How can I use yaffs2 in uboot
Thank you for your help
NOW with absolute path can write and read (small files)
but When I write large files,such as 50M (Nand flash size is 256M)
Display
yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
...
(Many)
and then restart
my2440 # yls /fash
yaffs: Mounting /flash
yaffs: Could not allocate Tnodes
Error mounting /flash, return value: -12
opendir failed
Quoted 13 lines · jackfriend
Thank you for your help
NOW with absolute path can write and read (small files)Good.
but When I write large files,such as 50M (Nand flash size is 256M)
...
yaffs: Mounting /flash
yaffs: Could not allocate Tnodes
Error mounting /flash, return value: -12
Quoted 3 lines
opendir failed
I cannot recall having seen that error, but I don't think I have ever tried
with files larger than 20MB. Besides our out of tree port have started to slightly move away from upstream U-boot.
I suggest you try to debug your problem. "yaffs_traceMask" in fs/yaffs/yaffscfg.c is probably your friend.
Best regards
William Juul
_______________________________________________
Quoted 4 lines
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear jackfriend,
Quoted 5 lines · In message <[email protected]> you wrote:
Thank you for your help
NOW with absolute path can write and read (small files)
Quoted 8 lines
but When I write large files,such as 50M (Nand flash size is 256M)
Display
yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
...
Sounds like a pretty clear error message - doesn't it?
Increase CONFIG_SYS_MALLOC_LEN in your bard config file.
[It might make sense to improve the error message in fs/yaffs2/yaffs_guts.c to include information how many bytes were to be allocated, so you get an idea on how uch to increase the malloc arena size.]
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "There is no distinctly American criminal class except Congress." - Mark Twain