Skip to contentSkip to conversation

How can I use yaffs2 in uboot

U-Boot jackfriend 3 participants 3 messages Jun 8, 2010

lore
Share & tools
lore

jackfriend

author
#0 lore raw

Thank you for your help

NOW with absolute path can write and read (small files)

but When I write large files,such as 50M (Nand flash size is 256M)

Display

yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
...
(Many)

and then restart

my2440 # yls /fash

yaffs: Mounting /flash

yaffs: Could not allocate Tnodes

Error mounting /flash, return value: -12

opendir failed

#1 lore raw
Quoted 13 lines · jackfriend

Thank you for your help
NOW with absolute path can write and read (small files)

Good.

but When I write large files,such as 50M (Nand flash size is 256M)
...
yaffs: Mounting /flash
yaffs: Could not allocate Tnodes
Error mounting /flash, return value: -12

Quoted 3 lines

opendir failed

I cannot recall having seen that error, but I don't think I have ever tried

with files larger than 20MB. Besides our out of tree port have started to slightly move away from upstream U-boot.

I suggest you try to debug your problem. "yaffs_traceMask" in fs/yaffs/yaffscfg.c is probably your friend.

Best regards
William Juul

_______________________________________________

Quoted 4 lines

U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#2 lore raw
In reply to jackfriend

Dear jackfriend,

Quoted 5 lines · In message <[email protected]> you wrote:

Thank you for your help

NOW with absolute path can write and read (small files)

Quoted 8 lines

but When I write large files,such as 50M (Nand flash size is 256M)

Display

yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
yaffs: Could not allocate Tnodes
...

Sounds like a pretty clear error message - doesn't it?

Increase CONFIG_SYS_MALLOC_LEN in your bard config file.

[It might make sense to improve the error message in fs/yaffs2/yaffs_guts.c to include information how many bytes were to be allocated, so you get an idea on how uch to increase the malloc arena size.]

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"There is no distinctly American criminal class except Congress."
- Mark Twain