi
Quoted 32 lines
Anyhow, errno is not updated in this case and we can end up with a confusing error message.
For example, when there is no room to write data into the output file we receive:
$ arecord -d 2000 -c 2 -r 192000 -f S16_LE -Dplughw:0,0 audio.wav Recording WAVE '/mnt/msc/audio.wav' : Signed 16 bit Little Endian, Rate 192000 Hz, Stereo audio.wav: No such file or directorySigned-off-by Daniel Baluta <[email protected]>--- aplay/aplay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)aplay/aplay.c +1
-1@@ -3079,7 +3079,7 @@ static void capture(char *orig_name)break ; }if (write (fd, audiobuf, c) != c) { -perror (name); +fprintf (stderr,_ ("Couldn't write all data to %s\n" ), name); in_aborting =1 ;break ; }Signature · 1 line
2.7.4
Quoted 6 lines · Takashi Iwai
Quoted 3 lines · Daniel Baluta
Read can return less then requested bytes, but we treat this as an error.
s/read/write here :)).
Quoted 3 lines
Actually that's the bug -- we should loop the write until it reaches to the real error. Once when we get the proper errno, the error message via
perror()itself will be enough.
Correct. But I think aplay decided to keep things simple and fail in case couldn't write all requested bytes.
This pattern can be noticed all over the places where write is used.
Given the fact that write is blocking (meaning that it must write at least one byte until return) this should work most of the time, excepting corner cases like disk full, etc.
thanks,
Daniel.
Quoted 8 lines · Daniel Baluta
Quoted 6 lines · Takashi Iwai
Quoted 3 lines · Daniel Baluta
Read can return less then requested bytes, but we treat this as an error.
Quoted 8 lines
s/read/write here :)).
Quoted 3 lines
Actually that's the bug -- we should loop the write until it reaches to the real error. Once when we get the proper errno, the error message via
perror()itself will be enough.Correct. But I think aplay decided to keep things simple and fail in case couldn't write all requested bytes.
And that's wrong. We should loop instead.
Quoted 1 line
This pattern can be noticed all over the places where write is used.
All wrong :)
We can implement a simple helper function and replace each write call with it.
Quoted 3 lines
Given the fact that write is blocking (meaning that it must write at least one byte until return) this should work most of the time, excepting corner cases like disk full, etc.
Yes, and such corner cases must be handled properly, too -- in the end, it's what you wanted to achieve by your patch, but into a different direction.
Takashi
Quoted 28 lines · Takashi Iwai
Quoted 8 lines · Daniel Baluta
Quoted 6 lines · Takashi Iwai
Quoted 3 lines · Daniel Baluta
Read can return less then requested bytes, but we treat this as an error.
Quoted 8 lines
s/read/write here :)).
Quoted 3 lines
Actually that's the bug -- we should loop the write until it reaches to the real error. Once when we get the proper errno, the error message via
perror()itself will be enough.Correct. But I think aplay decided to keep things simple and fail in case couldn't write all requested bytes.
And that's wrong. We should loop instead.
Quoted 1 line
This pattern can be noticed all over the places where write is used.
All wrong :)
We can implement a simple helper function and replace each write call with it.
Quoted 7 lines
Quoted 3 lines
Given the fact that write is blocking (meaning that it must write at least one byte until return) this should work most of the time, excepting corner cases like disk full, etc.
Yes, and such corner cases must be handled properly, too -- in the end, it's what you wanted to achieve by your patch, but into a different direction.
:), all right. Will fix this the correct way and resend.
thanks,
Daniel.