ocfs2: give an obvious tip for dismatch cluster names
PATCH 1/1 ocfs2: give an obvious tip for dismatch cluster names
This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing ocfs2_fill_super() errno to the front of ocfs2_dismount_volume() function, since ocfs2_dismount_volume() will also print it's own message.
--- fs/ocfs2/super.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
fs/ocfs2/super.c +6 -2
@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) read_super_error:brelse (bh); +if (status) +mlog_errno (status); +if (osb) {atomic_set (&osb->vol_state,VOLUME_DISABLED );wake_up (&osb->osb_mount_event);ocfs2_dismount_volume (sb,1 ); } -if (status) -mlog_errno (status);return status; }
@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb) status =ocfs2_dlm_init (osb);if (status <0 ) {mlog_errno (status); +if (status == -EBADR ) +mlog (ML_ERROR ,"couldn't mount because cluster name on" +" disk does not match the running cluster name.\n" ); goto leave; }
Signature · 1 line
1.8.5.6
Hi Gang,
How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).
Thanks,
Joseph
Quoted 47 lines · Gang He
This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing
ocfs2_fill_super()errno to the front ofocfs2_dismount_volume()function, sinceocfs2_dismount_volume()will also print it's own message.Signed-off-by Gang He <[email protected]>--- fs/ocfs2/super.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)fs/ocfs2/super.c +6
-2@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) read_super_error:brelse (bh); +if (status) +mlog_errno (status); +if (osb) {atomic_set (&osb->vol_state,VOLUME_DISABLED );wake_up (&osb->osb_mount_event);ocfs2_dismount_volume (sb,1 ); } -if (status) -mlog_errno (status);return status; }@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb) status =ocfs2_dlm_init (osb);if (status <0 ) {mlog_errno (status); +if (status == -EBADR ) +mlog (ML_ERROR ,"couldn't mount because cluster name on" +" disk does not match the running cluster name.\n" ); goto leave; }
Hi Joseph,
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Hi Gang,
How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).
I looked through all the code of OCFS2 (include o2cb), there is not any place which returns this error.
In fact, the function calling patch ocfs2_fill_super -> ocfs2_mount_volume -> ocfs2_dlm_init -> dlm_new_lockspace is very specific path, we can use this errorno to give the uses a more clear tip,
since this case looks like a little common during cluster migration, but the customer can quickly
get the failure cause if there is a error printing.
Also, I think there is not possible to add this errorno in o2cb path during ocfs2_dlm_init, since o2cb code has been stable for a long time.
Thanks
Gang
Quoted 53 lines
Thanks,
Josephfs/ocfs2/super.c static int ocfs2_fill_super(struct super_block *sb,
Quoted 19 lines · Gang He
This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing
ocfs2_fill_super()errno to the front ofocfs2_dismount_volume()function, sinceocfs2_dismount_volume()will also print it's own message.Signed-off-by Gang He <[email protected]>--- fs/ocfs2/super.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)fs/ocfs2/super.c +0
-0@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb,void *data, int silent)
Quoted 28 lines
fs/ocfs2/super.c +6
-2read_super_error:brelse (bh); +if (status) +mlog_errno (status); +if (osb) {atomic_set (&osb->vol_state,VOLUME_DISABLED );wake_up (&osb->osb_mount_event);ocfs2_dismount_volume (sb,1 ); } -if (status) -mlog_errno (status);return status; }@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb) status =ocfs2_dlm_init (osb);if (status <0 ) {mlog_errno (status); +if (status == -EBADR ) +mlog (ML_ERROR ,"couldn't mount because cluster name on" +" disk does not match the running cluster name.\n" ); goto leave; }
Hi Gang,
As you described, only fsdlm will return this error and fsdlm has already print the same message. So why should we add it outside again?
Thanks,
Joseph
Quoted 73 lines · Gang He
Hi Joseph,
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Hi Gang,
How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).
I looked through all the code of OCFS2 (include o2cb), there is not any place which returns this error.
In fact, the function calling patchocfs2_fill_super->ocfs2_mount_volume->ocfs2_dlm_init->dlm_new_lockspaceis very specific path, we can use this errorno to give the uses a more clear tip,
since this case looks like a little common during cluster migration, but the customer can quickly
get the failure cause if there is a error printing.
Also, I think there is not possible to add this errorno in o2cb path duringocfs2_dlm_init, since o2cb code has been stable for a long time.Thanks
GangQuoted 53 lines
Thanks,
Josephfs/ocfs2/super.c static int ocfs2_fill_super(struct super_block *sb,
Quoted 19 lines · Gang He
This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing
ocfs2_fill_super()errno to the front ofocfs2_dismount_volume()function, sinceocfs2_dismount_volume()will also print it's own message.Signed-off-by Gang He <[email protected]>--- fs/ocfs2/super.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)fs/ocfs2/super.c +0
-0@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb,void *data, int silent)
Quoted 28 lines
fs/ocfs2/super.c +6
-2read_super_error:brelse (bh); +if (status) +mlog_errno (status); +if (osb) {atomic_set (&osb->vol_state,VOLUME_DISABLED );wake_up (&osb->osb_mount_event);ocfs2_dismount_volume (sb,1 ); } -if (status) -mlog_errno (status);return status; }@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb) status =ocfs2_dlm_init (osb);if (status <0 ) {mlog_errno (status); +if (status == -EBADR ) +mlog (ML_ERROR ,"couldn't mount because cluster name on" +" disk does not match the running cluster name.\n" ); goto leave; }
Hello Joseph,
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Hi Gang,
As you described, only fsdlm will return this error and fsdlm has already print the same message. So why should we add it outside again?
Yes, DLM kernel module has printed a message in this case, likes "dlm: dlm cluster name XXX mismatch YYY",
then return error to ocfs2 layer, but the user can not understand the error meanings from this message, usually ignore this tip. then, I submitted a new printing in DLM kernel module likes "dlm cluster name '%s' does not match the application cluster name '%s'", it maybe can help the user a little, but the user still can not find the real cause in file system layer easily, since DLM kernel module can be used by any upper applications (not only for ocfs2).
So, that is why I want to add a obvious error message in file system layer,
in this layer we can tell the user the reason is there is a cluster name dismatch between on disk and on the running cluster environment.
Thanks
Gang
Quoted 83 lines
Thanks,
JosephQuoted 9 lines · Gang He
Hi Joseph,
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Hi Gang,
How can we confirm EBADR is only because cluster name mismatch? Since the cluster stack may be o2cb(o2dlm) or user(fsdlm).
I looked through all the code of OCFS2 (include o2cb), there is not any
place which returns this error.
Quoted 1 line
In fact, the function calling patch
ocfs2_fill_super->ocfs2_mount_volume->
ocfs2_dlm_init->dlm_new_lockspaceQuoted 1 line
is very specific path, we can use this errorno to give the uses a more clear
tip,
Quoted 1 line
since this case looks like a little common during cluster migration, but the
customer can quickly
Quoted 2 lines
get the failure cause if there is a error printing.
Also, I think there is not possible to add this errorno in o2cb path during
ocfs2_dlm_init, since o2cb code has been stable forQuoted 59 lines
a long time.
Thanks
GangQuoted 53 lines
Thanks,
Josephfs/ocfs2/super.c static int ocfs2_fill_super(struct super_block *sb,
Quoted 19 lines · Gang He
This patch is used to add an obvious error message, due to dismatch cluster names between on-disk and in the current cluster. We can meet this case during OCFS2 cluster migration, if we can give the user an obvious tip for why they can not mount the file system after migration, they can quickly fix this dismatch problem. Second, also move printing
ocfs2_fill_super()errno to the front ofocfs2_dismount_volume()function, sinceocfs2_dismount_volume()will also print it's own message.Signed-off-by Gang He <[email protected]>--- fs/ocfs2/super.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)fs/ocfs2/super.c +0
-0@@ -1208,14 +1208,15 @@ static int ocfs2_fill_super(struct super_block *sb,void *data, int silent)
Quoted 28 lines
fs/ocfs2/super.c +6
-2read_super_error:brelse (bh); +if (status) +mlog_errno (status); +if (osb) {atomic_set (&osb->vol_state,VOLUME_DISABLED );wake_up (&osb->osb_mount_event);ocfs2_dismount_volume (sb,1 ); } -if (status) -mlog_errno (status);return status; }@@ -1843,6 +1844,9 @@ static int ocfs2_mount_volume(struct super_block *sb) status =ocfs2_dlm_init (osb);if (status <0 ) {mlog_errno (status); +if (status == -EBADR ) +mlog (ML_ERROR ,"couldn't mount because cluster name on" +" disk does not match the running cluster name.\n" ); goto leave; }