Skip to contentSkip to conversation

ocfs2: give an obvious tip for dismatch cluster names

PATCH Superseded Gang He 2 participants 5 messages May 18, 2017 – May 19, 2017 OCFS2

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Gang He

author
#0 lore raw

PATCH 1/1 ocfs2: give an obvious tip for dismatch cluster names

This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume() function, since ocfs2_dismount_volume() will also print it's own message.

---
 fs/ocfs2/super.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/ocfs2/super.c +6 -2
index ca1646f..5575918 100644
@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 read_super_error:
 	brelse(bh);
 
+	if (status)
+		mlog_errno(status);
+
 	if (osb) {
 		atomic_set(&osb->vol_state, VOLUME_DISABLED);
 		wake_up(&osb->osb_mount_event);
 		ocfs2_dismount_volume(sb, 1);
 	}
 
-	if (status)
-		mlog_errno(status);
 	return status;
 }
 
@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb)
 	status = ocfs2_dlm_init(osb);
 	if (status < 0) {
 		mlog_errno(status);
+		if (status == -EBADR)
+			mlog(ML_ERROR, "couldn't mount because cluster name on"
+			" disk does not match the running cluster name.\n");
 		goto leave;
 	}
 
Signature · 1 line
1.8.5.6
#1 lore raw

Hi Gang,

How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).

Thanks,
Joseph

Quoted 47 lines · Gang He

This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume() function, since ocfs2_dismount_volume() will also print it's own message.

---
 fs/ocfs2/super.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/ocfs2/super.c +6 -2
index ca1646f..5575918 100644
@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 read_super_error:
 	brelse(bh);
 
+	if (status)
+		mlog_errno(status);
+
 	if (osb) {
 		atomic_set(&osb->vol_state, VOLUME_DISABLED);
 		wake_up(&osb->osb_mount_event);
 		ocfs2_dismount_volume(sb, 1);
 	}
 
-	if (status)
-		mlog_errno(status);
 	return status;
 }
 
@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb)
 	status = ocfs2_dlm_init(osb);
 	if (status < 0) {
 		mlog_errno(status);
+		if (status == -EBADR)
+			mlog(ML_ERROR, "couldn't mount because cluster name on"
+			" disk does not match the running cluster name.\n");
 		goto leave;
 	}
 
author
#2 lore raw

Hi Joseph,

Quoted 5 lines
Quoted 1 line
Quoted 1 line

Hi Gang,

How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).

I looked through all the code of OCFS2 (include o2cb), there is not any place which returns this error.
In fact, the function calling patch ocfs2_fill_super -> ocfs2_mount_volume -> ocfs2_dlm_init -> dlm_new_lockspace is very specific path, we can use this errorno to give the uses a more clear tip,
since this case looks like a little common during cluster migration, but the customer can quickly
get the failure cause if there is a error printing.
Also, I think there is not possible to add this errorno in o2cb path during ocfs2_dlm_init, since o2cb code has been stable for a long time.

Thanks
Gang

Quoted 53 lines

Thanks,
Joseph

fs/ocfs2/super.c static int ocfs2_fill_super(struct super_block *sb,

Quoted 19 lines · Gang He

This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume() function, since ocfs2_dismount_volume() will also print it's own message.

---
 fs/ocfs2/super.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/ocfs2/super.c +0 -0
index ca1646f..5575918 100644
@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb, 

void *data, int silent)

Quoted 28 lines
fs/ocfs2/super.c +6 -2
 read_super_error:
 	brelse(bh);
 
+	if (status)
+		mlog_errno(status);
+
 	if (osb) {
 		atomic_set(&osb->vol_state, VOLUME_DISABLED);
 		wake_up(&osb->osb_mount_event);
 		ocfs2_dismount_volume(sb, 1);
 	}
 
-	if (status)
-		mlog_errno(status);
 	return status;
 }
 
@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb)
 	status = ocfs2_dlm_init(osb);
 	if (status < 0) {
 		mlog_errno(status);
+		if (status == -EBADR)
+			mlog(ML_ERROR, "couldn't mount because cluster name on"
+			" disk does not match the running cluster name.\n");
 		goto leave;
 	}
 
#3 lore raw

Hi Gang,

As you described, only fsdlm will return this error and fsdlm has already print the same message. So why should we add it outside again?

Thanks,
Joseph

Quoted 73 lines · Gang He

Hi Joseph,

Quoted 5 lines
Quoted 1 line
Quoted 1 line

Hi Gang,

How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).

I looked through all the code of OCFS2 (include o2cb), there is not any place which returns this error.
In fact, the function calling patch ocfs2_fill_super -> ocfs2_mount_volume -> ocfs2_dlm_init -> dlm_new_lockspace is very specific path, we can use this errorno to give the uses a more clear tip,
since this case looks like a little common during cluster migration, but the customer can quickly
get the failure cause if there is a error printing.
Also, I think there is not possible to add this errorno in o2cb path during ocfs2_dlm_init, since o2cb code has been stable for a long time.

Thanks
Gang

Quoted 53 lines

Thanks,
Joseph

fs/ocfs2/super.c static int ocfs2_fill_super(struct super_block *sb,

Quoted 19 lines · Gang He

This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume() function, since ocfs2_dismount_volume() will also print it's own message.

---
 fs/ocfs2/super.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/ocfs2/super.c +0 -0
index ca1646f..5575918 100644
@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb, 

void *data, int silent)

Quoted 28 lines
fs/ocfs2/super.c +6 -2
 read_super_error:
 	brelse(bh);
 
+	if (status)
+		mlog_errno(status);
+
 	if (osb) {
 		atomic_set(&osb->vol_state, VOLUME_DISABLED);
 		wake_up(&osb->osb_mount_event);
 		ocfs2_dismount_volume(sb, 1);
 	}
 
-	if (status)
-		mlog_errno(status);
 	return status;
 }
 
@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb)
 	status = ocfs2_dlm_init(osb);
 	if (status < 0) {
 		mlog_errno(status);
+		if (status == -EBADR)
+			mlog(ML_ERROR, "couldn't mount because cluster name on"
+			" disk does not match the running cluster name.\n");
 		goto leave;
 	}
 
author
#4 lore raw

Hello Joseph,

Quoted 5 lines
Quoted 1 line
Quoted 1 line

Hi Gang,

As you described, only fsdlm will return this error and fsdlm has already print the same message. So why should we add it outside again?

Yes, DLM kernel module has printed a message in this case, likes "dlm: dlm cluster name XXX mismatch YYY",
then return error to ocfs2 layer, but the user can not understand the error meanings from this message, usually ignore this tip. then, I submitted a new printing in DLM kernel module likes "dlm cluster name '%s' does not match the application cluster name '%s'", it maybe can help the user a little, but the user still can not find the real cause in file system layer easily, since DLM kernel module can be used by any upper applications (not only for ocfs2).
So, that is why I want to add a obvious error message in file system layer,
in this layer we can tell the user the reason is there is a cluster name dismatch between on disk and on the running cluster environment.

Thanks
Gang

Quoted 83 lines

Thanks,
Joseph

Quoted 9 lines · Gang He

Hi Joseph,

Quoted 5 lines
Quoted 1 line
Quoted 1 line

Hi Gang,

How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).

I looked through all the code of OCFS2 (include o2cb), there is not any

place which returns this error.

Quoted 1 line

In fact, the function calling patch ocfs2_fill_super -> ocfs2_mount_volume ->

ocfs2_dlm_init -> dlm_new_lockspace

Quoted 1 line

is very specific path, we can use this errorno to give the uses a more clear

tip,

Quoted 1 line

since this case looks like a little common during cluster migration, but the

customer can quickly

Quoted 2 lines

get the failure cause if there is a error printing.
Also, I think there is not possible to add this errorno in o2cb path during

ocfs2_dlm_init, since o2cb code has been stable for

Quoted 59 lines

a long time.

Thanks
Gang

Quoted 53 lines

Thanks,
Joseph

fs/ocfs2/super.c static int ocfs2_fill_super(struct super_block *sb,

Quoted 19 lines · Gang He

This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume() function, since ocfs2_dismount_volume() will also print it's own message.

---
 fs/ocfs2/super.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/ocfs2/super.c +0 -0
index ca1646f..5575918 100644
@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb, 

void *data, int silent)

Quoted 28 lines
fs/ocfs2/super.c +6 -2
 read_super_error:
 	brelse(bh);
 
+	if (status)
+		mlog_errno(status);
+
 	if (osb) {
 		atomic_set(&osb->vol_state, VOLUME_DISABLED);
 		wake_up(&osb->osb_mount_event);
 		ocfs2_dismount_volume(sb, 1);
 	}
 
-	if (status)
-		mlog_errno(status);
 	return status;
 }
 
@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb)
 	status = ocfs2_dlm_init(osb);
 	if (status < 0) {
 		mlog_errno(status);
+		if (status == -EBADR)
+			mlog(ML_ERROR, "couldn't mount because cluster name on"
+			" disk does not match the running cluster name.\n");
 		goto leave;
 	}